the recognized leader for waterstops for …...typical structures requiring waterstops include:...

Typical Structures Requiring Waterstops Include:

◆ Dams, locks, canals, water reservoirs and aqueducts◆ Water and waste water treatment facilities◆ Primary and secondary containment structures◆ Culverts and tunnels◆ Storage Tanks◆ Retaining walls◆ Bridge and deck abutments◆ Foundations◆ Slabs-on-grade◆ Parking garages

3400 Tree Court Industrial Boulevard, St. Louis, Missouri 63122Phone: 800-325-9504 or 636-225-9400Fax: 800-551-5145 or 636-225-2049Greenstreak.com

The Recognized Leader for

WATERSTOPS FOR CONCRETEConcrete structures are only as watertight as the waterstops thatjoin them. Greenstreak waterstops stop leaks before they start...in the joints of concrete structures.

Since 1950, Greenstreak has served the general and architecturalconcrete construction industry. Innovation, engineering and quality craftsmanship are combined to produce products of choicefor the industry’s owners, designers and contractors.

Greenstreak maintains its position of industry leadership byresponding to the unique needs of our customers. Greenstreak’sdedicated technical and customer service staffs are active participants in the concrete industry to take advantage of thelatest technological advances, communicate with our marketand analyze trends.

Centrally located, Greenstreak products are readily availablethrough a dedicated network of Concrete Forming andAccessory Distributors both nationally and internationally.

Flood Wall

Water Treatment Plant

Lock and Dam

WATERSTOP BASIC USE

Embedded in concrete, across and/or alongthe joint, waterstops form a watertightdiaphragm that prevents the passage offluid through the joint.

SUGGESTED WATERSTOPDESIGN CHECKLIST

◆ Determine structure type◆ Verify chemical containment

requirements (if any)◆ Verify hydrostatic head pressure

requirements◆ Determine joint type and joint

movement requirements◆ Verify joinery details of dissimilar or

non-symmetrical waterstop profiles(consider using one profile throughoutto simplify intersections)

◆ Specify ribbed profile for best watersealing performance

◆ Specify type and size (by product number, if possible)

◆ Specify factory fabrications of intersec-tions and heat welded field butt joints

◆ Specify method for securing waterstopin position (hog rings, grommets, etc.)

PVC WATERSTOP

◆ The industry standard◆ Broadest design selection◆ Formulated and compounded by

Greenstreak◆ Manufactured by Greenstreak from

only prime resins and all virgin raw materials

◆ Great inherent elasticity◆ Resistant to many waterborne chemicals◆ Heat weldable◆ Will not discolor concrete or produce

electrolytic action◆ Suitable for above or below grade

applications

Physical properties

All Greenstreak PVC waterstops are speciallyformulated and manufactured to meet orexceed the industry’s standard specifications.

Note: Greenstreak conducts regular testingof materials. Refer to Suggested MasterSpecification for current values.

Independent laboratory tests are availablefor the following applicable standards:

◆ Corps of Engineers CRD-C572-74◆ Bureau of Reclamation C902◆ CH2M Hill◆ Montgomery Watson, Inc.◆ Various State Highway and/or Public

Works Department Standards

Installation aids for PVC waterstops

Greenstreak offers various features to economically assist and promote properinstallation of PVC waterstops. Waterstopsmust be securely positioned in the forms toprevent deflection or misalignment duringconcrete placement. This is achieved bytethering the outer flanges of the waterstopto the adjacent reinforcing steel.

The following features are offered toassist this method of installation:

◆ Tie-Right - most PVC shapes are avail-able with factory applied hog rings

◆ Punched Flanges - most ribbed shapesare available with punched flanges

◆ Grommets - selected shapes are avail-able with brass grommets

PVC Waterstop fabrications

PVC waterstop splices, directional changesand intersections are critical components ofa quality installation. Specifications requir-ing factory made fabrications are stronglyrecommended. Greenstreak can providehomogeneous directional changes andintersections, leaving only the less difficultstraight splices to be welded in the field.

SBR AND NEOPRENE RUBBER WATERSTOPS

Greenstreak offers SBR and Neoprene waterstops for applications requiring thephysical properties of rubber. These water-stops are manufactured to meet the Corps ofEngineers and The Bureau of Reclamation’sspecifications for rubber waterstops.

