THERMO TOP®Ceramic Thermal Insulating Coating

2018

REPORT NO. : DATE : 19/05/2016

WEB REQUEST NO. :REQUEST NO. : SAMPLE NO. : 2016059073PROJECT NO. : PSO16-0009PROJECT NAME : TESTING SERVICE FOR S.C.EUROPLASTIC S.R.L.CONSULTANT : NO SPECIFIC CONSULTANTCONTRACTOR : NO SPECIFIC CONTRACTORLOCATION : S.C.EUROPLASTIC S.R.L. - ROMANIASOURCE : S.C. EUROPLASTIC S.R.L - ROMANIASAMPLE DESCRIPTION : PAINTSAMPLE TYPE : THERMO TOPSURFACE TEXTURE : ROUGHDate of Sampling : 15/04/2016 Time : 10:00 Lot No. : NGDate of Receiving Sample : 11/05/2016 Time : 13:00 Lot Size : NGSize of Sample : 9 Nos. Area No. : - Sender No. : NG

23±2°C, 50±5% RHTEST CONDITIONTEST START DATE 12/05/2016

Dubai Central LaboratoryEngineering Materials Laboratory Section – Structural Unit

TEST REPORT

2016063100

DCL-11052016-0306

DETERMINATION OF SOLAR REFLECTANCE INDEX

2016042121

DATE SPECIMEN RECEIVED 11/05/2016NGSPECIMEN THICKNESS (mm)

SAMPLED BY : IONESCU MARCEL(Mfr.) TESTED BY : SANKAR RAJUSAMPLES BROUGHT IN BY : COURIERTEST METHOD : ASTM E 1980:01TEST METHOD VARIATION : NILREMARKS :

Doc Ref. : F-EM-2088-3 Rev. No. : 3

Issue Date : 31/07/2013 Page : 1 of 1

SOLAR REFLECTANCE MEASURED UNDER THE AIR MASS 1.5THIS REPORT REPRESENTS THE SUBMITTED SAMPLES ONLY.

108.89

P O BOX 67 DUBAI TEL 00971 4 3369900 FAX 00971 4 3366399

Solar Reflectance Index (SRI) for High Wind (6 to 10 m/s)

Solar Reflectance Index (SRI) for Low Wind (0 to 2 m/s)

108.73

Solar Reflectance Index (SRI) for Medium Wind (2 to 6 m/s)

AUTHORIZED BYHEAD OF UNIT

This report is computer approved, it does not require any signature

Solar Reflectance (%) as per ASTM C 1549 - 09

SPECIMEN NO.

0.0025

108.81

Standard Deviation of Reflectance

Emittance (ε) As Per ASTM C1371-04a

86.3

0.95

Standard Deviation of Emittance 0.0085

1,2,3

E-Mail : labs@dm.gov.ae - Website : http://www.dm.gov.ae/P.O.BOX 67 DUBAI, TEL : 00971-4-3369900, FAX : 00971-4-3366399

THERMO TOP® thermal insulating coating embeds the most modern insulating technology in a thermos-like ultra-thin layer. THERMO TOP® saves energy by increasing the thermal insulation level in commercial and residential

What is Thermo Top®?

buildings. Compared to the high price of classic insulation, THERMO TOP® represents a cheaper alternative, but of higher quality.

THERMO TOP® is an ecologic coating based on ceramic nanospheres exhibiting excellent thermal insulation properties.

THERMO TOP® contains a mixture of numerous silicon and ceramic spheres embedded in a latex-based acrylic liants. This combination makes this coating very light and elastic. Hence, THERMO TOP® dilates and contracts depending on the surface it is applied on.

Thermo Top® Coating Composition

The vacuum particles in its componence determine an excellent thermal insulation, at the same time reducing the heat gained during the summer through the walls, from outside to inside, and the heat loss through the walls, from inside to outside, during the winter.

THERMO TOP® coating’s functionality is based on the thermos system. Just like the latter keeps the liquid inside it at a constant temperature, in the same way does this coating conserve the temperature of the inside space it is destined for.

Reflects the heat and keeps it indoors in winter time.

Reflects the heat and

keeps the indoors cool

during the summer.

STOPS THERMAL

TRANSFER

PROTECTSAGAINSTHUMIDITY

THERMO TOP® deflects, absorbs and dissipates radiant heat. Solar heat increases the temperature built up within the building by 75% to 90%. THERMO TOP® repels up to 75% of the heat, thus reducing the temperature by up to 45%.

