tender document for supply and installation of recording ... studio equipments.pdf · video...
TRANSCRIPT
pÉÉUiÉÏrÉ xÉÔcÉlÉÉ mÉëÉæ±ÉåÌaÉMüÐ AÍpÉMüsmÉlÉÉLuÉÇ ÌuÉÌlÉqÉÉïhÉ xÉÇxjÉÉlÉ MüÉÇcÉÏmÉÑUqÉ
Indian Institute of Information Technology, Design and
Manufacturing Kancheepuram, Melakkottaiyur,
Chennai – 600 127, Tamil Nadu, India
Tender Document
For
Supply and Installation of Recording Studio Equipments
Date: 19.02.2020
Item : Supply and Installation of Recording Studio Equipments
(Specification and quantity enclosed as Annexure)
Tender Enquiry No : IIITDMK/19-20/S&P/Recording Studio Equipments/034
EMD :
Bidders are to execute a Bid declaration accepting that if they withdraw or modify their Bids during the period of validity, or if they are awarded the contract they will be debarred for the period of one year for bidding for any tender of the Institute. Further, the debarment will be intimated to all department of government of India/ governmental organizations for bidding by the firm for any tender.
(declaration format enclosed)
Submission of Offer :
Two Bid System:
Two bid system will be followed in this tender. In this system the bidder must submit his offer in two separate sealed envelopes. Both the technical bid and commercial bid envelopes should be securely sealed and stamped separately and clearly marked as “Envelope No: 1 - Technical Bid” and “Envelope No: 2 - Commercial Bid” respectively.
BID declaration form should be placed in the Technical Bid. This two separate sealed envelopes should be placed in single envelope superscribing the tender No and description of the item.
Due Date
(For submission of bids) :
03: 00 PM, 5th March 2020
(any bid received after the due date and time by any means will be summarily rejected)
Opening of Technical Bid
: 04:00 PM, 5th March 2020
Place of Submission of Bid
:
The Registrar,
Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram,
Off Vandalur – Kelambakkam Road,
Melakkottaiyur, Chennai – 600 127.
Important : All communications are to be addressed to in the name of Registrar, IIITD&M
Kancheepuram only and not in the name of any officer and mails has to be sent to official purchase email id [email protected]
Terms and Conditions
1. The Bidders are requested to give detailed tender in two bid format.
Envelope-I : Technical Bid
Envelope-II : Commercial Bid
2. The bidder has to accept all terms and conditions of the Institute and conditional offers will
not be accepted.
3. The tender document can be downloaded from the IIITD&M Kancheepuram website
www.iiitdm.ac.in at free of cost. The duly filled tenders should be submitted to Registrar,
Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, Off
Vandalur – Kelambakkam Road, Melakkottaiyur, Chennai – 600 127 on or before due date
3.00 PM, 05.03.2020. Extension of due date will not be entertained.
4. Tenders which are submitted without following the two bid offer system will summarily be
rejected.
5. Envelope No-1 : Technical Bid
i) Bid declaration form.
ii) The leaflet / catalogue in original etc. of the product quoted.
iii) Bids should have a validity of 60 days. The technical offer should not contain any price
information.
6. Envelope No-2 : Commercial Bid
This should contain only the price information along with commercial terms and conditions.
7. Opening of Technical Bids
The technical bids will be opened on the scheduled date in the presence of the bidders or
their authorized representatives who choose to attend the technical bid opening.
8. Technical Evaluation
i) All the technical aspects of the bids will be evaluated for suitability and specification. If
required, the Institute may seek additional clarification from the bidders.
ii) The technical recommendation shall be final and binding on all the parties.
iii) The technically qualified firms will be intimated about Price Bid opening by email.
9. Opening of Commercial Bids
IIITD&M Kancheepuram will open commercial bids of only the shortlisted bidders in
technical evaluation in the presence of the bidders or their authorized representatives who
choose to attend the commercial bid opening. The representatives of shortlisted firms only
will be allowed for commercial bid opening.
10. Price
The price should be quoted in INR only. GST payable extra.
11. Delivery Period / Timelines
The deliveries and installation must be completed within 2 weeks from the date of
purchase order. The time is the essence of the contract. It is mandatory for the bidders who
respond to this bid to meet this expectation, as this is linked to student’s Labs / classes.
