the industry leader - since 1992. made in the the no. 1...

Guaranteed Architectural Bird Control SolutionsT he Industr y Leader - S ince 1992.T he No. 1 Speci f iedBird Contro l Productsby Archi tects & Gover nment Agencies .Effective & Humane Bird Control!

- Does Not Harm Birds!

VIRTUALLY INVISIBLE / DISCREET SOLUTIONS!

Made in the USA!

FlatTrackMeans NO BIRDS!

Bird Spike 2001 Stainless SteelBird Net 2000

Bird WireBird Jolt FlatTrack

Most Cost Effective, Permanent Solution.Keeps Job Costs Down!Available in Four Widths:1”, 3”, 5” and 8”.Easy to Install and Maintain.Thickest, Strongest and LongestLasting...Guaranteed!Industry Leading 10-Year Guarantee!

Low Profi le, Low VisibilityAnti-Perching Deterrent.Nylon Coated Spring Wire -- Idealfor Pigeons, Seagulls & Larger Birds.Low Cost; 5-Year Guarantee!

#1 Specifi ed Bird Net by Architects, Contractors & Gov’t. Agencies.Most permanent, Low Visibility Solution to Prevent Access of Pest Birds.Industry Leading 10-Year Guarantee - Rotproof, Waterproof.ISO 1806 Protocol Mesh Test!

Long Term; Low Visibility Electric Deterrent.Durable Crush Proof Design.Ideal for ALL Types / Sizes of Birds.

Fast / Easy to Install...Adaptable to Any Design Structure.

Before

After

Before

After

Does Not Hurt Birds.

All Net is Strength Tested!

Lowest Cost...GUARANTEED!

Lowest Cost Products Keep Job Costs Down!

10 81 13/BIRBuyLine 9385

9385_01.indd 19385_01.indd 1 10/24/08 2:46:00 PM10/24/08 2:46:00 PM

ADVANTAGES BENEFITS

GSA CONTRACT ADVANTAGE #GS-06F-0075P

BIRD SPIKE 2001 STAINLESS STEELTM

The Strongest Stainless Steel Bird Spike in the World!Lowest Price with Longest Guarantee make Spike 2001 the #1 Stainless Steel Spike product recommended by Architects, Contractors, and Government Agencies.

10-YearGuarantee!

40 Spikes per foot keep birds from landing or roosting.8” Wide Spike covers 10” wide area - no “double rows” needed!

VIRTUALLYINVISIBLE!

Strongest Stainless Steel Rods Made! Insist on 1.1 mm Diameter!U.V. Protected Polycarbonate with Stainless Steel Spikes, with 1.1 mm Diameter Rods.Non-refl ective metal fi nish.No Gap Design / Center Spike. Non-Staggered Alignment.Patented Design for Extra Strength and Stability.Permanent Deterrent - Blunt Tips Won’t Harm Birds or People!Two-Foot Sections.Total Flexibility!

Industry Leading 10-Year Guarantee! Won’t rust or deteriorate under extreme temperatures!Will not deter from Architectural Features.Best Spacing to deter Birds. Crucial Center Spike Provides Permanent Bird Control with No Areas for Birds to Roost or Nest.Effective against Pigeons, Seagulls, Starlings, and other pest birds!

Recommended by Major Animal Rights Groups.

Twice as long as all other products - cuts labor time in half!Fits any contour - Can bend 360 degrees!

Can bend 360

1” width

2 FEET

5” Side View

24”

Underside ViewPatented Bend & Crush Process

Spike Thickness: 1.1 mm Diameter

1/4” Glue Trough/Holes for Easy Adhesive Attachment.

1/4” Screw Holes for Screw/Bolt Attachment.

2

WILL NOT CUT OR INJURE THE INSTALLER!

5” width8” width 3” width

No GAP / Non Staggered Design - 40 Spikes per Foot

in Linear Array...Means Birds CAN’T Nest or Roost!

9385_02.indd 29385_02.indd 2 10/24/08 2:46:45 PM10/24/08 2:46:45 PM

BIRD SPIKE 2001 STAINLESS STEELTM

Useful CAD Details Available at our Website and on Sweets DVD

Made in the USA!

Before After


INDUSTRY LEADING 10-YEAR GUARANTEE!

Bird Spike 2001 Installation Cannery Row - Monterey, CA

MADE IN THE U.S.A.!

