the shower pan - quickdrain · more than a linear drain the shower pan solution ada shower...

MORE THAN A

LINEAR DRAIN

THE

SHOWER PAN SOLUTION

ADA Shower Specifications March 2015

ABOUT QUICKDRAIN

QuickDrain USA is a premier manufacturer of stainless steel and PVC, low-profile linear drains and pre-sloped,

site-adjustable systems for showers and wet areas. All of the company’s products are designed to meet Uniform

Plumbing Code and International Plumbing Code standards and approvals.

QuickDrain USA manufactures and ships each drain from

Denver, CO and has established its corporate headquarters in Frisco, CO since 2008. In addition,

QuickDrain USA is a woman-owned business.

The company prides itself on offering unparalleled technical support from early design drawings to on-site

mock-up installations facilitated by our technicians.

1

METHODOLOGY

The concept of a linear drain is as old as Ancient Rome. The only efficient way to drain a wet area with no design

compromise is to slope one plane to one line!

QuickDrain USA has perfected the linear drain, bringing it into the 21st century using modern fabrication techniques and materials. With our stainless steel and PVC drains and adjustable height spacers, we have taken this time-tested

concept to a new level of quality, efficiency and ease. There is no longer need to create a custom slope from every direction to one point, as with a traditional center

drain.

QuickDrain should be positioned parallel to the entry to the shower area so that the shower floor has just one flat surface, providing a stable and consistent flooring surface

for wheelchairs. In addition, the drain sits in a shallow trough cut into the subfloor thus eliminating the need to

recess the entire shower floor.

Most importantly, our patented Sure Flow System™ ensures vertical surface to vertical surface coverage and

100% water evacuation, which translates into less standing water, less bacteria, and less cleaning!

2

LINEAR DRAINS

QuickDrain USA’s series of stainless steel and PVC, low-profile linear drains all have internally pitched, 1” deep

and 1” wide troughs, and come in a variety of lengths and outlet configurations.

All ProLine drain bodies are made of 18 Gauge 316L

stainless steel, and come in 13 standard sizes, or

custom sizes ranging from 10” to 100” and a variety of waste outlet configurations.

All ShowerLine linear drain bodies are made from PVC. Drain bodies are available in

four outlet configurations: 2” vertical, 2” side waste

(90°), 1.5” vertical, and 1.5” side waste (90°).

3

COVERS

QuickDrain USA offers some of the industry’s most stylish cover designs. All covers are a slim 1.5” and comprised of 18 Gauge 304 Stainless Steel. Available in three styles and

a choice of brushed or polished stainless finish, ProLine and ShowerLine covers for ADA and barrier-free showers

are designed for incomparable style and durability.

Stream* Cosmo*

Lines*

* Approved for ADA Accessible

4

SHOWER PANS

QuickDrain USA offers easy-to-install, complete pre-sloped shower pan kits that can be easily cut with a utility

knife for use with our ProLine and ShowerLine series drains.

The company’s polypropylene honeycomb

slope and flat panel materials have a

compression strength of 230PSI.

All pre-sloped ShowerLine pan materials are

comprised of extruded rigid PET plastic foam. This

material has a compression strength of 145PSI, is non-reactive, economical, and

shatterproof. The PET foam is 100% post-

consumer recycled material.

5

WATERPROOFING

QuickDrain USA linear drains are also compatible with a variety of waterproofing types – the two most common

being topical sheet and liquid applied.

Liquid waterproofing kits include curb covers, outside corners, inside corners and reinforcement tape specially

made from non-woven polyester, and appropriate

for use with any liquid waterproofing.

6

WARRANTY

QuickDrain USA low-profile linear shower drains are intended for use with tile showers. Both the shower drains

and the liner must be installed in accordance with the manufacturer’s published instructions and the applicable

codes.

Ceramic Tile must comply with ANSI A137.1. Underlayment must comply with the applicable code or ANSI A118.10. the company’s drains are in compliance with the 2009

International Residential Code, the International Plumbing Code and the Uniform Plumbing Code.

When installed in accordance with our specifications and

in conjunction with local building codes, our drains carry a lifetime guarantee and warranty.

7

PO TERMS & LEAD TIMES

• Please Submit PO’s to us via e-mail: [email protected] or via fax: 866-357-8502.

• Orders received one business day will be processed the following business day – Exception: If you request NDA for a small shipment, we will ship your order same day, as long as we have received the PO by 1 p.m. MST. Typical lead times on large quantity orders are 3-4 weeks.

• Be certain that the freight terms show a form of prepaid & charge unless you are giving us a FedEx or UPS account number to use for Collect or Third Party shipments. FFA is $10K+ (net) with some qualifications.

• If the pricing on your PO is HIGHER than your correct pricing, we will automatically charge the correct, lower pricing – without getting a corrected PO from you. ***If this is not agreeable with your accounts payable, please advise us in writing: [email protected] *** If the pricing on your PO is LOWER than your correct pricing, we do require a corrected PO & the order will be held until we receive the corrected PO.

• Be certain the payment terms show correctly on your PO – we WILL require a revised PO if they are not correct.

• We DO allow direct shipments (to your customer) – there is no additional fee for direct shipments.

• Please note your Estimate & or Project name on the Purchase order to ensure any special discounts are given and honored.

• With each drain body on order, we ship the correct amount of spacers, (1) 2” to 2” no-hub coupling (only with ProLine orders) & (2) EX4SS at no charge; if your customer needs a 2” to 1.5” no-hub coupling, there is a charge for that coupling. Our sink drains do not ship with a coupling.

• Orders for custom items (ProLine) should not be submitted prior to obtaining an estimate from us. Additionally, referencing the estimate on the PO is helpful. Remember that we always need a signed drawing to accompany a PO for a custom drain body(ies). We provide the drawing with our estimate. Normal lead time for custom drains is 5-6 weeks. Please contact us for a lead time on large quantity custom orders.

• If you include your e-mail on the PO, you will receive an e-mail with the shipment’s tracking number(s).

• Once an order is shipped & received (by you or your customer) it must be opened & reviewed for order accuracy, completeness & in-transit damage within 72 business hours of receipt. Please notify us within 72 business hours of any issues.

• Please contact us at (866) 998-6685 for our return policy.

8

mailto:[email protected]

CONTACTS

Pricing & General Inquiries:

Lindsay Bell – [email protected] Phone – 866-998-6685 Ex. 305

Direct: 970-484-9495

Megan Kennedy – [email protected] Phone – 866-998-6685 Ex. 309

Commercial Sales:

Jeff Kelley (VP of Comm’l Sales) – [email protected]

Mobile – 303-847-7812

Commercial Technical Support:

Josef Erlebach (VP of Tech Support) – [email protected] Mobile – 970-389-6582

Carl Coy (Healthcare Tech Support) – [email protected]

Phone – 866-998-6685 Ex. 306 Mobile – 970-310-3833

9






ADA SHOWER SPECIFICATIONS

ProLine Drain & Assembly Kit ShowerLine Drain & Assembly Kit

Trough Extensions Quick Slope Panels

Liquid Waterproofing Kit

10

COVER SPECIFICATIONS

Stream Cosmo Lines

Spacers

18

INSTALLATION INSTRUCTIONS

ProLine at Entrance with Liquid Waterproofing ProLine at Back Wall with Liquid Waterproofing

ShowerLine with Liquid Waterproofing

23

CODE APPROVALS

ICC-ES PMG Listing CUPC Approval

27

the shower pan - quickdrain · more than a linear drain the shower pan solution ada shower...

Documents