12. Supply & services
i) The items covered by this document is required to be supplied and installed at Indian
Institute of Information Technology, Design and Manufacturing, Kancheepuram, Off
Vandalur-Kelambakkam Road, Melakkottaiyur, Chennai – 600 127, Tamil Nadu.
ii) IIITD&M Kancheepuram will not provide any accommodation / transportation for the
engineers / representatives for attending installation, commissioning and
demonstration work. It is the absolute responsibility of the principal supplier / agent to
make their own arrangements.
13. Installation
i) Bidder shall be responsible for installation / demonstration as applicable and for after
sales service during the warranty and thereafter.
ii) Installation and demonstration to be arranged by the supplier.
14. Warranty / Support
i) The items supplied shall carry the warranty as per the requirement mentioned in the
technical specification.
ii) The defects, if any, during the guarantee / warranty period are to be rectified free of
charge by arranging free replacement wherever necessary.
iii) The bidder should arrange for technical support during warranty period within 24
Hours of lodging of complaint.
15. Indemnity
The vendor shall indemnify, protect and save IIITD&M Kancheepuram against all claims,
losses, costs, damages, expenses, action suits and other proceeding, resulting from
infringement of any law pertaining to patent, trademarks, copyrights etc., or such other
statutory infringements in respect of all the items supplied by them.
16. Freight and Insurance
The items to be supplied will be insured by the vendor against all risks of loss or damage
from the date of shipment till such time it is delivered at IIITD&M Kancheepuram site.
17. Payment
100% payment after delivery, installation and acceptance by IIITD&M on submission of Bank
Guarantee for an equivalent value of 5% of PO value valid till warranty period plus 2
months.
The bidders may note that other modes of payment like advance payment and payment
against delivery is not considered.
18. Penalty for delayed services / LD
i) As time is the essence of the contract, delivery period mentioned in the purchase
order should be strictly adhered to. Otherwise LD clause will be applied / enforced.
ii) If the supplier fails to supply, and fix the item as per specifications mentioned in the
order within the due date, the supplier is liable to pay liquidated damages of 1% of
order value for delay of every week or or part thereof subject to a maximum of 10%
beyond the due date. Such money will be deducted from any amount due or which
may become due to the supplier.
iii) IIITD&M Kancheepuram reserves the right to cancel the order in case the delay is
more than 04 weeks and the contractor is not eligible for any damage from the
Institute and contractor will forfeit his claim for EMD.
19. Purchasers right to vary quantities at the time of award
IIITD&M Kancheepuram reserves the right at the time of award of contract to increase or
decrease the quantity of items specified in the schedule of requirements without any
change in price or other terms and conditions.
20. Jurisdiction
The disputes, legal matters, court matters, if any, shall be subject to Courts in the district of
Kancheepuram Jurisdiction only.
21. Force Majeure
a) IIITD&M Kancheepuram may consider relaxing the penalty and delivery requirements,
as specified in this document, if and to the extent that the delay, in performance or
other failure to perform its obligations under the contract, is the result of a force
majeure.
b) If the due date of submission of tender / Tender opening is declared a holiday for the
Institute, the due date for submission of tender / Tender opening will be extended to
same time on next working day.
22. Arbitration
All disputes of any kind arising out of supply, commissioning, acceptance, warranty
maintenance etc., shall be referred by either party (IIITD&M Kancheepuram or the bidder)
after issuance of 30 days notice in writing to the other party clearly mentioning the nature
of dispute and will be referred to the arbitrator to be nominated by Director, IIITD&M
Kancheepuram, India. The Venue for arbitration shall be Chennai, India.
23. Acceptance of the terms and conditions of tender document
The bidders has to accept all the terms and conditions of this tender document and it is
made known that the bidders quoting for this tender had impliedly accepted the terms
and conditions of this tender.
24. Interpretation of the clauses in the Tender Document
In case of any ambiguity / dispute in the interpretation of any of the clause in this tender
document, interpretation of Director, IIITD&M Kancheepuram shall be final and binding on
all parties. The IIITD&M Kancheepuram reserves the right to accept the offer in full or in
parts or reject the offer summarily or partly without assigning any reasons .
