terminal blocks - datasheet.octopart.com · for use with square d class 8501 type x, k, ... for...

Table of Contents

Section 22Terminal Blocks

22T

ER

MIN

AL B

LO

CK

S

Class 9080 Type GR6 Class 9080 Type K

AB1VV AB1RR

GB2 Class 9080 Type GCB

Class 9080 Type LB

Class 9080 Type FB Class 9080 Type GF6

DZ5

9/8/03

9/8/03

Track Mounted Terminal Blocks

TELEFAST® 2 22-2

NEMA Type Class 9080 Type G 22-3

Class 9080 Type K 22-20

IEC Type AB1 22-7

Direct Mount Terminal Blocks

NEMA Type Class 9080 Type GK 22-3

Circuit Protectors

Class 9080 Type GCB 22-17

GB2 22-17

Power Distribution Blocks (Splitter Blocks)

Class 9080 Type LB 22-18

Fuseholders

Panel Mount Class 9080 Type FB 22-19

Class 9080 Type PF 22-20

NEMA Type Class 9080 Type GF6 22-4

Class 9080 Type KH1 22-20

IEC Type AB1FU 22-11

AB1RRSF 22-7

DF6, GK1 22-11

Cable Ends (Ferrules, Wire Markers)

DZ5 22-21

22-1

www.SquareD.comFor the most up-to-date information

TELEFAST® 2 System

22-2

22T

ER

MIN

AL B

LO

CK

S

TELEFAST 2 Product Features

I/O State and Blown Fuse LEDs

Custom Labeling of Channels (cover face)and Wiring Diagram (under cover)

Blade Isolation Switches per Channel

Test Point for 2.3 mm PlugFuse Protection for Cable and PS

Power Supply LED

Detachable Terminal Blocks

(Screw Terminations)

Note: Not all features available on all modules.

35 mm DIN-rail Mounting

Fusing per Channel

Blade Isolation Switch on 0 V of Power Supply

The TELEFAST 2 system is a set of products for the rapid connection of I/O modules (24 Vdc discrete, analog and counters) to various control circuit components. These components act as a substitute for screw terminal blocks, remotely locating and partly eliminating the single wire connections. The system only connects to channels with HE10 and SUB-D connectors, or to standard terminal blocks with a cabled connector.

Variations within the listing of modules include those with and without relays (electromechanical and solid state), analog and counter modules and special function modules.

Pre-wired cables available allow you to connect directly to:

• Schneider Electric (MODICON®)

— TSX PREMIUM™

— TSX Micro

— TSX Series 7

— QUANTUM™

— Compact

— April S5000/7000

— NUM1020/1060

• Siemens

— S7 – 200/300/400

— S5 – 95U to 155U

• Allen-Bradley

— SLC500

In addition, other accessories include:

• I/O simulators

• Continuity blocks

• Label marking software

• Splitter bases (16, 23 and 32 channels)

• Mounting kits

• Detachable terminal strips

• Wiring pass-through connectors

• Fuses

For the complete listing of components in the TELEFAST 2 pre-wired system, refer to Catalog #8501CT9801R2/02.

9/8/03

© 2003 Schneider Electric All Rights Reserved

9/8/03

NEMA Type Terminal BlocksClass 9080—Type Gwww.SquareD.com

For the most up-to-date information

22T

ER

MIN

AL B

LO

CK

S

a Orders must specify standard package quantity or multiples of that quantity.b These maximum current values assume the use of insulated copper conductors with 75°C temperature rating, and are calculated based on NEC Article 310, Table 310-16. In most cases this value

is the maximum ampacity of that wire or combination of wires (as listed in the above table) which has the greatest current carrying capacity. The actual allowable current for a particular application is dependent upon the number, size, insulation class and other characteristics of the wires used. The lower of the UL and CSA ratings are shown.

c One end barrier required for each assembly of like blocks.d Terminals are tin plated, making them suitable for use with either copper or aluminum wire.

Description MaximumVoltage

MaximumCurrentb

Blocks End Barriers cBlocks per Ft.

Max. Wire Combinations

Color Type PriceEach

Std.Pack a Type Price

EachStd.

Pack aCopper Wire

(stranded or solid)

Solderless Box Lugfor #22 to #8 AWG wire.

Will mount on standard 9080GH track or 35 mm DIN 3 track.Fingersafe per DIN 57470

600 V 60 A

Natural GR6

$ 1.60 50

GM6B

$ .52 10

34

1 #8 1–4 #16 1 #10 1–5 #18 1–3 #12 1–8 #20 1–4 #14 1–10 #22

Black GRB6 GMB6B

Blue GRL6 GML6B

Green GRG6 GMG6B

Grey GRE6 GME6B

Orange GRS6 GMS6B

Red GRR6 GMR6B

Yellow GRY6 GMY6B

Brown GRN6 GMN6B

Similar to a 9080GR6 except with a 9080GH91 banana test plug

adapter installed.Fingersafe per DIN 57470 600 V 60 A Natural GR6T 1.90 50 GM6B .52 10


Can be mounted directly to a panel or can be

mounted on 9080GH track.600 V 40 A

Natural GK6

1.60 50 GK6B .62 50 34

1–4 #16 1 #10 1–5 #18 1–2 #12 1–8 #20 1–2 #14 1–10 #22

Black GKB6

Blue GKL6

Green GKG6

Grey GKE6

Orange GKS6

Red GKR6

Yellow GKY6

High DensitySolderless Box Lug

for #22 to #10 AWG wire.

Will mount on standard 9080GH track or

35 mm DIN 3 track.Fingersafe per DIN 57470

600 V 30 A

Natural GM6

1.20 50

GM6B

.52 10 51

1 #10 1–2 #18 1 #12 1–5 #20 1 #14 1–8 #22 1–2 #16

Black GMB6 GMB6B

Blue GML6 GML6B

Green GMG6 GMG6B

Grey GME6 GME6B

Orange GMS6 GMS6B

Red GMR6 GMR6B

Yellow GMY6 GMY6B

Brown GMN6 GMN6B


Will mount on standard 9080GH track or 35 mm DIN 3 track. 600 V 85 A Natural GC6 3.30 50 GC6B .85 10 28

1 #4 1–5 #12 1 #6 1–6 #14 1–2 #8 1–6 #16 1–4 #10 1–8 #18

Solderless Box Lugfor #12 to #1/0 AWG wire.

Will mount on standard 9080GH track or 35 mm DIN 3 track. 600 V 170 A Natural GD6 6.70 10 GD6B 1.10 10 17

1 1/0 1–3 #6 1 #1 1–5 #8 1 #2 1–6 #10 1–2 #4 1–7 #12

Solderless Box Lugfor #6 AWG to 250 kcmil wire. d

Will mount on standard 9080GH track or 35 mm DIN 3 track. 600 V 255 A Natural GE6 18.00 10 None Required 10

1 250 kcmil d 1 4/0 1 #1 1 3/0 1 #2 1 2/0 1 #4 1 1/0 1 #6

File CCN

E60616 XCFR2

File Class

LR62144 6228 01

For Standard or Custom Assemblies. . . . . . . . . . . . . . . . . . . . . . . . page 22-5For Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-6For DIN 3 track and end clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-16

All R9/8/0

or additional information, reference Catalog #9080CT9601.

© 2003 Schneider Electric

F

-3
22ights Reserved3
9/8/03

CP5 DiscountSchedule


NEMA Type Terminal BlockType G —Class 9080

TE

RM

INA

L B

LO

CK

S
22
a Orders must specify standard package quantity or multiples of that quantity.b These maximum current values assume the use of insulated copper conductors with 75°C temperature rating, and are calculated based on NEC Article 310, Table 310-16. In most cases this value

is the maximum ampacity of that wire or combination of wires (as listed in the above table) which has the greatest current carrying capacity. The actual allowable current for a particular application is dependent upon the number, size, insulation class and other characteristics of the wires used. The lower of the UL and CSA ratings are shown below.

c One end barrier required for each assembly of like sections.d Not intended to make or break a live circuit. Power must be disconnected from the circuit before operation of the switch.e Fuse puller is supplied as standard with Class 9080 Type GF6 fuse block. The 9080GH63 is a replacement fuse puller.f Modules have RC circuitry for suppressing transient voltage, generated when opening a coil circuit, to approximately 200% of the peak line voltage, when used with 120 volt coils. Type GT6 is suitable

for use with Square D Class 8501 Type X, K, R and C relays or Square D Type S starters and contactors, Sizes 00-2.

Description Maximum Voltage

Maximum Current b

Blocks End BarrierscBlocksPer Ft.

Max. Wire Combinations

Type PriceEach

Std. Pack a Type Price

EachStd.

Pack aCopper Wire

(stranded or solid)

Self-Lifting Pressure Wire Connector for #18 to #12 AWG wire. Will mount

on standard 9080GH track or 35 mm DIN 3 track. 600 V 40 A GP6 $ 1.70 50 GP6B $ .68 10 32

1 or 2 #12 1 or 2 #14 1 or 2 #16 1 or 2 #18

Flat Terminal Connector for #22 to #12 AWG wire. Screws are #6-32 x 5⁄16 inch for ring or spade

lugs, 5⁄16 inch wide maximum.Will mount on standard 9080GH

track or 35 mm DIN 3 track.Fingersafe per DIN 57470

600 V 40 A GA6 1.20 50 GP6B .68 10 321 or 2 Conductors Per Screw #12–22

Circuit Isolating Switchdwith self-lifting pressure

connectorsfor #18 to #10 AWG wire.

Will mount on standard 9080GH track or 35 mm DIN 3 track.