C A L L G R E E N S T R E A K ’ S T E C H N I C A L S E R V I C E D E PA R T M E N T F O R A S S I S TA N C E W I T H

Greenstreak PVC Waterstop Physical Properties

PROPERTY TEST NOMINAL*ASTM VALUE

Water absorption *D570 0.02%Tear resistance *D624 225 lb./in.Ultimate Elongation *D638 300% minTensile strength *D638 2000 psi min.Low temperature Passed @brittleness *D746 -35°F / -37°CStiffness in flexure *D747 700 psiSpecific gravity *D792 1.40Hardness Shore A15 *D2240 79±3Accelerated CRD-extraction C 572• Tensile strength 1850 psi• Elongation 350%

Effect of Alkali• weight change +0.10%• hardness change +1 point

2

Tie-Right, Grommeted, Punched Flanges

Rubber FittingsSplices, directional changes and intersec-tions are achieved with premolded unions,fittings and a rubber adhesive kit.

HYDROTITE®

Hydrotite is a world renowned hydrophilicwaterstop. Composed of modified chloro-prene rubber, Hydrotite expands up to 8times its original volume when exposed to water. This expansion creates an effective compression seal within joints of limited movement.

Hydrotite is used extensively in sealingconcrete construction and control joints,pipe penetrations, precast concrete segments, tunnel lining segments and for repair of existing joints. Hydrotite features include:

◆ Volumetric expansion up to 8:1◆ Durable chloroprene rubber composition◆ Delay coating to protect fresh concrete◆ Composite profiles; controls direction

of expansion◆ Eliminates special form work◆ Installs quickly◆ Easy to splice

LEAKMASTER®

Leakmaster is a single componenthydrophilic urethane sealant/adhesive.Expansion ratio of 2:1 makes Leakmaster a natural choice in sealing irregular jointsand penetrations; as well as an aid in theinstallation of Hydrotite profiles.

SWELLSTOP TM WATERSTOP

A flexible butyl rubber and swellable clay waterproofing compound that swellsupon contact with water to form a longlasting compression seal in non-movingconcrete joints.

Swellstop requires a 2" minimum clear coverage from the face of the concrete.

Applications include:

◆ Foundation walls and slabs◆ Slabs-on-grade◆ Precast wall panels◆ Manholes◆ Pipe connections◆ Box culverts ◆ Utility and burial vaults◆ Wet wells◆ Portable water tanks

LOCKSTOP TM WATERSTOP

Similar in appearance to Swellstop, but different in nature. Lockstop is a single-component self-sealing mastic waterstopwhich prevents moisture from penetratingnon-moving concrete joints.

Typical construction joint applicationsinclude:

◆ Foundation walls and slabs◆ Slabs-on-grade◆ Manholes◆ Pipe connections◆ Retaining walls◆ Tunnels◆ Culvert◆ Storage tanksNote: Swellstop and Lockstop are for non-working joints only.

Greenstreak Rubber WaterstopPhysical Properties

*ASTM Styrene HighProperty Test Butadiene Tensile

Method (SBR) Neoprene**Tensile Strength

(PSI min) *D412 2,500 2,500

Tensile Strength @ 300% Modulus *D412 1,150 1,150(PSI min)

Ultimate Elongation, *D412 450 450(% min)

Durometer, Shore A (+/- 5) *D2240 65 65

Water Absorption, 7 Days CRD 5 15at 70°C % Weight C575Change (% max)

Compression Set, *D395 30 3022 hr. @ 70°C % of Original Deflection (max) (Method B)

Accelerated Aging, *D57296 hrs. @ 70°C

% of Tensile Strength before 80 80aging (min)

% of Elongation 80 80before aging (min)

Ozone Resistance, 7 Days at 50PPHM *D1149 No No@ 38°C, 20% Elong. Cracks Cracks

**Provides maximum resistance to ozone, sewage, oil and solvents

3

See Hydrotite Catalog


M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4

Contraction (Control) JointContraction joints are designed planes of weakness to control thelocation of cracks due to shrinkage of concrete.

Expansion (Isolation) JointExpansion joints separate or isolate abutting concrete structures(walls, slabs, footings columns) protecting them from compressive

stresses that may develop due to thermal expansion, settlement,creep, live load deflections, drying shrinkage or crush. Differentialmovement at these joints can be both lateral and transverse.

