tenter (drawing speed/ fly frames)
TRANSCRIPT
1
TENTER (DRAWING SPEED/ FLY FRAMES) COMPETENCY BASED CURRICULUM (Duration: 06 months.)
APPRENTICESHIP TRAINING SCHEME (ATS)
NSQF LEVEL- 3
SECTOR – APPAREL
GOVERNMENT OF INDIA MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIP
DIRECTORATE GENERAL OF TRAINING
Tenter (Drawing Speed/ Fly Frames)
TENTER (DRAWING SPEED/ FLY FRAMES)
(Revised in 2018)
APPRENTICESHIP TRAINING SCHEME (ATS)
NSQF LEVEL - 3
Developed By
Ministry of Skill Development and Entrepreneurship Directorate General of Training
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE EN-81, Sector-V, Salt Lake City,
Kolkata – 700 091
Tenter (Drawing Speed/ Fly Frames)
The DGT sincerely express appreciation for the contribution of the Industry, State
Directorate, Trade Experts and all others who contributed in revising the curriculum. Special
acknowledgement to the following industries/organizations who have contributed valuable
inputs in revising the curricula through their expert members:
Special acknowledgement by DGT to the following expert members who have
contributed immensely in this curriculum.
Co-ordinator for the course: Shri__________________________
Sl. No.
Name & Designation Sh./Mr./Ms.
Organization Expert Group Designation
1. Shri G. Jana, Adviser, (Western Region)
Regional Directorate of Apprenticeship, Training Govt. Of India, Ministry of Labour, Sion Bombay-22
Chairman
2. Shri k. K. Nagpurkar, Asstt. Director of Training
Regional Dte. Of Apprenticeship Trg. (W.R.). Govt. Of India, Min. Of Labour Sion Bombay
Chairman
3. Shri P.V. Raja, General Manager
Indore Malwa Textile Mills, N.T.C. (M.P) Indore (M.P)
Member
4. Shri N.M. Pathak, Production Manager
India United Mills No. DNTC(M.N) Dr. Ambedkar R.l. Parel Bombay-12
Member
5. Shri R. B. Joshi, Manager (Spinning)
M/s. Arvind Mills Ltd., Railwaypura post Naroda Road, P.B.No.56 Ahmedabad-25
Member
6. Shri Mohan Purandare, Spinning Master
M/S. Ashoka Mills Ltd., Naroda road, P.B. No. 1050, Ahmadabad
Member
7. Shri M.N. Dy. Director (A.T.S)
Directorate of Employment & Trg Govt. Polytechnic Compound, Ahmadabad
Member
8. Shri S. Sethana, Spinning Master
Jupiter Textile Mills. N.T.C.(M.S.) Caroll Road, Parel, Bombay
Member
9. Shri R.D. Dushpande, Training officer
National Textile Corporation (mah.) Trg. Centre India United Mills No.1, Compound, Dr. Ambedkar Rd., Parel,Bombay
Member
10. Shri M. U. Patel, Training officer
New Sherrock Mills, Mafatlal Industries Ltd P.B. No. 55, Nadiad
Member
11. Shri V. S. Kulkarni, Directorate of Tech. Training Member
ACKNOWLEDGEMENT
Tenter (Drawing Speed/ Fly Frames)
Dy. Apprenticeship adviser Elphinstone Tech High School Bldg 3, Mahapalika Marg, Dhobi Talao, Bombay
12. Shri B. R. Patnis, Bombay Millowners Assosiation, Elphinstone Tech. Bldg.10 Veer Nariman Rd. Bombay
Member
13. Shri M.S. Dave, Trg. Officer
N.T.C (Guj.) 1791 Ashram Road, Regd. Office, Ahmadabad
Member
Tenter (Drawing Speed/ Fly Frames)
Sl.
No. Topics Page No.