600 V 30 A GG6 8.10 10 GF6B 1.00 10 16

1 #10 1 #12 1 #14 1–4 #16 1–4 #18

Slip-on Connectors for #22 to #12 AWG wire. Tabs accept

0.250 x 0.032" slip-on connectorsWill mount on standard 9080GH

track or 35 mm DIN 3 track. 600 V 20 A GS6 1.70 10 GF6B 1.00 10 16

1–2 #12 1–2 #14 1–2 #16 1–2 #18 1–2 #20 1–2 #22

Transient Voltage Suppressors fwith box lug connectors

for #18 to #10 AWG wire.

Will mount on standard 9080GH track or 35 mm DIN 3 track.

120 V ... GT6 13.80 5 GT6B 1.10 10 24

1 #10 1 #12 1 #14 1–2 #16 1–4 #18

Fuse Block for 13⁄32" Dia. x 11⁄2"ferrule fuse with self-liftingpressure connectors. Fuse

puller is included as standard.Fuses are not included.

Will mount on standard 9080GH track or 35 mm DIN 3 track.Fingersafe per DIN 57470

600 V 30 A GF6 7.80 10 GF6B 1.00 10 16

1 #10 1 #12 1 #14 1–4 #16 1–4 #18

Fuse Pullere ... ... GH63 1.60 10 N/A N/A N/A

Blown Fuse Indicator/Pullers are neon pilot

lights which plug on to thefuse in a standard Type

GF6 fuse block.

120–240 V ... GLP3 7.90 10 N/A

N/A N/A

277–600 V ... GLP6 7.90 10 N/A

With Built-inTransientSuppression

WithoutTransientSuppression

0

00

00

0

0

VO

LTS

3

6

90

120Terminal BlocksFile CCN

E60616 XCFR2

File Class

LR62144 6228 01

Blown Fuse IndicatorFile CCN

E63698 ZTFR

File Class

LR25490 184-N-90

22

For Standard or Custom Assemblies . . . . . . . . . . . . . . . . . . . . . . . page 22-5For Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-6For DIN 3 track and end clamps . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-16

er:

er Specify Catalog Number

Numberumber

Class Type9080 GP6

or additional information, reference Catalog #9080CT9601.

How to Ord

To Ord

• Class • Type N

F


TIME

ved/03
-4
All Rights Reser9/8

9/8/03


NEMA Type Terminal BlocksClass 9080—Type Gwww.SquareD.com


22T

ER

MIN

AL B

LO

CK

S

Standard Terminal Block AssembliesThe assemblies listed in the table below consist of 6 feet (two 3 foot lengths packaged together) of terminal blocks. The terminal blocks are mounted on snap-off mounting track, which can be easily broken every 5/16th of an inch. Every tenth terminal block is marked to aid in counting off the proper number of terminal blocks. After adding the proper end barrier and a slip-in end clamp to the blocks that were broken off, the custom assembly is ready for installation.

Description Type Price

Assembly of 188 Type GA6 GA6188BC $353.

Assembly of 204 Type GR6 GR6204BC 449.

Assembly of 166 Type GC6 GC6166BC 692.

Assembly of 94 Type GF6 GF694BC 874.

Assembly of 296 Type GM6 GM6296BC 553.

Assembly of 188 Type GP6 GP6188BC 435.

All R9/8/

Custom Terminal Block AssembliesOrder an assembly built as required for the application. As standard, custom assemblies use 9080GH mounting track with screw on end clamps. Other options are available from the table below.

One terminal block type: The number of blocks in the assembly is added to the end of the catalog number of the desired block. Example: an assembly of 25 9080GR6 blocks would be 9080GR625.

a The 9080GH10 screw-on end clamp is not recommended for use with snap off channel. It is recommended that the 9080GH11 slip-in end clamp be used. Therefore, when the suffix B is used, it should be followed by the suffix C.

Option Suffix Example

Substitute slip-in end clamps C 9080GR625C

Substitute snap-off channel B 9080GR625BC a

For direct mount assembly of 9080GK6 blocks D 9080GK67D

Add a blank vinyl marking strip M 9080GR625M

Add pre-marked (1–25 only) marking strip MPO 9080GR625MPO

Mount on 35 mm DIN 3 track instead of 9080GH track T 9080GR625T

More than one terminal block type in an assembly: A detailed drawing or sketch of the desired assembly must accompany the order.

Custom Assembly Pricing

Custom Assemblies

Block TypePrice Per

Block/Terminal

Block TypePrice Per

Block/Terminal

GK6 channel mounted $2.20

GA6 $ 1.90 GK6 direct mounted 1.80

GC6 4.10 GM6 1.90

GCB0115 45.30 GP6 2.30

GCB20150 55.90 GR6 2.20

GD6 8.10 GR6T 2.50

GE6 21.20 GS6 2.50

GF6 9.30 Blank vinyl marking strip .03

GG6 9.70 Pre-numbered (1-25 only) .16

Price per block from the table above ............................... ________

Number of blocks in the assembly................................ x ________

Subtotal (multiply # of blocks by price of blocks)............. ________

Initial Charge for factory assemblies All except 9080GK6 direct mount ($4.70)......... ________

OR for 9080GK6 direct mount ($2.40).............. ________

Vinyl Marking Strips Adder for Suffix M—$0.03 per block................. OR adder for Suffix MPO—$0.16 per block ..... ________

Deduct for Suffix C—$1.60 .............................................. ________

Total up everything from Subtotal down .......................... ________

Apply the following rounding rules to the total obtained: $1.00 through $50.00Round to the nearest dime over $50.00Round to the nearest dollar

How to Order:

To Order Specify Catalog Number

• Class Number• Type Number

Class Type9080 GA612


For additional information, reference Catalog #9080CT9601.

-5
22ights Reserved
03

9/8/03



NEMA Type Terminal BlocksType G—Class 9080

TE

RM

INA

L B

LO

CK

S

Additional track and appropriate end clamps are listed on page 22-16.

3/4" Mounting Track

Style Length (Inches) Type Price Std.

Pack a

Standard Track

3 GH103 $ .60 5 4 GH104 .60 5 5 GH105 .70 5 6 GH106 .70 5 7 GH107 .70 5 8 GH108 2.00 5 9 GH109 2.00 510 GH110 2.20 511 GH111 2.20 512 GH112 2.30 513 GH113 2.30 514 GH114 2.50 515 GH115 2.60 516 GH116 2.80 517 GH117 2.90 518 GH118 3.20 536 GH136 7.70 548 GH148 10.10 572 GH172 15.10 5

Snap-Off Track

36 GH236 7.70 2048 GH248 10.10 2072 GH272 15.10 20

High Rise 36 GH336 11.00 2

StandardTrack

Snap-OffTrack

High Rise

22

a Orders must specify standard package quantity or multiples of that quantity.

Accessories

Description Type Price Std.Pack a

End Clamps

Screw-on End Clamp (Not recommended for use on snap-off mounting track)

GH10 $1.60 50

Slip-in End Clamp (Not to be used with 9080 GE6, GK6 blocks)

GH11 .42 50

Jumpers

2-pole jumper for GM6 GH700 .39 20

6-pole jumper for GM6 GH710 .81 10

2-pole jumper for GK6, GR6 GH72 .41 20

6-pole jumper for GK6, GR6 GH73 1.20 10

2-pole jumper for GC6 GH74 .42 10

6-pole jumper for GC6 GH75 1.86 10

2-pole jumper for GD6 GH76 1.40 10

6-pole jumper for GD6 GH77 4.20 10

2-pole jumper for GA6, GP6 GH78 .82 10

6-pole jumper for GA6, GP6 GH79 1.35 10

Fanning Strip

Snap-together fanning strip section for GA6 blocks GH51 2.00 10

Snap-together fanning strip section for GK6, GR6 blocks GH52 2.20 10

Snap-together fanning strip section for GP6 blocks GH53 2.00 10

22

Marking and Additional Accessories

Description Type Price Std. Pack a

25 ft. blank vinyl marking strip GH220 $ 7.90 1

For GK6, GR6 GH21 2.90 5

For GA6, GP6 GH22 2.90 5

For GM6 GH230 2.90 5

Blank pin-feed marking tabs—6 x 20 (total 120) marking tabs for GR6, GD6 and GT6 blocks

GH200 1.10 20

Pre-marked 2 times 01 to 50 plus 20 various marking tabs (total 120 marking tabs) for GR6, GD6 and GT6 blocks

GH210 8.70 5

Marking pen with permanent, fine line black ink GH40 3.50 12

Marking strip end plug for GK6, GR6, GM6, GA6, GP6, GC6, GD6, GE6 and GT6 blocks

GH60 .26 50

Transition barrier between GK6 and all other G or K blocks GH61 .65 50

Cover for GR6 or GR6T blocks GH62 .65 50

Banana test plug for GR6T block GH90 2.90 10

Test plug adapter for GR6T block (included as standard with GR6T) GH91 .26 50

Stacking Bridge Kit—includes 2 brackets as shown GH81 25.10 1

Angle bracket kit—for mounting 9080GH or MH track to panel at 45 degree angle. Includes 2 brackets and hardware for mounting track to brackets

MH82 4.80 1

Polycarbonate end clamp for 35 mm DIN 3 track, 8 mm (0.31") wide MHA10 1.60 50

Vinyl marking stripnumbered 1-25


How to Order:


• Class Number• Type Number

Class Type9080 GH10

© 2003 Schneider Electric All Rights ReservedCP5 Discount

/03
-6 9/8
9/8/03

Schedule

IEC Type Terminal BlocksAB1RR Spring Clip Blockswww.SquareD.com


22T

ER

MIN

AL B

LO

CK

S

a Orders must specify standard package quantity (Std. Pack) or multiples of that quantity.b These maximum current values assume the use of insulated copper conductors with 75°C temperature rating and are calculated based on NEC Article 310, Table 310-16. In most cases this value is

the maximum ampacity of the wire which has the greatest current carrying capacity. The actual allowable current for a particular application is dependent upon the size, insulation class and other characteristics of the wire used. The UL ratings are shown. The CSA rating may be higher or lower. Refer to the catalog for CSA ratings.

c One end barrier is required for each assembly of like blocks.

