The Leader in Customized Site Furnishings

Our Commitment

• Provide High Quality, Long Lasting Products that will hold up against all of the elements

• Constantly Improving Manufacturing Process to Provide you with more Affordable Site Furniture

• We Guarantee our Site Furniture to be free from defects in workmanship and materials for a period of three full years

Other Outdoor Receptacles

• Overlapping Material and Partial Welds – Leave uncoated surfaces that promote rusting and corrosion in the first few months of use.

Premier Site Furniture Receptacles

• One Piece Laser Cut Design, Fully Welded – Makes one continuous piece of metal that is impervious to rust and corrosion.

Receptacles

Other Outdoor Benches• Picture Taken 1

year after install• Made from

thinner metal causes sagging in the middle

• Not Fully Welded Notice the paint peeling and the rust spots on the concrete

• Made with Carbon Steel FeetPremier Site Furniture lost this bid because our price was a little

higher. The Buyers neglected quality and purchased solely on price.

Premier Site Furniture Benches• Complimentary

Custom Laser Cut Logos

• One Piece Laser Cut Design

• Fully Welded Joints

• Stainless Steel Feet to eliminate Rusting

• Super Durable TGIC Powder Coating

Will Not Sag – Made from ¼” Cold Rolled Steel

Benches

Other Picnic Table ManufacturesWill Tip If Loaded On One

Side Only

120°

Premier Site Furniture Picnic Tables

78°

Will Not Tip

Picnic Tables Cont’d

• Solid Metal Design

• Seats 8 comfortably

• Inground or Surface Mount

Bike Racks and Planter Boxes

Superior Powder Coating

• The secret to our long lasting, durable and professional looking products is our one piece laser cut design combined with our powder coating processes.

• Powder Coating Process– Sandblast to SSPC-SP 5/NACE “White Finish” • Cleans surface of all impurities• Creates a textured surface that provides

better adhesion of the powder coat

Superior Powder Coating Cont’d

• Powder Coating Process Continued– Epoxy Primed• Makes our product impervious to corrosion and rust• Improves salt spray test results by 1000 hours plus• Improves color and sheen retention

– Powder Coated with “Super Durable TGIC” polyester top coat• The most durable coating on the market• Resists chalking, weathering and retains color and gloss

AAMA 2604-05 Test Procedures and Performance Requirements

AAMA 2604-05 Test Procedures and Performance RequirementsTest Requirements ComplianceSalt-Spray Resistance: 3,000 hours per ASTM B 117 YesWeathering: Color Retention, 5-year south Florida sun, per ASTM D 2244 with a maximum 5deltaE change YesWeathering: Chalk Resistance, 5-year south Florida sun, per ASTM D 4214 with a max rating of 8 YesWeathering: Gloss Retention, 5-year south Florida sun, per ASTM D 523 with a min loss of 30% YesWeathering: Resistance to Erosion, 5-year south Florida sun, with less than 10% film loss YesChemical Resistance: Muriatic Acid, Mortar, Nitric Acid, Detergent and Window Cleaner YesDry Film Hardness: per ASTM D 3363 with no rupture YesAdhesion: Dry Adhesion, Wet Adhesion and Boiling Water Adhesion using the cross hatch method with 0% failure Yes