the workeval equipment - the blankenship workevalblankenshipworkeval.com/theworkevalcatalog.pdf(cv)...

THE WORKEVAL

EQUIPMENT

THE BASIC WORKEVAL SYSTEM

THE CLASSIC WORKEVAL SYSTEM

THE ULTIMATE WORKEVAL SYSTEM

Phone: 478-475-9393 ♦ Fax: 478-475-9353 ♦ E-Mail: [email protected] ♦ Web: www.blankenshipworkeval.com

© Blankenship, Inc., Macon, GA, 2014

BLANKENSHIP


The Blankenship WorkEvalTM is a unique method of evaluating and documenting an injured worker’s ability and willingness to work, and it requires specialized equipment to accomplish its goals. We recommend three Blankenship WorkEvalTM Equipment Systems; The Basic WorkEvalTM System, The Classic WorkEvalTM System and The Ultimate WorkEvalTM System. These systems are listed below and the vendors for these systems are also provided.

THE BLANKENSHIP WORKEVALTM

JTECH Commander ECHOTM Console

JTECH Commander ECHOTM Wireless Static Force Gauge

JTECH Commander ECHOTM Wireless Hand Grip Gauge

JTECH Commander ECHOTM Wireless Pinch Gauge

JTECH Commander ECHOTM Wireless Muscle Testing Gauge

JTECH Commander ECHOTM Wireless Dual Inclinometer or the JTECH Dualer IQ ProTM Digital Inclinometer

JTECH Commander ECHOTM Downloader Software

JTECH Mobile Static Lifting System

JTECH JobSimTM Basic Dynamic Lifting System

Bailey Dynamic Push-Pull SLED

Bailey 5-Box Material Handling System

Bailey High Rolling Weight Cart

Bailey Low Rolling Weight Cart

Hausmann Carry-All Weight Box

Purdue Pegboard Fine Motor Skills Test: Lafayette Instruments

Minnesota Manual Dexterity Test: Lafayette Instruments

Cardio Pulse Hand-Held Heart Rate Monitor: VersaClimber

Optional Chest Lead Heart Rate Monitor

Wrist-Type Blood Pressure Monitor

Arm-Type Blood Pressure Monitor with Extra Large Cuff

Musculoskeletal Evaluation Instruments

Buck, KaWe or Babinski Reflex Hammer

Two-Point Discrimination Gauge

C-128 Tuning Fork

4-Goniometers

Tape Measure

Disc Weights, 400 lb in 2.5, 5 and 10 lb Discs

Vertical Climbing Ladder Attached to a Wall

Quality Digital Camera, Digital Camcorder and Tripod

Complete Computer System Notebook Computer with 500 GB HD, 8 GB Memory, MS Work, MS Publisher, 22 in. External Monitor, Wireless

Mouse, Two 1-2 TB External Hard Drives for Backups

The Blankenship WorkEvalTM Home Study System

JTECH TrackerTM Version 5 Software

JTECH Tracker Freedom® Static Force Gauge

JTECH Tracker Freedom® Hand Grip Gauge

JTECH Tracker Freedom® Pinch Gauge

JTECH Tracker Freedom® Muscle Testing Gauge

JTECH Tracker Freedom® Dual Inclinometer

JTECH Commander ECHOTM Wireless Static Force Gauge and JTECH Commander ECHOTM Console


THE BASIC WORKEVALTM SYSTEM THE CLASSIC WORKEVALTM SYSTEM

THE ULTIMATE WORKEVALTM SYSTEM

The Classic WorkEvalTM System is the same as the Basic WorkEvalTM System with the exception that the JTECH Tracker Freedom Wireless Gauges and the JTECH TrackerTM Version 5 Software replace the Commander ECHOTM Console and Wireless Gauges and the Commander ECHOTM Downloader Software. And a Job-Site Force Gauge is added to complete the Classic System.