Description MaximumVoltage

Maximum Current

b

Block End Barrierc

Color Catalog Number Price Each

Std. Packa


Std. Packa

5 mm (0.20") wide

Spring Clip Type Block Two Terminals

Solid or StrandedCopper Wire22–12 AWG

600 V 20 A

Grey AB1RR235U2GR $1.30 100 Grey AB1RRAC242GR $0.52 10

Blue AB1RR235U2BL 1.30 100 Blue AB1RRAC242BL 0.52 10

5 mm (0.20") wide

Spring Clip Type BlockThree Terminals


600 V 20 A

Grey AB1RR235U3GR 1.80 100 Grey AB1RRAC243GR 0.62 10


5 mm (0.20") wide

Spring Clip Type BlockFour Terminals


600 V 20 A



6 mm (0.24") wide

Spring Clip Type BlockTwo Terminals


600 V 30 A



5 mm (0.20") wide

Spring Clip TypeGrounding BlockTwo Terminals


600 V 20 A Green /Yellow AB1RRTP235U2 4.80 100 Green AB1RRTPAC242 0.62 10

5 mm (0.20") wide

Spring Clip TypeGrounding BlockFour Terminals



6 mm (0.24") wide

Spring Clip TypeGrounding BlockTwo Terminals



6 mm (0.24") wide

Spring Clip TypeDiode/Fuseholder Block


300 V 10 A Grey AB1RRSF435UGR 3.50 100 Grey AB1RRSCAC4 0.62 10

FuseHolder 5x20 (Fuse not included)

Depends on fuse or diode used

Grey AB1SF520 4.30 100

Not applicable

FuseHolder 5x20 + 24 V LED Grey AB1SF520B 13.50 100

FuseHolder 5x20 + 220 V LED Grey AB1SF520M 13.50 100

Holder For Diode (Diode not included) Grey AB1SV1 4.10 100

Holder with 1N4007-1 Diode Grey AB1SV2 10.00 100

File CCN

E164359 XCFR2

File Class

LR89150 6228 01

All R9/8/0

For track and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-16


For additional information, reference Catalog #9080CT9901R5/02.

-7
22ights Reserved3
9/8/03



IEC Type Terminal BlocksAB1VV Box Lug Blocks

TE

RM

INA

L B

LO

CK

S
22
a Orders must specify standard package quantity (Std. Pack) or multiples of that quantity.b These maximum current values assume the use of insulated copper conductors with 75 °C temperature rating and are calculated based on NEC Article 310, Table 310-16. In most cases this value

is the maximum ampacity of the wire which has the greatest current carrying capacity. The actual allowable current for a particular application is dependent upon the size, insulation class and other characteristics of the wire used. The UL rating are shown. The CSA rating may be higher or lower. Refer to the catalog for CSA ratings.



Maximum Current

b

Block End Barrier c


Std. Pack a Color Catalog Number Price

EachStd.

Pack a

5 mm (0.20") wide

Box Lug Type Block

Solid or Stranded Copper Wire 22–12 AWG

600 V 20 A

Grey AB1VV235U $0.93 100 Grey AB1AC24 $0.41 50

Blue AB1VV235UBL 0.93 100 Blue AB1AC24BL 0.41 50

Orange AB1VV235UGE 0.93 100 Orange AB1AC24GE 0.41 50

6 mm (0.24") wide

Box Lug Type Block


600 V 30 A

Grey AB1VV435U 0.97 100 Grey AB1AC24 0.41 50



Black AB1VV435UNO 0.97 100 Grey AB1AC24 0.41 50

Red AB1VV435URO 0.97 100 Grey AB1AC24 0.41 50

Green AB1VV435UVE 0.97 100 Grey AB1AC24 0.41 50

White AB1VV435UBLA 0.97 100 Grey AB1AC24 0.41 50

8 mm (0.31") wide

Box Lug Type Block


600 V 50 A

Grey AB1VV635U 1.40 100 Grey AB1AC6 0.41 50



10 mm (0.39") wide

Box Lug Type Block


600 V 65 A

Grey AB1VVN1035U 1.80 50 Grey AB1ACN10 0.52 10

Blue AB1VVN1035UBL 1.80 50 Blue AB1ACN10BL 0.52 10

12 mm (0.47") wide

Box Lug Type Block


600 V 85 A

Grey AB1VVN1635U 3.60 50 Grey AB1ACN16 0.62 10

Blue AB1VVN1635UBL 3.60 50 Blue AB1ACN16BL 0.62 10

16 mm (0.63") wide

Box Lug Type Block


600 V 95 A

Grey AB1VVN3535U 5.10 20

Not required for these blocks.

Blue AB1VVN3535UBL 5.10 20

24 mm (0.94") wide

Box Lug Type Block

Solid or Stranded Copper Wire 6–2/0 AWG

600 V 175 A

Grey AB1VVN7035U 18.60 20



28 mm (1.10") wide

Box Lug Type Block

Solid or Stranded Copper Wire 2/0–350 kcmil

600 V 335 A

Grey AB1VVN15035U 43.50 10



For track and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-16File CCN

E164359 XCFR2

File Class

LR89150 6228 01

22-

ditional information, reference Catalog #9080CT9901R5/02.


For ad

ved/03
8
All Rights Reser9/8

9/8/03


IEC Type Terminal BlocksAB1TP Grounding and AB1ET Two Tier Blockswww.SquareD.com


22T

ER

MIN

AL B

LO

CK

S



Maximum Current

b

Block End Barrier c

Color Catalog Number

Price Each

Std. Packa


Price Each

Std. Packa

6 mm (0.24") wide

Grounding Block


600 V 20 A Green/Yellow AB1TP435U $4.10 100 Not required for this block.

8 mm (0.31") wide

Grounding Block

Solid or Stranded Copper Wire22–8 AWG

600 V 30 A Green/Yellow AB1TP635U 4.60 100 Not required for this block.

10 mm (0.39") wide

Grounding Block



12 mm (0.47") wide

Grounding Block



16 mm (0.63") wide

Grounding Block



Description

Block End Barrier c


Std. Packa


Price Each

Std. Packa

6 mm (0.24") wide

Two Tier Blocks


300 V 20 A b

Standard two tier block Grey AB1ET435U $ 2.69 100

Grey AB1TE $0.72 50

Standard two tier block + upper-lower link Black AB1ET435U2 4.10 100

Standard two tier block+ grounding

Green/Yellow AB1ET435UTP 12.40 100

Standard two tier block + red 24 V LED Red AB1ET435UBRO 11.40 100

Standard two tier block + green 24 V LED Red AB1ET435UBVE 11.40 100

Standard two tier block + head to tail diodes (red) Orange AB1ET435UBGE 11.40 100

Standard two tier block + diode upper-lower Red AB1ET435UHBRO 7.20 100

Standard two tier block+ diode lower-upper Orange AB1ET435UBHGE 7.20 100

Standard two tier block + 2 diodes Red AB1VV435U2DRO 12.80 100

File CCN

E164359 XCFR2

File Class

LR89150 6228 01 For track and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-16

All R9/8/

itional information, reference Catalog #9080CT9901R5/02.


For add

-9
22ights Reserved
03

9/8/03



IEC Type Terminal BlocksAB1DD, AB1ET Three Tier and AB1ETN Two Tier Blocks

TER

MIN

AL

BLO

CK

S
22




Maximum Current

b

Block End Barrier c


Std. Packa


Price Each

Std. Packa

6 mm (0.24") wide

Three Tier BlockSolid or Stranded

Copper Wire22–12 AWG

300 V 25 A

Grey

AB1DDP235U $ 3.60 100


Three Tier Blockw / 24 V LED (+) Solid or Stranded

Copper Wire 22–12 AWG

AB1DDP235ULP 6.70 100

Three Tier Block w / 24 V LED (-)

Solid or StrandedCopper Wire 22–12 AWG

AB1DDP235ULM 6.70 100

6 mm (0.24") wide

Three Tier Block w / ground


Grey with Green/Yellow

AB1DDP235T 5.70 100

Three Tier Block w / 24 V LED (+) and ground


AB1DDP235TLP 8.80 100

Three Tier Block w / 24 V LED (-) and ground


AB1DDP235TLM 8.80 100

6 mm (0.24") wide

Three Tier Block Solid or Stranded

Copper Wire22–12 AWG

Grey AB1ET3235U 5.70 100

Three Tier Block w / 24 V LED (+) and ground


Grey with Green/Yellow

AB1ET3235UTLP 18.50 100

Three Tier Block w / 24 V LED (-) and ground


AB1ET3235UTLM 18.50 100

Three Tier Block w /ground


AB1ET3235UT 8.40 100


Maximum Current

b

Block End Barrier c


Price Each

Std. Packa


Price Each

Std. Packa

6 mm (0.24") wide

Two Tier Block (one terminal in and two out )


300 V 30 A

Grey AB1ETN335U $2.38 100 Grey AB1TEN3 $0.72 10

Two Tier Block (two terminals in and two out )


Grey AB1ETN435U 3.40 100 Grey AB1TEN4 0.83 10

Grounding Block (two terminals in and two out )


Green/Yellow AB1ETNTP435U 8.10 100 Not required for this block.