Construction JointConstruction joints are determined by interruptions in the place-ment of concrete.

TYPES OF CONCRETE JOINTS

WATERSTOPS FOR WORKING JOINTSWATERSTOPS FOR NON-WORKING JOINTS

Ribbed with Centerbulb The most versatile type of waterstop available. The centerbulb accommodates lateral, transverse and shear movement. Larger centerbulbs accommodate larger movements.

Dumbbell with Centerbulb Accommodates lateral, transverse and shear movements. Ribbed shapes provide better sealing characteristics.

*Tear Web Accommodates large movements. Upon joint movement the tear web ruptures allowing the U-bulb to deform without putting the material in tension.

Ribbed Flat Construction or contractionjoints where little or no movement is expected. Ribbedshapes provide a better sealthan dumbbell shapes.

Dumbbell Construction or contraction joints where little or nomovement is expected.

Base Seal Ideal for slab-on-grade jointsor walls which will be back-filled. Easy to form.

*Labyrinth Primarily used in vertical jointswhere little or no differential movement is expected. Does not require split forming and adds a key to the joint. Difficult to use in horizontal joints.

*Split Waterstop Available in ribbed with center-bulb and dumbbell shapes. Eliminates the need for split form bulkhead.

Hydrotite Used in joints of limited move-ment, Hydrotite expands withwater contact to create a com-pression seal. Installs quickly.

Swellstop Used in precast and cast-in-place below grade applications.Swellstop is intended for non-moving joints only.

Lockstop Provides a watertight, masticbond to concrete surfaces innon-moving joints.

*Some directional changes or intersections may not be practical or possible with this style of waterstop. Consult Greenstreak’sTechnical Service Department for the suitability of this style waterstop for your specific application.

OR

4

RETROFIT APPLICATIONS

Retrofit System

Hydrotite/Leakmaster

Seals joints wherenew constructionmeets existing struc-ture. Eliminates theneed to saw cut andgrout in a conven-tional waterstop.

Used in repair ofexisting joints,Hydrotite reducesstress on sealants.Also use where joining new concreteto existing and little movement is expected.


WATERSTOP PROFILES

Once you have determined the joint type, the magnitude of the differential movements and the type of waterstop to meet projectrequirements, you must select a specific profile from the multitudeof shapes. The following are a few of the most commonly specified profiles.

GREENSTREAK® waterstop is manufactured in widths from 4" to 12"and in thicknesses from 1/8" to 1/2". Over 110 different sizes and

profiles are available to meet the most demanding requirements.

Should your project require a special shape, GREENSTREAK offers the world’s broadest line of waterstop sizes and profiles.Custom orders will be considered. A Waterstop Profile supplementillustrating all of the profiles is available upon request. For a copy,call GREENSTREAK at (800)325-9504.

PVC SHAPES

9"228.6mm

3/8"9.5mm

1/8"3.2mm 5/8"

15.9mm

GroutRibs25 4.5 7 3.5 3

5550250

BrassEyelet

GroutRibs20 4 6 3.5 3

4040200

BrassEyelet

3/8"9.5mm

1/8"3.2mm1/4"

6.4mm

9"228.6mm

3/8"9.5mm

1/4"6.4mm

1/8"3.2mm

6"152.4mm

3/8"9.5mm

1/8"3.2mm 5/8"

15.9mm

6"152.4mm

6

1/2" ID & 1" OD12.7mm ID & 25.4mm OD

3/8"9.5mm

1/8"3.2mm

9"228.6mm

1/4"6.4mm

3/16"4.8mm

7/8" ID & 1-1/2" OD22.2mm ID & 38.1mm OD

9"228.6mm

3/8"9.5mm

3/8"9.5mm

3/4" ID & 1-1/4" OD19mm ID & 31.8mm OD1/4"

6.4mm

9"228.6mm

1/8"3.2mm

1/4" ID & 3/4" OD6.4mm ID & 19mm OD

1/8"3.2mm

9"228.6mm

3/16"4.7mm

3/8"9.5mm(1/4" opt.)

