test report issued under the responsibility of · appended to a cb test certificate issued by an...
TRANSCRIPT
SZUTEST TECHNICAL INSPECTION and CERTIFICATION
inönü Mah. Cad. No:148 Kat 3-4
1 of 3
TEST REPORTNo. 11-0504/01
of
list:
ER-03
EI San. Ltd.1201/1 NO.S3
EI San. Ltd.1201/1 NO.S3
CENGiZ
2011-05-12
2x SZUTEST
1x
Without of SZUTEST is to of any of thisas a only.
and to only.of this (*) of to ENISOIIEC17025.
of this (**) of(no in of EN ISOIIEC 17025).
SZUTEST TECHNICAL INSPECTION and GERTIFICATION
Yolu Mavi No: 10 K:4 34752
No: 11-0504/011T3
to : EN 60335-1 :2002 10.1
/ /
1500/2011-P2
Examination METIN
of 2011-05-12
of ofvaliditv nt
CE MI 15124683 E 6102101 10.20072094K 300400 E 6102086 10.2007
(*): EN 60335-1 :2002 Input and
If an is with input atshall not input by
than +%20If an is with at
shall not by than +15 %
is
to
of/ (W)
1 232/49.99 1672 / 15002 232/49.98 1672 /15003 232/49.99 1672/1500
Status: was not
of It was not
CENGiZ
Test Report issued under the responsibility of:
AB-0823-T
201400017TUR-001
16.12.2014
TEST REPORT IEC 60335-2-45
Safety of household and similar electrical appliances Part 2: Particular requirements for portable heating tools
Report Number. .............................. : 201400017TUR-001
Date of issue ................................... : 16.12.2014
Total number of pages .................... 130
............................ : Eral K ve El Aletleri San. Tic. L
Address ........................................... : ürkiye
Test specification:
Standard .......................................... : IEC 60335-2-45:2002 (Third edition) + A1:2008 + A2: 2011 used in conjunction with IEC 60335-1:2010 (Fifth Edition) (including corrigendum 1:2010)
Test procedure ............................... : LVD Test Report
Non-standard test ..: N/A
Test Report Form No. ..................... : IEC60335_2_45H
Test Report Form(s) Originator..... : LCIE
Master TRF ...................................... : Dated 2012-08
Copyright © 2012 Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Test item description ..................... : Plastic Pipe Welding Machine
Trade Mark ...................................... : eral
Manufacturer ................................... : ve El Aletleri San. Tic. L
Model/Type reference .................... : ER-01, ER-02, ER-03, ER-04
Ratings ............................................ : 220-240~, 50/