PGS Introduction

"Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio).

"Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs.

"Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers.

"Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling.

"Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX).

Design C

onceptAerocool is proud to announce our first compact case (Model : Qs-200) under the PGS-Q series (Compact series – Blue Label).

Qs-200 is one of the best “Mini-Tower” case in the market today if not the BEST Mini-tower case. This compact case is not only elegantly designed and solidly constructed; it also provides high versatility, expandability, transportability, protection and performance.

The Qs-200 is designed with “User-Friendly” concept in mind and it also gives gamers high versatility and protection for their Hard Drives. Its “Screw-less” chassis, pre-installed cable management clips and removable HDD bracket made this chassis an easy install. The chassis can support 2 x 3 1/2” HDDs or 3 x 2 1/2” HDDs. These Hard Drives are also well protected from shock with the “anti-vibration” rubbers.

The Qs-200 case also delivers optimal air flow and supports Longer High-End VGA cards up to 340mm. It is the only Mini-tower case in the market which can support 5 x 12cm fans (2 x12cm fans in front, 1 x 12cm fan in the rear and 2 x 12cm fan on the side panel). Its “Mesh” front panel also helps to maximize air-intake.

Gallery

Front Back

Side

Photos are for exterior

reference only. Not all fans

are inclusive.

Please see specification

page.

Features- High performance "Mini -Tower" for gamers and enthusiast

- Solidly constructed chassis - 0.6mm SECC Japanese Steel

- High-end Graphic card Support - Supports longer high-end VGA cards up to 340mm

- High versatility - Supports 2 x 3 1/2" HDDs or 3 x 2 1/2" HDDs

- HDD Protection - Includes anti-vibration rubber to protect your HDDs from shock.

- Ease of Installation - The combination of Screw-less 5 1/4” bays, 3 1/2” bay and PCI Slot PLUS a Removable HDD plate make this chassis an easy install.

- Easy Access front I/O ports - 3 x USBs, Audio/Mic and E-Sata ports

- Smart Cable Management - “cable management clips” are pre-installed inside the chassis to minimize your cable mess and improve the system airflow

- Dust Protection - Includes front "Dust Filter" to prevent dust entering your computer

Specifications

Spec

Cooling System

Case Type MaterialMotherboardsChassis DimensionsDrive BaysExpansion SlotsMax length space available for PCI slotsI / O Ports

Fan Rated voltage Starting voltage Power consumption Rated currentSpeedAir Flow (CFM)Air pressureNoise (dBA)Bearing

::::::::

::::::::::

Mini Tower SECC 0.6mm Mini - ITX / Micro ATX 367(H) x 185(W) x 395(D)2 x 5.25" (External)  / 1 x 3.5" (External)  / 2x3.5” HDDs or 3x2.5” HDDs 4 Slots 340 mm 3 x USB2.0 / 1 x E-SATA / Mic & headphone (AC97 & HD audio)

120 x 120 x 25mm12V ≤ 9V(Power ON/OFF) 2.64W 0.22A1500 RPM +- 10%58.35 CFM (Max)2.1mm H2O 26.67 dB-ASleeve

120 x 120 x 25mm12V ≤ 9V(Power ON/OFF) 2.64W 0.22A1500 RPM +- 10%58.35 CFM (Max)2.1mm H2O 26.67 dB-ASleeve

Front Rear

Air Flow

Superb Airflow - install up to

5 x 12cm fans !!!

1. Front - 2 x 12cm fan (1 x 12cm Blue LED fan included)

2. Back - 1 x 12cm fan (1 x 12cm Blue LED fan included)

3. Side - 2 x 12cm fan (optional)

Inside-1

Sufficient depth for hi-endVGA cards up to 340mm

Tool-Free for PCI slots

Cable clips to reduce cable mess

Can install up to 2x12cm fans

Tool-free for 5.25” bays

HDD installation option 3:2.5” x 2 or 2.5” x 3

HDD installation option 2:3.5” x 1 and 2.5” x 1

HDD installation option 1:3.5” x 2

Removable HDD rack can be laid flat for ease of installation

Design C

oncept