55 3

3.574.525

25050

17 ID BrassEyelet

6"152.4mm

5/16" ID & 7/8" OD8mm ID & 22.2mm OD3/8"

9.5mm1/8"

3.2mm 5/8"15.9mm

1/4" ID & 11/16" OD6.4mm ID & 17.5mm OD

6"152.4mm

1/8"3.2mm

3/16"4.7mm

3/8"9.5mm

1/4" ID & 5/8" OD6.4mm ID & 15.9mm OD

6"152.4mm

3/16"4.7mm

1/8"3.2mm

1/8"3.2mm

3/4"19mm

3/8"9.5mm

5/16" ID & 15/16" OD8mm ID & 23.7mm OD1/2"

12.7mm

6"152.4mm

1/8"3.2mm

1/4" ID & 3/4" OD6.4mm ID & 19mm OD

4"101.6mm

3/16"4.7mm 1/8"

3.2mm

3/16" ID & 3/8" OD4.7mm ID & 9.5mm OD

4"101.6mm

3/16"4.7mm

203mm8"

6.4mm ID & 12.7mm OD1/4" ID & 1/2" OD

5mm13/64"

1/2" ID & 1-1/4" OD12.7mm ID & 31.8mm OD

12"304.8mm

1/2"12.7mm

1"25.4mm

7/8"22.2mm

7/8" ID & 1-1/2" OD22.2mm ID & 38.1mm OD1/4"

6.4mm1/2"

12.7mm3/16"4.7mm

12"304.8mm

7/8" ID & 1-3/8" OD22.2mm ID & 34.9mm OD

7/8"22.2mm

3/8"9.5mm

9"228.6mm

5

Ribbed646 STD. WT. 2.37 lbs/ft 3.53 Kg/m HEAD PRESS. 175' 523 KPa

957 STD. WT. 1.75 lbs/ft 2.60 Kg/m HEAD PRESS. 150' 448 KPa





Ribbed With Centerbulb









Ribbed With Centerbulb






713 STD. WT. 3.60 lbs/ft 5.36Kg/m HEAD PRESS. 225' 672 KPa


.984"25mm

.177"4.5mm

.275"7mm

9.842"250mm

.787"20mm

2.165"55mm

.137"3.5mm

.118"3mm

1.574"40mm

.157"4mm

.236"6mm

7.874"200mm

1.574"40mm

.137"3.5mm

.984"25mm

.118"3mm 1.968"

50mm

.177"4.5mm

.275"7mm

.137"3.5mm

.669" ID17mm ID

2.165"55mm

9.842"250mm

.118"3mm

1.986"50mm

Montgomery– Watson

Montgomery– Watson

CH2M-Hill Montgomery– Watson

Bureau of Reclamation COE

CH2M-Hill Montgomery– Watson

Bureau of Reclamation


9"228.6 mm

1/2" ID x 7/8" OD12.7 mm x 22.2 mm

3/8" 9.5mm 1/4"


PVC SHAPES

GroutRibs

25

10230

3/4"19mm

3/8" 9.5mm

6"152.4mm

7

3/4"19mm3/8"

9.5mm

9"228.6mm

3/8"9.5mm

1"25.4mm

9"228.6mm

5/8"15.9mm1/4"

6.4mm

6"152.4mm

3/8"9.5mm

3/16"4.7mm

6"152.4mm

3/8"9.5mm

3/16"4.7mm

4"101.6mm

20

10 13 ID & 23 OD 2.55

260

BrassEyelet

3/8"9.5mm

1"25.4mm

9"228.6mm

3/4" ID &1-1/2" OD19mm ID & 38.1 OD

7

2" ID & 2-3/4" OD50.8mm ID & 69.8mm OD3/8"

9.5mm

15/16"23.7mm

9"228.6mm

6"152.4mm

3/4" ID & 1-1/8" OD19mm ID & 28.6 mm OD

1/4"6.3mm

3/8"9.5mm

9"228.6mm

5/8" OD15.9mm OD

3/32"2.4mm

3/16"4.7mm

3/8"9.5mm

3/16"4.7mm

3/4" OD19mm OD

3/8"9.5mm

9"228.6mm

3/8"9.5mm

5/8" OD19mm

3/32"2.4mm

3/16"4.7mm6"