JTECH Tracker Freedom® Wireless IsoTrack ProTM

A Second JTECH JobSimTM Basic Dynamic Lifting System

JTECH JobSimTM Comprehensive Upgrade System

A Second Bailey 5-Box Material Handling System

A Second Cardio Pulse Hand-Held Heart Rate Monitor

A 6-Step Rolling Stand-Ladder

The Blankenship Pocket WorkEvalTM and Hot Laminator

JTECH TrackerTM Hand Evaluation (CHE) Software Module

JTECH TrackerTM Manual Data Entry Software Module

The Complete JobSiteTM Analysis System


JTECH Commander ECHOTM Wireless Static Force Gauge

JTECH JobSiteTM 2 Workplace Analysis Software


The Ultimate WorkEvalTM System adds a number of items to the Classic WorkEvalTM System to make it the Most High-Tech and Capable FCE System ever assembled. It features the JTECH Tracker Freedom® Wireless IsoTrack ProTM Multidimensional Strength Assessment System, the JTECH JobSiteTM 2 Workplace Analysis Software, and additional items to provide flexibility and the greatest capability of any FCE System anywhere.

Page 1


The Basic WorkEvalTM System is designed around the phenomenal JTECH Commander ECHOTM Wireless Console and Instruments, with all of



Page 2

The JTECH Commander ECHOTM communicates with all of the JTECH ECHO Instruments wirelessly and stores the data even when the Console is turned off or powers itself off. Once the test results are transmitted from the ECHOTM Instrument to the Console from over 30 ft. away, the Console displays all of the results and calculates the Coefficient of Variation (CV) Reliability Criteria, the Right to Left Strength Deficit and Repeat Trial Consistency for Spinal Inclinometry and Calculates the Spinal Range of Motion. The JTECH Commander ECHOTM communicates with all 7 of the JTECH ECHOTM Instruments wirelessly and the ECHOTM Console and Instruments are the most portable Instruments available for Onsite FCE’s and Job Analyses.

JTECH ECHOTM Force Gauge

JTECH ECHOTM Hand Grip Gauge JTECH ECHOTM Pinch Gauge

The JTECH Commander ECHOTM Force Gauge can be used for all of the WorkEval’s One and Two Hand Lifting, Pushing and Pulling Tests, any Job Simulation Test and any Job-Site Force Measurement, with the data transmitted wirelessly to the ECHO Console for all data calculations.

The JTECH Commander ECHOTM Hand Grip Gauge allows you to perform all of the WorkEval Hand Grip tests, including the Maximum Hand Grip, the 5-Position Hand Grip, the REG Hand Grip, the Preferred Hand Grip and the Hand Grip Fatigue Test, with the data transmitted wirelessly to the ECHO Console for a calculation of the Right to Left Strength Deficit, CV Reliability Calculation and the Fatigue Index.

The JTECH Commander ECHOTM Pinch Gauge allows you to perform all of the WorkEval Hand Pinch tests, including the Maximum Lateral Pinch, the Tip Pinch, the Palmar Pinch and the Preferred Pinch Tests, with the data transmitted wirelessly to the ECHO Console for all data calculations of the Right to Left Strength Deficit and the CV Reliability Calculation.



JTECH ECHOTM Muscle Tester

Page 3

JTECH ECHOTM Inclinometer

JTECH ECHOTM Downloader Software JTECH Mobile Static Lifting Platform

The JTECH Commander ECHOTM Downloader Software enables you to quickly create color reports from the data collected on the Commander Echo Console with the click of a button. The reports allow ample space for clinicians to include information about the patient and they provide a fast and easy hard copy of the test results from any of the JTECH Commander ECHO Instruments.

The JTECH Static Mobile Lifting Platform is uniquely designed to be ideal for WorkEvals in small clinics, for On-Site FCE’s and for Pre-Placement Screening. The Sliding Handle System on the Platform easily adjusts for any Horizontal Distance so the worker does not have to move, and the rapidly adjustable Belt System adjusts for any Vertical Distance so you can test any Two Hand or One Hand Static Whole Body Lifting Test, and it weighs less then 15 lbs.

