the indian institute of welding (iiw) organized by iiw ... · “construction of steel structures...
TRANSCRIPT
“Construction of Steel Structures”
Member - AWS D1 Structural Welding Committee
Mr. Robert E Shaw Jr. (Bob).
By
Design Welding
Inspection Seismic Welding
C. C. Girotra
S Bhattacharya
N. K. Sarkar
D. V. Kulkarni
P. S. Naganathan
The Indian Institute of WeldingIIW-INDIA HOUSE
200, Kalikapur Road, PO : Mukundapur, Eastend Park, 1st Road, Geetanjali Park,
Kolkata -700099, INDIA. Tel: +91-33 -2416 0826 / 2416 0942
Organized by "IIW India Foundation”
Limited Seats !!!
Assist Human resources development in welding in India.
Technology diffusion to industry and the individual.
Foster R & D in welding.
Promote health & safety in welding.
To promote education, training & qualification in welding
in India in line with international standards which would
be globally recognized and accepted.
Establish International standards of quality for the
Indian fabrication industry.
In line with its theme, “WELDING FOR NATION BUILDING', The Indian Institute of Welding (IIW-India) is proud in established an IIW-India Foundation for furthering the cause of Welding Technology. The IIW-India Foundation believes with the rapid changes happening in welding technology, there is a dire need for carrying out research in welding technology which will help India to move to become Knowledge based country. The foundation is an independent body so far its financial aspects are concerned. This is an inter-disciplinary body and funded by industry, academics and government agencies which in the long run benefit the industry. The Foundation facilitates research, training and education in welding and allied subjects. Each year the Foundation provides scholarship to deserving students to enable them to present technical papers in international seminars / conferences abroad. This will help creating careers that can sustain and grow with the industry. The Foundation wishes to develop resources, facility and infrastructure for the progress, usage and development of welding technology in India.”
Visit http://www.iiwindia.org/show-interest/
& provide your details on “Show Interest”
th4 to 17 Dec 2014 (one day in each city)th
The Indian Institute of Welding (IIW-India) was incorporated on the 22nd April, 1966 at Calcutta to foster the development of welding science, technology and engineering in India and since then has been serving the cause of the welding industry through its 13 branches throughout India. The institute is a non-profit making organisation registered under Section 25 of the Company's Act 1956 and is also registered under Section 12A of the Income Tax Act 1961, as an Inst i tut ion for charitable purpose.
Avinash Abnave
Krishnan Sivaraman
Neeraj Tiwari
Arul Jaychandran
Email : [email protected]
The Indian Institute of Welding (IIW)"IIW-India -AWS
Lecture-Series VII”Organizing Committee :
About the SpeakerRobert E Shaw Jr
Contact Person :
Co-ordinatorCity *
BHILAI
He is author of the popular steel construction references “Structural Welding Quality Handbook”and the “Structural Bolting Handbook”, as well as many technical papers. With 39 years of experience in steel construction and active for the past 20 years in the development of standards used for steel construction, he is a popular speaker known for his practical insights and applications for the industry.
IWelding processes and filler metals Engineering decisions and responsibilities Welding nomenclature
Design using prequalified status Steels and filler metals Prequalified joint design Welding procedures
Weld size, throat, and length skewed joints Permitted increases and required reductions
Minimum and maximum weld sizes Weld terminations, eccentricity
Welding personnel Non-prequalified steels, joints and processes
Weld tabs and weld backing Weld access holes
Inspectors and nondestructive testing technicians Inspection tasks Selection and specification of NDT - PT, MT, UT, RT
Machinery and bridges Welded joint details Maximum stresses and stress ranges
Governing standards , demand critical welds Design drawing and specifications
ntroduction to Welding & Design
Economical Design and Constructability
Design Values
Welding Details
Qualification Requirements
Fabrication Requirements
Inspection
Fatigue Design for Structures,
Seismic Welding
Course contents :
One day lecture is focused on the welding & design of welded joints for steel structures using latest editions of AWS D1.1 structural weldingcode, including use of IS 800.
Mr. B. K. Dey - [email protected]
Cell : 9407980008
Mr. V. Muralidharan - Cell : [email protected]
CHENNAI
Mr. M. Krishnamoorthy - Cell : 9444518900 [email protected]
Mr. Jose P. [email protected]
COCHIN
Mr. P. J. Vargheese - Cell : [email protected]
Mr. Harish Khurana - Cell : [email protected]
DELHI
Dr. Som Ashutosh - Cell : [email protected].
Mr. Malay [email protected]
KOLKATA
Mr. Debajyoti Debnath - Cell : [email protected]
Mr. Avinash Abnave - Cell : [email protected]
MUMBAI
Mr. Vineet Marathe - Cell : [email protected]
PUNE
Mr. K. D. [email protected]
Mr. P. Chellapandian - [email protected]
TRICHI
Mr. G. [email protected]
Mr. Krishnan Sivaraman - Cell : 9920735865 [email protected]
Mr. Neeraj Tiwari - Cell : [email protected]
Robert E Shaw Jr is President of the Steel Structures
Technology Center Inc, a consulting firm in the USA
providing consulting services, technical resources &
training related to the design, fabrication,erection,
inspection and quality of steel framed structures.
Bob is a member of the American Welding Society (AWS)
D1 Structural Welding Committee, including
subcommittees responsible for AWS D1.1 Structural
Welding Code-Steel and the AWS D1.8 Seismic
Supplement.He chairs the International Institute of Welding (IIW) Commission XV on Design, Analysis and Fabrication of Welded Structures and the subcommission XV-C on Fabrication. Bob serves on the American Institute of Steel Construction (AISC) Specifications Committee, including TC13 on Quality Control and Quality Assurance, TC6 on Connections, TC9 on Seismic Design, as well as AISC Connections Prequalification Review Panel.He is a member of the Specifications Committee of the Research Council on Structural Connections (RCSC), responsible for the Specification for Structural Joints using High Strength Bolts. Bob has presented lectures and seminars on welding and steel construction in Japan, China, India, Australia, New Zealand, Ecuador, Nigeria, Canada and the USA.
* Proposed City
Mr. Rajesh Madnani - Cell : [email protected]
BARODA
Mr. Gautam Gohil [email protected]
- Cell : 9879528508