the finest - uploads-ssl.webflow.com
TRANSCRIPT
TABLE OF CONTENTS
400 Division St. NorthRice, MN 56367
800-328-7867 | Ferche.com
Ferche Also Manufactures:
THE FINEST HARDWOOD MOULDINGS& Veneered Millwork
200 Series : Baseboardbaseboardsbase shoe, base capsveneered basecorner/plinth blocks
100 Series : Casing 2-7
8-13
14-16
16-19
20-22
23
24-32
33-38
38
39-44
bevel casing & flat casingv.i.p. casing & b.i.b.b. casingbrick mould, backband
300 Series : Door Componentsdoor stop, astragals veneered & solid door jambs
20 minute fire-rated door frames20 minute sidelight/borrowed light frame 45, 60 & 90 minute fire-rated door frames
400 Series : Boardss4s & veneered boardscabinet parts, bar railsez beam (ceiling beam system)
500 Series : Miscelleny mull center, screen, stool, picture frame/hanger
600 Series : CRows/Coves/Cornerscoves, bed mouldscrownscrowns with dentil moulddentil mouldinside & outside corner, quarter round
700 Series : Panel & Chair Mouldingspanel mouldingchair railtongue & groove panelingmantel mouldings
800 Series : Sills & Thresholdsthresholds
900 Series : Stair Parts & Railingshandrails, balustersfull rounds, half roundssafety railsstair partsveneered skirt boards
the finest architectural and commercial Wood door frames
Fire-Rated Wood Door Frames in 20, 45, 60 and 90 minute ratings
Book of Profile Line Drawings2
Bevel Casing
F110 - 9/16” x 2 1/4”
F110
F111 - 9/16” x 2 1/4”
F111
F107 - 9/16” x 2 1/4”
F107
F113 - 1/2” x 2 1/4”
F113
F115 - 1/2” x 2 1/4”
F115
F118 - 1/2” x 2 1/4”
F118
F104 - 11/16” x 2 1/4”
F104
F119 - 1/2” x 1 5/8”
F119
F100 - 9/16” x 2 1/4”
F100
F106 - 3/4” x 2 1/4”
F106
F120 - 3/4” x 2 1/2”
F120
F114 - 1/2” x 2”
F114
F118
more INFO at ferche.com 3
Bevel Casing
F136 - 1/2” x 3 1/4”
F136
F140
F140 - 1” x 4 1/2”
F132 - 11/16” x 3 1/4”
F132
F131 - 11/16” x 3 1/4”
F131
F121 - 5/8’ x 2 1/2”
F121
F126 - 11/16” x 2 1/2”
F126
F130 - 11/16” x 3 1/2”
F130
F134
F134 - 9/16” x 3 1/4”
Book of Profile Line Drawings4
Bevel Casing
F1410 - 5/8” x 3 1/2”
F1412 - 3/4” x 3 1/4”
F1420 - 3/4” x 3 1/4”
F1422 - 3/4 x 3 1/2”
F1432 - 3/4” x 4”
F1430 - 3/4” x 3 1/4”
F1450 - 1 1/16” x 4 1/2”
F1442 - 3/4” x 3 1/2””
F1410
F1412
F1420
F1422
F1430
F1432
F1442
F1450
more INFO at ferche.com 5
Casing
F1514 - 11/16” x 3 1/4”
F1624 - 11/16” x 3 1/4”
F1654 - 11/16” x 3 1/4”
F1644 - 11/16” x 3 1/4”
F1614 - 11/16” x 3 1/4”
F1634 - 9/16” x 3 1/4”
F1636 casing cap - 1/4” x 11/16”
F1624
F1644
F1654
F1634
F163
6
F1514
F1614
Book of Profile Line Drawings6
F178 - 9/16” x 2 3/8”
V.I.P. Casing
F161 - 11/16” x 3 1/4”
F161
F160 - 11/16” x 3 1/4”
F160
F178
F1611
F1613
F162 - 11/16” x 5 1/2”
F162
F163 - 11/16” x 3 1/4”
F163
