thermal heat treatmet systems
DESCRIPTION
Drying, Curing, Ovens or any thermal heat treatment process for the defence, automtovie, medical, aerospace and advanced ceramics markets.TRANSCRIPT
THERMAL HEAT TREATMENT SOLUTIONS
THERMAL HEAT TREATMENT SOLUTIONS for
Advanced Ceramics & Composite Materials
• Privately owned and formed in 1983
• Based in Stoke-on-Trent, England
• Accredited to ISO 9001/2008.
• 50 people employed throughout the company covering:-
o Design
o Engineering
o Fabrication & Installation
o Commissioning
o Sales
• Annual Group Turnover in excess of £10 million.
• Global offices in:-
o USA, Malaysia, Thailand, China & India.
COMPANY OVERVIEW
• Flexibility of contract structure,
from small scale engineering
design to full “turnkey”
packages
• Complete installation and
commissioning service.
• After sales service from the UK
CAPABILITIES
• Design, consultation and feasibility study.
• Research & Development facilities at the Head Office
• Independently validated by::-
CAPABILITIES
• Unlike conventional dryers that use heated air as the drying medium, the R-O2
drying process developed by CDS, uses dry superheated steam at
atmospheric pressure.
• The process can be adapted for all production rates, with large scale plant
capacities being possible as no maximum “scale up” barriers have been
identified.
R-02 DRYING PRINCIPLE
• Save up to 50% of drying energy cost.
• Reduced drying times in all production process.
• Higher heat carrying capacity of ‘dry’ superheated steam used to dry the product.
• Lower viscosity enables deeper and faster permeation of the heat into dense products
• Batch or continuous drying process
• Uniform & accurate temperature / humidity & airflow control on all processes.
• Sterile environments.
• Extremely efficient thermal systems.
• Incredibly low maintenance.
R-02 DRYING TECHNOLOGY
R-O2 DRYING for ADVANCED CERAMICS
Ceramic crucible
Ceramic Components A CDS R-O2 Dryer for Ceramic Crucible and Components
R-O2 DRYING for ADVANCED CERAMICS
A series of five (5) CDS R-O2 Dryers for extruded Honeycomb Ceramic catalysts
R-O2 DRYER UNDER CONSTRUCTION
R-O2 DRYING for ADVANCED CERAMICS
A CDS R-O2 Dryer for wet cast refractory blocks, shapes, bricks & monolithics
THERMAL HEAT TREATMENT UNITS
• Reduced energy cost & extremely efficient thermal systems.
• Reduced cycle times in all production process.
• Batch or continuous systems
• Uniform & accurate temperature / humidity & airflow control on all
processes, where required.
• Variety of construction materials and operating temperatures to suit
all applications.
• Industries:-
• Aerospace, Automotive, Defence, Medical, Electrical, Foundry
• Typical Applications:-
o Curing, Ovens, Baking, Paint Stoving, Drying, Drum Heating
• Typical Products:-
• Composites, Concrete, Glass fibre, Ceramics, Paints, Polymers
THERMAL HEAT TREATMENT UNITS
A CDS Thermal Heat Treatment System for Concrete/Ceramic Composites.
THERMAL HEAT TREATMENT UNITS
A CDS Thermal Heat Treatment System for Electrical cable
THERMAL HEAT TREATMENT UNITS
A series of CDS Thermal Heat Treatment Systems for Ceramic Baking
THERMAL HEAT TREATMENT UNITS
A series of CDS Thermal Heat Treatment Systems for Carbon Composites.
• Tel: +44 (0) 1782 336666
• Fax: +44 (0) 1782 599279
• Contacts: Steve Birch, Neil Harrison,
Lucas Dunne or Terry Dunne
• Email: [email protected]
• Website: www.cds-group.co.uk
• Address: CDS Group Cinderhill Trading Estate, Longton, Stoke-on-Trent, Staffordshire, United Kingdom. ST3 5JU.