the gas laws. kinetic molecular theory (kmt) particles of matter are always in motion helps to...
TRANSCRIPT
The Gas Laws
Kinetic Molecular Theory (KMT)
• Particles of matter are always in motion
• Helps to explain differences between the 3 physical state
• Helps to explain properties of the 3 physical states
Solids
• Definite shape and volume
• Particles packed together in fixed positions
• Strong attraction between particles
• Very little kinetic energy
• Can’t be compressed
Liquids• Definite volume -
meniscus indicates volume
• Takes some shape of container
• Particles close but can move; less attraction between particles
• More kinetic energy than solid
• Can’t be compressed
Gases - Part 1Ideal - follows all KMT assumptions
• No definite shape - takes shape of container; fills container completely
• No definite volume - takes container’s complete volume• No attraction between particles• Most kinetic energy - in constant motion - but KE
depends on temperature• Collide between gas molecules creates pressure. More
collisions = more pressure• Collisions are elastic – gas molecules “bounce” off each
other and do not react
Ideal Gases - Part 2
• Gases can be compressed. Small number of particles within large volume of space
• Can diffuse - particles spread out to fill space
• Can effuse - pass through small openings
• Low density – small mass/large volume (which is why most float)
Equivalent Gas Pressures
• 1 atm (atmosphere) - force of atmosphere pressing down at sea level and 0ºC
• 760 mm Hg - height of Hg column at sea level and 0ºC (or 29.92 in Hg)
• 760 torr - same as mm Hg
• 14.7 psi (pounds/in2)
• 1.013 bars (or 1013 mbars)
• 101.325 kPa (or 101325 Pa) - force/area
Measuring Gas Pressures - Part 1•As air pushes downward, its force (pressure) pushes Hg up into the tube.
•Measuring the height of the Hg column in the tube measures the air pressure in mm Hg or torr
Measuring Gas Pressures - Part 2
(A) Absolute pressure (how a barometer works; air is the “gas”)
(B) Patm > Pgas because the Hg is higher on gas (weaker) side
(C) Patm < Pgas because the Hg is higher on air (weaker) side
The ABCD Gas LawsA = Avogadro’s Law
• 2 gases at the same temperature and pressure have equal volumes and equal number of molecules
• Molar volume: 22.4 L of any gas at STP has 6.02 x 1023 molecules
The ABCD Gas LawsB =Boyle’s Law
• Relationship between gas volume (V) and pressure (P) when temperature (T) and moles of gas (n) are constant
• Equation: P1V1 = P2V2
• Or to solve for V2, use
2
112 P
PVV
Boyle’s Law
As the piston pushes downward, pressure increases from P1 to P2. Volume decreases from V1 to V2
So when P increases, V decreases. This is an INVERSE (or INDIRECT) relationship
Boyle’s LawGraph
Pressure (mm Hg)Low High
Volume
Low
High
P and V
P and V
Boyle’s LawReal Life Applications
Lung Ventilation (Inhale/Exhale)
Drinking from a straw
Spray cans
The ABCD Gas LawsC = Charles’ Law
• Relationship between gas volume (V) and temperature (T) when pressure (P) and moles of gas (n) are constant
• V1 = V2 or
T1 T2
• Temperatures must be in ºK (ºC + 273 = ºK)
1
212 T
TVV
Charles’ Law
• As temperature increases, the molecules gain energy, move faster and spread out, so volume increases
• Since both temperature and volume are changing in the same direction it is a DIRECT relationship.
• Pressure remains constant (10 N)
• Number of particles remains constant
Charles’ Law Graph
High
HighLow
Low
Temperature (ºK)
Volume
T and V
T and V
Charles’ Law Real Life Application
Hot air balloons - hot air rises because volume goes up with temperature. The hot air is less dense (same mass but more volume) and so it rises.
The ABCD Gas LawsD = Dalton’s Law
• In a mixture, every gas exerts its own pressure called its PARTIAL PRESSURE
• The total pressure in the atmosphere (or container) is the sum of all the partial pressures
• Ptotal = P1 + P2 +P3 etc. • Dalton also proved atoms
existed
Dalton’s Law of Partial Pressures
Gay-Lussac’s Law
• Relationship between gas temperature (T) and pressure (P) when moles of gas (n) and volume (V) are constant
• P1 = P2 or P1T2 = P2T1
T1 T2
• Temperatures must be in ºK (ºC + 273 = ºK)
Temperature (K)Low High
High
Low
Pressure
Gay-Lussac’s Law Graph
T P
T P
Looks a lot like the graph for Charles’ law
Direct relationship
Gay-Lussac’s law Real Life Applications
Inner tube for tires. Gas can’t escape so volume is constant…unless the pressure gets too high and then it…
Gas confined in compressed gas tank
Combined Gas Law
• Combines both Boyles and Charles Laws
• More realistic - gas pressure and temperature can both be changing and affecting volume
• Temperatures must be in °K
• Which – temperature or pressure – affects volume most? Depends on which undergoes greatest change
Combined Gas Law Equation
P1V1 = P2V2
T1 T2
or
P1V1T2 = P2V2T1To solve for V2 use:
12
2112 TP
TPVV
Combined Gas Law – Example Problem
A weather balloon containing helium with a volume of 410.0 L rises in the atmosphere and is cooled from 27 ºC to –27 °C. The pressure on the gas is reduced from 110.0 kPa to 25.0 kPa. What is the volume of the gas at the lower temperature and pressure?