F169 - 11/16” x 3 1/4”
F169
F169A
F169A - 3/8” x 1 1/2” F169B - 3/8” x 1 1/2”
F169B
F174 - 9/16” x 2 3/8”
F174
B.I.B.B. Casing
F1611 - 1/2” x 2 1/4”
F1613 - 9/16” x 3 1/4”
*ALSO available: F1616 - 11/16” x 3 1/4”
more INFO at ferche.com 7
Flat Casing/Hook Strip
F153 - 11/16” x 3 1/4”
F153
Profile # Dimensions
F156 7/16” x 2-1/4”
F1561 7/16” x 2-1/2”
F1562 7/16” x 3”
F1563 7/16” x 3-1/4”
F1564 7/16” x 3-1/2”
F1541 1/2” x 2-1/4”
F1542 1/2” x 2-1/2”
F1543 1/2” x 3”
Profile # Dimensions
F1544 1/2” x 3-1/4”
F1545 1/2” x 3-1/2”
F157 9/16” x 2-1/4”
F154 9/16” x 2-1/2”
F1572 9/16” x 3”
F1573 9/16” x 3-1/4”
F1574 9/16” x 3-1/2”
F158 11/16” x 2-1/4”
Profile # Dimensions
F159 11/16” x 2-1/2”
F1582 11/16” x 3”
F153 11/16” x 3-1/4”
F1584 11/16” x 3-1/2”
F1585 11/16” x 4”
F1586 11/16” x 4-1/2”
F1587 11/16” x 5-1/2”
F1588 11/16” x 7-1/4”
Flat Casing/No Eased Edges
F1814 3/8” x 3 1/4”F1815 1/2” x 3 1/4”
Brick Mould/BackBands
F170 - 1 1/16” x 2”
F170
F171 - 1 1/4” x 2”
F171
F1911 3/4” x 1”
F1916 3/4” x 1 1/8”
F1910 3/4” x 3/4”
F1915 3/4” x 7/8”
1/2” (3/8)1/2” (3/8)
F197
3/4” x 1 3/16”
F197
3/4”
F196
F196
1 1/4” x 1 1/16”
3/4”
F194 - 3/4” x 1 1/16”
F194
3/4”
F195
11/16” x 1 1/16”
F195
3/4”
F1912
1” x 1 5/16”
F1932
1 1/8” x 1 1/2”
F1814 F1815
F1912 F1932
Book of Profile Line Drawings8
Baseboards
F217 - 3/8” x 3 1/4”
F217
F218 - 3/8” x 2 5/8”
F218
F205 - 3/8” x 2 5/8”
F205
F206 - 3/8 x 2 3/4”
F206
F219 - 3/8” x 2 3/4”
F219
F208 - 3/8” x 3 1/4”
F208
F216 - 3/8” x 3”
F216
F222 - 7/16” x 3 1/4”
F222
F232 - 1/2” x 3 1/4”
F232
F203 - 7/16” x 3”
F203
F204 - 7/16” x 3 1/4”
F204
F213 - 9/16 x 3 1/4”
F213
F202 - 7/16” x 2 3/4”
F202
F221 - 7/16” x 3”
F221
F220 - 7/16” x 2 3/4”
F220
F207
F207 - 3/8” x 3”
F2611
F2611 - 3/8” x 3 1/4”
more INFO at ferche.com 9
Baseboards
F2410 -
1/2” x 5 1/4”
F2412 -
5/8” x 7 1/4”
F2422 -
5/8” x 7 1/4”
F2420 -
1/2” x 5 1/4”
F2432 -
5/8” x 7 1/4”
F2430 -
1/2” x 5 1/4”
F2442 -
9/16” x 5 1/4”
Book of Profile Line Drawings10
Baseboards
F1634 - 9/16” x 3 1/4”
F2634 - 9/16” x 2 1/4”
F1636 casing cap - 1/4” x 11/16”
F2654 - 9/16” x 5 1/4”F2624 - 9/16” x 5 1/4”F2514 - 9/16” x 5 1/4”
F2614 - 9/16” x 5 1/4” F2644 - 9/16” x 5 1/4”
F1636
F2634
F1634
F1636
F2644
F2614F2514 F2624
F2654
more INFO at ferche.com 11
F2450 - 3/4” x 5 1/4”
*ALSO available: F2046 - 1/2” x 4 1/4”
F2100 - 1/2” x 3/4”
F2100
F200 - 7/16” x 3/4”
F200
Baseboards
F2800 - 9/16” x 5 1/4”
F2800
F261 - 5/8” x 5 1/4”
F261
F225 - 7/16” x 4 1/4”
F225
F726 - 1/2” x 3/4”
F726
F240A - 5/8” x 3/4”
F240A
F240B - 11/16” x 1 3/8”
F240B
Base capsBase Shoe
F238 - 7/16” x 3-1/4”
F238
Flat Base
Base - Eased 1 EdgeProfile # Dimensions
F2350 3/8” x 2-3/4”
F2351 3/8” x 3”
F2352 3/8” x 3-1/4”