3

SPECIFICATIONS – BIRD SPIKE 2001

PART 1 – GENERAL

1.1 SUMMARYA. Design Requirements: Select appropriate size

and system as determined by site conditions to prevent birds from landing and roosting on specifi ed surfaces.

1.2 QUALITY ASSURANCEA. Single Source Responsibility: Furnish products from

one manufacturer for entire project.B. Obtain all technical information from the

manufacturer.C. Utilize Bird-B-Gone Authorized Installers who are

certifi ed in Bird-B-Gone product installations. Proof of Certifi cation required.

D. Installer shall visit the site to gather all information on existing site conditions.

1.3 SUBMITTALSA. Product Data: Submit manufacturer’s descriptive

literature and product specifi cations for each product including catalogs, installation instructions and other descriptive material.

B. Provide Warranty on material and installation.C. Provide samples of each type of spike excluding

proposed fastening methods.D. Provide statement by offi cial indicating that they are

a certifi ed installation company.1.4 PRODUCT HANDLING

A. Protect Bird-B-Gone, Inc. products from damage before, during and after the installation.

1.5 PROJECT CONDITIONSA. Coordination: Furnish samples of system(s) so

installation can be coordinated with existing conditions and within on-site conditions.

B. Visit site and fi eld-measure prior to fabrication and delivery of materials.

1.6 WARRANTYA. Product shall carry a minimum 10-year guarantee

against U.V. Breakdown.B. Installation shall be guaranteed for 2 years.

PART 2 – PRODUCTS

2.1 ACCEPTABLE MANUFACTURERManufacturer:Bird-B-Gone, Inc.;Bird Spike 2001 Stainless Steel23918 SkylineMission Viejo, CA 92692Tel: 800-392-6915 or 949-472-3122Fax: 949-472-3116P.O.C.: Bruce Donoho

2.2 PRODUCT DESCRIPTIONA. Model Designation:

1. SPIKE 2001 - 1”, 3”, 5” or 8”a. Width of Coverage:

i. Spike 2001-1”: 1” - 2” widthsii. Spike 2001-3”: 2” - 4” widthsiii. Spike 2001-5”: 5” - 7” widthsiv. Spike 2001-8”: 8” -10” widths

b. Minimum 40 Spikes per Foot in Linear Array / No Gap/Center Spike Non-Staggered Design

c. Height: 4-3/4”d. Base Strip: Flexiblee. Length: 2 ft. sectionsf. Patented Bend & Crush Anchoring of Steel

Spike into Base Unit.g. Spike thickness must be .05 thousands/1.1

mm diameter.h. Packaging: 50 ft/box(25-2ft. sections/box).i. Number of Rows: As determined by the manufacturer

and based on project conditions.j. Mounting System: As determined by the

manufacturer and based on project conditions.2.3 MATERIALS

A. Material: U.V. stabilized polycarbonate. Heat and weather resistant (+310 Deg. F. to –200 Deg. F.) Stainless Steel Rods

B. Construction: Rigid one-piece construction.C. Adaptation: Tin snips, hacksaw, etc. can be used to cut/

adapt the product to desired length.2.4 MOUNTING SYSTEMS

A. Wood: Use #8 wood screws. For every 2 ft. section of Bird Spike 2001, ten (10) #8 wood screws are required.

B. Steel, Brick, Stone or Concrete: Use an outdoor construction adhesive that is non-silicone based. Purchase from the manufacturer or call for recommended adhesives. If mounting surface warrants, screw or bolt down Bird Spike 2001 in conjunction with using the adhesive.

C. Pipes or Poles: Ty-Wraps can be used alone or in conjunction with an outdoor construction adhesive. For U.V. protected Ty-wraps, purchase directly from the manufacturer or call for recommended products. For adhesive, purchase from the manufacturer or call for recommended products.

PART 3 – EXECUTION

3.1 EXAMINATIONA. Examine the installation area and note any detrimental or

hazardous work conditions. Notify contracting offi cer or inspector of the detrimental work conditions.

B. Do not proceed with installation until conditions are corrected.

3.2 SURFACE PREPARATIONA. Surface should be thoroughly cleaned and free of bird

droppings, nesting materials, rust, peeling paint or other debris.

B. Remove or repair articles that may damage Bird Spike 2001 after installation, including overhanging foliage, brush and loose parts on the structure.