V1 = 410.0 L
P1 = 110.0 kPa
T1 = 27 °C
V2 = ?
P2 = 25.0 kPa
T2 = -27 °C+ 273 = 300 K + 273 = 246 K
P1V1 = P2V2
T1 T2
P1V1T2 = P2V2T1
110.0 kPa x 410.0 L x 246 K = 25.0 kPa x V2 x 300 K
110.0 kPa x 410.0 L x 246 K = 25.0 kPa x V2 x 300 K
25.0 kPa x 300 K 25.0 kPa x 300 K
1479.28 L = V2
1480 L (3 s.d.)
Ideal Gas Law
• Combines the ABC laws (Avogadro’s, Boyle’s, and Charles)
• Not only temperature, pressure, and volume change, but also moles
• Can be used to determine gas density, mass, and molar mass
Ideal Gas Law Equation
PV = nRT
P = Pressure at standard pressure
V = Volume at STP
n = moles at STP
T = Temperature at standard temperature
So what’s R?
R – The Gas Constant
PV = nRTP = Pressure at standard pressure (1 atm)
V = Volume at STP (22.4 L)
n = moles at STP (1 mole)
T = Temperature at standard temperature (273 K)
PV
nT
1 atm x 22.4 L
1 mole x 273 K
0.0821 atm•L
mole•K = R
Notice how R contains all the units for the variables. R’s value will only change if the pressure units change
= R
R – The Gas Constantother values
If pressure is measured in mm Hg (or torrs):
62.4 mmHg•L mole•K
If Pressure is measured in kPa:
8.31 kPa•L mole•K
If Pressure is measured in mbar:
83.1 mbar•L mole•K
If Pressure is measured in atm:
0.0821 atm•L mole•K
Ideal gas law – example problem
A 500. g block of dry ice [CO2 (s)] becomes a gas at room temperature. What volume will the dry ice have at room temperature (25°C) and 975 kPa?
PV = nRT
P = 975 kPa n = 500.g/molar mass CO2
V = ? R = use kPa version
T = 25°C (change to °K)
PV = nRT P = 975 kPa n = 11.36364 molesCO2
V = ? R = 8.31 kPa•L/mole•°KT = 298°K
975 kPa•V = (11.36364 mole)(8.31 kPa•L/mole•K)(298°K)
975 kPa•V = (11.36364 mole)(8.31 kPa•L/mole•°K)(298°K)
975 kPa 975 kPa
V = 28.86 L
V= 28.9 L (3 s.d.)
Graham’s Law of EffusionDiffusion of Gases
• Gases effuse – pass through small openings
• Gases diffuse – spread out from areas of high concentration to low concentration
• Diffusion rate depends on kinetic energy and molar mass
Graham’s Law – Part 2• Two gases at same temperature have
same average kinetic energy, therefore…
• Speed of diffusion and effusion depends on molar mass
• Heavy gases are slow, light gases are fast (inverse relationship)
Velocityfast
Velocityslow
=fast
slow
MolarMass
MolarMass
Oxygen has the highest molar mass, so it has the slowest speed. Hydrogen has the smallest molar mass; it is the fastest.
Graham’s Law – Example Problem #1
Determine the ratio of velocities for H2O and CO2 at the same temperature.
Determine the molar masses and which gas is fastest.
Molar Mass H20
2 H = 2.0 g
1 O = 16.0 g
18.0 g/mole
Molar Mass CO2
1 C = 12.0 g2 O = 32.0 g 44.0 g/mole
Light and Fast
Slow and Heavy
Velocityfast
Velocityslow
=fast
slow
MolarMass
MolarMass
VelocityH2O
VelocityCO2
=0.18
0.44= 444.2 = 1.56
So H2O is 1.56 x faster than CO2
So if H2O is 1.56 x faster than CO2 – what is the CO2’s velocity if the H2O has a velocity of 6.04 m/sec?
VelocityH2O
VelocityCO2= 1.56
6.04 m/sec
VelocityCO2
= 1.56
6.04 m/sec
1.56= Velocity CO2
3.87 m/sec = Velocity CO2