1. Background 1-2
2. Training System 3-7
3. Job Role 8
4. NSQF Level Compliance 9
5. General Information 10
6. Learning Outcome 11
7. Learning Outcome with Assessment Criteria 12-13
8. Syllabus 14-15
9. Syllabus - Core Skill 16-18
9.1 Core Skill – Employability Skill
10. Details of Competencies (On-Job Training) 19
11. List of Trade Tools & Equipment Basic Training - Annexure I 20
12. Format for Internal Assessment -Annexure II 21
CONTENTS
Tenter (Drawing Speed/ Fly Frames)
1
1.1 Apprenticeship Training Scheme under Apprentice Act 1961
The Apprentices Act, 1961 was enacted with the objective of regulating the
programme of training of apprentices in the industry by utilizing the facilities
available therein for imparting on-the-job training. The Act makes it obligatory for
employers in specified industries to engage apprentices in designated trades to
impart Apprenticeship Training on the job in industry to school leavers and person
having National Trade Certificate(ITI pass-outs) issued by National Council for
Vocational Training (NCVT) to develop skilled manpower for the industry. There are
four categories of apprentices namely; trade apprentice, graduate, technician and
technician (vocational) apprentices.
Qualifications and period of apprenticeship training of trade apprentices vary from
trade to trade. The apprenticeship training for trade apprentices consists of basic
training followed by practical training. At the end of the training, the apprentices are
required to appear in a trade test conducted by NCVT and those successful in the
trade tests are awarded the National Apprenticeship Certificate.
The period of apprenticeship training for graduate (engineers), technician (diploma
holders and technician (vocational) apprentices is one year. Certificates are awarded
on completion of training by the Department of Education, Ministry of Human
Resource Development.
1.2 Changes in Industrial Scenario Recently we have seen huge changes in the Indian industry. The Indian Industry
registered an impressive growth during the last decade and half. The number of
industries in India have increased manifold in the last fifteen years especially in
services and manufacturing sectors. It has been realized that India would become a
prosperous and a modern state by raising skill levels, including by engaging a larger
proportion of apprentices, will be critical to success; as will stronger collaboration
between industry and the trainees to ensure the supply of skilled workforce and
drive development through employment. Various initiatives to build up an adequate
infrastructure for rapid industrialization and improve the industrial scenario in India
have been taken.
1. BACKGROUND
Tenter (Drawing Speed/ Fly Frames)
2
1.3 Reformation
The Apprentices Act, 1961 has been amended and brought into effect from 22nd
December, 2014 to make it more responsive to industry and youth. Key
amendments are as given below:
Prescription of number of apprentices to be engaged at establishment level instead of trade-wise.
Establishment can also engage apprentices in optional trades which are not designated, with the discretion of entry level qualification and syllabus.
Scope has been extended also to non-engineering occupations.
Establishments have been permitted to outsource basic training in an institute of their choice.
The burden of compliance on industry has been reduced significantly.
Tenter (Drawing Speed/ Fly Frames)
3
2.1 GENERAL
Directorate General of Training (DGT) under Ministry of Skill Development &
Entrepreneurship offers range of vocational training courses catering to the need of different
sectors of economy/ Labour market. The vocational training programmes are delivered under
aegis of National Council of Vocational Training (NCVT). Craftsman Training Scheme (CTS) and
Apprenticeship Training Scheme (ATS) are two pioneer programmes of NCVT for propagating
vocational training.
Tenter (Drawing Speed/ Fly Frames) trade under ATS is one of the most popular
courses delivered nationwide through different industries. The course is of Six month duration
(01 Block including basic training). It mainly consists of Domain area and Core area. In the
Domain area Trade Theory & Practical impart professional - skills and knowledge, while Core
area - and Employability Skills imparts requisite core skills & knowledge and life skills. After
passing out the training programme, the trainee is being awarded National Apprenticeship
Certificate (NAC) by NCVT having worldwide recognition.
Broadly candidates need to demonstrate that they are able to:
Identify necessary materials and tools;
Perform task with due consideration to safety rules.
Apply professional skill, knowledge, core skills & employability skills while performing jobs.
2. TRAINING SYSTEM
Tenter (Drawing Speed/ Fly Frames)
4
2.2 CAREER PROGRESSION PATHWAYS:
Indicative pathways for vertical mobility.
2.3 COURSE STRUCTURE:
Table below depicts the distribution of training hours across various course elements
during a period of Six Months (Basic Training and On-Job Training):-
Total training duration details: -
Time (in months)
1 2-6
Basic Training Block– I -----
Practical Training (On - job training)
---- Block – I
Tenter (Drawing Speed/ Fly Frames)
5
A. Basic Training
For 02 yrs. Course (Non-Engg.):- Total 03 months: 03 months in 1styr.only
For 01 yr. Course (Non-Engg):- Total 03 months: 03 months in 1st yr.