F2353 3/8” x 4-1/4”
F236 7/16” x 2-3/4”
F237 7/16” x 3”
F238 7/16” x 3-1/4”
Profile # Dimensions
F2363 7/16” x 4-1/4”
F2364 7/16” x 5-1/4”
F2440 9/16” x 2-3/4”
F2431 9/16” x 3”
F2439 9/16” x 3-1/2”
F2433 9/16” x 4-1/4”
F2434 9/16” x 5-1/4”
Profile # Dimensions
F2532 11/16” x 3-1/2”
F2533 11/16” x 4-1/4”
F2534 11/16” x 5-1/4”
F2535 11/16” x 7-1/4”
F243 1/2” x 3-1/4”
F293 1/2” x 5-1/4”
F2450
Book of Profile Line Drawings12
Veneered Baseboard
F280 - 5/8” x 5 1/4”
F281 - 5/8” x 7 1/4”
F282 - 5/8” x 9 1/4”
MDF Core
F280
F281 (Special Order)
F282 (Special Order)
F272 - 7/16” x 2 3/4”
MDF Core F272 (Special Order)
F275 - 7/16” x 4 1/4”
MDF Core F275 (Special Order)
NOTES ON VENEERED BASEBOARDS:
There is a run minimum for all special order veneered base.
Developing Cutbacks will be sent with orders for veneered base.
Please call your account manager or the main line with any questions
prior to ordering or quoting.
NOTE: Caps on Veneered bases are fingerjointed solid material.
more INFO at ferche.com 13
Corner/Plinth Blocks
F166 - 1 1/16” x 3 1/2” x 8”(w/rosette)
F176 - 1” x 2 1/2” x 6”(w/rosette)
F166
F176
Not to scale
F172 - 1 1/16” x 6” x 6”(w/rosette)
F173 - 1 1/16” x 6” x 8”
F173R - 1 1/16” x 6” x 8”(w/rosette)
F173R
Not to scale
F167 - 1 1/16” x 3 1/2” x 8”
F167R - 1 1/16” x 3 1/2” x 8”(w/rosette)
F179 - 1 1/16” x 6” x 8”
F179R - 1 1/16” x 6” x 8”(w/rosette)
F167
F167R
F179
F179R
Not to scale
F172, F173 Not to scale
F165, F175 Section
Not to scale
F165 - 1 1/16” x 3 1/2” x 3 1/2”(w/rosette)
F175 - 1” x 2 1/2” x 2 1/2”(w/rosette)
F165
F175
Not to scale
All blocks have a subject to minimum orders and may incur set-up charges.
Book of Profile Line Drawings14
Door Stop
F312 - 3/8” x 1 1/16”
F312
F301 - 3/8” x 1 1/16”
F301
F303 - 7/16” x 1 3/8”
F303
F304 - 7/16” x 1 3/8”
F304
F306
F306 - 3/8” x 1 1/4”
F305 - 3/8” x 1 1/4”
F305
F313 - 11/16” x 1 5/8”
F313
F302 - 7/16” x 1 3/8”
F302
F300 - 7/16” x 1 3/8”
F300
F323
F323 - 1 1/4” x 2 3/8”
(For 1 3/4” Doors)
F324
F324 - 1 1/4” x 2 1/16”
(For 1 3/8” Doors)
F311
F311 - 7/16” x 1 5/8”
Astragals
F372 - 7/16” x 1 3/8”
F372
more INFO at ferche.com 15
Veneered Door Jambs
F330A - 11/16” x 4 9/16”
F330E - 11/16” x 4 13/16”
F330J - 11/16” x 5 1/4”
F330P - 11/16” x 6 9/16”
F330
High Density Particle Board
F346A - 11/16” x 4 9/16”
F346E - 11/16” x 4 13/16”
F346J - 11/16” x 5 1/4” F346
F335T - 11/16” x 7 1/2” - Trimmable Jamb
F335L - 11/16” x 5 1/2” - Trimmable Jamb
F335High Density Particle Board
3 7/8” (L), 5 1/4” (T)
F390A - 11/16” x 4 9/16”
F390E - 11/16” x 4 13/16”
F390J - 11/16” x 5 1/4”
F390
NOTE: Veneered door jambs are not designed to be used as window extension jambs.