Sd/-
कुलसचिव / Registrar
IIITD&M Kancheepuram
Annexure-1
(To be printed in the letter head of the bidder)
Bid Declaration form
To
The Registrar,
IIITDM Kancheepuram
I/We M/s. ________________________________ (Name) bid for the tender
_______________________________ (Tender No) towards supply and installation
of____________________ (Name of the item) declare that if we withdraw or modify our Bids
either during the period of validity of bid or fail to execute the contract on award the purchase
order/contract, we understand and agree that our firm will be debarred for the period of one
year for further bidding of any tender of your institute. Further, we agree that your institute is
at liberty to intimate this debarment to all departments/ organizations of government and
governmental organizations.
Authorized signatory with seal
Item No: 1
Handheld Camcorder- Qty-1 Sony, Panasonic Brands Only
Specification
Classification of Camera Video
Type of Camera Handheld camcorders or Video
Camera
IMAGE SENSOR
Image Sensor CMOS
Sensor Size for Fixed Lens Camera
(inch) 1/2.8 or 1/3
Effective Pixels (Mega Pixels) 8
ISO (Sensitivity of the image Sensor) Max
0
Supported Picture or image format JPEG
OPTICS
Lens Mounting Fixed
Mount type Fixed Lens
Type of Lens Prime Lens
Minimum Focal Length 28 millimetre
Maximum Focal Length 576 millimetre
Minimum Lens Aperture
(f/number) 1.6
Maximum Lens Aperture (f/number)
11
Optical Zoom 20x
Digital Zoom (X) 40x
Maximum Field of View 40 degree
Focus Mode Auto, Manual
Video Recording
Video Recoding Required
Maximum Recording Resolution
(Pixels) Full HD (1920 x 1080)
Frame Rate 24,25,30,48,50,60
Video Compression Format H.264, MPEG4
Video Output Port HDMI, SDI
Video file format AVCHD/ XAVC
AUDIO
Audio Recording Required
Audio Recording Type Buit-in
Number of Audio Input Port 2
Type of Audio input Port XLR
Audio Output Required
Number of Audio Output Port 2
Type of Audio output Port XLR, RCA / AV
DISPLAY
Display Required
Display Type LCD
Touch Screen No
Display Size (inch) 3.1 - 3.5
Vari Angle Screen Required
View Finder Required
FEATURES
Flash External (Not inclusive in the scope of supply)
GPS coordinates Stamping onto
Videos / photographs No
Gyro Sensor Required
Voice Control Required
Connectivity Interface USB
Control Remote
Picture control system Auto
Noise reduction Feature Required
Flash modes Auto
Shutter type mechanical
Minimum Shutter Speed 60 second
Maximum Shutter Speed 0.5 second
Drive modes Countinous Shooting
Additional features, if any Hood with lens cover
IP Streaming FTP, FTPS, MPEG2, RTMP, UDP:
1920 x 1080
STORAGE
Storage Type Micro SD
Dual Slot Required
Memory Card expandable upto
(GB) 256
BATTERY
Power Source Rechargeable Battery
Battery Size, if Non-Rechargeable Battery
Required
Battery Chemistry, if Rechargeable
Battery Li-Ion
Number of Batteries required for operation
1
Number of Batteries supplied (Inclusive in the Scope of Supply)
1
BATTERY CAPACITY (mAh) 5000
Item No: 2
Battery Charger for Rechargeable Batteries
Required
GENERIC
Housing construction Metallic
List of Items and Quantity of each
item included in the offer Battery, Charger, Adaptor
WARRANTY
Warranty 3 year
Audio Mixer Qty-2
Sound craft, Yamaha Brands Only
Specification Channels 12
Preamps 12 x Ghost
Equalization EQ: 4-band (2 bands of swept mids)
Input Limiter dbx: 4
Effects Lexicon: Single engine
USB Interface 2 x input
2 x output
Auxiliary 4
Subgroup Outputs 4 mono / 2 stereo
Faders 3.9" (100 mm)
Warranty 1 Year
Item No: 3
Professional Desktop Speakers Qty-1 set
Yamaha, Presonus Brand Only Specifications
Speaker Type Monitor Speaker
Amplification Method Passive Speaker
If Powered, Amplifier Class Class A
Configuration Two Way
Number of Speakers 2(Left & Right)
Frequency Response (Hz) 20-20,000 Hz
Low Frequency Unit with Size in Inches 75