File CCN

E164359 XCFR2

File Class

LR89150 6228 01

22-1




d5
0
All Rights Reserve12/9/0

12/9/05


IEC Type Terminal BlocksAB1FU and AB1SF/SV Fuseholderswww.SquareD.com


22T

ER

MIN

AL B

LO

CK

S




The AB1FU10135, AB1FU10235U, and AB1FU10335U are not UL component recognized.

DescriptionBlock End Barrier c


Price Each

Std. Pack a Color Catalog

NumberPrice Each

Std. Pack a

8 mm (0.31") wide

Fuse Block For 5x20 or 5x25 mm fuse


Maximum Voltage—600 V Maximum Current—15 A b

Open up with no indicator Grey AB1FUSE435U5X $ 5.20 100

Not required for these blocks.With 5–12 V LED indicator Grey AB1FUSE435U5XJ 10.70 50With 12–24 V LED indicator Grey AB1FUSE435U5XB 10.70 50

With 110–250 V neon indicator Grey AB1FUSE435U5XM 10.70 50

10 mm (0.39") wide

Fuse Block For 1/4 x 1 1/4 inch fuse



Open up with no indicator Grey AB1FUSE435U6X 9.60 100

Not required for these blocks.With 5–12 V LED indicator Grey AB1FUSE435U6XJ 12.40 50With 12–24 V LED indicator Grey AB1FUSE435U6XB 12.40 50

With 110–250 V neon indicator Grey AB1FUSE435U6XM 12.40 50

12 mm (0.47") wide

Fuse Block For 5 x 20 mm fuse



Open up with no indicator Grey AB1FU10135U 7.20 50

Grey AB1TF $0.93 50With 28 V yellow LED indicator Grey AB1FU10135UB 17.60 50

With 250 V yellow LED indicator Grey AB1FU10135UU 17.60 50




With no indicator Grey AB1FU10235U 9.30 50 Grey AB1TF 0.93 50




With no indicator Grey AB1FU10335U 10.40 50 Grey AB1TF 0.93 50

Fuse Block For 1/4 x 1 1/4 inch fuse



Open up with no indicator Grey AB1FU10435U 10.40 50

Grey AB1TF 0.93 50With 28 V yellow LED indicator Grey AB1FU10435UB 17.60 50

With 110–500 V red neon indicator Grey AB1FU10435UFS 17.60 50

6 mm (0.24") wide

Fuse / Diode Block

Solid or StrandedCopper Wire 22–10 AWG


Fuse / Diode block Grey AB1SF435U 2.60 100 Grey AB1PS4 0.57 50Removable fuse holder

for 5x20 mm fuse Grey AB1SF520 4.30 100

N/A

Removable fuse holder for 5x20 mm fuse

with 24 V red LED indicatorGrey AB1SF520B 13.50 100

Removable fuse holder for 5x20 mm fuse

with 220 V red LED indicatorGrey AB1SF520M 13.50 100

Removable diode or resistor holder Grey AB1SV1 4.10 100

Removable holder With 1N4007.1 diode Grey AB1SV2 10.40 100

File CCN

E164359 XCFR2

File Class

LR89150 6228 01

Modular Fuse HoldersRated Thermal

CurrentSize of Cartridge

Fuse or Link Composition Standard PackQuantity

Catalog Number Price

DF6AB10 GK1DF

32 A 10 x 38 mm(0.39 X 1.50 in.)

1 Pole 12 DF6AB10 $ 7.20

2 Poles 6 GK1DD 14.50

3 Poles 4 GK1DF 21.70

Approvals when using appropriate U.S. fuses:

File CCN

E190993 IZLT2

File CCN

E190993 IZLT8

For: DF6AB10, GK1DD, GK1DF


© 20All R9/8/
-11 22
03 Schneider Electric ights Reserved

03

9/8/03



IEC Type Terminal BlocksAB1 Other Blocks

TE

RM

INA

L B

LO

CK

S
22



Description

Block End Barrierc


Std. Packa


Price Each

Std. Packa

12 mm (0.47") wide

Block for Diodes (Diodes not included)


Grey AB1D11435U $8.30 50 Not required for this block.

6 mm (0.24") wide

Circuit Isolation Block


Maximum Voltage—600 V Maximum Current—20 Ab

With no test sockets Grey AB1SC435U 4.70 50

Grey AB1PS4 $0.57 50

With two test sockets Grey AB1SC435U2PT 4.70 50

6 mm (0.24") wide

Box Lug / Slip-on Block



Box lug on one side. Slip-on access from top

and sideGrey AB1FV135U 2.00 100 Grey AB1TC01 0.93 50

Box lug on one side. Slip-on access from top Grey AB1FC335U 2.60 100 Grey AB1TC3 0.93 50

Slip-on connectors on both sides Grey AB1FF235U 1.40 100 Not required for this block.

Description

Block Partition


Price Each

Std. Packa


Price Each

Std. Packa

32 mm (1.26") wide

Lug / Lug Block


M10 bolt


Grey AB1BB9535 $14.20 10 Grey AB1CT1 $1.60 50

42 mm (1.65") wide

Lug / Lug Block


M12 bolt

Maximum Voltage—600 VMaximum Current—325 Ab

Grey AB1BB18535 18.20 10 Grey AB1CT2 1.80 50

42 mm (1.65") wide

Lug / Lug Block


M12 bolt


Grey AB1BB24035 30.00 10 Grey AB1CT2 1.80 50

32 mm (1.26") wide

Lug / Clamp Block


M10 bolt


Grey AB1BC9535 20.70 10 Grey AB1CT1 1.60 50

42 mm (1.65") wide

Lug / Clamp Block


M12 bolt



42 mm (1.65") wide

Lug / Clamp Block


M12 bolt



File E164359 File LR89150
CCN XCFR2 Class 6228 01
22-1


itional information, reference Catalog #9080CT9901R5/02.


For add

ed/03
2
All Rights Reserv9/8

9/8/03


IEC Type Terminal BlocksAB1VV and AB1TP Miniature Blocks

AB1RR Spring Clip Terminalswww.SquareD.comFor the most up-to-date information

22T

ER

MIN

AL B

LO

CK

S





Maximum Current

b

Block End Barrier c


Price Each

Std. Packa


Price Each

Std. Packa

5 mm (0.20") wide

Miniature Block with Box Lug


Mounts on 15 mm DIN 2 track

300 V 10 A

Grey AB1VV215 $1.00 100 Grey

AB1AC2 $0.41 50

Blue AB1VV215BL 1.00 100 Blue

5 mm (0.20") wide

Miniature Block with Box Lug



600 V 10 A Grey AB1VV415 1.10 100 Grey AB1AC2 0.41 50

6 mm (0.24") wide

Miniature Grounding Block

with Box Lug



300 V 10 A Green/Yellow AB1TP215 2.90 100 Grey AB1CT215 0.41 50

Spring Clip Terminal: Passthrough Block


Maximum Currentb

Wire Size

Block End Barrierc

No. of Poles Color Catalog Number Price

Std. Packa

Color Catalog Number PriceStd. Packa

Spring Clip Termination Connector: Passthrough Block Solid or Stranded Copper Wire

AB1RR235U2t t

UL 600 V 20 A 22–12 AWG 2 Grey AB1RR235U2GR $1.30 100 Grey AB1RRAC242GR $.52 10

CSA 600 V 25 A 24–12 AWG 2 Blue AB1RR235U2BL 1.80 100 Blue AB1RRAC242BL .52 10

UL 600 V 30 A 22–10 AWG 2 Grey AB1RR435U2GR 1.60 100 Grey AB1RRAC242GR .52 10


UL 600 V40 A

24–8 AWG 2 Grey AB1RR635U2GR 2.30 100

CSA 600 V 20–10 AWG 2 Blue AB1RR635U2BL 2.30 100

UL 600 V55 A

24–6 AWG 2 Grey AB1RR1035U2GR 2.60 50


UL 600 V75 A

24–4 AWG 2 Grey AB1RR1635U2GR 3.80 50


AB1RRTP235U4







Spring Clip TerminationConnector: Grounding Block

UL 600 V 20 A 22–12 AWG2 Green/

Yellow AB1RRTP235U2 4.80 100 Green/Yellow AB1RRTPAC242 .62 10

CSA 600 V 25 A 24–12 AWG

UL 600 V 20 A 22–12 AWG4 Green/

Yellow AB1RRTP235U4 5.40 100 Green/Yellow AB1RRTPAC244 .62 10

CSA 600 V 25 A 24–12 AWG

5 mm (0.20") wide

5 mm (0.20") wide

File CCN

E164359 XCFR2

File Class

LR89150 6228 01

All R9/8/0

ditional information, reference Catalog #9080CT9901R5/02.

For track and accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 22-16


For ad

-13
22ights Reserved3
9/8/03



IEC Terminal BlocksAB1AA Miniature Blocks

22-1

TE

RM

INA

L B

LO

CK

S

5 mm (0.20") wide

End Barrierc

Insulation Displacement Style Terminal Blocks and Accessories

• Insert wires without stripping

• Available for wire sizes 30-14 AWG

• DIN 3 rail mounting

• Finger safe connections

The complete line is available in the IEC Sectional Terminal Block Catalog #9080CT9901R5/02.

22

x





Maximum Currentb Wire Size

Block

No. of Poles Color Catalog Number Price Std.