F340
High Density Particle Board
F340A - 11/16” x 4 9/16”
F340E - 11/16” x 4 13/16”
F340J - 11/16” x 5 1/4”
Minimums apply. Please contact your account manager for more info.
Book of Profile Line Drawings16
Solid Rabbeted Jamb
Solid Flat Jamb
F365 A 1 3/16” x 4 9/16”
F365E 1 3/16” x 4 13/16”
F365K 1 3/16” x 5 3/8”
Rabbet 1/2” x 1 13/16” (w/o kerf)
1/2” x 2 1/8” (w/kerf)
* Available as non-rated t-stop frame.
ask your account manager for more information.
* Some solid door jamb configurations available
for sidelight/borrowed light. CAll for more info.
Solid Door Jambs
F381A - 11/16” x 4 9/16”
F381E - 11/16” x 4 13/16”
F381J - 11/16” x 5 1/4”
F381
* Also Available in double rabbet configuration.
ask your account manager for more information
** All Ferche Jambs are also available in square
edge upon Request. Minimums may apply..
20 Min. Solid Flat Jamb
F385 20 Min JambStop F353 - 3/4” x 1 1/2”Jamb F385 - 3/4” thickPlough - 5/32” x 3/4”
F385
F353
F385E 3/4” x 4 13/16”
F385J 3/4” x 5 1/4”
20 Min. Solid Rabbeted Jamb
F355E 1 1/4” x 4 13/16”
F355K 1 1/4” x 5 3/8”
Rabbet 9/16” x 2 1/8” (w/kerf)
20 Minute Solid Fire-Rated Frames
more INFO at fireratedwooddoorframes.com 17
20 Minute Veneered Fire-Rated Frames
F350T - 11/16” x 5 1/4” thru 7 1/2”
F350L - 11/16” x 3 7/8” thru 5 1/2”
2 1/4 3/4
5/32
1/2 1/2 1/21 1/2
5/83/4
Edge stripsto be a minimum of 3/16”
11/16"
F353
F350 High Density Particle Board Core
F350E - 11/16” x 4 13/16”
F350K - 11/16” x 5 3/8”
F353 - 3/4” x 1 1/2”
*ALso available as a trimmable jamb
1/4"
-3/32"
3/32"3/4"
1 1/4"
5/8" F352
F351 High Density Particle Board Core
F351E - 11/16” x 4 13/16” (jamb)
F351K - 11/16” x 5 3/8” (jamb)
F352 - 5/8” x 1 1/4” (stop)
Veneered Sidelight/Borrowed Light Window Frame
Glazing Clips spaced 12” apart
NOTE: Veneered door jambs are not designed to be used as window extension jambs.
20 Min. Veneered
Rabbeted Jamb Edge strips to bea minimum of 3/16”
9/16"
11/16"
Particle Board Core
Particle Board Core
F359 20 Minute 2 piece Rabbeted Frame
1/2” shoulder minimum
11/16"
F359 1 1/4” x 3 3/4”(min.)
** All Veneered products have a minimum order quantity and may incur set-up charges **
All technical inform
ation and specification details are available at ww
w.fireratedw
ooddoorframes.com
* Several solid and veneered configurations available for non-rated sidelight/borrowed light & transom frames. CAll for more info.
more INFO at fireratedwooddoorframes.com18
45/60/90 Minute Fire-Rated FramesFlat or Double Rabbet Configurations
high density fiberboard
high density fiberboard
high density fiberboard
intumescent
intumescent
F345 90 Minute Fire Rated Laminated Door Frame
F3911 5/8” x 1 1/2”
particle board coreintumescent
high density fiberboard
high density fiberboard
intumescent
F343 45 Minute Fire Rated Laminated Door Frame
F3911 5/8” x 1 1/2”
high density fiberboard
high density fiberboard
high density fiberboard
intumescent
intumescent
F344 60 Minute Fire Rated Door Frame
F3911 5/8” x 1 1/2”
NOTE: Veneered door jambs are not designed to be used as window extension jambs.