The Efficacy of Thermo Top® Coating

On top of this, THERMO TOP® presents over 80% solar reflectance, 96% UV resistance, and 90% emissivity.

The technology behind THERMO TOP® makes it the coating material for the future for roofs and walls, available today.

over 80%

Solar Reflectance

90%Emissivity

(ε)

96%UV Resistance

ThermalInsulation

UV Ray Resistance

Abrasion Resistance

Solar Reflectivity

1. Excellent thermal insulation.2. Anti-condensation character

by eliminating the conditions of water droplets apparition and of the causes of mold formation, thus preventing it.

3. Thermoreflectance of sun rays, implicitly of infrared radiation.

The Efficacy of Thermo Top® Coating

4. Conserves internal heat by high reduction of heat transfer and by its excellent thermal insulating character.Conserving the temperature from the inside hence leads to minimized energy costs.

The efficacy of the THERMO TOP® coating is given by its four exceptional qualities:

The special paint THERMO TOP® protects against humidity and blocks the heat transfer. Its usage redu ces the indoor space used with insulation and also reduces the weight of any structure or piece of the equipment the

Benefits of the Thermo Top® Coating

coating has been applied on.Also, it extends the life duration of the structure it is applied on. The paint’s resistance doubles its efficacy in stopping the infiltrations.

The main advantages of this paint: Ȗ Excellent thermal insulation Ȗ Energy saved Ȗ Lower costs Ȗ Very good hydroinsulation Ȗ Facile application Ȗ Fireproofing

THERMO TOP® coating can have any colour from medium to pastel. The pigment does not affect the radiant efficiency of the product.Unlike the conventional insulating methods, like mineral wool, insulating fibers, prefabricated pipes insulation, THERMO TOP® is impermeable and is not affected by salty water.

It forms a continuous, seamless layer.It also forms a layer with excellent resistance to weather-fastness, compared to other types of insulation.

THERMO TOP® is Class A fire-proofing and blocks the propagation of the flames.

Benefits of the Thermo Top® Coating

THERMO TOP® coating: ▶ is a thermal barrier (excellent

thermal insulator); ▶ reflects solar radiation (implicitly

rejects heat); ▶ fire-proof (class A); ▶ prevents corrosion under the

insulation; ▶ high water-vapour resistance; ▶ permeable to vapors (the

support it is applied on is able to “breathe”);

▶ prevents mold apparition and growth;

▶ only an ultra-thin layer necessary, of only 0,5-3 mm.

▶ quick and easy application: with the roller, trowel, brush or by gun (air-less spray gun);

▶ resistant to high impact and abbrasion;

▶ flexible (it dilates and contracts depending on the surface it is applied on);

▶ protects surfaces from salt water, rain, wind, soliciation of hot-cold weather cycles, chemical vapours, mold etc.;

▶ anticorrosive;

▶ reduces semnificatively or eliminates the formation of steam;

▶ eco-friendly; it doesn’t contain toxic or flammable substances;

▶ the composition of the paint makes it be very light and very elastic;

▶ the product’s resistance doubles its insulating efficiency;

▶ blocks vapours; ▶ waterproofs; ▶ seals off; ▶ resistant to temperatures as high

as 260°C.

Benefits of the Thermo Top® Coating

THERMO TOP® is a coating that helps you save energy and money.Because of its revolutionary properties, in winter time, this paint being an excellent thermal barrier, stops the heat loss through the walls, but also through the roof, and in the summer time, thanks to its ceramic content, it rejects the UV rays, thus protecting you from the heat.THERMO TOP® eliminates or reduces:

▶ the effect of thermal bridge – thermal transfer; ▶ conductive heat transfer; ▶ convective heat transfer; ▶ thermal radiation; ▶ condensed water.

Benefits of the Thermo Top® Coating

The THERMO TOP® coating is ideal for buildings that present a special kind of architecture, stucco, wall decorations etc. that don’t allow the usage of classic thermal insulation. The layer’s thickness of cca. 1 mm, laid by spraying, coats any geometrical form without affecting the original artistic appearance. Applications of THERMO TOP® in normal conditions:

▶ Thermal insulation of exterior walls of buildings

Areas of Use for Thermo Top®

Coating

▶ Roofs thermal insulation ▶ Thermal insulation of indoors ▶ Application in rooms with high

risk of fireApplications in very cold areas

▶ Metallic buildings in Alaska ▶ Cement mixers and reservoirs in

Alaska ▶ Pipeplines Alaska

Applications in very hot areas ▶ Pipelines in Kuwait

This coating can be easily applied on any kind of surfaces: walls, roofs, metals, brick, stone, cement, concrete, wood, metal sheets etc.