Packa Color Catalog Number Price Std. Packa

Insulation Displacement Connector: Passthrough Block Solid or Stranded Copper Wire

AB1AA135U2t t

UL 600 V 13 A 30–18 AWG 2 Grey AB1AA135U2GR $ 1.20 100 Grey AB1AAAC122GR $.41 10

CSA 600 V 7 A 24–18 AWG 2 Blue AB1AA135U2BL 1.20 100 Blue AB1AAAC122BL .41 10

UL 600 V 13 A 18–14 AWG 2 Grey AB1AA235U2GR 1.30 100 Grey AB1AAAC122GR .41 10










Insulation DisplacementConnector: Grounding Block

AB1AATP135U3

UL 600 V 13 A 30–18 AWG2 Green/

Yellow AB1AATP135U2 3.90 100 Green/Yellow AB1AAAC122VE .41

10

CSA 600 V 120 A/45s 24–18 AWG 10

UL 600 V 13 A 18–14 AWG2 Green/

Yellow AB1AATP235U2 4.10 100 Green/Yellow AB1AAAC122VE .41

10

CSA 600 V 300 A/45s 16–14 AWG 10

UL 600 V 10 A 30–18 AWG3 Green/

Yellow AB1AATP135U2 3.90 100 Green/Yellow AB1AAAC123VE .52 10

CSA 600 V 120 A/45s 24–18 AWG

UL 600 V 10 A 18–14 AWG3 Green/


CSA 600 V 300 A/45s 16–14 AWG

UL 600 V 10 A 30–18 AWG4 Green/


CSA 600 V 120 A/45s 24–18 AWG

UL 600 V 10 A 18–14 AWG4 Green/


CSA 600 V 300 A/45s 16–14 AWG

Two Tier BlockUL 600 V 10 A 30–18 AWG 2

Grey AB1AAET135UGR 3.20 50 Grey AB1AAAC124GR .62 10CSA 600 V 7 A 24–18 AWG 2

AB1AAET235t t

ULCSA

600 V600 V

10 A20 A

18–14 AWG16–14 AWG

2Grey AB1AAET235UGR 3.40 50 Grey AB1AAAC124GR .62 10

2

2Red AB1AAET235URO 3.40 50 Red AB1AAAC124GR .62 10

2

2Orange AB1AAET235UGE 3.40 50 Orange AB1AAAC124GR .62 10

2

4 Red AB1AAET235UBRO 10.40 50 Red AB1AAAC124GR .62 10

4 Orange AB1AAET235UBGE 10.40 50 Orange AB1AAAC124GR .62 10

Fuse Block

AB1AASF135Ut t

UL 600 V 6.3 A 30–18 AWG 2 Grey AB1AASF135UGR 3.30 50 Grey AB1AAAC123GR .52 10

CSA 600 V 10 A 24–18 AWG 2 Blue AB1AASF135UBL 3.30 50 Blue AB1AAAC123BL .52 10

UL 600 V 6.3 A 18–14 AWG 2 Grey AB1AASF235UGR 3.40 50 Grey AB1AAAC123GR .52 10

CSA 600 V 10 A 16–14 AWG 2 Blue AB1AASF235UBL 4.00 50 Blue AB1AAAC123BL .52 10

Disconnect BlockUL 600 V 10 A 18–14 AWG 2 Grey AB1AASC235UGR 3.50 50 Grey AB1AAAC123GR .52 10

CSA 300 V 17 A 16–14 AWG 2 Blue AB1AASC235UBL 4.00 50 Blue AB1AAAC123BL .52 10

5 mm (0.20") wide

5 mm (0.20") wide

6 mm (0.24") wide

6 mm (0.24") wide

AB1AA135U4t t

File CCN
E164359 XCFR2

File Class

LR89150 6228 01

ed/03 4

9/8/03


IEC Type Terminal BlocksAB1 Markerswww.SquareD.com


22T

ER

MIN

AL B

LO

CK

S

a Orders must specify standard package quantity (Std. Pack) or multiples of that quantity.

Marking Catalog Number Price Each Std.

Pack a

Black number on white background

5 mm (0.20") wide

Blank AB1BV5

$0.52 25

1–10 AB1B510

11–20 AB1B520

21–30 AB1B530

31–40 AB1B540

41–50 AB1B550

51–60 AB1B560

61–70 AB1B570

71–80 AB1B580

81–90 AB1B590

91–100 AB1B5100


6 mm (0.24") wide

Blank AB1BV6

0.52 25

1–10 AB1B610

11–20 AB1B620

21–30 AB1B630

31–40 AB1B640

41–50 AB1B650

51–60 AB1B660

61–70 AB1B670

71–80 AB1B680

81–90 AB1B690

91–100 AB1B6100

L1 AB1B6L1

L2 AB1B6L2

L3 AB1B6L3

+ (Red) AB1BV6RP

x—(Blue) AB1BV6BM


8 mm (0.31") wide

Blank AB1BV8

0.52 25

1–10 AB1B810

11–20 AB1B820

21–30 AB1B830

31–40 AB1B840

41–50 AB1B850

51–60 AB1B860

61–70 AB1B870

71–80 AB1B880

81–90 AB1B890

91–100 AB1B8100

Black number or symbol on white background

Blank AB1RV

0.52 25

1 AB1R1

2 AB1R2

3 AB1R3

4 AB1R4

5 AB1R5

6 AB1R6

7 AB1R7

8 AB1R8

9 AB1R9

0 AB1R0

0–9 AB1R11

+ AB1R12

– AB1R13

12345678910AB1B510

12345678910

AB1B610

12345678910

AB1B810

2 2 2 2 2 2 2 2 2 2

AB1R2

All R9/8/

Marking Catalog Number Price Each Std.

Pack a

Black capital letters on whitebackground

A AB1GA

$0.52 25

B AB1GB

C AB1GC

D AB1GD

E AB1GE

F AB1GF

G AB1GG

H AB1GH

I AB1GI

J AB1GJ

K AB1GK

L AB1GL

M AB1GM

N AB1GN

O AB1GO

P AB1GP

Q AB1GQ

R AB1GR

S AB1GS

T AB1GT

U AB1GU

V AB1GV

W AB1GW

X AB1GX

Y AB1GY

Z AB1GZ

AB1SR6 0.52 200

AB1SA1 0.52 500

AB1SA2 0.52 500

AB1SA3 0.52 500

AB1RT 0.52 500

AR1SB2 1.20 100

AR1SB3 0.62 50

A A A A A A A A A A

AB1GA



-15
22ights Reserved
03

9/8/03



IEC Type Terminal BlocksMounting Track and End Clamps

TE

RM

INA

L B

LO

CK

S
22
a Orders must specify standard package quantity (Std. Pack) or multiples of that quantity.

DIN 3 Track – Various Lengths

Description LengthClass 9080Type

PriceEach

Std. a

Pack

Symmetrical rail 35 x 7.5 mm(1.38" x .295") in compliance with

EN 50022 standard (DIN 46277-3).

Galvanized steel,(no

mounting holes)

0.08 m / 3" MH203 $ 2.10

10

0.10 m / 4" MH204 2.400.13 m / 5" MH205 2.700.15 m / 6" MH206 3.100.18 m / 7" MH207 3.400.20 m / 8" MH208 3.700.23 m / 9" MH209 4.100.25 m / 10" MH210 4.500.28 m / 11" MH211 4.800.30 m / 12" MH212 5.200.33 m / 13" MH213 5.500.36 m / 14" MH214 5.800.38 m / 15" MH215 6.200.41 m / 16" MH216 6.500.42 m / 17" MH217 6.800.46 m / 18" MH218 7.20

0.50 m / 19.68" MH220 7.701 m / 39.37" MH239 13.102 m / 78.74" MH279 19.70

Galvanized steel,

prepunched

0.08 m / 3" MH303 2.300.10 m / 4" MH304 2.600.13 m / 5" MH305 3.100.15 m / 6" MH306 3.400.18 m / 7" MH307 3.800.20 m / 8" MH308 4.100.23 m / 9" MH309 4.600.25 m / 10" MH310 4.900.28 m / 11" MH311 5.400.30 m / 12" MH312 5.700.33 m / 13" MH313 6.100.36 m / 14" MH314 6.400.38 m / 15" MH315 6.800.41 m / 16" MH316 7.200.42 m / 17" MH317 7.700.46 m / 18" MH318 8.00

0.50 m / 19.68" MH320 8.701 m / 39.37" MH339 15.302 m / 78.74" MH379 21.80

High rise track Aluminum 1 m /39.37" MH439 18.60 2

Dimensions

Angle bracket kitCatalog Number

PriceEach

Std. aPack

For mounting 9080GH or MH track to a panel at 45° angle. Includes 2 brackets and hardware for mounting the track to the brackets.