152.4mm

5/8" OD15.9mm OD

3/16"4.7mm

3/32"2.4mm

6"152.4mm

3/16"4.7mm

4"101.6mm

3/32"2.4mm

1/16"1.6mm

3/8"9.5mm

3/8"9.5mm

3/4"19mm

6"152.4mm 3/16"

4.7mm

3/8"9.5mm 3/8"

9.5mm

3/4"19mm

9"228.6mm 3/16"

4.7mm

3-1/4"82.6mm

1-5/8"41.3mm

7

3/16"4.7mm

1-5/8"41.3mm

7

3/16"4.7mm

4-7/16"112.7mm

3/4"19mm

1/8"3.2mm

6"152.4mm

3/8"9.5mm

1/8"3.2mm 3/8"

9.5mm

9"228.6mm

3/4"19mm

3/8"9.5mm

9"228.6mm

3/4"19mm

2-1/2"63.5mm

1-1/8"28.6mm

9/16"14.3mm1/8"

3.2mm

6"152.4mm

1-3/16"30.2mm

1/8"3.2mm

1-5/8"41.3mm

1/2"12.7mm

1/8"3.2mm 9/16"

14.3mm

6"152.4mm

5/32"3.9mm3/4"

19mm

7

9"228.6mm

5/32"3.9mm

9"228.6mm

3/4"19mm

5/32"3.9mm

17"431.8mm

7

1/2"12.7mm

8"203.2mm

3-1/2"88.9mm

9"228.6mm3/4"

19mm5°

1/8"3.2mm

3-1/8"82.6mm

5-1/4"133.4mm

3/4"19mm

1/8"3.2mm

1/8"3.2mm

6

Dumbbell








Dumbbell With Centerbulb





Split Flange








Labyrinth



Tear Web




Base Seal





777 STD. WT. 2.75 lbs/ft 4.09 Kg/m SlabSpan

Special Shapes609 STD. WT. 2.92 lbs/ft. 4.35 Kg/m of Retrofit System

775 STD. WT. 4.64 lbs/ft 6.91 Kg/m

792 STD. WT. 1.10 lbs/ft 1.64 Kg/m

Available as a system:• Waterstop• S.S. Batten Bar

2 / ft. of waterstop• S.S. Anchor Bolt

4.2 pcs. / ft. of waterstop

• Epoxy Gel

.984"25mm

9.055"230mm

.393"10mm

.393"10mm

.196"5mm

.098"2.5mm

.787"20mm

.511" ID & .905 OD 13mm ID & 23mm OD

10.236"260mm

17"431.8mm NOT TO SCALE

5/32"3.9mm

New York D

TexasHwy.

Type A

1/8" 7/16"7/16"

7"177.8mm

3.2mm11.1mm

11.1mm


TexasHwy.

Type B

W1–2 Calif.


REBAR

NEW STRUCTURE

1/2"

HOG RING

9"

9"228.6 mm

SERRATED BASE

EXISTING STRUCTURE

3/8" EXPANSIONANCHOR BOLT

1/4" x 2" TYPE 304 SSTBATTEN BAR, PREDRILLED

6"

1/2"

667 STD. WT. 8.27 lbs/ft. 12.31 Kg/m of Retrofit System

Available as a system:• Waterstop• S.S. Batten Bar

20 ft. required per 10 ft. sectionAvailable predrilled on 6" or 8" centers

• S.S. Anchor Bolt6" predrilled bars require36 per 10 ft. section8" predrilled bars require30 per 10 ft. section

RUBBER SHAPES

PVC FABRICATIONS RUBBER FITTINGS

STRIP APPLIED


3/4"19mm

3/8" 9.5mm

6"152.4mm

7

3/4"19mm

3/8" 9.5mm

6"152.4mm

73/4"19mm3/8"

9.5mm

9"228.6mm

3/4"19mm3/8"

9.5mm

9"228.6mm

6"152.4mm

3/4" ID & 1-1/8" OD19mm ID & 28.6 mm OD

1/4"6.3mm

5/8"15.9mm

6"152.4mm

3/4" ID & 1-1/8" OD19mm ID & 28.6 mm OD

1/4"6.3mm

5/8"15.9mm

3/8"9.5mm

1"25.4mm

9"228.6mm

3/4" ID &1-1/2" OD19mm ID & 38.1 OD

7

3/8"9.5mm

1"25.4mm

9"228.6mm

3/4" ID &1-1/2" OD19mm ID & 38.1 OD

7

3/4"19mm

S

1" 25.4mm

3/4"19mm

S

1" 25.4mm

Flat Tee Flat Ell

Flat Cross

Vertical Cross Vertical Tee

Vertical Ell

Vertical Cross

Vertical Ell Union

Vertical “T”

PVC Intersections Rubber Fittings (Vertical and Flat)

*Consult Greenstreak for special fabricationsyour project may require

7

Note: Adhesive available for bondingrubber intersections (unions).

