the lock range - dormaproducts.dorma.com/content/download/14895/136549/lock range_201… · 12209,...
TRANSCRIPT
Mortice locks for timber and narrow-stile doors
THE LOCK RANGE—
2 DORMA
THE LOCK RANGE MORTICE LOCKS
DORMA Locks Mortice locks for timber doors 6
Mortice locks for narrow-stile doors 12
CONTENTS—
DORMA 3
THE LOCK RANGE MORTICE LOCKS
DORMA locks offer compelling benefits thanks to assured high quality and functional integrity combined with long service lifetimes. With high-grade materials, careful manufacturing and a comprehensive quality management system, these
products are able to satisfy virtually all the technical requirements ever likely to arise. Conforming to BS EN 12209, BS EN 179 or DIN standards, DORMA locks offer unbeatable performance, safety and
security.Under Approved Document M and BS8300, locks are recommended to have a minimum backset of 55mm and centres of 72mm (the distance from the lever handle follower to key centre) to ensure ease of operation.
Both the Premier and Contract series of locks meet these recommendations.Whichever solution you opt for, you can be sure that absolute reliability and engineering excellence will be included as standard.
CF267
All DORMA ‘F’ and Mortice Escape Locks are CE marked and CERTIFIRE approved for 1hr on timber doors and 4hrs on metal doors (intumescent pack required for 1hr timber doors – not required for 1/2hr timber fire doors or metal doors).
4 DORMA
THE LOCK RANGE MORTICE LOCKS
WELCOME TO THE SAFE SIDE—
Premier seriesMortice locks for timber doors
Mortice 9mm Lock with Nightlatch with Project sashlock & Mortice latch Follower Emergency Emergency Lock with roller catch Sashlock WC sashlock Latch Nightlatch anti-thrust bolt rollerbolts Deadlock W.C. sashlock & deadlock lock escape lock escape lock latch and bolt and bolt Deadlock Latch
Lock No. 151F 191F 115F 116F 117 484 132F 752F/790F 515F/532F 180 181 182 952.0 985.0 917.0 936.0
Features BS EN 12209 BS EN 12209 BS EN 12209 BS EN 12209 DIN 18251-1, DIN 18251-1, BS EN 12209 BS EN 12209 BS EN 12209 BS EN 12209 DIN 18250 DIN 18250 DIN 18251-2, DIN 18251-2, DIN 18251-2, DIN 18251-2, marked marked marked marked Class 3 Class 3 marked marked marked marked EN 179 EN 179 Class 3 Class 3 Class 3 Class 3
Bolt projection (mm) Double-throw, Single-throw, Double-throw, Double-throw, Double-throw, Double-throw, 20 Double-throw, Double-throw, Double-throw, Double-throw, Single-throw, Single-throw, Single-throw, 20 10 20 20 20 Single-throw, 10* 20 22 22 22 20 20 20
Backset D (mm) 55, 60 55, 60 55, 60 55, 60 55, 60 55, 60 55, 60 55 55 55 55 55 25, 30, 35, 25, 30, 35, 25, 30, 35, 25, 30, 35, 40, 45 40, 45 40, 45 40, 45
Forend widths (mm) 20 20 20 20 20 20 20 20 20 20 20 20 24 24 24 24
Latch and bolt position Central Central Central Central Central Central Central Central Central LH or RH LH or RH LH or RH Central Central Central Central
Forend designs
Square ends ● ● ● ● ● ● ● ● ● ● ● ●
Radiused ● ● ● ● ● ● ● ● ● ● ●
Forend finishes
Satin-brushed stainless steel ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
For Europrofile cylinders ● ● ● ● ● ● ● ● ● ● ● ● ●
For bathroom/WC,
bolt projection 10 mm ● ●*
Complete with strike plate and screws ● ● ● ● ● ● ● ● ● ● ● ●
Page 6 6 7 7 7 8 9 10 10 11 11 11 12 13 14 15
*790F
DORMA locks – unique design features combined with manufacturing quality of the highest standard