Ferche Fire-Rated Wood Door Frames are the industry’s best. All technical information and specification details are available at
www.fireratedwooddoorframes.com
All
tech
nica
l inf
orm
atio
n an
d sp
ecifi
cati
on d
etai
ls a
re
avai
labl
e at
ww
w.fi
rera
tedw
oodd
oorf
ram
es.c
om
more INFO at fireratedwooddoorframes.com 19
45/60/90 Minute FIre-Rated FramesSingle Rabbet Configurations
particle board coreintumescent
high density fiberboard
high density fiberboard
intumescent
F347 45 Minute Fire Rated Laminated Door Frame
LF3911 5/8” x variesSolid Wood
high density fiberboard
high density fiberboard
high density fiberboard
intumescent
intumescent
F348 60 Minute Fire Rated Door Frame
LF3911 5/8” x variesSolid Wood
high density fiberboard
high density fiberboard
high density fiberboard
intumescent
intumescent
F349 90 Minute Fire Rated Door Frame
LF3911 5/8” x variesSolid Wood
1“ thick GP Firestop Core
Solid wood edge strips, 1/8” - 1/4”thick.
Wood Veneer StopF3911 5/8” x 1 1/2”Stop
F3911 5/8” x 1 1/2”
Intumescent
F356 45 Minute Positive Pressure FrameF357 60 Minute Positive Pressure FrameF358 90 Minute Positive Pressure Frame
NOTE: Veneered door jambs are not designed to be used as window extension jambs.
All technical inform
ation and specification details are available at w
ww
.fireratedwooddoorfram
es.com
Book of Profile Line Drawings20
Solid S4S Boards
F400
F403
F402
F401
Veneered Boards
F420
3/4” x 5 1/2”
(Special Order)
F421
3/4” x 7 1/4”
(Special Order)
F422
3/4” x 9 1/4”
(Special Order)
F424
3/4” x 11 1/4”
(Special Order)
Particle Board Core
F400 for 3/4” thick
F401 for 1 1/16” thick
F402 for 1 1/4” thick
F403 for 1 1/2” thick
Widths up to 11 1/4”
F410
3/4” x 5 1/2”
(Special Order)
F412
3/4” x 7 1/4”
(Special Order)
F414
3/4” x 9 1/4”
(Special Order)
F416
3/4” x 11 1/4”
Matching Fingerjointed Core
NOTE: The veneered boards on this page are not designed to be used as window extension jambs.
NOTE: F410, F412, F414 & F416 are available with veneer on just 1 side upon request. Please specify when ordering.
SPECIAL ORDERS: There is a minimum quantity on special order boards. 18’ is the maximum length.
SPECIAL ORDERS: There is a minimum qunatity on special order boards. 18’ is the maximum length.