3.3 INSTALLATIONA. Install Bird Spike 2001 as recommended by the

manufacturer.B. Bird Spike 2001 should be installed correctly, covering the

entire depth of the surface, not just the perimeter.1. Follow the contours and angles closely; cut or break

away to fi t properly.2. Space materials in accordance with manufacturer’s

recommendations.3.4 INSPECTION

A. Visually inspect Bird Spike 2001 for any signs of poor installation, including loose screws, fasteners and unremoved debris.

B. Immediately correct and repair as necessary.

END OF SPECIFICATIONS

Virtually Invisible!

Bird Spike 2001 Installation


9385_03.indd 39385_03.indd 3 10/28/08 1:33:33 PM10/28/08 1:33:33 PM

4

BIRD NET 2000

CALL 1-800-392-6915 FOR TECHNICAL ASSISTANCE

WE’VE GOT YOU COVERED AT THE LOWEST INDUSTRY PRICES...AND THE LONGEST GUARANTEE!!!BIRD NET 2000 OFFERS TOTAL BIRD EXCLUSION!

PORTLAND INT’L AIRPORT, ORwhich Utilized 90,000 sq. ft. of

Bird Net 2000

Airline Hangars

Bird Netting is the most permanent, effective, low visibility solution to prevent access of pest birds, BIRD NET 2000 offers 100% exclusion from the following:

SCOTT AIR FORCE BASE, ILAircraft Hangar which Utilized 150,000 sq. ft.

of Bird Net 2000Entire Building Facades (top to bottom)...or an enclosed/ semi-enclosed area where you wish to exclude pest birds.Courtyards

Church Steeples

Overhangs

CanopiesSignsArchways

BalconiesEaves

ParkingGarages

LoadingDocks

WarehousesRooftops

#1 SPECIFIED BY ARCHITECTS AND GOVERNMENT AGENCIESADVANTAGES

Superior quality knotted polyethylene 12/6 net.

ISO 1806 Protocol Test is excess of 40 lbs

U.V. Stabilized: Rot Proof; Waterproof!Affordable! Keeps Job Costs Down!

BENEFITS“Super” strong - In House Strength Testing on Every Net!Industry Leading 10-YEAR GUARANTEE!Lowers Liability Risks and Associated Costs.Highest Quality Bird Net Available...at the Lowest Cost.

Costco Store Canopy

Irvine TransportationCenter - Irvine, CA

10-YearGuarantee!

Break strength and tensile strength are closely monitored to assure only the highest quality netting.

9385_04.indd 49385_04.indd 4 10/24/08 2:50:00 PM10/24/08 2:50:00 PM

BIRD NET 2000

5CALL 1-800-392-6915 FOR TECHNICAL ASSISTANCE


MESH SIZES

MESH COLORS Stock Colors: BLACK, STONE or WHITE

3/8” MESH: BATS/ALL BIRDS3/4” MESH: ALL BIRDS1-1/8” MESH: STARLINGS/PIGEONS2” MESH: PIGEONS/SEAGULLS

* Listing of Authorized Contractors Available Upon Request

Bird Net 2000 is the netting of choice by architects, contractors, and government agencies.Examples Include:

Andrews Air Force Base DisneylandEllis Island Scott Air Force BaseLindbergh Field Costco WarehouseYankee Stadium Petco Park, San DiegoPope Air Force Base Brooklyn BridgeSoldier Field, Chicago SeaWorld/Anheuser-Busch

Theme ParksTechnical Data:

• Why Take Chances: INSIST on Bird Net 2000 with 10-Year Guarantee!

• ISO 1806 Protocol Tested Bird Net...at the Lowest Price!

All Netting is Strength Tested!

Our engineers are ready to help you specify the right hardware for your unique project.

Just call 1-800-392-6915 for personalized assistance.

Design: Six strands of Polyethylene U.V. treated twine. Each strand is 12/1000” thick. The fi laments are twisted and knotted for ultimate strength and long life. Pressure stretched and tightened.Burst Strength: ISO 1806 Protocol Mesh Test in Excess of 40 lbs.Thermal Properties:

Electrical Properties: Non-Conductive.

SPECIFICATIONS – BIRD NET 2000

PART I – GENERAL

1.1 SYSTEM DESCRIPTIONA. Design Requirements: Select appropriate size

net and fastening system as determined by site conditions and mounting surface.

