the safe transfer of pressurized gas
DESCRIPTION
The Safe Transfer of Pressurized Gas. Collect the Necessary Tools and Equipment. Safety Glasses for EVERYONE SCUBA Tank filled to 3000 psi Fill Station Storage Tank and Regulator Adjustable Strapping. SCUBA Certification Limited Capacity. SCUBA Tanks. Lightweight. - PowerPoint PPT PresentationTRANSCRIPT
The Safe Transferof
Pressurized Gas
Collect the Necessary Tools and Equipment
• Safety Glasses for EVERYONE• SCUBA Tank filled to 3000 psi• Fill Station • Storage Tank and Regulator • Adjustable Strapping
SCUBA Tanks
Portable
Readily Available
Inexpensive
Lightweight
•SCUBA Certification
•Limited Capacity
Fill StationsThis is a commercially available fill station manufactured for paintball enthusiasts.
Fill StationsThis is a custom built fill station fabricated by a local welding supply company from off the shelf parts.
Note: All parts rated at 3000 psi
Tank and RegulatorThis is a 47ci Aluminum paintball tank with an Air America Tobor™ regulator that has been modified to conform to the BBIQ Technical Rules and Regulations
Before Every Fill…
• Put on Safety Glasses• Check the Valve and O-ring on the SCUBA Tank.
Replace defective O-Rings. Do not use a tank with a damaged valve surface.
Be SafeInspect the Equipment Every TimeAll the Time
Prevent Serious Accidents
Always Secure High Pressure Storage Bottles to Rigid Structures
A Busted Valve Will Turn This Tank Into a Rocket Capable of Piercing the Wall of a Building.
Attach the HPA Storage Tank to the Fill Station
Check the HPA Storage Tank Fittings for Visible Damage
Be Certain the HPA Storage Tank Valve is Closed
Respect the Quick Connect
Make certain the connection is secure and the male and female ends have engaged.
Test the connection by tugging on the tank
Ready To FillCheck the Setup
Check the Gages
Check the Connections
Fill the Tank S-L-O-W
Slowly Open the Valve on the SCUBA TankWatch the GagesFeel the Tank TemperatureTake Your Time
CAUTIONFollow This Procedure to Remove
the Tank
1.) Close the SCUBA Tank Valve
Note: The Fill Station and Tank connection will remain pressurized
2.) Open the Fill Station Bleed Valve
Note: The Tank does not empty because the male Quick Connect fitting is a one way check valve.
CongratulationsYou now have approximately 10 Watt Hours of energy available.
Be a great engineer.
Use it wisely.
Low PressureApprox. 1Mpa High
Pressure2200 psi