With the JTECH ECHOTM Muscle Tester, you can determine the precise amount of weakness of any Extremity and most Torso muscles due to any Orthopaedic or Neurological injury. The muscle test results are transmitted wirelessly to the ECHO Console for a calculation of the Right to Left Strength Deficit and the Coefficient of Variation (CV) Reliability Criteria. The JTECH Commander ECHO Hand-Held Manual Muscle Tester totally eliminates all of the grading-guesswork from Manual Muscle Testing.

The JTECH ECHOTM Dual Inclinometer or the Dualer IQ ProTM Digital Inclinometer provide FCE Evaluators the ability to gain an objective assessment of Spinal Range of Motion with the data transmitted wirelessly to the ECHO Console, where the results of your tests and the Reliability Criteria are stored until you decide to erase it from the Console’s solid state memory.

The JTECH JobSim Basic SystemTM Bailey Dynamic Push-Pull SLED

The JTECH JobSim Basic Lift SystemTM is a flexible Lifting System that is sturdy enough to test any worker’s Maximum RARE Material Handling ability or any Job

Specific Lifting task. It’s 30 in. x 30 in. x 7 ft. with 2-Adjustable Shelves and Barrier Plates that are easily positioned. It requires 100 lbs. of Counterbalance Weights on the Rear Weight Holders, which are purchased separately.

The Dynamic Push-Pull Sled is the ideal tool for evaluating a worker’s Dynamic Pushing and Pulling ability. The Handle adjusts for any

height worker and it holds enough weight to test any worker’s Dynamic Pushing-Pulling ability. The high-density polypropylene runners will never wear-out or mar your carpet. The Dynamic Push-Pull Sled is a must for any FCE program since it provides the only way to accurately measure a worker’s Dynamic Pushing and Pulling ability.



Bailey 5-Box Material Handling System

Page 4

Bailey High Rolling Weight Cart

Hausmann Carry-All Weight Box Bailey Low Rolling Weight Cart

The Hausmann Carry-All Weight Box makes it possible to test the worker’s One Arm Carrying ability, such as in carrying a Tool-Box. It has a Dowel Handle, 2-Cut-Out Hand Grips on each side and it holds up to 75 lbs. It’s made of ¾” Plywood covered with a high pressure Oak Laminate protective finish and it has a 1 in. Weight Rod.

Cardio Pulse Hand-Held H.R. Monitor Wrist-Type Blood Pressure Monitor

The NIOSH Lift Box 10.5 in Square, 14 in Tall and 14 lbs. with a 50 lb. Weight Capacity

The Small Lift Box 8 in Square, 12 in Tall and 9 lbs. with a 25 lb. Weight Capacity

The Medium Lift Box 13 in Square, 16 in Tall and 19 lbs. with an 80 lb. Weight Capacity

The Large Lift Box 14 in Square, 17 in Tall, 21 lbs. with a 100 lb. Weight Capacity

The Double Lift Box (Inset) 12 in x 24 in x 7 in Tall and 19 lbs. with 2 Weight Holders and an 80 lb. Weight Capacity. It can also be used for a Stair Stepping Test.

The High Rolling Weight Cart holds over 300 lbs. of Disc Weights in 2.5, 5 and 10 lb. increments, and it makes it easy to keep these weights close to your JobSim Lift System™ and Dynamic Push-Pull Sled and to access them without having to bend over to a lower weight holder. And two Weight Carts are much more efficient for larger programs where there are multiple Lift Stations or where the Push-Pull Sled may be separated from the JobSim Basic Lift System.™

The Low Rolling Weight Cart makes it easy to place weights on the Push-Pull Sled. It holds 600 lbs. of Weight in 2.5 lb., 5 lb. and 10 lb. increments, and it can make your FCE’s easier to perform when your Lifting Shelves and SLED are separated from one another.