High Frequency Unit with Size in inches 68
Sound Pressure Level (SPL) (1W/1m)
(dB) 59
Coverage Pattern 5
Maximum Level Sound Pressure Level
(dB) 79
Nominal Impedance (Ohm) USB
Speaker Port Polycarbonate or Better
Connectors Wall Mount
Enclosure
Mounting
LED Indicators Required
Power Rating (Watt) 50
AC Power Input 230V ~ 50/60 Hz
Warranty (Years) 1 Year
Item No: 4
Studio Monitor Speaker Qty- 1 Set
Yamaha, Presonus Brand Only
Specifications
Speaker Type Monitor Speaker
Amplification Method Passive Speaker
If Powered, Amplifier Class Class A
Configuration One Way
Number of Speakers 2(Left & Right)
Frequency Response (Hz) 20-20,000 Hz
Low Frequency Unit with Size in
Inches 85
High Frequency Unit with Size in
inches 45
Sound Pressure Level (SPL) (1W/1m)
(dB) 65
Coverage Pattern 10
Maximum Level Sound Pressure
Level (dB) 25
Nominal Impedance (Ohm) 15
Speaker Port Sealed Enclosure
Connectors USB
Enclosure Polycarbonate
Mounting Wall Mount
Power Rating (Watt) 12
AC Power Input 230V ~ 50/60 Hz
Warranty (Years) One year
Item No: 5
Video Streaming Encoder and Recorder Qty-1No
Specification
Video Input HDMI x1
SDI x1
Supported Video Input Resolution
1080p 60/59.94/50
1080p 30/29.97/25/24/23.98
1080i 60/59.94/50
720p 60/59.94/50
480i 59.94, 576i 50
Audio Input SDI & HDMI embedded audio
RCA L/R x1
Encode H.264/AVC, Main/High Profile
Video Bitrate
Record Only: Up to 16Mbps (1080p50/60)
Stream Only: Up to 10Mbps (1080p50/60)
Rec+Stream: 10Mbps (1080p25/30)
Video Rate Mode CBR/VBR
Audio Mode Stereo/Mono
Audio Bitrate Stereo: 64~384Kbps
Mono: 32~192Kbps
Streaming Protocols
TS over TCP/UDP (unicast & multicast)
RTSP over HTTP/TCP/UDP (RTSP Elementary Streaming)
RTMP/RTMPS (Publish)
HLS
Recording File Format MP4, TS
Storage SD Card x1
(File System: NTFS, FAT)
Power Supply DC 12V
Warranty One year
Samsung EVO microSD Card (SD Adapter) UHS-1 Speed Class 1 (U1), Class 10
Accessories
Content 1 x NVS-33 product
1 x AD Switch DC 12V
Item No: 6
HD digital video switcher Qty-1No
Datavideo, Blackmagic Brand only
Specification
Video Standard HD
Video Format 1080i 50/59.94/60Hz
720p 50/59.94/60Hz
Video Processing SDI: 4:2:2
HDMI: YUV 4:2:2 10 bit, RGB: 4:4:4
Input Routable /
Crosspoint All 4, repeatable
Video Input 2x HD-SDI
2x HDMI
Computer Graphic Interface
2 via HDMI
Video Output 2 x HDMI (1 is MV, 1 is Assignable)
1 x HD-SDI (Assignable)
Built- in Multi-view Monitoring Out
HDMI
Audio Input 1 x Stereo RCA (L/R)
2 x Mono Microphone
De-embedded Digital Audio (2 CH)
Audio Output 1 x Stereo RCA (L/R)
1 x Stereo headphone (Mini Jack with volume control)
Embedded Digital Audio (2 CH)
Embedded Audio Support Embedded 2-CH digital/analogue audio
A+V Switching Required
Chromakey 2
USK 1x USK support Chroma Key & Linear/ Luma Key
Picture in Picture 1
Logo Insertion 1
Still Store 500
Effects FTB, Cut, 32 Wipe with border
Transition Preview Full transitions preview
Sync / Reference In/Out Built- in Genlock (internal)
Tally Output 1x D-sub 15pin, dual color
Built- in Audio Mixer Required, 4 channels
Special Features Free Virtual Set and Stinger transition
included
Chassis Unibody
Power DC 12V, 29W
Options CB-62
accessories 1 x SE-650 product
1 x AD Switch DC 12V with AC Cord
Item No: 7
350W Tungsten 3 Qty
Specification
Lighting Color Yellow
Type Background Light
Power 350W
Lighting Type Tungsten
Color Temperature 2700-3600 K
Item No: 8
Four Bank 200W LED 8 Qty
Specification
Type Fill Light
Power 200W
Lighting Color Cool White
Cable length 2M
Door 4 Leaf barn doors
Dimmer 0-100% (adjustable)
Lighting Type LED
Color Temperature 3200-5600 K
Shape & Size of the light Rectangle
2 Feet LED
Item No: 9
Video Recorder Qty-1No Specification
SDI Video Inputs 1
SDI Video Outputs 2
SDI Rates 270Mb, 1.5G-SDI, 3G-SDI, 6G-SDI
HDMI Video Outputs 1 x HDMI type A connector.