1.2 SUMMARYA. Provide labor, materials and supervision to install

Bird Control Netting. The bird netting shall stop sparrows, starlings, pigeons, seagulls and all birds from roosting on the building structure.

1.3 QUALITY ASSURANCEA. Obtain all technical information on products and

installation from the manufacturer.B. Utilize Bird-B-Gone Authorized Installers who are

certifi ed in Bird-B-Gone product installations. Proof of Certifi cation required.

C. All Netting Must Carry Strength Test Cerifi cation.D. Installer shall visit the site to gather all information

of existing site conditions.E. Single Source Responsibility: All parts and

accessories of the bird netting shall be from one manufacturer.

1.4 SUBMITTALSA. Submit all descriptive information on products and

installation from the manufacturer.B. Provide Warranty on material and installation.C. Provide samples of each type of bird netting

used, including proposed fastening methods and hardware.

D. Provide statement by offi cial indicating that they are a Certifi ed Installation Company.

1.5 PRODUCT HANDLINGA. Protect Bird-B-Gone products from damage before,

during and after the installation.1.6 PROJECT CONDITIONS

A. Coordination: Furnish all anchorage devices required to fasten system to and around existing building structure. Coordinate installation with existing conditions and within on-site tolerances.

B. Visit site and fi eld-measure prior to fabrication and delivery of materials.

1.7 WARRANTYA. 3/4” Bird Netting shall carry a minimum 10-year guarantee

against U.V. breakdown for Black Netting, 3-year guarantee for White and Stone Netting.

B. Installation shall be guaranteed for 2 years.C. Installation shall be performed by a Certifi ed Bird-B-Gone

Authorized Installer. 1. Proof of Certifi cation required.

PART 2 – PRODUCTS

2.1 ACCEPTABLE MANUFACTURERManufacturer: Bird-B-Gone, Inc.Bird Net 200023918 SkylineMission Viejo, CA 92692Tel: 800-392-6915 or 949-472-3122Fax: 949-472-3116P.O.C.: Bruce Donoho


1. 3/4” Heavy Duty 12/6 Bird Net 20002. 1-1/8” Heavy Duty 12/6 Bird Net 20003. 2” Heavy Duty 12/6 Bird Net 2000

B. Color: Black, Stone or White2.3 MATERIAL

A. Material: U.V. stabilized knotted polyethylene net. Flame resistant (270 Deg. F. melting point). Rot-proof, non-conductive and stable in sub-zero temperatures.

B. Construction: 12/6 Bird Net 2000, comprised of 6 mono fi laments, each 0.012” thick with U.V. Stabilizers added. Mono fi laments are twisted together to produce a strong twine with 160-200 twists per meter.

C. Burst Strength: ISO 1806 Ptotocol Mesh Test in excess of 40 lbs.D. Sizes: As required.E. Hardware: All metal hardware or products are galvanized or

stainless steel.2.4 MOUNTING SYSTEMS

A. Solid Steel: For corner attachments use Bird-B-Gone Corner Bolts with lock nuts or Bird-B-Gone Multi-Purpose Cable Brackets with powder actuated fi re-in-pins for intermediate attachments.

B. Steel I-Beams: For corner attachments, use bolts with lock nuts. For intermediate attachments, use the appropriate size Bird-B-Gone Girder Clips or Multi-Purpose Cable Brackets (or w/Hilti-Pins.)

C. Sheet Metal: Use Bird-B-Gone Multi-Purpose Cable Brackets with self-tapping screws for both corner and intermediate attachments.

D. Brick, Concrete and Stone: For corner attachments, use Bird-B-Gone expanding corner net bolts. For intermediate attachments, use one of the following Bird-B-Gone attachments: open or closed net loop, net spike, split pin and anchor rivet or multi-purpose cable bracket.

PART 3 – EXECUTION

3.1 EXAMINATIONA. Examine the installation area and note any detrimental or

hazardous work conditions. Notify contracting offi cer or inspector of the detrimental work conditions.

B. Do not proceed with installation until conditions are corrected.



B. Remove or repair articles that may damage Bird Net 2000 after installation, including overhanging foliage, brush and loose parts on the structure.

3.3 INSTALLATIONA. Install Bird Net 2000 as recommended by the manufacturer.

Bird Net 2000 shall fi t the area to be protected perfectly so pest birds cannot enter the protected area, and so the netting blends perfectly with the architecture.