Purdue Pegboard Fine Motor Skills Test Minnesota Manual Dexterity Test

The Purdue Pegboard is the standard test of a worker’s Fine Motor Skills ability. It’s simple, quick, standardized, it has good norms and it provides a variety of One and Two Hand tests. The Purdue Pegboard should be a staple of every FCE and WorkEval Program.

The Minnesota Manual Dexterity test has been the gold-standard for decades for testing Gross Motor Skills following any Orthopaedic or Neurological Hand Trauma injury.

Five tests are available with norms: a Placing Test, a Turning Test, a Displacing Test and One or Two-Hand Turning and Placing Tests. The 2-Board System is recommended for FCE’s because it’s easier to set up and use than the Single Board System.

The Cardio Pulse Hand- Held Heart Rate Monitor Is the easiest way to take an accurate heart rate throughout an FCE. The Sensor technology is a product of NASA’s

The Wrist-Type Blood Pressure Cuff is the most comfortable way to record Blood Pressures during an FCE, and they’ve been proven to be as accurate as an Arm Cuff. It takes only seconds to capture and display the Blood Pressure and Heart Rate on the extremely large display, and it will automatically turn itself off with disuse to preserve the two AA batteries.

Space Program and it works by the moisture in the skin. It displays an accurate Heart Rate after six beats and patients prefer this way of capturing Heart Rate over Chest Lead-Wrist Watch monitors, and a 9-Volt Battery will last for years of frequent use.



Arm BP Monitor with a Large Arm Cuff

Page 5

Disc Weights, 400 lb.

Musculoskeletal Evaluation Instruments Vertical Climbing Ladder


Flat Disc Weights work best for the Material Handling tests and the Push-Pull SLED, and you’ll want to have at least 400 lbs. in 2.5 lb. 5 lb. and 10 lb. Discs to make it easy to keep enough weights close to your JobSim Basic Lift SystemTM and your Bailey Push-Pull SLED.

Digital Camera, Camcorder and Tripod Complete Computer System

FCE programs need a good camera, preferably a Digital Single Lens Reflex (DSLR) with a powerful flash and one that can also capture video. A Tripod is also needed for your Video-FCE’s and for your Job-Site Analyses.

A quality computer system is recommended with a fast processor, a TB Hard Drive, 8 GB of Memory, 2-External Backup Hard Drives, a Wireless Mouse and for your video work, a 22 in. External Monitor.

An Arm Blood Pressure Monitor with a Large Arm Cuff is also needed for workers with large Arms. Although the Wrist-Type Blood Pressure Cuff will work with 98% of the population, you must also be prepared for those workers with very large Arms.

FCE Evaluators should have the highest expertise possible in assessing the functional status of all job-related Orthopaedic and Neurological injuries. This only requires simple evaluation instruments, including at least 4 Goniometers of different sizes, a Buck, a KaWe or a Babinski Reflex Hammer (Buck Pictured), a C-128 Tuning Fork, a Two-Point Discrimination Gauge and a Tape Measure.

The best way to determine a worker’s ability to Climb Vertical Ladders when they return to work is to have a Vertical Ladder in your clinic so you can test them. They will climb on the lower rungs only for safety, but they can climb up and down as much as needed to see if they can meet their job requirements. Ladders must be purchased separately and securely mounted.

A 355 Page Evidence-Based WorkEval Seminar Manual

The Popular Blankenship WorkEvalTM Results Form (Pictured)

WorkEval Cover Letter Templates for Four Validity Profiles

The New 8-Point Blankenship WorkEval Validity Profile

Two Laminated Pain, RPE and Heaviness Rating Scales

Hypertension/Heart Rate/Pain Recording Cards

Disability Questionnaire Packets for Each Body Part

With The Blankenship WorkEval Home Study System, you can “stay-at-home” and take the same seminar as if you were sitting in the Live Seminar, because it is Live. First, watch a Live Video Lecture by Keith Blankenship as you follow along with Keith in your copy of The Blankenship WorkEval Seminar Manual, and watch all of the Live Demonstrations. Then study the material you just covered and perform the tests on a colleague, and even contact Keith directly by e-mail for any questions you still have. Then take the Written Exam on that topic, and then move on to the next topic when you’re totally satisfied.