Power over Ethernet 1 x Ethernet with Power over Ethernet
DI Audio Inputs 16 channels embedded in SD and HD in QuickTime files.
SDI Audio Outputs 16 channels embedded in SD and HD in QuickTime files.
HDMI Audio Outputs 8 channels embedded in SD, HD and UHD in QuickTime files.
Reference Input Tri-Sync or Black Burst.
Reference Generator Tri-Sync or Black Burst.
Computer Interface 1 x USB 2.0 type C for software updates and Utility software control.
Standards
SD Video Standards 525i59.94 NTSC, 625i50 PAL
SDI Compliance SMPTE 259M, 292M, 296M and 425M
HD Video Standards 720p50, 720p59.94, 720p60
1080p23.98 to 1080p100 1080i23.98 to 1080i100
1080i50, 1080i59.94,
1080i60
2160p23.98, 2160p24, 2160p25, 2160p29.97,
2160p30
SDI Compliance SMPTE 259M, 292M, 296M and 425M
SDI Metadata Support HD RP 188 and closed captioning.
Audio Sampling Television standard sample rate of 48kHz and 24-bit.
Video Sampling 4:4:4:4
Color Precision 10-bit
Color Space REC 601, REC 709
Media
Media 2 x SD for SD, HD and Ultra recording.
Media Type UHS II and able to support ProRes 4444 playback and 422 recording.
Media Format Should format discs to ExFAT (Windows/Mac) or OS X Extended (Mac) file systems.
Supported Codecs QuickTime in HD for fill and key playback, H.264 in 720p and 1080p, 4K
FTP Clients Cyberduck, Transmit, FileZilla
Control
External Control
deck control, SDI start/stop, timecode run. Includes SDK and Ethernet Control Protocol. Supports
remote FTP file upload.
Item No: 10
Full HD LCD Projector Qty-4Nos
Image Display
Display System 3-Chip Polysilicon TFT LCD
Native Chip Resolution 1920 x 1080
Supported Resolutions Minimum: VGA - 640 x 480
Maximum: SXGA - 1280 x 1024
Max Brightness White: 3600 Lumens
Color: 3600 Lumens
Aspect Ratio 04:03 , 16:09 , 16:10
Dynamic Contrast Ratio 35,000:1
Color Depth 10-Bit (1.07 Billion Colors)
Lens
Focus Manual
Lens f/2.56 – 2.68 (f = 22– 24 mm)
Optical Zoom Manual:
Throw Ratio 1.42 to 1.67:1
Projection Size 34 - 332" / 86.4 - 843.3 cm
Warranty One year
Keystone Correction Manual-Horizontal: ± 40°
Auto-Vertical: ± 40°
Digital Zoom 2x
Ceiling Mountable Yes
Rear Screen Projection Yes
Built-In Speaker Yes (Mono)
Speaker Power 5W
Input/output Connectors
Inputs/Outputs
1 x 2RCA Audio Input
1 x HDMI (HDMI Type-A) Audio, Video Input
1 x Composite (RCA) Video Input
1 x VGA (DE-15/DB-15) Video Input
1 x USB Type-A Data
1 x USB Type-B Data
1 x 1/8" / 3.5 mm Mini Audio Output
General
Operating System Android
Light Source Lamp x (UHE)
Lamp Power 200 W
Expected Lamp Life Low Brightness: 7500 Hours
Full Brightness: 4000 Hours
Security Cable Lock Slot
AC Input Power 100 to 240 VAC, 50 / 60 Hz
Power Consumption
Standby Mode (Lamp Off): 2.1 W
Full Brightness: 307 W
Low Brightness: 231 W
Item No: 11
Handheld mic Qty-2Nos
Specification
Type Wireless
Form Factor Handheld
If Wireless, Operating Range (meter) 100 m
Polar Pattern / Directionality Cardioid
Microphone Transducer Type Dynamic
Frequency Response (Hz) 20-20,000 Hz
Equivalent Noise Level (dBa) 110
Signal to Noise Ratio (dB) 110
Electrical impedance (ohm) 40