For 06 months Course (Non – Engg.): - Total 01 month: 01 month in 06 Months
Sl. No. Course Element Total Notional Training Hours
(For 06 months course)
1 Professional Skill (Trade Practical) 100
2 Professional Knowledge (Trade Theory) 45
3 Employability Skills 55
Total (including Internal Assessment) 200
B. On-Job Training:-
For 06Months Course (Non-Engg.) :-( Total 05 months)
Notional Training Hours for On-Job Training: 840 Hrs.
C. Total training hours:-
Duration Basic Training On-Job Training Total
For 02 yrs. Course (Non-Engg.) 500 hrs. 3640 hrs. 4140 hrs.
For 01 yr. Course (Non-Engg.) 500 hrs. 2080 hrs. 2580 hrs.
For 06 months Course (Non-Engg.) 200 hrs. 840 hrs. 1040 hrs.
2.4 ASSESSMENT & CERTIFICATION:
The trainee will be tested for his skill, knowledge and attitude during the period of course
and at the end of the training programme as notified by Govt of India from time to time. The
Employability skills will be tested in first two semesters only.
a) The Internal assessment during the period of training will be done by Formative assessment
method by testing for assessment criteria listed against learning outcomes. The training
Tenter (Drawing Speed/ Fly Frames)
6
institute have to maintain individual trainee portfolio as detailed in assessment guideline. The
marks of internal assessment will be as per the template (Annexure – II).
b) The final assessment will be in the form of summative assessment method. The All India Trade Test for awarding NAC will be conducted by NCVT on completion of course as per guideline of Govt of India. The pattern and marking structure is being notified by govt of India from time to time. The learning outcome and assessment criteria will be basis for setting question papers for final assessment. The examiner during final examination will also check individual trainee’s profile as detailed in assessment guideline before giving marks for practical examination.
2.4.1 PASS REGULATION
The minimum pass percent for Practical is 60% & minimum pass percent for Theory subjects 40%. The candidate pass in each subject conducted under all India trade test.
2.4.2 ASSESSMENT GUIDELINE
Appropriate arrangements should be made to ensure that there will be no artificial barriers to assessment. The nature of special needs should be taken into account while undertaking assessment. Due consideration should be given while assessing for team work, avoidance/reduction of scrap/wastage and disposal of scarp/wastage as per procedure, behavioral attitude, sensitivity to environment and regularity in training. The sensitivity towards OSHE and self-learning attitude are to be considered while assessing competency. Assessment will be evidence based comprising the following:
Job carried out in labs/workshop
Record book/ daily diary
Answer sheet of assessment
Viva-voce
Progress chart
Attendance and punctuality
Assignment
Project work
Evidences of internal assessments are to be preserved until forthcoming semester examination for audit and verification by examination body. The following marking pattern to be adopted while assessing:
Performance Level Evidence
(a) Weightage in the range of 60 -75% to be allotted during assessment
Tenter (Drawing Speed/ Fly Frames)
7
For performance in this grade, the candidate with occasional guidance and showing due regard for safety procedures and practices, has produced work which demonstrates attainment of an acceptable standard of craftsmanship.
Demonstration of good skill in the use of hand tools, machine tools and workshop equipment
Below 70% tolerance dimension/accuracy achieved while undertaking different work with those demanded by the component/job/set standards.
A fairly good level of neatness and consistency in the finish
Occasional support in completing the project/job.
(b)Weightage in the range of above75% - 90% to be allotted during assessment
For this grade, the candidate, with little guidance and showing due regard for safety procedures and practices, has produced work which demonstrates attainment of a reasonable standard of craftsmanship.
Good skill levels in the use of hand tools, machine tools and workshop equipment
70-80% tolerance dimension/accuracy achieved while undertaking different work with those demanded by the component/job/set standards.
A good level of neatness and consistency in the finish
Little support in completing the project/job
(c) Weightage in the range of above 90% to be allotted during assessment
For performance in this grade, the candidate, with minimal or no support in organization and execution and with due regard for safety procedures and practices, has produced work which demonstrates attainment of a high standard of craftsmanship.
High skill levels in the use of hand tools, machine tools and workshop equipment
Above 80% tolerance dimension/accuracy achieved while undertaking different work with those demanded by the component/job/set standards.
A high level of neatness and consistency in the finish.
Minimal or no support in completing the project.