This is the New Continuing Education Pathway for Professionals, no time away from home, no travel, no missed work and no expensive air fares, hotels or rental cars. And the learning is actually better, because it’s self-paced, you’re at home and relaxed with less stress, and all the cost is less. And here’s the best part for employers, if you need to train another employee, and you will at some time, there’s no additional cost, the program is yours, train as many professionals as needed, and cross-train your staff to cover for illnesses and vacations.

And your staff can become Certified to help assure that they’re the best at what they do and all of your FCE’s are performed by a Blankenship Certified Functional Evaluator (CBFE).

The Blankenship WorkEval Home Study

System Includes

For Details Call:

478-475-9393

A CD with All WorkEval Forms for MS Word® & MS Publisher® with Our Permission to Use Them for Your WorkEvalsTM with No Expiration Date, And You Can Place Your Logo and Your Practice Name on Them so They are Viewed as Your Forms

The Blankenship WorkEvalTM Home Study System of High Definition Video Training Program that will Qualify for

35 Contact Hours or 3.5 CEU’s

A Pathway to Earn Your Blankenship CBFE Credentials

“Wow, It’s Just Like Being at a Live Blankenship

WorkEval Seminar”


The Classic WorkEvalTM System is the same as the Basic WorkEvalTM System with the exception that the JTECH Tracker Freedom Wireless Gauges and the JTECH TrackerTM Version 5 Software replace the Commander ECHOTM Console and Wireless Gauges and the ECHOTM Downloader Software. And a Job-Site Force Gauge is added to complete the Classic System.

THE CLASSIC WORKEVAL SYSTEM

JTECH TrackerTM Version 5 Software

Page 6

Wireless® Freedom

JTECH’s TrackerTM Version 5 Software FCE Module can help you perform better FCE’s, draw more defensible conclusions and create professional reports faster. The FCE Module is the easiest to use and the most versatile FCE software on the market today, and it seamlessly integrates all of the Wireless Freedom® Instruments and it automatically calculates all of the test results, including Right to Left strength deficits, a comparison to norms and all accepted and research-supported reliability and validity profiles, and it also automatically compiles and produces professional printed reports that are fully editable.

The JTECH Tracker Wireless Freedom® Instruments Wirelessly Communicate with the JTECH TRACKERTM Version 5 Software to Save You Time in Recording, Calculating and Printing Out Your FCE Test Results

Wireless® Freedom

Wireless® Freedom Wireless® Freedom

Wireless® Freedom JTECH Commander ECHOTM Force Gauge

Commander ECHOTM Console and Force Gauge do not require a computer to record the job site forces. So the ECHOTM Console and Force Gauge complete the Classic WorkEval System while providing the best and most portable Onsite Force Gauge available for your Job Analyses.

The JTECH Commander ECHOTM Console and Force Gauge are in The Classic WorkEval System because a Portable Force Gauge is needed to take to the Job Site to measure the forces the worker has to exert on their job, and the


The Ultimate WorkEvalTM System adds a number of items to the Classic WorkEvalTM System to make it the Most High-Tech and Capable FCE System ever assembled. It features the JTECH Tracker Freedom®

Wireless IsoTrack ProTM Multidimensional Strength Assessment System, the JTECH JobSiteTM 2 Workplace Analysis Software, and additional items to provide flexibility and the greatest capability of any FCE System anywhere.


