the beauty of surface cleaning takes shape herestrict manufacturing guidelines of iso 9001:2008, iso...
TRANSCRIPT
www.tbshot.com.tw
Shot Blasting_1
THE BEAUTY OF SURFACECLEANING TAKES SHAPE HERE
THE BEAUTY OF SURFACECLEANING TAKES SHAPE HERE
Taiwanabrator, the leading manufacturer, supplier and exporter of steel abrasive media, produces a wide range of metal abrasive products that surpasses the industry standards. With over 40 years of experience in the industry, we stand as the primary steel abrasive product provider in Taiwan and throughout Asia.
We offer quality products and services to meet the specifications of our valued customers in a timely manner. While we follow the strict manufacturing guidelines of ISO 9001:2008, ISO 11124-3, and SAE J827, J444, J1993, our quality management systems have been assessed and registered as meeting of ISO 9001 since 1997.
Shot Blasting_2
www.tbshot.com.tw
Sieve(inch)
Sieve(mm)Mesh No.
Shot Size Distribution (as per SAE J-827)
80% min90% min
97% min
85% min
85% min
85% min
85% min
85% min
85% min
85% min
85% min
7
8
10
12
14
16
18
20
25
30
35
40
45
50
80
120
2.800
2.360
2.000
1.700
1.400
1.180
1.000
0.850
0.710
0.600
0.500
0.425
0.355
0.300
0.180
0.125
0.1110
0.0937
0.0787
0.0661
0.0555
0.0469
0.0394
0.0331
0.0280
0.0232
0.0197
0.0165
0.0138
0.0117
0.0070
0.0049
S-460
All Pass
5% max
96% min
S-550
All Pass
97% min
S-660
All Pass
97% min
S-780
All Pass
97% min
S-330
All Pass
5% max
96% min
S-280
All Pass
5% max
96% min
S-230
All Pass
10% max
97% min
S-170
All Pass
10% max
85% min
S-390
All Pass
5% max
96% min
S-110
All Pass
10% max
80% min
S-70
All Pass
10% max
90% min
Shot PeeningSteel shots are used in shot peening, which is the process of enhancing the fatigue life of products (such as turbines, springs, gears, torsion bars, shafts, stabilizers, con-rods) that are affected by various stresses in use.Surface PreparationSteel shots can be used to prepare the surface by roughening it up to give a good key in support of coatings, such as powder coating, enamelling, painting, metallisation, rubber bonding and more.Sand RemovalSteel shots can be used in cleaning of castings.Scale RemovalSteel shots can also be used to clean ferrous or non ferrous alloys or products (pipes, plates etc.) that are made from forging, die-forging, stamping, drawing and rolling or after heat treatment.Shot blasting of cast steelSteel shots can be used on the blasting of profile steel,ship board,steel board and other steel material
ApplicationSteel shots are used for a variety of purposes. Following are some of the utilities of steel shots.
Before After
AfterBefore
Shot Blasting_3
Established back in 1977, Taiwanabrator is the most sought- after steel abrasive manufacturer and supplier. Situated in Taiwan, we are affiliated with Japan Sintokogio Ltd which has assisted us with the advanced technology we utilize in our manufacturing proce-dures. While we supply metal abrasive media throughout Taiwan, we also export among the wide range of steel abrasive products we specialize in manufacturing, steel grits are one of them.
Steel grits are made by crushing steel shots to angular particles which are subsequently tempered to various hardness catering to different applications, screened by size according to SAE standard specifications. We also provide various hardness range as speci-fied by customer’s requirements.
Sieve(inch)
Sieve(mm)Mesh No.
Grit Size Distribution (as per SAE J-827)
www.tbshot.com.tw
G-16
All Pass
85% min
G-14
All Pass
90% min
G-12
All Pass
90% min
G-10
All Pass
80% min
90% min
2.800
2.360
2.000
1.700
1.400
1.180
1.000
0.850
0.710
0.600
0.500
0.425
0.355
0.300
0.180
0.125
0.075
0.1110
0.0937
0.0787
0.0661
0.0555
0.0469
0.0394
0.0331
0.0280
0.0232
0.0197
0.0165
0.0138
0.0117
0.0070
0.0049
0.0029
G-120
All Pass
70% min
75% min
75% min
75% min
65% min
60% min
80% min
80% min
G-25
All Pass
80% min
G-40
All Pass
70% min
80% min
G-50
All Pass
65% min
75% min
G-18
All Pass
85% min
G-80
All Pass
75% min
7
8
10
12
14
16
18
20
25
30
35
40
45
50
80
120
200
ApplicationSTEEL shots can be used for a variety of cleaning purposes. In addition, they can also be used for;
Flashing RemovalPipe CoatingBridge BlastingEpoxy Coating PreparationRail Car ReconditioningShip BuildingRust RemovalAggressive CleaningForgingsNon Ferrous CastingsPlate PreparationScale RemovalSurface Preparation
Before After
Before After
Before After
Before After
Good quality abrasive media should have:
www.tbshot.com.tw
Taiwanabrator Co., Ltd.No. 586, Sec. 2, ZhongShan S. Rd., Dayuan Dist., Taoyuan 337, Taiwan (R.O.C.)Main Products: Steel Shots & Grits for Blasting Cleaning, Steel Grits for Granite CuttingTel: 886 3381 3812 Fax: 886 3381 [email protected]
Bad Compositionshots will crack easily.
Bad Compositionshots will be deformed easily
Good Compositionshots WON`T crack and
be deformed easily.
Shot Blasting_4
Proper "HARDNESS"High efficiency on surface cleaning.Proper "HARDNESS"High efficiency on surface cleaning.
Excellent "Bouncing"Perfect shot blasting on the target piece.Excellent "Bouncing"Perfect shot blasting on the target piece.
Proper "Composition"High durability without cracksProper "Composition"High durability without cracks
Bad shape of steel shots result in bad bouncing performance
Good shape of steel shots result in good bouncing performance
SHOTS
H Shots
L Shots
S Shots
HrC
63+
51-60
40-50
GRITS
H Grits
L Grits
P Grits
HrC
63+
51-60
40-50