B. Bird Net 2000’s correct mesh size shall be specifi ed to ensure exclusion for the correct pest bird.

C. Bird Net 2000 shall be installed tightly and securely to ensure a long lasting installation that is visually hard to see.

3.4 INSPECTIONA. Visually inspect Bird Net 2000 for any signs of poor

installation, including loose screws, fasteners or un-removed debris.

B. Immediately correct and repair as necessary.

END OF SPECIFICATION

High Temp: Melting point in excess of 270 F. Low Temp: Stable to minus 250 F.

In-House Net Strength Testing!


9385_05.indd 59385_05.indd 5 10/24/08 2:50:44 PM10/24/08 2:50:44 PM

BIRD JOLT FLATTRACK -ELECTRIC BIRD ABATEMENT SYSTEM

6 GSA CONTRACT ADVANTAGE #GS-06F-0075P

VIRTUALLY INVISIBLE!

FLAT TRACKMEANS

NO BIRDS!

Before After

#1 Electric Track Specifi ed by

Architects in the USA!

The FlatTrack System is a virtually invisible, electrically charged track that gives birds a mild electrical jolt when birds land on it. Target birds will leave the affected structure where it is installed. FlatTrack is the ULTIMATE in bird behavior modifi cation.

Bird Jolt FlatTrack Is the Ultimate in Behavior

Modifi cation!

Before

After

ADVANTAGES AND BENEFITS:

Prevents Electrical Current Creep!

U.V. Protected FLEXIBLE PVC Base Impregnated with Conductive Stainless Steel Braid!

Unique “Form Fitting” Design Allows Seamless Coverage of All Geometric Surfaces Including curves & circles!

Durable...Crush Proof Design means that Integrity of Product can withstand Intense Pressure...even from Window Washing & Maintenance Personnel!

FAST and Easy to Install...Adaptable to Any Design Structure or Material Substrate!

CrushProof

Actual FlatTrack Installation

Hopkins International Airport, Cleveland, OH

Patent Pending Anti-Arcing Design

Glue Troughs Anti-Arcing Lip

Anti-Arcing Insulator Conductive Strip

1/4”

1-1/2” Width

9385_06.indd 69385_06.indd 6 10/24/08 2:51:13 PM10/24/08 2:51:13 PM

BIRD JOLT FLATTRACK -ELECTRIC BIRD ABATEMENT SYSTEM

7GSA CONTRACT ADVANTAGE #GS-06F-0075P


8 "

2" 2"

8-1/2 "

2" 2"

“Snug Fit” Corner Connector Makes Turning Corners Easy!

“Snug Fit” Connector

Top View of Bird Jolt FlatTrack on Channel Letter Sign

Conforms to Any Geometric Surface

Available In:

Grey, Black, Stone & Terracotta

Recommended Track Spacing:

Choice of Solar or Direct Charger Available:

Solar Charger Direct ChargerDirect Super

ChargerInput Voltage: 4 VDCOutput Voltage: 7.0 KV (+/-) 20% Open Circuit Voltage, Intermittent DC Output

Input Voltage: 110-120 VACOutput Voltage: 800 V (+/-) 20% Open Circuit Voltage, Intermittent AC Output

Input Voltage: 110-120 VACOutput Voltage: 4.5 KV (+/-) 20% Open Circuit Voltage, Intermittent DC Output

SPECIFICATIONS – BIRD JOLT FLATTRACK ELECTRIC BIRD ABATEMENT SYSTEM

PART 1 – GENERAL1.1 SUMMARY

A. Description of work: Work for this section includes, but is not limited to the following:1. Electrifi ed wire bird deterrent system.2. Control devices and associated wiring and

connections for the work of this section.1.2 QUALITY ASSURANCE

A. Single Source Responsibility: Furnish products from one manufacturer for the entire project.

B. Obtain all technical information from the manufacturer.

C. Utilize labor or Bird-B-Gone Authorized Installers who are knowledgeable in Bird-B-Gone product installations. Proof of Certifi cation required.

D. Installer shall visit the site to gather all information of existing site conditions.

1.3 SUBMITTALSA. Submit all descriptive information for the

manufacturer including catalogs, installation instructions and other descriptive material.