Sensitivity -50 dBV /Pa (3.15 mV)
LED Indicator Needed
On/Off switch Needed
Volume Control No
Audio Connector Type 3.5 mm Jack
Casing Material Plastic
Power Source AA battery, 1.5 V
Operating Humidity (RH%) 85
Warranty (Years) 1
Item No: 12
Podium Mic Specifications
AKG, Shure Brands Only Audio frequency bandwidth 50 - 20000 Hz
Equivalent noise level l30 dB-A
Sensitivity 5 mV/Pa
Signal to Noise 64 dB-A
Polar Pattern Cardioid
Type Balanced XLR
Gender Male
Contacts 3-pin
Body metal
Finish matte black
Gooseneck Microphone Yes
Item No: 13
Wireless Collar Mic Qty- 2Nos Specification
Type Wireless
Form Factor Collar (Lapel)
If Wireless, Operating Range (meter) 100m
Polar Pattern / Directionality Omni Directional
Microphone Transducer Type Condenser
Frequency Response (Hz) 20-20,000 Hz
Equivalent Noise Level (dBa) 36
Signal to Noise Ratio (dB) 110
Sensitivity -43 dBV/Pa (7.0 mV)
LED Indicator Needed
On/Off switch Needed
Audio Connector Type 3.5 mm Jack
Casing Material Metal
Power Source 12 V DC
Operating Temperature Range (Degree
C) -10 °C to +55 °C
Warranty (Years) 2
Item No: 14
Green Screen
Specification Size 36x10 Feet
Type Matte
Item No: 15
Ceiling Grid Rod
Specification Qty Diameter 2inch
Height 22feet 2
Height 16 feet 6
Material Mild steel with powder coated
Item No: 16
Amblifier Specifications Quantity (1)
JBL, Yamaha Brands Only Power Ampli fier
Number of Channels 2
Power Rat ing 4 Ohms / 8 Ohms:
300 W (1 kHz, 0.5% THD)
Load Impedance / Voltage 4 Ohms (Min imum)
70 / 100 V
Performance
Frequency Response 20 Hz to 20 kHz ±1 dB (8 Ohms)
Input Sensitivity Line: 775 mVrms (Balanced, at 8 Ohms)
RCA: 300 mV (at 8 Ohms)
Input Impedance Euro block: 20 Kilohms (Balanced)
RCA: 10 Kilohms
Connectivity
I/O
Euroblock Balanced/Unbalanced Input
2RCA Summed-Mono Input
Terminal Block Output
Item No: 17
Speaker 6 Qty JBL, Yamaha, Bose Brands only
Frequency Range (-10 dB) 45 Hz to 20 kHz
Frequency Response (+/-3 dB) 62Hz - 16 kHz
Maximum Input Voltage 27.5 V RMS (2 hrs), 55.0 V peak
Maximum SPL 112 dB ave. Continuous Pink Noise (118 dB peak)
Sensitivity 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle 100° x 100°
Directivity Factor (Q) 7.3 (averaged 1kHz – 16kHz)
Directivity Index (DI) 8.3dB (averaged 1kHz – 16kHz)
Nominal Impedance 8 ohms (THRU setting)
Crossover Type 2nd order low-pass, 1st order high-pass, plus conjugate shaping
Transformer Taps 70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W Insertion
Loss: <0.94 dB at any tap setting Thru Setting: 8Ω nominal
Recommended ProtectiveHigh-Pass 45 Hz high-pass (24 dB/oct) for 8Ω operation plus 15W and 7.5W
taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
Low Frequency Driver
200 mm (8 in), woven-fiberglass cone with pure butyl rubber
surround with Weather-Edge frame protection, high-temp fiberglass
voice coil former, high-temp voice coil wire, optimized cone geometry,
linear suspension spider, and FEA optimized motor s tructure.
High Frequency Driver 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic flu id,
and lightweight Kapton™ voice coil former.
Color White