DORMA 5
THE LOCK RANGE MORTICE LOCKS
Mortice locks for narrow-stile doorsMortice escape locksContract series
Mortice 9mm Lock with Nightlatch with Project sashlock & Mortice latch Follower Emergency Emergency Lock with roller catch Sashlock WC sashlock Latch Nightlatch anti-thrust bolt rollerbolts Deadlock W.C. sashlock & deadlock lock escape lock escape lock latch and bolt and bolt Deadlock Latch
Lock No. 151F 191F 115F 116F 117 484 132F 752F/790F 515F/532F 180 181 182 952.0 985.0 917.0 936.0
Features BS EN 12209 BS EN 12209 BS EN 12209 BS EN 12209 DIN 18251-1, DIN 18251-1, BS EN 12209 BS EN 12209 BS EN 12209 BS EN 12209 DIN 18250 DIN 18250 DIN 18251-2, DIN 18251-2, DIN 18251-2, DIN 18251-2, marked marked marked marked Class 3 Class 3 marked marked marked marked EN 179 EN 179 Class 3 Class 3 Class 3 Class 3
Bolt projection (mm) Double-throw, Single-throw, Double-throw, Double-throw, Double-throw, Double-throw, 20 Double-throw, Double-throw, Double-throw, Double-throw, Single-throw, Single-throw, Single-throw, 20 10 20 20 20 Single-throw, 10* 20 22 22 22 20 20 20
Backset D (mm) 55, 60 55, 60 55, 60 55, 60 55, 60 55, 60 55, 60 55 55 55 55 55 25, 30, 35, 25, 30, 35, 25, 30, 35, 25, 30, 35, 40, 45 40, 45 40, 45 40, 45
Forend widths (mm) 20 20 20 20 20 20 20 20 20 20 20 20 24 24 24 24
Latch and bolt position Central Central Central Central Central Central Central Central Central LH or RH LH or RH LH or RH Central Central Central Central
Forend designs
Square ends ● ● ● ● ● ● ● ● ● ● ● ●
Radiused ● ● ● ● ● ● ● ● ● ● ●
Forend finishes
Satin-brushed stainless steel ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
For Europrofile cylinders ● ● ● ● ● ● ● ● ● ● ● ● ●
For bathroom/WC,
bolt projection 10 mm ● ●*
Complete with strike plate and screws ● ● ● ● ● ● ● ● ● ● ● ●
Page 6 6 7 7 7 8 9 10 10 11 11 11 12 13 14 15
*790F
151FMortice Sashlock for Europrofile cylinders Night Latch Function Follower-to-Keyway centres 72mm
191FMortice Bathroom/WC Lock 8mm turn follower Follower-to-turn follower centres 78mm
Features– Galvanised steel lock case,
bronze bushed– Latch bolt
nickel- plated brass– Nickel plated brass
deadbolt with anti-drill steel rollers
– Sashlock bolt projection, double throw, 20mm
– Bathroom/WC lock bolt projection, single throw, 10mm
– 8 mm heavy sprung square follower
– Special bronze-bushed, self-adjusting clamp follower for rattle-free lever handles
– Maintenance-free, pre-lubricated silent-pattern latch
– Through-bolt protection sleeves for holes for standard fixings
– Technical Specification to BS EN 12209, CE marked and CERTIFIRE approved
– Non-handed
Backsets D (mm)55, 60
Forend widths (mm)20
Forend designs– Radiused– Square ends
Forend finish – Satin-brushed
stainless steel
1,5
R 0,5
R 0,5
R 1
R 1
16
5
18
19
10
9
R12
14
45
7
24
5
45
11
9
54
36
,5
82
"X"R 0,5
R 0,
5
38
R 0,5
R 0,5
9
R 40
6 DORMA
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
PREMIER SERIES - PROJECT LOCKS—
D2024
12
41
10
7
38
7
15.2
330
8
11
32
209
235
46
8598
165
21.5
63
X5.5
90º
X8
Features– Galvanised steel case,
bronze bushed– Latch bolt nickel-plated
brass– 8 mm heavy sprung square
follower– Special bronzed-bushed,
self-adjusting clamp follower for rattle-free lever handles
– Maintenance-free, pre-lubricated silent-pattern latch
– Through-bolt protection sleeves for holes for standard fixings