Roofs ▶ Habitats’ roofs ▶ Metallic roofs ▶ Buildings’ roofs ▶ Barracks’ roofs ▶ Poultry farms’ roofs ▶ Wavy roofs ▶ Oil tanks’ roofs ▶ Airshafts

Walls ▶ Rooms ▶ Floors ▶ Garages ▶ Indoors walls of old houses ▶ Metallic buildings’ walls ▶ Cereal bunkers ▶ Horse stables ▶ Insulating walls of steel foundries

Areas of Use for Thermo Top®

Coating

Auto ▶ Rooftops of refrigerated

autovehicles ▶ Trailers’ roofs ▶ Semitrailers’ roofs or interior

walls ▶ Racing cars - fire-proof walls,

driver’s seat, floor ▶ Inside ceiling of autotrailers ▶ Floor of autotrailers ▶ Roof of autotrailers ▶ Walls of autotrailers

Areas of Use for Thermo Top®

Coating

Air and naval ▶ Interior walls of airplanes ▶ Roofs of pilots’ cabins ▶ Ships ▶ Ship decks ▶ Pipelines in engine rooms ▶ Pipelines and reservoires in

fishing ships ▶ Shipping rooms and stowages ▶ Engine rooms

Extreme Applications ▶ HVACs ▶ Freezers, commercial

refrigerators ▶ Nitrogen reservoirs

▶ Hot water boilers ▶ Water tanks ▶ Cold water tanks ▶ Reservoirs ▶ Mixing chambers for hot

chemical substances ▶ Heat exchangers ▶ Hot oil reservoirs ▶ Military installations

Areas of Use for Thermo Top®

Coating

Pipelines ▶ Oil pipelines, under or above

ground ▶ Underwater oil pipelines ▶ Oil transferring pipes ▶ Oxygen pipelines ▶ Irrigation pipes ▶ Hot water pipes ▶ Steam pipes

Other Applications ▶ Airplanes hangar ▶ Base of bridges (reduces

freezing) ▶ Potable water reservoirs ▶ Bridges ▶ Crane beams ▶ Hydrants ▶ Exterior compartmentalisation ▶ Construction boards ▶ Buses’ roofs.

Areas of Use for Thermo Top®

Coating

Technical Data Sheet

APPLICATION TECHNOLOGY:

1. Preparing of the support surface The surfaces that THERMO TOP® will be applied on must be clean, dried, dusted and uniform.

2. Applying of the primer layer on the adequately prepared surface is carried out by paint brush, lime brush, roller or by pulverization.

Product consumption for the primer layer is of 50 g/m² - 100 g/m².

3. Applying of the THERMO TOP® thermal insulating coating is carried out after the complete drying of the primer layer. Before application, the product must be homogenized well by stirring. Applying of the product can be done by paint brush, lime brush, roller or by air-less spray gun.Minimum applying temperature: 10oC.

Product consumption for one layer of THERMO TOP® coating is of 1 L/m2 at a thickness of 1 mm.

The total thickness of the insulation must be between 0.5 ÷ 3 mm, depending on the desired level of insulation.

GUARANTEE: The product is guaranteed in its original package for 24 months.The guarantee for the applied product is of minimum 10 years.

TRANSPORTATION AND STORAGE: The product does not require special transportation and storage conditions. Keep out of direct sun during transportation and storage. Temperature range of transportation and storage: 5-40oC.

Technical Data Sheet

PACKINGPRODUCT

ASPECTCOLOUR

DENSITY (g/cm3)VISCOSITY (cP)

COATINGDRIED COATING THICKNESS

SPECIFIC CONSUMPTIONDRY SUBSTANCE CONTENT

APPLICATION TEMPERATUREREACTION TO FIRE

UV RADIATION REFLECTANCEABRASION RESISTANCE

RECOMMENDED METHOD OF APPLYING

COLOURED FINAL COATING

2,5 L, 10 L, 30 Lmonocomponenthomogeneous, pastywhite or other colours0,75 ± 0,0510 000 ± 5 000uniform, continuous, elastic0,5 - 3 mm1 L/m2

55 ± 5 %10oC - 130oCClass A (not flammable) - product is fire-proof

99%highspraying by airless spray gun

on demand

EAST CHINA COMPANY LIMITED

www.eastchinaltd.com

info@eastchinaltd.com

Telephone: (+853) 6636 1630

Avenida da Praia Grande, no 665,

Edificio Great Will, 14 andar, B,

999078 Macau