more INFO at ferche.com 21
Cabinet Parts/Bar Rail
F490 - 1 1/2 x 6 5/8”
F490
F492 - 1 1/4” x 5”
F492
F435 - 9/16” x 1 1/2”
F435
F440 - 3/8” x 1 1/2”
F440
F451 - 3/4” x 1 1/4”
F451
countertop
Lip Moulding
Bar Rail
Backsplash
Edgebands
F431 - 9/16 x 3 1/2”
F431
1-13/16
9/16
3/4
3/4
Book of Profile Line Drawings22
EZ BEam Ceiling Beam System
F471U - 3/4” x 7 1/4”
F471S - 3/4” x 5 1/2”
F471L - 3/4” x 3 1/2”
F472S - 3/4” x 5 1/2”
5 1/8” (3 1/8”)
F472L - 3/4” x 3 1/2”
more INFO at ferche.com 23
Mull Center
Screen Mould/Stool
Picture Frame/Hanger
F500I - 1/4” x 3 1/2”
F500J - 1/4” x 4”
F500K - 1/4” X 4 1/2”
F500L - 1/4” x 5”
F500N - 1/4” x 6”
F500A - 1/4” x 1 1/4”
F500B - 1/4” x 1 1/2”
F500C - 1/4” x 1 3/4”
F500D - 1/4” x 2”
F500F - 1/4” x 2 1/2”
F500H - 1/4” x 3”
F500
F551 - 3/4” x 2 1/2”
F551
F572 - 11/16” x 13/16”
F572
F575 - 3/4” x 1 1/16”
F575
F583 - 3/4” x 1 1/2”
F583
F586 - 3/4” x 2”
F586
F587 - 1 1/16” x 1 7/8”
F587
F595 - 11/16” x 1 3/4”
F595
F588 - 1 1/16” x 1 7/8”
F588
F553 - 3/4” x 2 3/8”
F553
F520 - 1/4” x 3/4”
F520
F521 - 1/4” x 3/4”
F521
Book of Profile Line Drawings24
Coves
Bed Moulds
F600 - 1/2” x 1/2”
F600
F601 - 3/4” x 3/4”
F601
F602 - 3/4” x 1 1/4”
F602
F604 - 9/16 “ x 1 3/4”
F604
F605 - 9/16” x 1 3/4”
F605
F606 - 9/16” x 2”
F606
F607 - 9/16” x 2 1/4”
F607
1-1
/4
1-1/4
D
rop
Proj.
1-1
/2
1-1/4
D
rop
Proj.
1-
7/16
15/16
D
rop
Proj.
1-
3/4
1-3/8
D
rop
Proj.
more INFO at ferche.com 25
Crowns
F618 - 3/4” x 3”
F618
F613 -
1 1/16” x 5 3/8”
F613
F612 - 3/4” x 4 9/16”
F612
3
-7/8
3-1/2
D
rop
Proj.
F641 -
1 1/16” x 7 1/4”
F641
5
-1/8
5-1/8
D
rop
Proj.
3-1
3/16
2-1/4
D
rop
Proj.
F611 - 3/4” x 3 5/8”
2
-1/2
2-1/2
D
rop
Proj.
F611
2
-3/8
1-5/8
D
rop
Proj.
Book of Profile Line Drawings26
Crowns
F640 - 1 1/16” x 7 1/4”
F640
F608 - 9/16” x 2 1/4”
F608
F610 - 11/16” x 3 7/16”
F610
F616 - 9/16” x 1 5/8”
F616
F615 - 9/16” x 2 5/8”
F615 2
1-5/8
D
rop
Proj.
5
5
D
rop
Proj.
2-
9/16
2-1/8
D
rop
Proj.
1-3
/4
1-3/8
D
rop
Proj.
1-
5/16
1 D
rop
Proj.
F614 - 11/16” x 4 1/4”
F614
3-1/
4
2-11/16
D
rop
Proj.
more INFO at ferche.com 27
F6410 - 3/4” x 4 1/4”
3
1/8
2 15/16
D
rop
Proj.
F6412 -
3/4” x 4 3/4”
3
1/2
3 1/8
D
rop
Proj.
F6413
3/4” x 6 1/2”
4 13/
16
4 3/8
D
rop
Proj.
F6420 -
3/4” x 4 1/4”
3
1/16
2 7/8
D
rop
Proj.
F6422 -
3/4” x 5 1/4”
4
3 7/16
D
rop
Proj.
Crowns
F6410F6420
F6412
F6413
F6422
Book of Profile Line Drawings28
F6430
3/4” x 4 1/4”
3 1/
8
3 1/8
D
rop
Proj.
F6432
3/4” x 5 1/2”
4
1/4
3 1/2
D
rop
Proj.
F6450 - 3/4” x 5 1/4”
3
7/8
3 5/8
D
rop
Proj.
Crowns
F6624
F6634
F1637
F6450
F6432
F6430
F1637 - 7/16” x 1 1/2”
F6634 - 5/8” x 3 1/4”
F6624 - 3/4” x 5 1/4”
more INFO at ferche.com 29
Crowns
F6614
F6644
F2644F6514
F6654
F1655
F1515
F6614 - 1 3/16” x 4 1/4”
F6644 - 9/16” x 4”
F2644 - 9/16” x 5 1/4”
F1655 - 9/16” x 3 1/4”F1515 - 9/16” x 3 1/4”
F6654 - 3/4” x 2 1/2”
F6514 -7/8” x 4 1/4”
Book of Profile Line Drawings30
Dentil Crown
F632 - Actual Size
F630 - 3/4” x 3 1/2” Crown
F631 - 7/16” x 5/8” Dentil (face and edge)
F635 - 7/16” x 5/8” Dentil (face only)
F630
F631
2
-1/2
2-7/16
D
rop
Proj. 4
-1/4
3-1/16
D
rop
Proj.
