teseo-suite - stmicroelectronics · set the gnss device name: evb-t3 enable add control port set...
TRANSCRIPT
![Page 1: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/1.jpg)
Teseo-SuitePC tool to manage, configure and evaluate
the Teseo GNSS family
Quick Training Guide
v. 1.0
![Page 2: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/2.jpg)
Quick Start Guide - Contents 2
Introduction
Basic commands
Advanced features
Documents & related resources
1
4
3
2
![Page 3: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/3.jpg)
Quick Start Guide - Introduction 3
Introduction1
2
3
4
Basic commands
Advanced features
Documents & related resources
![Page 4: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/4.jpg)
Install Teseo Suite
Download and install the Teseo
Suite version selected
4
Teseo-Suite is a powerful PC Tool able to manage the ST
Teseo II and Teseo III GNSS solutions.
Teseo Suite has two flavors:
• Light available on
www.st.com (with limited
features)
• Pro on request @
st-teseo-suite-support
![Page 5: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/5.jpg)
Install VCP Driver
ST’s Teseo II and Teseo III GNSS solutions can be connected to
a PC using the USB port through the USB-To-UART bridge
• You need to install the ST Teseo II and ST Teseo III VCP
Driver. It can be downloaded here:
• SiliconLabs www.silabs.com
or
• FTDIChip www.fdtichip.com
5
![Page 6: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/6.jpg)
Start application
On application start-up the Configuration Session panel is shown
Push ‘Add Device’ button to add a new entry
6
1
1
2
2
![Page 7: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/7.jpg)
Configuration Device 7
1
21
23
3
44
55
6 6
Set the Hardware type: STA8090
Set the GNSS Device Name: EVB-T3
Enable Add Control Port
Set the Protocol: NMEA
Set the Port Name: according to the
discovered on the PC
Configure the port as following table:
Click-on the Ok button
Baud rate Data Bits Stop Bits Parity Handshake
115200 bps 8 Bits 1 Bit none none
7
7
![Page 8: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/8.jpg)
Connect the device
In the Configuration Session panel a new entry (row) is shown
Enable Connect Ctrl port
Click-on the Connect all button
8
1
2
12
3
3
![Page 9: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/9.jpg)
Inspect Device 9
2
2
3
3
Click-on View Monitor button in the menu-bar
NMEA Decoding panel is shown
NMEA Stream can be viewed and inspected
1
1
![Page 10: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/10.jpg)
Disconnect the device
In the Configuration Session panel entry (row)
Click-on the Disconnect button
10
1
2
21
![Page 11: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/11.jpg)
Quick Start Guide - Contents 11
Basic commands
1
2
3
4 Documents & related resources
Advanced features
Introduction
![Page 12: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/12.jpg)
Basic commands - Contents 12
1
2
3
4
Send Commands
Map View
Signal Level
Filter the message list
5
6
Recod a NMEA Log
Play a NMEA Log
![Page 13: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/13.jpg)
Send commands 13
2
3
2 3
4
4
1 In the ‘Nmea Decoding’ panel
Write the ‘command’ in the text-edit entry
Click-on the ‘Send’ button to raise the command to the device
Inspect the replay message in the NMEA Stream
1
![Page 14: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/14.jpg)
Filter the message list 14
1 In the ‘Nmea Decoding’ panel
Select the messages you want
Refresh the new message-list into the device
1
2
2
3
3
![Page 15: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/15.jpg)
Map view 15
1 Click-on ‘Map View’ button in the menu
Inspect the position in the ‘Map View’ panel2
2
1
![Page 16: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/16.jpg)
Signal Levels 16
1 Click-on ‘Signal Level View’ button in the menu
The ‘Signal level’ panel reports all the details for all the seen satellites
1
2
2
![Page 17: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/17.jpg)
Record a NMEA Log session 17
1 To start log session, click-on ‘Start/Stop Record Control Port’ button
in the menu (button turns red)
2 To stop a log session, click-on ‘Start/Stop Record Control Port’ button
in the menu (button turns white)
1
2
![Page 18: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/18.jpg)
Play a NMEA Log session [1/4] 18
1 Click-on ‘Player’ button in the menu (the Logfile Toolbar panel will appear)
Click-on ‘Play’ button in the Logfile Toolbar (the ‘Open’ dialog will appear)2
1
2
![Page 19: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/19.jpg)
Play a NMEA Log session [2/4] 19
1 In the ‘Open’ dialog select the log to play
Click-on ‘Open’2
1
2
![Page 20: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/20.jpg)
Play a NMEA Log session [3/4] 20
2
3
2
3
1
1 In the ‘Select the NMEA payload’ folder based on the GNSS IC used
In the ‘ConfigPayloadNMEA.xml’ file
Push ‘Open’
![Page 21: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/21.jpg)
Play a NMEA Log session [4/4] 21
1 In the Logfile Toolbar panel all the buttons are enabled and you can
start, stop, rewind the log as a standard tape
1
![Page 22: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/22.jpg)
Quick Start Guide - Contents 22
Advanced Features
Introduction
Basic commands
Documents & related resources
1
3
2
4
![Page 23: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/23.jpg)
Advanced features - Contents 23
Update Boot and GNSSLib1
Update GNSSLib only 2
Firmware configuration3
![Page 24: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/24.jpg)
Update Bootloader and GNSSLib 24Teseo Suite Pro
ONLY
1
1 Open Teseo II (T2) or Teseo III (T3) X-Loader from menu
2 Select the binary file from file-system
2
3 Select COM Port and the baud-rate
3
4 Click-on Start to update
4
![Page 25: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/25.jpg)
Update GNSS-Lib 25
1
1 Open Firmware Upgrade tool
2 Select the binary file from file-system
2
3 Select COM Port and the baud-rates
3
4 Click-on Start to update the GNSS-Lib
4
![Page 26: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/26.jpg)
Firmware configuration [1/2] 26
1
1 Select ‘FW Configuration panel’ in the menu
Select the target to be configured (Connected device in the example)
Click-on Ok
2
2
3
3
Teseo Suite Pro
ONLY
![Page 27: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/27.jpg)
Firmware configuration [2/2] 27
1
1 Expand the CDB-ID number under configuration
2 Select the specified field under configuration
2
3 Enable the field and/or set the right value (Galileo constellation is enabled
in the example)
4
3
4 Apply the change to the device
Teseo Suite Pro
ONLY
![Page 28: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/28.jpg)
Quick Start Guide - Contents 28
Documents & related resources
Introduction1
Basic commands2
Advanced features3
4
![Page 29: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/29.jpg)
Documents & related resources
• Teseo II: Webpage
• Data-sheet of all PNs;
• Teseo III: Webpage
• Data-sheet of all PNs;
• Teseo Suite: Webpage• Datasheet
• Install program
29
11/24/2017
All documents are available on:
www.st.com
![Page 30: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/30.jpg)
Teseo Suite – Extra features
Push Help menu to access User-Manual
User-Manual reports all information needed
30
1
2
1
2
![Page 31: Teseo-Suite - STMicroelectronics · Set the GNSS Device Name: EVB-T3 Enable Add Control Port Set the Protocol: NMEA Set the Port Name: according to the discovered on the PC Configure](https://reader033.vdocuments.net/reader033/viewer/2022053019/5f240e233eecd375b6306409/html5/thumbnails/31.jpg)
Enjoy GNSS solution development
with Teseo-Suite
Now you can develop your GNSS solution with ST Teseo II, ST Teseo
III and ST Teseo Module, using Teseo-Suite to explore all the
available features
31