Tenter (Drawing Speed/ Fly Frames)
8
Brief description of Job roles:
Drawing Tenter; Draw Frame Tenter; Drawing Feeder; Drawing Receivers (Textile) tends
draw frame (machine) having number of drawing sets, each set combining several slivers into
one of nearly same weight and thickness as any of original sliver. Arranges number of cans full
of card or comber sliver at rear of drawing machine. Threads end of sliver from cans through
machine. Replaces empty cans with filled cans, joining ends of slivers by matting and rolling
them together with fingers. Watches slivers running into machine and joins broken ends.
Replaces cans when filled at delivery end with empty ones. Cleans machine and may oil and
varnish top rollers.
Reference NCO: 8151.0700- Drawing Tenter
3. JOB ROLE
Tenter (Drawing Speed/ Fly Frames)
9
NSQF level for Tenter (Drawing Speed/ Fly Frames) trade under ATS: Level 3
As per notification issued by Govt. of India dated- 27.12.2013 on National Skill Qualification Framework total 10 (Ten) Levels are defined. Each level of the NSQF is associated with a set of descriptors made up of five outcome statements, which describe in general terms, the minimum knowledge, skills and attributes that a learner needs to acquire in order to be certified for that level. Each level of the NSQF is described by a statement of learning outcomes in five domains, known as level descriptors. These five domains are:
a. Process b. Professional knowledge, c. Professional skill, d. Core skill and e. Responsibility.
The Broad Learning outcome of Tenter (Drawing Speed/ Fly Frames) trade under ATS
mostly matches with the Level descriptor at Level- 3.
The NSQF level-3 descriptor is given below:
Level Process
Required Professional Knowledge
Professional Skill
Core Skill Responsibility
Level 3 Person may carry put a job which may require limited range of activities routine and predictable
Basic facts, process and principle applied in trade of employment
Recall and demonstrate practical skill, routine and repetitive in narrow range of application
Communication written and oral, with minimum required clarity, skill of basic arithmetic and algebraic principles, person al banking, basic understanding of social and natural environment
Under close supervision Some Responsibility for own work within defined limit.
4. NSQF LEVEL COMPLIANCE
Tenter (Drawing Speed/ Fly Frames)
10
Name of the Trade Tenter (Drawing Speed/ Fly Frames)
NCO - 2015 8151.0700
NSQF Level Level – 3
Duration of Apprenticeship Training (Basic Training + On-Job Training)
1 month+ Five Months (01 Block of 06 months duration including basic training).
Duration of Basic Training a) Block –I : 1 month Total duration of Basic Training: 1 month
Duration of On-Job Training a) Block–I: 5 months Total duration of Practical Training: 5 months
Entry Qualification Passed in 8th Class examination under the 10+2 system of Education or its equivalent.
Selection of Apprenticeship The apprentices will be selected as per Apprenticeship Act amended time to time.
Instructors Qualification for Basic Training
As per ITI instructors qualifications as amended time to time for the specific trade.
Infrastructure for basic training
As per related trade of ITI.
Examination The internal examination/ assessment will be held on completion of each block. Final examination for all subjects will be held at the end of
course and same will be conducted by NCVT.
Rebate to Ex-ITI Trainees -----
CTS trades eligible for Tenter (Drawing Speed/ Fly Frames) (Apprenticeship)
-----
Note:
Industry may impart training as per above time schedule for different block, however this
is not fixed. The industry may adjust the duration of training considering the fact that all
the components under the syllabus must be covered. However the flexibility should be
given keeping in view that no safety aspects is compromised.
For imparting Basic Training the industry to tie-up with ITIs having such specific trade and
affiliated to NCVT.
5. GENERAL INFORMATION
Tenter (Drawing Speed/ Fly Frames)
11
6.1 GENERIC LEARNING OUTCOME
The following are minimum broad Common Occupational Skills/ Generic Learning Outcome after completion of the Cutting and Sewing Machine Operator course of 06 Months duration under ATS.
Block I:-
1. Recognize & comply safe working practices.
2. Explain the concept in productivity, quality tools, and labour welfare legislation and
apply such in day to day work to improve productivity & quality.
3. Explain entrepreneurship related task in day to day work for personal & societal growth.
6.2 SPECIFIC LEARNING OUTCOME
Block – I
1. Control different deliveries of the various machines. [Various Machines viz., Ordinary
draw frames 18 deliveries (2 heads), High speed draw frames- 4 deliveries (2 heads),
Slubbing, Inter Frame, Roving Frame, Canfed Inter/ Rovings.]