B. Provide Warranty on material and installation.C. Provide samples of each type of hardware, including

proposed fastening methods.D. Provide statement by offi cial indicating that they are

a Certifi ed Installation Company.1.4 SYSTEM REQUIREMENTS

A. Electrical Requirements:1. Provide wiring in accordance with applicable local

codes and National Electric Code Standard.2. Test wiring system for insulation to ground.

1.5 PRODUCT HANDLINGA. Protect Bird-B-Gone products from damage before,

during and after the installation.1.6 PROJECT CONDITIONS

A. Coordination: Furnish samples of system so installation can be coordinated with existing conditions and within on-site tolerances.

PART 2 – PRODUCTS2.1 ACCEPTABLE MANUFACTURER

A. Manufacturer:Bird-B-Gone, Inc.Bird Jolt FlatTrack – Electric Bird Abatement System23918 SkylineMission Viejo, CA 92692Tel: 800-392-6915 or 949-472-3122Fax: 949-472-3116P.O.C.: Bruce Donoho


1. Bird Jolt FlatTrack – Electric Bird Abatement Systema. Height: 1/4” at Highest Pointb. Width: 1-1/2”.c. Features:

i. Patent Pending Anti-Arcing Designii. Two (2) Stainless Steel Braided Wire Strips 1/4” wide sewn in top of trackiii. Two (2) Glue Troughs running on bottom of strip for easy installation and maximum adhesion.

d. Base Strip: Flexible - Can bend 360 deg. on vertical plane.

e. Length: 100 ft. rolls.f. Packaging: 100 ft. kits with all installation hardware

needed.g. Color: Available in Grey, Stone, Black, or Terracotta.i. As designated by the product specifi cations.h. Number of rows as determined by the manufacturer

and based on project conditions.i. Mounting Systems: As determined by the

manufacturer and based on project conditions.j. Lead-in Wire: Use 14-guage Copper lead-in wire

2.3 MATERIALSA. Bird Jolt FlatTrack System Kit Components:

1. Flexible U.V. Stabilized PVC base with stainless steel braided wires sewn into base strip.

2. Bilingual Warning labels.a. 10 per 100 ft. installation.

3. Power terminal connectors.a. 2 per 100ft. installation kit.

4. Snug Tight™ Connectorsa. 3 per 100ft. installation kit.

B. Bird Jolt FlatTrack Charger System Options:1. CHG-SLR740

a. Bird Jolt FlatTrack Solar Charger: Input Voltage: 4.0VDC. Output Voltage: 7.0KV (+/-) 20% Open Circuit Voltage Intermittent DC Current

2. CHG-AC750a. Bird Jolt FlatTrack Direct Charger: Housed in

NEMA Type 4 or 3 weatherproof enclosure. Input Voltage: 110-120VAC. Output Voltage: 800V (+/-) 20% Open Circuit Voltage, Intermittent AC Output

3. CHG-ACBFCa. Bird Jolt FlatTrack Super Charger Direct Charger:

Input Voltage: 110-120VAC. Output Voltage: 4.5KV (+/-) 20% Voltage, Intermittent DC Output

C. Construction: 1. Bird Jolt FlatTrack: Flexible one-piece construction.2. Installation Hardware: Highest quality stainless steel,

plastic and metal components.D. Adaptation: Sharp Scissors , Exact-O Knife, Cable Cutters,

Etc. can be used to cut/adapt the product to desired section length.

2.4 MOUNTING SYSTEMSA. Steel, Brick, Stone or Concrete: Attach Bird Jolt FlatTrack

Mounting Brackets and Bird Jolt FlatTrack using an outdoor construction adhesive that is non-silicone based. Purchase directly from the manufacturer or call for recommended adhesives.

PART 3 – EXECUTION3.1 EXAMINATION

A. Examine the installation area and note any detrimental or hazardous work conditions. Notify contracting offi cer or inspector of the detrimental work conditions.

B. Do not proceed with the installation until conditions are corrected.



B. Remove or repair articles that may damage Bird Jolt FlatTrack Electric Bird Abatement System including overhanging foliage, brush and loose parts on the structure.

3.3 INSTALLATIONA. Install Bird Jolt FlatTrack Electric Bird Abatement System.

1. Warning: Electrical track systems should not be used if contact with fl ammable liquids, vapors, or fumes is possible. Electric track systems should never be used in and around gas stations.

2. Install with appropriate anchors or fasteners for each substrate.

a. Glue track to mounting surface. b. All FlatTrack strips should be adhered (glued or

secured) to area being treated.3. Space materials in accordance with the manufacturer’s

recommendations.a. Follow angles and contours closely.