F637 - 3/4” x 5 1/4” Crown
F638 - 5/8” x 1” Dentil
F637
F638
F632 - 3/4” x 5 1/2” Crown
F632
not to scale
F633
3-1
5/16
3-13/16
D
rop
Proj.
F633 - 5/8” x 1” Dentil (face and edge)
F636 - 5/8” x 1” Dentil (face only)
Face Only
Dentil cut
Shown
edge & Face
Dentil cut
Shown
more INFO at ferche.com 31
Dentil Mould
F639 - 3/4” x 1 5/8”
F639
F634 - 3/8” x 1 1/2”
F634
F735 - 9/32” x 1” Dentil
F734 - 13/16” x 2 1/4”
F734
F735
Book of Profile Line Drawings32
F651 -
3/4” x 3/4”
F651
F652 -
1 1/16” x 1 1/16”
F652
F662 -
1/2” x 1/2”
F662
F661 -
3/4” x 3/4
F661
F656 -
1 5/16” x 1 5/16”
F656
F655 -
1 1/16” x 1 1/16”
F655
Outside Corner
Quarter Round
F667 -
3/4” x 3/4
F667
F660 -
9/16” x 1 1/8”
F660
Inside Corner
Corner Mouldings
more INFO at ferche.com 33
Panel Mouldings
F701 - 3/4” x 1 1/16”
F701
F709 - 11/16” x 2”
F709
F708 - 11/16” x 2”
F708
F711 - 11/16” x 2 1/4”
F711
F706 - 11/16” x 1 5/8”
F706R -w/ 1/4” x 1/4” rabbet
F706
F706RF705 - 11/16” x 1 5/8”
F705
F717 - 13/16” x 1 3/4”
F717R - w/ 1/4” x 1/4” rabbet
F717
F717R
F715 - 7/16” x 2 1/2”
F715
F710 - 1 1/16” x 2”
F710
F707 - 5/8” x 1 3/4”
F707R - w/ 1/4” x 1/4” rabbet
F707
F707R
F704 - 1/2” x 1 1/2”
F704
3/8”
5/16”
F799 - 13/16” x 2 1/4”
F799R - w/ 3/8” x 5/16” rabbet
F799
F799R
Book of Profile Line Drawings34
Panel Mouldings
F719 - 3/4” x 2 1/2”
F719
F720 - 11/16” x 2 5/8”
F720
F724 - 3/4” x 1 1/8”
F724
F726 - 1/2” x 3/4”
F726
F728 - 3/8” x 3/4”
F728
F733 - 7/16” x 1 3/8”
F733
F732 - 11/16” x 1”
F732R - 11/16” x 1”
F732
F731 - 1” x 1 1/8”
F731
F729 - 7/16” x 3/4”
F729
F730 - 3/4” x 1 1/8”
F730
F722 - 11/16” x 3”
F722
F718 - 5/8” x 2 1/2”
F718
F723 - 3/4” x 1 5/16”
F723
F721 - 11/16” x 2”
F721
F720 /F721 Installation
1/41/2
3/83/8
1/4
3/4
5/161/2
more INFO at ferche.com 35
F7422 -
11/16” x 3 1/2”
Chair rails
F7410
9/16” x 3”
F7412
5/8” x 3 1/2”
F722 -
11/16” x 3”
F7430
9/16” x 3”
F7432
5/8” x 3 1/2”
F7450 -
3/4” x 3 1/4”
F7442 -
9/16” x 3 1/2”
F7410
F7412
F722
F7422
F7450
F7442
F7432
F7430
Book of Profile Line Drawings36
Chair rails
F734
F735
F735 - 9/32” x 1” Dentil
F734 - 13/16” x 2 1/4”
Dentil Chair Rail
F7634
F1636
F7614
F7514
F7624
F7644
F7654
F7634 - 7/16” x 1 1/4”
F1636 Cap - 1/4” x 11/16” F7654 - 7/16” x 2 1/4”F7614 - 3/8” x 2 1/4”
F7514 - 9/16” x 2 1/4”F7624 - 9/16” x 2 1/4”
F7644 - 9/16” x 2 1/4”
more INFO at ferche.com 37
F775A, F775B, F775C
Tongue & Groove Paneling
F782 - 3/8” x 3 1/4”
F782
F783 - 3/8” x 3 1/4”
F783
F775A - 3/4” x 3 1/4”
F775B - 3/4” x 4 1/4”
F775C - 3/4” x 5 1/4”
Paneling Coverage
1 lft.of:= Coverage
3 1/4” = .25 sq.ft.