9080MH82 $4.80 1

End Clamps

Plastic end clamp for 35 mm DIN 3 track, 8 mm (0.31") wide AB1AB8P35 1.00 100

Metal end clamp for 35 mm DIN 3 track, 8 mm (0.31") wide AB1AB8M35 1.60 100

Polycarbonate end clamp for 35 mm DIN 3 track, 8 mm (0.31") wide 9080MHA10 1.60 50

.256

A

.308.04

1

.9825

1.3835

9080MH3**

.7118

.9825

1.8046

1.1730

9080MHA10

22-1
Mounting Track 1 or 2 meter length

Description Length Catalog Number

Price Each

Std. aPack

DIN 315 mm depth, 1 mm steel,

zinc chromated

2 m / 78.74" AM1ED200 $ 9.80 10

15 mm depth, 1.5 mm steel, zinc chromated

2 m / 78.74" AM1DE200 14.50 10

7.5 mm depth, 1 mm steel, zinc chromated

EN 50022 & NF C63-015

2 m / 78.74" AM1DP200 5.20 10

DIN 1Asymmetrical 32 mm trackEN 50035 & NF C63-018

15 mm steel, zinc chromated

2 m / 78.74" DZ5MB201 15.50 10

DIN 2Symmetrical 15 mm track

EN 500451 m / 39.37" AB1PC15 5.00 10

Dimensions

End Clamps Catalog Number

PriceEach

Std. aPack

Plastic end clamp for 32 mm DIN 1 track, 7.5 mm (0.30") wide AB1AB7P32 $ 1.70 100

Metal end clamp for 32 mm DIN 1 track, 7.5 mm (0.30") wide AB1AB10M32 1.70 100

Plastic end clamp for 15 mm DIN 2 track, 7.5 mm (0.30") wide AB1AB715 1.00 100

AM1ED200

1.3835

1.0627

.28778.74

2000.5915

.041

.4912

.9825

.9825

.9825

.308

AM1DE200

.062

1.3835

78.742000

.5915

1.0627

AM1DP200

1.0627

1.3835

.28778.74

2000

.4912

.9825

.9825

.9825

.308

.041

DZ5MB201

.246

.6517

.062 .59

15

1.2632

78.742000

.041

AB1PC15

39.371000

.205

.349

.5915

ed/03
6

9/8/03


Thermal-Magnetic Circuit ProtectorsClass 9080—Type GCBwww.SquareD.com


BLO

CK

S

All R9/8/

GCB100

www.SquareD.comFOR CURRENT INFORMATION

GB2-CB06

GB2-CD

a These maximum current values assume the use of insulated copper conductors with 75°C temperature rating, and are calculated based on NEC Article 310, Table 310-16. In most cases this value is the maximum ampacity of that wire or combination of wires (as listed in the above table) which has the greatest current carrying capacity. The actual allowable current for a particular application is dependent upon the number, size, insulation class and other characteristics of the wires used.

b Replacement adapter is 9080GH64, $1.10 each, standard pack of 10.

MaximumCurrentb

Internal Resistance¾

MaximumVoltage Catalog Numbera Price

0.1 133

250 Vac65 Vdc

GCB01

$43.70

0.5 6.6 GCB05 0.8 2.55 GCB08 1.0 1.97 GCB10 1.2 1.22 GCB12 1.5 0.86 GCB15

2.0 0.49 GCB20

48.00

2.5 0.31 GCB25 3.0 0.20 GCB30 4.0 0.10 GCB40

5.0 0.08 GCB50 7.0 0.03 GCB70

10.0 <0.02 125 Vac65 Vdc

GCB10015.0 <0.02 GCB150

Selection:In order to properly select a Class 9080 Type GCB circuit protector, follow the following steps:1. Determine the inrush correction factor from Table A at right.2. Determine the temperature correction factor from Table B at right.3. Determine the sealed current of the load that is being protected.4. Multiply the sealed current by the two correction factors and choose the

closest circuit protector. Note: Choosing a circuit protector with a value lower than the calculated value might cause nuisance tripping, while

Table A—Inrush Ratio Correction Table Note: For resistive loads, use inrush correction factor of 1.0.

Inrush Ratio 1:1 to 1:4 1:5 1:6 1:7 1:8

Factor 1.3 1.4 1.5 1.6 1.7

Table B—Ambient Temperature Correction Table

22T

ER

MIN

AL
choosing the larger might provide a protector that will not properly
protect the load.Example: Solenoid with sealed current of .75 A, an inrush ratio of 1:6 and in an ambient temperature of 85°F. .75 x 1.5 x 1.05 = 1.18 Choose the 1.2 A protector

Tripping Time:Tripping time of the circuit protector is determined from Table C at right. Divide the circuit protector value by the temperature correction factor from Table B above to determine actual rated current referenced in Table C.

No

Te

Ta

Pe

Tr(

te: When several protectors are channel mounted adjacent to each other, the “no trip” current will be 80% of rated current at 70°F.

Ambientmperature

70°F(21.1°C)

100°F(37.8°C)

120°F(48.9°C)

140°F(60°C)

160°F(71.1°C)

180°F(82.2°C)

200°F(93.3°C)

Factor 1.0 1.1 1.2 1.3 1.4 1.5 1.6

ble C—Tripping Times in Seconds at 70°F (21.1°C)

rcent ratedcurrent 100% 200% 300% 400% 500% 600% 1000% 2000% and

greater

ipping Timeseconds) no trip 10–40 38 1.5–9 .8–6 .003–4 .003–2 Max. .02

File CCN

E152841 QVNU2

File UL1077

File LR25490

For additional information, reference the NEMA Type Terminal Block Catalog #9080CT9901R5/02.


Thermal-Magnetic Circuit ProtectorGB2

TMP

File CCN

E164873 QVNU2

c Must order in multiples of 6.For markers, use AB1tR and AB1tG markers from page 22-15.


Thermal Rating

Catalog Number

Price Each c

One pole Thermal Magnetic Circuit Protector

300 Vac

0.5 A GB2CB05

$21.80

1 A GB2CB06

2 A GB2CB07

3 A GB2CB08

4 A GB2CB09

5 A GB2CB10

6 A GB2CB12

8 A GB2CB14

10 A GB2CB16

12 A GB2CB20


Thermal Rating

Catalog Number

Price Each c

wo pole Thermal agnetic Circuit rotector

300 Vac

0.5 A GB2CD05

$26.20

1 A GB2CD06

2 A GB2CD07

3 A GB2CD08

4 A GB2CD09

5 A GB2CD10

6 A GB2CD12

8 A GB2CD14

10 A GB2CD16

12 A GB2CD20

For additional product and information, reference Catalog #9080CT9901R5/02.

File UL1077 File Class

LR25490 321501

IEC 157-1 VDE 0660


-17
22ights Reserved
03

9/8/03

I DiscountSchedule


Power Distribution BlocksClass 9080—Type LB

22T

ER

MIN

AL B

LO

CK

S

LBA161104

LBA365212

LBA361104

LBC165212

A3

A2 J Mounting HoleDiameter

a Lugs suitable for use with 75°C conductors. (#) indicates number of conductors.b Aluminum blocks will accept either Al or Cu conductors.c Cu blocks will accept copper conductors only.d CE Marked.e Refer to catalog for dimensions.

Standard Power Distribution BlocksLug WireRange a Aluminum b

Dim.TypeMain Branch

One Pole Two Pole Three PoleType d Price Type d Price Type d Price

(1) #14–2/0 (1) #14–2/0 LBA162101 $ 6.90 LBA262101 $ 14.70 LBA362101 $ 17.10 2(1) #6–350 kcmil (1) #6–350 kcmil LBA163101 35.60 LBA263101 54.00 LBA363101 71.00 3(1) #4–600 kcmil (1) #4–600 kcmil LBA164101 63.00 N/A . . . LBA364101 122.00 4(2) #4–350 kcmil (2) #4–350 kcmil LBA165202 65.00 LBA265202 98.00 LBA365202 126.00 5(2) #4–500 kcmil (2) #4–500 kcmil LBA1652021 90.00 LBA2652021 137.00 LBA3652021 162.00 5(1) #14–2/0 (4) #14–4 LBA162104 20.30 LBA262104 30.50 LBA362104 45.60 2(1) #14–2/0 (6) #14–4 N/A . . . N/A . . . LBA362106 87.00 ...e(1) #6–400 kcmil (4) #14–2 LBA163104 37.20 LBA263104 56.00 LBA363104 75.00 3(1) #6–400 kcmil (6) #14–2 LBA163106 39.30 LBA263106 59.00 LBA363106 81.00 3(1) #6–400 kcmil (8) #14–2 LBA164108 51.00 LBA264108 77.00 LBA364108 107.00 4(1) #4–500 kcmil (6) #14–2/0 LBA165106 84.00 LBA265106 126.00 LBA365106 155.00 5(1) #4–500 kcmil (12) #14–2 LBA165112 89.00 LBA265112 134.00 LBA365112 174.00 5(2) #14–2/0 (6) #14–4 LBA163206 39.80 LBA263206 60.00 LBA363206 81.00 3(2) #4–500 kcmil (8) #14–2/0 LBA165208 84.00 LBA265208 126.00 LBA365208 167.00 5(2) #4–500 kcmil (12) #14–4 LBA165212 90.00 LBA265212 137.00 LBA365212 174.00 5

Miniature Power Distribution BlocksLug Wire Range a Aluminum b

Dim.TypeMain Branch

One Pole Two Pole Three Pole

Type d Price Type d Price Type d Price

(1) #14–2 (1) #14–2 LBA161101 $ 8.90 N/A . . . LBA361101 $ 15.60 1

(1) #14–2 (4) #18–10 LBA161104 17.60 LBA261104 $20.40 LBA361104 38.70 1

Copper Power Distribution BlocksLug Wire Range a Copper

Dim.TypeMain Branch

One Pole Two Pole Three Pole

Type d Price Type d Price Type d Price

(1) #18–1/0 (1) #18–1/0 LBC162101 $ 66.00 N/A . . . LBC362101 $134.00 2

(1) #6–250 kcmil (1) #6–250 kcmil LBC163101 83.00 N/A . . . LBC363101 155.00 3

(1) #14–2/0 (4) #14–4 LBC162104 66.00 LBC262104 $ 98.00 LBC362104 165.00 2

(1) #4–500 kcmil (6) #14–2 LBC163106 102.00 LBC263106 152.00 LBC363106 236.00 3

(2) #14–2/0 (6) #14–4 LBC163206 89.00 LBC263206 134.00 LBC363206 179.00 3

(2) #4–500 kcmil (8) #14–2/0 LBC165208 198.00 N/A . . . LBC365208 395.00 5

(2) #4–500 kcmil (12) #14–2 LBC165212 189.00 N/A . . . LBC365212 378.00 5

Clear Plastic Covers (0.045 in. thick)Note: There are no covers for miniature blocks.