4. Install bilingual warning labels near power source and no more than 10’ apart on buildings, and on windows where electrifi ed wire is on outside ledge.

3.4 INSPECTIONA. Upon completion of installation, test operation to

demonstrate satisfactory operation and acceptability.B. Visually inspect Bird Jolt FlatTrack Electric Bird Abatement

System for any signs of poor installation, including loose screws, fasteners or un-removed debris.

C. Immediately correct and repair as necessary.

END OF SPECIFICATIONS

Before

After


9385_07.indd 79385_07.indd 7 10/24/08 2:51:49 PM10/24/08 2:51:49 PM

Over 100,000 Satisfi ed Customers Since 1992!Used by Top Construction Companies in the U.S.: Turner Construction • Clark Construction • Skanska • Fluor Corp. • PCC Construction • Swinerton • Centex • J.E. Dunn • Webcon Our Customers Include: Lincoln Center for the Performing Arts • Disneyland • Seaton Foundation • New York State Dept. of Trans-portation • University of Southern California • Ft. Stewart-GA • Purdue University • City of Baltimore DPW • McDonald’s • SeaWorld • City of Austin, TX • Lawrence Livermore National Laboratory • Pacifi c Gas & Electric • Scott Air Force Base • Hertz Rent-A-Car • School District of Philadelphia • Camp Pendleton Marine Corps Base • Marriott Hotels • United States Coast Guard • L.A. Unifi ed School District • Naval

Reserve Laboratory, Washington, D.C. • Costco Stores • Western Michigan University • V.A. Medical Center-Long Beach, CA • Trammel Crow • United States Postal Service • Nordstrom Stores • Cedars-Sinai Medical Center • Kaiser Permanente • University of Georgia • Vandenberg AFB • South Carolina Electric & Gas • Northwest Airlines • Bay Area Rapid Transit • Chicago Transit Authority • W.M. Grace Construction • Lusardi Construction • Roy Anderson Corp. • The McCarty Corp. • Fine Line Construction • Wal-Mart • Andrews AFB • Ellis Island Monument • Soldier Field, Chicago, IL • Yankee Stadium

FAITH • FAMILY • FRIENDS!FAITH • FAMILY • FRIENDS!

Professional Installer

PeopleSame Day

Service Support

Shock Track Bird Spike

2001

Bird Spike

2000

Bird Net 2000

Bird Wire

Bird Spider

Proudly Made by Bird•B•Gone

in the USA!

Professional Bird Control Solutions

TM

1-800-392-6915

Professional Installer Prorofofefes

rr Professional Bird Control Solutioutio

Products

ProductCatalogue

Summer 08 SEE OUR FULL LINE

OF BIRD CONTROL PRODUCTS AND READY

TO USE CAD DETAILSw w w . b i r d b g o n e . c o m


CONTACT US FOR FREE SAMPLES, CATALOGUE & TECHNICAL ASSISTANCE FOR CHOOSING THE RIGHT BIRD

CONTROL PRODUCTS AT 1-800-392-6915TOLL FREE BIRD•B•GONE HOT LINE 800-392-6915

P

Additional Information / Assistance Authorized Contractors On-Site Assistance

Bird•B•Gone, Inc.23918 Skyline • Mission Viejo, CA 92692

Tel: 949-472-3122 • FAX: 949-472-3166 • www.birdbgone.come-mail: [email protected]

We can help! If you need product samples, call us at 1-800-392-6915.

BIRD•B•GONE specifi cations can also be obtained:

BIRD•B•GONE’s technical advisors and team of Authorized installers can be available to come to your site to provide you with proposals and assistance. Please call our offi ce at 1-800-392-6915 or e-mail us at [email protected]

BIRD•B•GONE has a network of certifi ed bird control experts who are knowledgeable in analyzing and solving your specifi c pest bird problem. Call our offi ce at 1-800-392-6915 for a list of Authorized Installers in your area; or e-mail us at [email protected]

On Sweets DVD

Via e-mail at [email protected] BIRD•B•GONE’s web site at www.birdbgone.comOn Sweets web site at www.sweets.com

9385_08.indd 89385_08.indd 8 10/24/08 2:52:23 PM10/24/08 2:52:23 PM

the industry leader - since 1992. made in the the no. 1...

Documents