2. Work on any Machine for Piecing ensuring quality.
3. Operate machines and acquire 70% efficiency of a normal Tenter.
Note: Learning outcomes are reflection of total competencies of a trainee and assessment will
be carried out as per assessment criteria.
6. LEARNING OUTCOME
Tenter (Drawing Speed/ Fly Frames)
12
GENERIC LEARNING OUTCOME
LEARNING OUTCOMES ASSESSMENT CRITERIA
1. Recognize & comply safe working practices, environment regulation and housekeeping.
1. 1. Follow and maintain procedures to achieve a safe working environment in line with occupational health and safety regulations and requirements.
1. 2. Recognize and report all unsafe situations according to site policy.
1. 3. Identify and take necessary precautions on fire and safety hazards and report according to site policy and procedures.
1. 4. Identify, handle and store / dispose off dangerous/unsalvageable goods and substances according to site policy and procedures following safety regulations and requirements.
1. 5. Identify and observe site policies and procedures in regard to illness or accident.
1. 6. Identify safety alarms accurately.
1. 7. Report supervisor/ Competent of authority in the event of accident or sickness of any staff and record accident details correctly according to site accident/injury procedures.
1. 8. Identify and observe site evacuation procedures according to site policy.
1. 9. Identify Personal Productive Equipment (PPE) and use the same as per related working environment.
1. 10. Identify basic first aid and use them under different circumstances.
1. 11. Identify different fire extinguisher and use the same as per requirement.
1. 12. Identify environmental pollution & contribute to avoidance of same.
1. 13. Take opportunities to use energy and materials in an environmentally friendly manner
1. 14. Avoid waste and dispose waste as per procedure
1. 15. Recognize different components of 5S and apply the same in the working environment.
2. Explain the concept in productivity, quality tools, and labour welfare legislation and apply such in day to day
2.1 Explain the concept of productivity and quality tools and apply during execution of job.
2.2 Understand the basic concept of labour welfare legislation and adhere to responsibilities and remain
7. LEARNING OUTCOME WITH ASSESSMENT CRITERIA
Tenter (Drawing Speed/ Fly Frames)
13
work to improve productivity & quality.
sensitive towards such laws.
2.3 Knows benefits guaranteed under various acts
3. Explain personnel finance, entrepreneurship related task in day to day work for personal & societal growth.
3. 1. Explain entrepreneurship.
3. 2. Explain role of Various Schemes and Institutes for self-employment i.e. DIC, SIDA, SISI, NSIC, SIDO, Idea for financing/ non financing support agencies to familiarizes with the Policies /Programmes & procedure & the available scheme.
3. 3. Prepare Project report to become an entrepreneur for submission to financial institutions.
SPECIFIC OUTCOME
Block-I
Assessment Criteria i.e. the standard of performance, for each specific learning outcome mentioned under block – I (section: 10) must ensure that the trainee achieves well developed skill with clear choice of procedure in familiar context. Assessment criteria should broadly cover the aspect of Planning (Identify, ascertain, etc.); Execution (perform, illustration, etc. by applying basic methods, tools, materials and information 2) Knowledge of basic facts, process and principle applied in trade of employment 3) Basic Mathematical Skills and Checking/ Testing to ensure functionality during the assessment of each outcome. The assessments parameters must also ascertain that the candidate is responsible for own work within defined limit.
Tenter (Drawing Speed/ Fly Frames)
14
BASIC TRAINING (Block – I)
Duration: (01) One Month
Week No.
Professional Skills (Trade Practical)
Professional Knowledge (Trade Theory)
1. Safety precautions as applicable to the trade. Arranging full cans behind delivery spindles. Starting and stopping of the machines. Passing of the silver (to feed the silver) through drafting zone.
Safety precautions and first aid to the injured (as specified by St. John Ambulance.) Elementary knowledge or textile raw materials used in the production of yarns made from vegetables, animals and manmade fibres. A brief description on the general working of the various departments of the mill and the purpose and function of the various preparatory machines of the Spinning Department from blow room to Ring frame, Reeling. Principles of Twisting: idea about T.P.I, i.e. turns per inch.
2. Piecing of silver at the bank. Piecing of silver/roving at the front. Cleaning of drafting zone. Cleaning of top and bottom clearers. Cleaning of creel in speed frame. Creeling- slubbbing on inter frame. To collect different types of waste and disposing their in the prescribed manner.