For LBA Type Type Price f Dim. A Dim. B

LBA162..., LBC162 LB21 $ 7.50 1.062 2.750LBA262..., LBC262 LB22 9.00 1.875 2.750LBA362..., LBC362 g LB23 10.50 2.688 2.750LBA163..., LBC163 LB31 8.30 1.782 3.813LBA263..., LBC263 LB32 9.80 3.313 3.813

Dimensions

A1

ED D

F

H

E

G B

C

Dimensions (Inches)

Type A1 A2 A3 B C D E F G H J

1 .76 1.40 2.03 2.29 1.62 .38 .64 .19 1.93 .32 .201

2 1.13 1.94 2.75 2.88 1.78 .56 .81 .31 2.25 .24 .205

3 1.94 3.47 5.00 4.00 2.61 .97 1.53 .31 3.38 .40 .203

4 2.28 4.16 6.04 4.75 2.92 1.14 1.88 .31 4.13 .51 .20

5 3.17 5.88 8.54 5.50 3.12 1.58 2.69 .38 4.75 .50 .265

f Above covers must be ordered in multiples of 5 covers. Above covers are supplied with two self tapping screws per cover.

g Will not work on a 9080LBA362106 block.

Application DataUL component recognized (File E60616 CCN XCFR2).CSA certified (File LR70361).Voltage Rating—Class B & C—600 VBlocks are rated based on NEC Table 310-16 using 75°C wire.Aluminum blocks are tin plated high conductive aluminum.Copper blocks are tin plated high conductive copper.Housing material:• Miniature Blocks are made from high impact thermoplastic rated at

125°C. max. & -40°C. min.

• Full Size Blocks are made from general purpose phenolic rated at 150°C. max. & -40°C. min.

All blocks have a flammability rating of UL 94V-0.

LBA363..., LBC363 LB33 11.30 4.844 3.813LBA164... LB41 9.00 2.125 4.563LBA264... LB42 10.50 4.000 4.563LBA364... LB43 12.00 5.875 4.563LBA165..., LBC165 LB51 9.80 2.719 5.313

LBA265..., LBC265 LB52 11.30 5.656 5.313LBA365..., LBC365 LB53 12.80 8.375 5.313

22-18© 2004 Schneider Electric

All Rights Reserved6/16/04

For additional information, reference Catalog # 9080CT9603.


6/16/04

FuseholdersType FB—Class 9080www.SquareD.com


22T

ER

MIN

AL B

LO

CK

S

Application Information:Base material:a Base is high impact thermoplastic—

maximum operating temperature 125°Cb Base is general purpose phenolic—

maximum operating temperature 150°Cc Base is high impact polyester—

maximum operating temperature 130°C

Clip material:• All 30 and 60 A fuse clips are copper alloy tin plated.• All 100 and 200 A fuse clips are one piece aluminum with copper

spring tin plated.• All Class H, R and J fuses are standard with reinforced fuse clips.

Lug termination:• All 30 A blocks have pressure wire connectors.• All 60, 100 and 200 A blocks have box lug connectors.

Approvals:• The Type M fuseholders are UL component recognized (File

E40747 CCN IZLT2).• The Type H, R, J and CC are UL Listed (File E70747 CCN IZLT).• All fuseholders are CSA certified (File LR70360).

Flammability rating of all FB fuse blocks is UL 94V-0.

d Class R and CC fuseholders accept current limiting Class R & CC fuses only.e Not in stock. Order point—Raleigh, NC.f Specified wire ranges are based on 75°C wire. Wires with temperature ratings other than

75°C are approved while observing NEC Article 310 wire tables for allowable ampacities of insulated conductors. Class R, J and CC fuse blocks are tested and approved for 200,000 AIC in accordance with UL 512.

g Can be mounted directly to a panel or on 35 mm DIN 3 track.h Orders must specify standard package quantity or multiples of that quantity.

250 Volt—Classes H and R

Rating(Amperes)

f

No.of

Poles

Class H Class R d LugWire

RangeType Price Type Price

30a1 FB1211 $ 8.60 FB1211R $12.80 #14–10

Cu2 FB2211 14.60 FB2211R 18.903 FB3211 20.70 FB3211R 24.80

60a1 FB1221 14.60 FB1221R 18.90 #14–2

Cu or Al2 FB2221 26.10 FB2221R 30.503 FB3221 36.90 FB3221R 40.80

100b

1 FB1231 35.10 FB1231R e 39.50

#6–2/0Cu or Al2 FB2231 e 61.00 FB2231R e 65.00

3 FB3231 87.00 FB3231R e 92.00

200c 1 FB1241 e 92.00 . . . . . . #6–250 MCMCu or Al3 FB3241 312.00 . . . . . .

600 Volt—Classes H and R

Rating(Amperes)

f

No.of

Poles

Class H Class Rd LugWire


30b1 FB1611 $ 16.20 FB1611R $ 20.40 #14–10

Cu2 FB2611 28.40 FB2611R 32.303 FB3611 35.90 FB3611R 40.20

60b1 FB1621 20.70 FB1621R e 24.80 #14–2

Cu or Al2 FB2621 34.20 FB2621R e 38.403 FB3621 47.30 FB3621R 52.00

100b1 FB1631 e 39.30 FB1631R e 43.50 #6–2/0

Cu or Al2 FB2631 e 71.00 FB2631R e 75.003 FB3631 98.00 FB3631R 105.00

200c 1 FB1641 104.00 . . . . . . #6–250 MCMCu or Al3 FB3641 351.00 . . . . . .

600 Volt Series—Miniature Fuse Dimension ( " x 1-1 ")

Rating(Amperes)

f

No.of

Poles

Type M Class CCd LugWire


30a1 FB1611M $ 9.00 FB1611CC $ 9.00 #14–10

Cu2 FB2611M 13.20 FB2611CC 14.703 FB3611M 16.20 FB3611CC 16.50

600 Volt—Class H Only—(Copper Only)

Rating(Amperes)

f

No.of

Poles

Class H LugWire

RangeType Price

30b1 FB1611 $ 16.20 #14–10

Cu2 FB2611 28.403 FB3611 35.90

60b1 FB1621C e 21.20 #14–2

Cu2 FB2621C e 36.503 FB3621C 49.40

100b1 FB1631C 41.60 #6–2/0

Cu2 FB2631C e 74.003 FB3631C 105.00

200c 1 FB1641C e 117.00 #6–250 MCMCu3 FB3641C e 387.00

600 Volt – Class J

Rating(Amperes)

f

No.of

Poles

Class J LugWire

RangeType Price

30bg1 FB1611J $17.30 #2–14 AWG

Cu—Al2 FB2611J 30.303 FB3611J 42.30

60b1 FB1621J e 21.30 #2–14

Cu—Al2 FB2621Je 36.003 FB3621Je 50.00

Description Type Price Std. Pack h

35 mm DIN 3 Track AdapterFor 9080 FB*211, FB*211R, FB*611M, and FB*611CC Fuseholders

FBDIN3e

$ 2.70 100

Fuse Sizes—(Diameter x Length)

AmpClass of Fuse

Class H/R—300 V Class H/R—600 V Class M/CC—600 V Class J—600 V

30 " X 2" " X 5" " X 1 " " X 2 "

60 " X 3" 1 " X 5 " N/A 1 " X 2 "

100 1" X 7 " 1" X 7 " N/A N/A

200 1 " X 7 " 1 " X 9 " N/A N/A

FB2221 FB3221R

How to Order:


• Class Number Class Type
• Type Number 9080 FB1211


-19All R7/12
22
ights Reserved/04

7/12/04



NEMA Type Terminal BlocksType K—Class 9080

TE

RM

INA

L B

LO

CK

S
22
a When terminal block length exceeds 12 inches, guide blocks maintain terminal block rigidity.b Orders must specify quantity listed or multiples of quantity listed.c Includes parts required in addition to Type K1 kit when Type KH1 sections are used. KH26

End plug used only on KH1.d Price does not include fuses. Will accept any 13⁄32" dia. by 11⁄2" long ferrule type fuse.e For use with .250 inch wide Slip-On receptacles.f UL Component Recognized. File E60616, CCN XCFR2, and CSA Approved File LR62144,

Class 6228 01.g UL Listed, File E40747, CCN 120S3.h 30 circuit when used with Type KCA1 and 20 circuits with KH1.

Terminal Block Assembly DataTo assemble one complete terminal block, the following components are required:1 –Required number of Type K – blocks. Blocks can be intermixed on same channel.2 – Parts included in Type K1 assembly kit (and KH2 kit if Type KH1 used).3 – Channel can be found on page 22-6.

