the hard drive destruction process – what the steps are and how to diy

9
THE HARD DRIVE DESTRUCTIO N PROCESS – WHAT THE STEPS ARE AND HOW TO DIY

Upload: arman-sadeghi

Post on 21-Apr-2017

117 views

Category:

Devices & Hardware


0 download

TRANSCRIPT

Page 1: The hard drive destruction process – what the steps are and how to diy

THE HARD DRIVE DESTRUCTION PROCESS – WHAT THE STEPS ARE AND HOW TO DIY

Page 2: The hard drive destruction process – what the steps are and how to diy

It is important that you wipe your hard drive clean of personal data before dropping it off.

This ensures that your personal information will not fall into the hands of the wrong person who could use it illegally.

http://www.allgreenrecycling.com

Page 3: The hard drive destruction process – what the steps are and how to diy

The Hard Drive Destruction Process at Recycling Plants

3

2

1 The recycling technicians will separate the hard drive from the computer.

The hard drive’s non data related items such as metals or plastics are separated into smaller parts

so that they can be recycled.

The hard drive will then be processed with some type of advanced equipment that reduces the drive to particles so

small that the data is unrecognizable.

http://www.allgreenrecycling.com

Page 4: The hard drive destruction process – what the steps are and how to diy

DEGAUSSING HARD DRIVE SHREDDINGDegausing can be combined with hard drive shredding. It is a magnetic process that is applied to the hard drives that ensures that all of the data will be removed magnetically.

http://www.allgreenrecycling.com

Page 5: The hard drive destruction process – what the steps are and how to diy

The Hard Drive Destruction Process at Home

WIPE THE DATA OFF OF YOUR HARD DRIVE (THE BEST PROGRAM IS DARIK’S BOOT AND NUKE)

SIMPLY BOOT THE CD-ROM, SELECT WHICH WIPE METHOD YOU WOULD LIKE, (THERE ARE A VARIETY OF OPTIONS TO CHOOSE FROM)

AND LET THE PROGRAM RUN OVERNIGHT.

http://www.allgreenrecycling.com

Page 6: The hard drive destruction process – what the steps are and how to diy

The Hard Drive Destruction Process at Home

REMOVE ALL OF THE SCREWS ON THE TOP CASING OF THE DRIVE

REMOVE THE SCREWS THAT ARE AROUND THE OUTSIDE OF YOUR DRIVE

THEN REMOVE ALL OF THE LABELS AND STICKERS FROM THE DRIVE, AND LOOSEN ANY ADDITIONAL SCREWS THAT ARE HIDING UNDER THE LABEL.

REMOVE THE TOP MAGNET WITH A SCREWDRIVER AND PLIERS

http://www.allgreenrecycling.com

Page 7: The hard drive destruction process – what the steps are and how to diy

The Hard Drive Destruction Process at Home

REMOVE THE LOWER MAGNET. YOU’LL HAVE TO POP THE ARRAY ON TOP OF IT, OR IF YOU CAN’T USE YOUR PLIERS TO REMOVE IT

REMOVE THE PLATTERS WITH YOUR TORX BITS. UNSCREW THE CAP.

ONCE YOU’VE GOTTEN TO THE PLATTERS, USE THE MAGNETS YOU REMOVED TO DO YOUR OWN DEGAUSSING OF YOUR HARD DRIVE. http://www.allgreenrecycling.com

Page 8: The hard drive destruction process – what the steps are and how to diy

The Hard Drive Destruction Process at Home

RUN THE MAGNETS BACK AND FORTH OVER THE PLATTERS A FEW TIMES.

THE MAGNETS ARE EXTREMELY STRONG, AND WILL WIPE ANY DATA YOU HAVE LEFT OFF.

NOW YOU GET TO BREAK YOUR HARD DRIVE INTO LITTLE PIECES. (USE A SLEDGEHAMMER, RUN IT OVER WITH A CAR, IT DOESN’T MATTER HOW YOU DO IT)

http://www.allgreenrecycling.com

Page 9: The hard drive destruction process – what the steps are and how to diy

CONTACT US

All Green Electronics Recycling All Green Electronics Recycling

ADDRESS

15561 Del Amo Ave. Tustin, CA 92780

PHONE

(714) 782-1485

EMAIL

[email protected]

http://www.allgreenrecycling.com