4 1/4” = .33 sq.ft.
5 1/4” = .42 sq.ft.
Add for waste
Book of Profile Line Drawings38
Mantel Mouldings
F745 - 11/16” x 1 1/2”
F745
F746 - 7/16” x 1 3/8”
F746
F749 - 1 1/16” x 2 3/4”
F749
F750 - 1 5/8” x 3 5/8”
F750
F751 - 1 5/16” x 5 3/8”
F751
Thresholds
F800 - 3/4” x 3 1/2”
F800
F801V - 13/16” x 3 1/2”
F801V
F754 -
11/16” x 3 5/8”
F754
** EXTERIOR DOOR SILLS **We also make exterior solid wood door sills.
Please contact us for more information.
more INFO at ferche.com 39
Handrails
Balusters
F900 - 1 3/8” x 1 1/2”
F900
F901 - 1 5/8” x 1 3/4”
F901L (laminated and fingerjointed)
F901
18’ Lengths
F904 - 1 1/4’ x 2 1/4”
F904L (laminated and fingerjointed)
F904
F902 - 1 3/8” x 1 3/4”
F902
F910 - 1 1/4” x 1 1/4”
F910
F911 - 1 1/2” x 1 1/2”
F911
F912 - 1 5/8” x 1 5/8”
F912
F913 - 1 3/4” x 1 3/4”
F913
18’ Lengths
NOTE: Laminated and fingerjointed handrails available in lengths up to 18’ and have a minimum quantity.
Solid handrails available in up to 16’ lengths, depending on species.
Book of Profile Line Drawings40
Full Rounds
Half Rounds F940 - 3/8” x 3/4”
F941 - 1/2” x 1”
F942 - 3/4” x 1 1/2”
F9425 - 7/8” x 1 3/4”
F943 - 1” x 2”
F944 - 1 1/4” x 2 1/2”
F945 - 1 1/2” x 3”
F943
F9425F944
F945F942
F941F940
F918 - 3/4”
F919 - 1”
F920 - 1 5/16”
F921 - 1 1/2”
F9215 - 1 3/4”
F922 - 2”
F923 - 2 1/2”
F924 - 3”F918
F919
F920
F921
F9215
F922
F923
F924
NOTE: Full Rounds and Half Rounds have a run minimum.
more INFO at ferche.com 41
Safety Rails
F966 - 1 1/4” x 5 1/2”
F966 F962
F962 - 1 1/4” x 5 1/2”
F961
F968
F960
F960 - 1 1/2” x 3 1/2”
F961 - 1 1/2” x 5 1/2”
F968 - 1 1/2” x 4”
(Special Order)
(Special Order)
(Special Order)
NOTE: Special Order handrails have a minimum run quantity.
Book of Profile Line Drawings42
Safety Rails
F956 - 1 1/2” x 5 1/2”
F957 - 1 1/2” x 5 1/2”
F956 - flat bottom F958 - 1 1/2” x 4”
F958
F959 - 1 1/2” x 5 1/2”
F959
F957 - circle bottom
(Special Order)
(Special Order)
(Special Order)
(Special Order)
NOTE: Special Order handrails have a minimum run quantity.
more INFO at ferche.com 43
Stair Parts
F986 - 1 1/16” x 1 1/4”
F986
F988 - 1 1/16” x 5 1/2”
F988
F987 - 1 1/16” x 3 1/2”
F987
F982 - 5/8” x 13/16”
F982