Terminal Sections

Description Type PriceEach

Std.Pack b

Terminal Block Section with Pressure Wire Connectors. Wire #8–#18 AWG

KC1fa $ 3.60 50

Terminal Block Section with Flat Terminal. Screws are #8-32 x 1⁄2 inch, for Ring or Spade Lugs. 15⁄32 inch wide maximum. Wire #10–#22 AWG

KCB1fa 2.90 50

Terminal Block Section with tin plated terminals for use with aluminum wire. Screws are #8-32 x 1⁄4 inch, for Ring or Spade Lugs, 15⁄32 inch wide maximum. Wire #10–#22 AWG

KCBT1a 3.60 50

Terminal Block Section with Solderless Box Lug. Wire #8–#18 AWG

KCA1 fa 3.60 50

Terminal Block Section with Solderless Box Lug. Wire #4–#14 AWG

KD1fa 6.90 50

Terminal Block Section with Slip-on connectors with both sides of block. Wire #14–18 AWGe

KCS1a 4.80 50

Terminal Block Section with Slip-on connector on one side of block and pressure wire connector on the other Wire #8–#18 AWGe

KCPS1a 6.20 50

Fusible Terminal Block Section with Pressure Wire Connector. Wire #8–#18 AWG

KH1a 13.20 d 50

Fusible Terminal Block Single Circuit

Pressure Wire ConnectorsWire #10–#18 AWG

Accepts Class H or K30 Ampere 250 V Fuse

Accepts Class R30 Ampere 250 V Fuse

Type Price Type Price

PF1g $20.30 PFR1g $20.30

Assembly Kits And Components

Description Type PriceEach

Std.Pack b

K1 $17.10 1

KH2c 5.30 1

White marking strip—50" Length MS6 2.70 5

Adhesive backed marking strip sheet— 20 strips—11" Length MS1 5.70 1

End Clamp Assembly KH20 3.80 100

Barrier KH21 2.30 50

Barrier (For KH1) KH22 3.30 50

Guide Blocksa KH24 .60 100

Nylon Plug (Holds in Marking Strip) KH25 .60 100

End Plug for Type KH1 KH26 1.80 50

Accessories

Jumpers for Use withType KCA1 Blocks

No. ofCkts. Type Price

Each

Std.PackQty. b

2 JCA2 $ .98 100

6 JCA6 1.80 50

Mounting Track

Select the appropriate length of 9080GH1** track from page 22-6

Assembly Kit—Includes:

2—NylonPlugsKH-25

2—GuideBlocksaKH-24

1—Barrier KH-21

2—End Clamps KH-20

1–24 CircuitMarkingStrip h

Kit Includes:

1—MarkerStrip End Plug

KH-261—Barrier

KH-22

How to Order:


• Class Number Class Type

22-2

• Type Number 9080 KC1


ved/05 0
All Rights Reser9/16

9/16/05


Cable EndsDZ5 and AZ5www.SquareD.com


Conform to NF C 63-023 StandardMark and terminate wires simultaneouslyStrip the wire,insert it into the cable endand crimp it. Up to 7 markers can be used.

22T

ER

MIN

AL B

LO

CK

S

B

A

C D

DZ5CE005

22

B

A

C D

DZ5CA007

C

A

D

D

4.5B

2

DZ5CA042

B E

A

C D

AZ5DE010

a BOLD FACED catalog numbers are stocked in the United States.b These catalog numbers are UL Component Recognized (File E120159) provided the AT1PA crimping tool is used to crimp the cable end.c CE Marked.d Order must specify standard pack quantities or multiples of that quantity.e Will accept an AR1 SC03 cable marker from page 22-22.

Without Marking Flag

Wire Size Sleevecolor

Dimensions (mm) Catalog Numberac

Price Each Std. Pack dAWG Dia. (mm2) “A” “B” “C” “D”

26 0.25 Yellow11 6.2

1.2 2.2

DZ5CE002L6

$0.08

1000

13 8.2 DZ5CE002

24 0.34 Green11 6.2 DZ5CE003L6

13 8.2 DZ5CE003

22 0.50 White

11 6.2

1.4 3

DZ5CE005L6b 0.09

13 8.2 DZ5CE005b

16.8 12 DZ5CE005L12 0.13

20 0.75 Blue11 6.2

1.6 3.1DZ5CE007L6b

0.0913 8.2 DZ5CE007b

18 1.00 Red

11.5 6.2

1.8 3.4

DZ5CE010L6b

13.5 8.2 DZ5CE010b

16.8 12 DZ5CE010L12 0.14

16 1.50 Black

11.5 6.2

2.1 4

DZ5CE015L6b 0.11

13.5 8.2 DZ5CE015b

22.8 17.7 DZ5CE0153b 0.21

14 2.00 Yellow 14.5 8.2 2.35 4.2 DZ5CE020 0.12

14 2.50 Grey14.5 8.2

2.7 4.6DZ5CE025b

24 17.7 DZ5CE0253b 0.22

12 4.00 Orange17.3 9.8

3.3 5.5DZ5CE042b 0.21

25.5 17.5 DZ5CE043b 0.31

10 6.00 Green20 11.5

3.95 7DZ5CE062 0.24

10026 17.5 DZ5CE063 0.33

With Marking Flag

26 0.25 Yellow

13

8.2

1.2 2.2DZ5CA002

$0.13

1000

24 0.34 Green DZ5CA003

22 0.50 White 1.4 3 DZ5CA005b

20 0.75 Blue 1.6 3.1 DZ5CA007b

0.1618 1.00 Red

13.51.8 3.4 DZ5CA010b

16 1.50 Black 2.1 4 DZ5CA015b

14 2.50 Grey 14.5 2.7 4.6 DZ5CA025b

Marking Flag Optional e

12 4.00 Orange19.5 11.5 3.3 5.5 DZ5CA042b $0.19

100025.5 17.5 3.3 5.5 DZ5CA043b 0.23

10 6.00 Green20 11.5 3.95 7 DZ5CA062 0.31

100

26 17.5 3.95 7 DZ5CA063 0.32

8 10.00 Brown21.5 12 4.95 8.4 DZ5CA102 0.36

27 17.5 4.95 8.4 DZ5CA103 0.39

6 16.00 White23.5 12 6.35 9.8 DZ5CA162 0.43

29 17.5 6.35 9.8 DZ5CA163 0.48

4 25.00 Black 30 17.5 8.15 12 DZ5CA253 0.53

2 35.00 Red30 16 9 13.5 DZ5CA352 0.65

2039 25 9 13.5 DZ5CA353 0.77

0 50.00 Blue36 20 11 15.7 DZ5CA502 0.77

41 25 11 15.7 DZ5CA503 0.87

Dual Wire Cable Ends

“A” “B” “C” “D” “E”

22 0.50 White13

8

1.4 2.5 4.7 AZ5DE005

$0.12500

20 0.75 Blue 1.6 2.8 5.0 AZ5DE007

18 1.00 Red13.5

1.8 3.4 5.4 AZ5DE010

16 1.50 Black 2.1 3.6 6.6 AZ5DE015 0.13

14 2.50 Grey 24 10 2.7 4.2 7.8 AZ5DE025 0.16 250

For additional information, reference Catalog # 9080CT9701.

22-21© 2004 Schneider Electric All Rights Reserved9/22/04

I DiscountSchedule

9/22/04

www.SquareD.comCable EndsAR1 and AT1

22-2

22T

ER

MIN

AL B

LO

CK

S

AR1SC01

AR1SC02

AR1SC03

AR1MA019


a Order must specify standard pack quantities or multiples of that quantity.b Complete the catalog number by adding the number or letter desired.

Examples: AR1 MA015 is a card of 200 yellow markers with a black 5 marked on them.AR1 MB01T is a card of 200 yellow markers with a black T marked on them.

Cable End Markers & Accessories

Type CatalogNumber

PriceEach

Std. Pack a

Adjustable collar type marker holder for #14 to #2 wire AR1SC01 $ 0.21

100Clip-on marker holder for #18 to #16 wire (7 markers max.) AR1SC02 0.21

Cable end marker tags for DZ5CA042 to DZ5CA253 AR1SC03 0.06

Card of 200 yellow markers with black numeral 0 thru 9 AR1MA01b 6.10

1

Card of 200 yellow markers with black letters A thru Z AR1MB01 b 6.10

Card of 200 black markers with a white 0 marked on them AR1MC010 6.80

Card of 200 brown markers with a white 1 marked on them AR1MC011 6.80

Card of 200 red markers with a black 2 marked on them AR1MC012 6.80

Card of 200 orange markers with a black 3 marked on them AR1MC013 6.80

Card of 200 yellow markers with a black 4 marked on them AR1MC014 6.80

Card of 200 green markers with a black 5 marked on them AR1MC015 6.80

Card of 200 blue markers with a black 6 marked on them AR1MC016 6.80

Card of 200 violet markers with a black 7 marked on them AR1MC017 6.80

Card of 200 gray markers with a black 8 marked on them AR1MC018 6.80

Card of 200 white markers with a black 9 marked on them AR1MC019 6.80

Card of 200 blank yellow markers AR1MA0196 6.10

Card of 200 blank green markers AR1MA0197 6.10

Card of 200 yellow markers with a black + marked on them AR1MA0198 6.10

Card of 200 yellow markers with a black—marked on them AR1MA0199 6.10

Complete set of numeral markers 0 thru 9, plus one card each of the “+” “-”, yellow blanks, and green blanks/one AT1PA1 positioning tool. AR1MA01 68.00

Complete set of letter markers A thru Z, plus one card each of the “+” “-”, yellow blanks, and green blanks/one AT1PA1 positioning tool. AR1MB01 150.00

Cable End Tools

Description CatalogNumber Price

Cable end marker positioning tool AT1PA1 $ 15.10

Automatic stripping and cutting tool for 0.8 mm to 4 mm cable, adjustable stripping length

AT1PA7 253.00

Crimping tool for cable ends 0.5 mm2 to 16 mm2 AT1PA2 123.00

Crimping tool for cable ends 10 mm2 to 35 mm2 AT1PA4 134.00

Organizing case for cable ends—holds stripping tool and cable ends (not supplied) AT1HB2 58.00

AT1PA1

AT1PA4

AT1PA2 AT1HB2



ved/03
2
All Rights Reser9/8

9/8/03

I DiscountSchedule

terminal blocks - datasheet.octopart.com · for use with square d class 8501 type x, k, ... for...

Documents