Neoprene Rubber





Styrene Butadiene Rubber (SBR)





Swellstop594 STD. WT. 0.55 lbs/ft 0.81 Kg/m

Lockstop595 STD. WT. 0.48 lbs/ft 0.71 Kg/m


3/8"9.5mm

3/4" 19mm

596 STD. WT. 0.22 lbs/ft 0.33 Kg/m

Swellstop II

3400 Tree Court Industrial Boulevard, St. Louis, Missouri 63122Phone: 800-325-9504 or 636-225-9400

Fax: 800-551-5145 or 636-225-2049Greenstreak.com

[email protected] in the U.S.A.03/08

LIMITED WARRANTY: GREENSTREAK warrants to the Buyer that this prod-uct will be free of defects and will perform as represented in writing subject tothe (2) following conditions:First, the application of the product and the concrete construction practices usedin the application are in accordance with GREENSTREAK’S Recommendations.Second, the Buyer has selected the proper product for the specific applicationrequired. GREENSTREAK disclaims any responsibility for the selection of a par-ticular waterstop product. Product selection is the sole responsibility and deci-sion of the buyer. The suitability of any material for a specific application requir-ing fluid resistance is best determined by specific testing for the application.GREENSTREAK urges the Buyer to conduct its own testing.Any information supplied by GREENSTREAK with respect to its products isbelieved to be correct. GREENSTREAK makes no representations or warranties,express or implied, as to the accuracy or completeness of such information orthe use of such information for a particular purpose. GREENSTREAK has not

performed any tests. Any test data has been prepared by independent commer-cial laboratories.Because GREENSTEAK has no control over either the application or the selec-tion of its products, GREENSTREAK’s Limited Warranty is as follows:The exclusive remedies of the Buyer and the limit of the liability ofGREENSTREAK from any and all losses or damages resulting fromthe use of this product (including claims based on contract, negli-gence, strict liability, or otherwise) shall be either the full refund ofthe purchase price to Buyer of this product or the replacement ofthe quantity of product purchased by theBuyer - at the election of GREENSTREAK. In no event shall GREEN-STREAK be liable for any incidental or consequential damages. TheBuyer and all users of this product are deemed to have accepted theterms of this Limited Warranty which may not be varied in any wayby any verbal or written agreement.

THE WORLD’S NUMBER ONE INJECTION HOSE SYSTEMFUKO is a specially designed and patented solid core PVC InjectionHose System which is installed in concrete joints to waterproof and seal any cracks or voids in the joint area. The FUKO System seals joints watertight and offers a complete maintenance program if leakage appears in the future. When Portland Cement, MicrofineCement, or Duroseal Injection Resins are selected, the FUKO System can be used for multiple reinjections – a significant advantage over any other hose system available.

A suitable injection material must be selected according to the requirements of the joint. BBZ offers a variety of injection materials,including Multigel 850. Contact BBZ/Greenstreak for recommenda-tions regarding injection materials.

Multigel 850 is a solvent-free acrylate resin, which swells up to75% on contact with water. NSF approved Multigel 850 is a lowviscosity resin, which penetrates microfine cracks and capillaries toseal them permanently. It is resistant to acids, lyes and many solventsand fuels. Equipment and tools contaminated with Multigel 850 canbe easily cleaned with water.

FUKO Hose

Injection Material

Cross section of completed injection

DUROJECT for Single Injections Duroject is an economical injection hose for planned sealing of construction joints. Durojectenables a controlled injection of the construction joint and thus reliable waterproofing. It isdesigned to deliver resin and microfine cements in a single injection. It is not for applica-tions that may require subsequent injections.

BBZ, USA is a subsidiary of Greenstreak Group, Inc.

the recognized leader for waterstops for …...typical structures requiring waterstops include:...

Documents