– Technical Specification: 115F and 116F to BS EN 12209, CE marked and CERTIFIRE approved, 117 to DIN 18251-1 Class 3
– Non-handed
Backsets D (mm)55, 60
Forend widths (mm)20
Forend designs– Radiused– Square ends (except 117)
Forend finish – Satin-brushed stainless
steel
115FMortice Latch
116FMortice Nightlatch for Europrofile cylinders Follower-to-Keyway centres 72mm
117Mortice Nightlatch with anti-thrust bolt for Europrofile cylinders Follower-to-Keyway centres 72mm
DORMA 7
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
484Mortice Rollerbolt Lock for Europrofile cylinders
Features– Galvanised steel lock case– Roller bolt of brass,
adjustable– Nickel-plated brass
deadbolt with anti-drill steel rollers
– Bolt projection, double-throw, 20 mm
– Forend in centre, non-handed
– Technical Specification: DIN 18251-1
Backsets D (mm)55, 60
Forend widths (mm)20
Forend design– Square ends
Forend finishes– Satin-brushed stainless
steel
63
13
37
72
16
5
9
6
21
,5
8
23
5
20
98
30
10,2
38
17,2
35
6,1
32
90
°9
0°
D
3
10,1
33
,7
24
25
7
1014
13
,5
8 DORMA
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
PREMIER SERIES - PROJECT LOCKS—
D20
7.5
8
6.5
6.5
15.2
38
35
330
37 20
209
235
46
8598
165
7210
38
21.5
7
63
17.2
10.2
33.7
X9
90º
X5.
5
90º
X8
3
132.0
(24)
132FMortice Deadlock for Europrofile cylinders
Features– Galvanised steel case– Nickel plated brass
deadbolt with anti-drill steel rollers
– Bolt projection, double-throw, 20 mm
– Through-bolt protection sleeves for holes for standard fixings
– Technical Specification to BS EN 12209, CE marked and CERTIFIRE approved
– Non-handed
Backsets D (mm)55, 60
Forend widths (mm)20
Forend design– Radiused– Square ends
Forend finish– Satin-brushed stainless
steel
DORMA 9
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
Features– Galvanised steel lock case– Latch bolt nickel-plated
steel– Nickel plated steel
deadbolt with anti-drill steel rollers
– 752F/532F lock bolt projection, double throw, 20mm
– 790F lock bolt projection, single throw, 10mm
– 8 mm heavy sprung square steel follower in drawn steel bushes
– Maintenance-free, pre-lubricated silent-pattern latch
– Holes for standard fixings– Technical Specification
to BS EN 12209, CE marked and CERTIFIRE approved
– Non-handed
Backset (mm)55
Forend widths (mm)20
Forend designs – Radiused – Square ends
Forend finish– Satin-brushed stainless
steel
8
15
,5–
0,5
13
13
12
8
17
46
21
,58
72
35
16
5
52
32
49
38
23
5
38
D 30
20
10
2024
752FMortice Sashlock for Europrofile cylinders Night Latch function Follower-to-Keyway centres 72mm
515FMortice Latch
532FMortice Deadlock for Europrofile cylinders
790FMortice Bathroom/WC Lock 8mm turn operated follower Follower-to-turn follower centres 78mm
1,5
R 0,5
R 0,5
R 1
R 1
16
518
19
10
9
R12
14
45
7
24
5
45
11
9
54
36
,5
82
"X"R 0,5R
0,5
38
R 0,5
R 0,5
9
R 40
10 DORMA
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
CONTRACT SERIES—
235
8
9
38
3
165
72
4621
.5
(6.3)
14
(6)
11
1415
.5
(4)
6385
98
37
10
209
17.2
33.7
10.2
X9
90º
X6
90º
X10
3
3.3
1
D
22
33
3235 8
12
20
(24)
10
7
45
7
38
180.0
180Mortice Sashlock for Europrofile cylinders 9mm square follower Night Latch Function Follower-to-Keyway centres 72mm
181Mortice Escape Lock for Europrofile cylinders 9mm square follower Follower-to-Keyway centres 72mm
EN179
182Mortice Escape Panic Lock for Europrofile cylinders 9mm split follower Follower-to-Keyway centres 72mm