Function of Drawing Frame: Elementary idea of different mechanisms of different mechanisms of the machines including stop motion. Functions of speed frames. Brief idea about the different change wheels and its functions with effect of change in number of teeth. The idea about the high draft inter machines and its comparisons with conventional speed frames. Various defects of the roving packages such as hard and soft bobbins, its causes and remedies. Various methods of threading the rove through fliers and presses and its effect on packages. Knowledge of count or hank of the silvers of raving.
8. SYLLABUS
Tenter (Drawing Speed/ Fly Frames)
15
3. Drafting full roving. Piecing of hear bobbins on speed frames. Oiling of machines. Testing of stop motion at draw frame.
Brief knowledge on effects of bad or eccentric top or bottom rollers on silver/ roving. Correct positioning of dead weights or rollers or settles etc. Of drafting system.
4. Bufing varnishing the top rollers. Effect of bad work practices on quality of fabrics.
Internal Assessment 03days
Note: - More emphasis to be given on video/real-life pictures during theoretical classes. Some
real-life pictures/videos of related industry operations may be shown to the trainees to give a
feel of Industry and their future assignment.
Tenter (Drawing Speed/ Fly Frames)
16
9.1 EMPLOYABILITY SKILLS
(DURATION: - 55 HRS.)
Topic No.
Topic Duration (in hours)
English Literacy 7
1. Reading Reading and understanding simple sentences about self, work and environment
2. Writing Construction of simple sentences Writing simple English
3. Speaking / Spoken English Speaking with preparation on self, on family, on friends/ classmates, on know, picture reading gain confidence through role-playing and discussions on current happening job description, asking about someone's job habitual actions. Taking messages, passing messages on and filling in message forms Greeting and introductions office hospitality, Resumes or curriculum vita essential parts, letters of application reference to previous communication.
I.T. Literacy 10
1. Basics of Computer Introduction, Computer and its applications, Hardware and peripherals, Switching on-Starting and shutting down of computer.
2. Word processing and Worksheet Basic operating of Word Processing, Creating, opening and closing Documents, use of shortcuts, Creating and Editing of Text, Formatting the Text, Insertion & creation of Tables. Printing document. Basics of Excel worksheet, understanding basic commands, creating simple worksheets, understanding sample worksheets, use of simple formulas and functions, Printing of simple excel sheets. Use of External memory like pen drive, CD, DVD etc,
3. Computer Networking and INTERNET Accessing the Internet using Web Browser, Downloading and Printing Web Pages, Opening an email account and use of email. Social media sites and its implication.
Communication Skill 18
1. Introduction to Communication Skills Communication and its importance Principles of Effective communication Types of communication - verbal, nonverbal, written, email, talking on phone. Nonverbal communication - components-Para-language
9. SYLLABUS - CORE SKILLS
Tenter (Drawing Speed/ Fly Frames)
17
Body - language Barriers to communication and dealing with barriers.
2. Listening Skills Listening-hearing and listening, effective listening, barriers to effective listening guidelines for effective listening.
3. Motivational Training Characteristics Essential to Achieving Success The Power of Positive Attitude Self awareness Importance of Commitment Ethics and Values Ways to Motivate Oneself Personal Goal setting and Employability Planning.
4. Facing Interviews Manners, Etiquettes, Dress code for an interview Do's & Don'ts for an interview
Entrepreneurship skill 8
1. Concept of Entrepreneurship Entrepreneurship- Entrepreneurship - Enterprises:-Conceptual issue. Source of business ideas, Entrepreneurial opportunities, The process of setting up a business.
2. Institutions Support Role of Various Schemes and Institutes for self-employment i.e. DIC, SIDA, SISI, NSIC, SIDO, Idea for financing/ non financing support agencies to familiarizes with the Policies /Programmes& procedure & the available scheme.
Productivity
1. Productivity Definition, Necessity.
2. Affecting Factors Skills, Working Aids, Automation, Environment, Motivation How improves or slows down.
3. Personal Finance Management Banking processes, Handling ATM, KYC registration, safe cash handling, Personal risk and Insurance.