JTECH Tracker Freedom® IsoTrack ProTM System

Page 7

The IsoTrack Pro is the Most Advanced Strength Testing System Available

In the 1970’s, University of Michigan research demonstrated that the incidence and severity of industrial Low Back injuries, and all other Musculoskeletal injuries, could be decreased substantially if an Industrial Strength Testing program was implemented. But the Americans with Disabilities Act made hiring by the risk of injury discriminatory, so professionals stopped performing these tests in the early 1990’s. This was very unfortunate because for two decades quality strength testing equipment has not been available, but strength testing is valuable for diagnosing certain diseases, assessing Orthopaedic and Neurological injuries, evaluating progress in rehab programs, assessing the strength of injured joints, and determining whether or not the injured worker can safely exert the forces they will need to exert when they return to work.

Now, after two decades, JTECH has moved the science of Strength Testing forward a quantum leap with the incredible IsoTRACK ProTM, which has exceeded all previous Static Whole Body Strength Testing machines in several critical areas. First, it allows One-Arm Testing with Right to Left Strength Comparisons calculated in addition to the traditional Two-Arm Tests. Second, it can test Pushing, Pulling and Lifting through a 180 deg. Arc. And third, any Specific Muscle Group can be tested with Make-Testing protocols. These state-of-the-art features add flexibility that no other Strength Testing Machine has ever provided, and since the IsoTRACK ProTM is a Sturdy Pole-Platform Machine with a Rigid and Comfortable Muscle Testing Stabilizing Chair with a Multi-Vector Alignment System that allows for fast, efficient and accurate alignment of the Force Cell to the patient’s body part, the patient is always in a comfortable and stable posture with no fatigue-related issues for the patient or the FCE evaluator.

A Second JTECH JobSimTM Basic Lift System & The JobSimTM Comprehensive Upgrade

A Second JobSim Basic Lift System Makes Lateral and Pivot-Lifting Possible to Test

The JobSim Basic Lift System Comprehensive Upgrade Makes it Possible to Test an Infinite Number of Upper Body Work Simulations and Constant Repetitive Tasks that are Hard to Test Otherwise



Page 8

A 2nd Bailey 5-Box Material Handling System

The NIOSH Lift Box 10.5 in Square, 14 in Tall

The Small Lift Box 8 in Square, 12 in Tall

The Medium Lift Box 13 in Square, 16 in Tall

The Large Lift Box 14 in Square, 17 in Tall

The Double Lift Box (Inset) 12 in x 24 in x 7 in Tall and 19 lbs.

A 2nd Cardio Pulse Hand-Held H.R. Monitor

The Cardio Pulse Hand-Held Heart Rate Monitor is an easy way to take an accurate heart rate, and it’s handy to have one in every location where a quick heart rate is likely to be needed.

A 6-Step Rolling Stand-Ladder

A Pocket WorkEvalTM Card & Hot Laminator

The Pocket WorkEvalTM Laminated Card is the WorkEvalTM results on a laminated credit card sized format, which allows the worker to carry their work limitations with them at all times and refer to it when necessary so they can avoid an over-stress injury. The Workers, Physicians, Case Managers and Employers all love the Pocket WorkEvalTM.

JTECH Manual Data Entry Software Module

The Complete JobSiteTM Analysis System

Expand your employer services with the JobSiteTM 2 Workplace Analysis software from JTECH. A quality Job Analysis provides vital information for preventing job injuries and making return-to-work determinations

more objective. NIOSH’s Revised Lifting Formula and

A 6-Step Rolling Stand-Ladder, or Staircase, is helpful for testing Fork Lift Operators, Truck Drivers and Heavy Equipment Operators, because it provides the ability to test whether or not they can take that first high step to get up into their equipment by having them climb up on the second step while using either one or both hand-holds to assist them. The lower two steps can also be used for a Climbing Test and for testing Patellofemoral and Knee Joint Dysfunction with the Stepping-Up and the Stepping Down Tests on varying height steps.