EN179
Features– Galvanised steel lock case– Latch and bolt of
nickel-plated steel– Bolt projection, 180 and
181 have a 9mm Square follower
– 182 has a 9mm ‘Split’ follower
– Specifications to DIN 18250 for fire and smoke check doors
– Technical Specification: 180 to BS EN 12209, CE marked
– 181/182 to BS EN 179, CE marked and CERTIFIRE approved
Backsets D (mm)55
Forend widths (mm)20
Forend designs – Radiused– LH or RH
Forend finish – Satin-brushed stainless
steel
181 - Internal function(Emergency escape side)Operation of the lever handle retracts the latch and the projected bolt
181 - External functionKey retracts the latchbolt and deadbolt
182 - Internal function(Emergency escape side)Operation of the lever handle retracts the latch and the projected bolt
182 - External functionLever retracts the latchbolt, key retracts the deadbolt
Illustration shows LH/ISO6 lock(Mirror image applies for RH/ISO5 lock)
DORMA 11
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
MORTICE ESCAPE LOCKS—
952.0Mortice Sashlock for Europrofile cylinders Night Latch function Follower-to-Keyway centres 92mm
Features– Lock case, zinc-plated– Latch and bolt
nickel- plated– Bolt projection,
single-throw, 20 mm– Bolt with anti-saw
protection– 8 mm square follower– With night latch function– Technical Specification:
DIN 18251-2 Class 3– Non-handed
Backsets D (mm)25, 30, 35, 40, 45
Forend width (mm)24
Forend finish – Satin-brushed stainless
steel
Forend design – Square ends
Special designs– Bolt projection 15 mm
12 DORMA
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
LOCKS WITH LATCH AND BOLT—
D
15.5
17
15
6-15
48
147
168
180
178
48.5
245
92
24
8
3
90º
X10
90º
X10
X5.
4
20
3636
221
985.0
985.0Mortice Rollerbolt Lock for Europrofile cylinders
Features– Lock case zinc-plated– Adjustable roller catch and
bolt, nickel-plated– Bolt projection,
single-throw, 20 mm– Bolt with anti-saw
protection– Technical Specification:
DIN 18251-2– Non-handed
Backsets D (mm)25, 30, 35, 40, 45
Forend width (mm)24
Forend finish– Satin-brushed stainless
steel
Forend design– Square ends
DORMA 13
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
LOCKS WITH ROLLER CATCH AND BOLT—
D
8115
.5
15
48
112
105
117
8
243
90º
X10
90º
X10
X5.
4
20
36
181
157
917.0
Features– Lock case zinc-plated– Bolt nickel-plated with
anti-saw protection– Bolt projection,
single-throw, 20 mm– Technical Specification:
DIN 18251-2– Non-handed
Backsets D (mm)25, 30, 35, 40, 45
Forend width (mm)24
Forend finish – Satin-brushed stainless
steel
Forend design – Square ends
917.0Mortice Deadlock for Europrofile cylinders
14 DORMA
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
DEADLOCKS—
D
14
15
11
154
170
128
108.
510
0.5
87.5
54.5
14
24
8
3
90º
X10
34
X5.
4
19
936.0
936.0Mortice Latch
Features– Lock case zinc-plated– Latch nickel-plated– 8 mm square follower– Technical Specification:
DIN 18251-2– Non-handed
Backsets D (mm)25, 30, 35, 40, 45
Forend width (mm)24
Forend finish – Satin-brushed stainless
steel
Forend design – Square ends
DORMA 15
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
LATCH LOCKS—
DORMA UK LimitedWilbury WayHitchinHertfordshireSG4 0AB
Tel: 01462 477600Fax: 01462 477601E-mail: [email protected]
DORMA Ireland LimitedPO Box 1050MaynoothCo. Kildare
Tel: 01 295 8280Fax: 01 295 8284E-mail: [email protected]