Occupational Safety, Health & Environment Education 6
1. Safety & Health Introduction to Occupational Safety and Health importance of safety and health at workplace.
2. Occupational Hazards Basic Hazards, Chemical Hazards, Vibro-acoustic Hazards, Mechanical Hazards, Electrical Hazards, Thermal Hazards. Occupational health, Occupational hygienic, Occupational Diseases/ Disorders & its prevention.
Tenter (Drawing Speed/ Fly Frames)
18
3. Accident & safety Basic principles for protective equipment. Accident Prevention techniques - control of accidents andsafety measures.
4. First Aid Care of injured & Sick at the workplaces, First-Aid & Transportation of sick person
Labour Welfare Legislation
1. Welfare Acts Benefits guaranteed under various acts- Factories Act, Apprenticeship Act, Employees State Insurance Act (ESI), Employees Provident Fund Act.
Quality Tools 6
1. Quality Consciousness : Meaning of quality, Quality Characteristic
2. Quality Circles : Definition, Advantage of small group activity, objectives of quality Circle, Roles and function of Quality Circles in Organization, Operation of Quality circle. Approaches to starting Quality Circles, Steps for continuation Quality Circles.
3. House Keeping : Purpose of Housekeeping, Practice of good Housekeeping.
4. Quality Tools Basic quality tools with a few examples
Tenter (Drawing Speed/ Fly Frames)
19
The competencies/ specific outcomes on completion of On-Job Training are detailed
below: -
Block – I
1. Control different deliveries of the various machines. [Various Machines viz., Ordinary
draw frames 18 deliveries (2 heads), High speed draw frames- 4 deliveries (2 heads),
Slubbing, Inter Frame, Roving Frame, Canfed Inter/ Rovings.]
2. Work on any Machine for Piecing ensuring quality.
3. Operate machines and acquire 70% efficiency of a normal Tenter.
Note:
1. Industry must ensure that above mentioned competencies are achieved by the trainees
during their on job training.
2. In addition to above competencies/ outcomes industry may impart additional training
relevant to the specific industry.
10. DETAILS OF COMPETENCIES (ON-JOBTRAINING)
Tenter (Drawing Speed/ Fly Frames)
20
INFRASTRUCTURE FOR PROFESSIONAL SKILL & PROFESSIONAL KNOWLEDGE
TENTER (DRAWING SPEED/ FLY FRAMES)
LIST OF TOOLS AND EQUIPMENT for Basic Training
A. TRAINEES TOOL KIT
Sl. No. Name of the items Quantity
(indicative)
1. High speed drawing Machines 1 no.
2. Can fed Inter/ Roving Machines 1 no.
TOOLS &EQUIPMENTS FOR EMPLOYABILITY SKILLS
Sl. No. Name of the items Quantity
1. Computer (PC) with latest configurations and Internet connection with standard operating system and standard word processor and worksheet software
10 Nos.
2. UPS - 500VA 10 Nos.
3. Scanner cum Printer 1 No.
4. Computer Tables 10 Nos.
5. Computer Chairs 20 Nos.
6. LCD Projector 1 No.
7. White Board 1200mm x 900mm 1 No.
Note: - Above Tools &Equipments not required, if Computer LAB is available in the institute.
ANNEXURE – I
Tenter (Drawing Speed/ Fly Frames)
21
Name & Address of the Assessor : Year of Enrollment :
Name & Address of ITI (Govt./Pvt.) : Date of Assessment :
Name & Address of the Industry : Assessment location: Industry / ITI
Trade Name : Semester: Duration of the Trade/course:
Learning Outcome:
Sl. N
o
Maximum Marks (Total 100 Marks) 15 5 10 5 10 10 5 10 15 15
Tota
l in
tern
al a
sse
ssm
ent
Mar
ks
Res
ult
(Y
/N)
Candidate Name Father's/Mother’s
Name Sa
fety
co
nsc
iou
snes
s
Wo
rkp
lace
hyg
ien
e
Att
end
ance
/ P
un
ctu
alit
y
Ab
ility
to
fo
llow
Man
ual
s/
Wri
tten
inst
ruct
ion
s
Ap
plic
atio
n o
f K
no
wle
dge
Skill
s to
han
dle
to
ols
&
equ
ipm
ent
Eco
no
mic
al u
se o
f m
ater
ials
Spee
d in
do
ing
wo
rk
Qu
alit
y in
wo
rkm
ansh
ip
VIV
A
1
2
FORMAT FOR INTERNAL ASSESSMENT
ANNEXURE-II