JTECH's Optional Manual Data Entry (MDE) Software Module lets you enter your test results collected with Non-JTECH Gauges into Tracker Version 5 or Eval Express 5 Software to obtain all of the standard calculations, to compare the results to the established norms and to create professional looking reports.

JTECH Hand Evaluation Software Module

The Comprehensive Hand Evaluation (CHE) Module was developed by Hand Specialists and provides an efficient interface that guides you through the Hand Evaluation by simply selecting the proper tests from menus and documenting your results by clicking on the proper response from lists, so documenting your results takes no longer than it takes to perform the evaluation itself. The reports can also be edited before printing and they can be uploaded to your EMR system.

the Cumulative Trauma Risk analysis help make JTECH’s JobSiteTM 2 Software a time-saving tool for collecting job-related data and collating it into a detailed and effective report that can impact an employer’s net profits. JobSiteTM 2 includes sections for the quick documentation of the job risks, such as, material handling, non-material handling, the equipment used, environmental factors and hazardous exposures.

With the JobSiteTM 2 Software, you’ll become the Ergonomic expert and a trusted consultant, which will expand your practice beyond your four walls and open new revenue streams for you for years to come.

JTECH JobSiteTM 2 Workplace Analysis Software JTECH Commander ECHO Console & Force Gauge

See Page 2 For The

Full Details

THE BLANKENSHIP WORKEVAL

EQUIPMENT SYSTEMS SUPPLIERS

JTECH Medical

Salt Lake City, Utah

Toll Free: 1-800-985-8432

Phone: 1-801-478-0680

E-Mail: [email protected]

Web: www.jtechmedical.com

WORKEVAL PRODUCTS

All JTECH Instruments,


Bailey Manufacturing

Lodi, Ohio

Toll Free: 1-800-321-8372

Phone: 1-801-478-0680


Web: www.baileymfg.com

WORKEVAL PRODUCTS

The Dynamic Push-Pull SLED

The 5-Box Material Handling Set

High Rolling Weight Cart

Hausmann Industries, Inc.

Northvale, New Jersey

Toll Free: 1-888-428-7626

Phone: 1-201-767-0255


Web: www.hausmann.com

WORKEVAL PRODUCTS

The Carry-All Weight Box

Lafayette Instrument Company

Lafayette, Indiana

Toll Free: 1-800-428-7545

Phone: 1-765-423-1505


Web: www.lafayetteinstrument.com

WORKEVAL PRODUCTS

Purdue Pegboard Test

Complete Minnesota Manual Dexterity Test

VersaClimber

Santa Ana, California

Toll Free: 1-800-237-2271

Phone: 1-714-755-5749


Web: www.versaclimber.com

WORKEVAL PRODUCTS

Hand Held Cardio Pulse Monitor

Local Stores & The Internet

WORKEVAL PRODUCTS

Wrist Blood Pressure Monitor

Large Arm Blood Pressure Monitor

Chest Lead Blood Pressure Monitor

Digital Camera, Camcorder, Tripod

Notebook Computer & External

Monitor & Wireless Mouse

External Hard Drives

Microsoft Word and Publisher

Disc Weights

Vertical Ladder

Hot Laminator

Patterson Medical

Warrenville, Illinois

Toll Free: 1-800-323-5547

Phone: 1-630-393-6000


Web: www.pattersonmedical.com

WORKEVAL PRODUCTS

Goniometers

Buck Reflex Hammer

KaWe Reflex Hammer

Babinski Reflex Hammer

Two Point Discrimination Gauge

C-128 Tuning Fork

Tape Measure

BLANKENSHIP, INC.

Macon, Georgia

Phone: 1-478-475-9393


Web: www.blankenshipworkeval.com

WORKEVAL PRODUCTS

The Blankenship WorkEval

the workeval equipment - the blankenship workevalblankenshipworkeval.com/theworkevalcatalog.pdf(cv)...

Documents