Water cooled, Diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack and cables Engine coolant heater Base frame design incorporates an integral fuel tank and anti-vibration isolators Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust silencer and steel bellows supplied separately(for open sets) Static battery charger Manual for application and installation

STANDARD SPECIFICATIONS

3 Phase Ratings, 50 Hz, PF 0,8

This generator set is manufactured in facilities certified to ISO 9001.

This generator set is available with CE certification.

This generator set has been designed to meet ISO 8528 regulation.

Enclosed product is tested according to EU noise legislation 2000/14/EC

400/230 770,00 616,00

Standby Rating (ESP) Prime Rating (PRP)

Voltage kVA kW kVA kW Amp

Standby Rating (ESP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. ESP is in accordance with ISO 8528. Overload is not allowed.

Prime Rating (PRP): Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528. 10 % overload capability is available for a period of 1 hour within 12-hour perod of operation,in accordance with ISO 3046.

OPTIONAL EQUIPMENTS

TRANSFER SWITCH

- Three or four pole motor operated circuit breaker- Four Pole Contactor- Three Pole Contactor

OTHER ACCESSORIES

- Trailer- Inlet and outlet acoustic baffles- Inlet and outlet motorised louvers

- Automatic transfer switch- Main Fuel Tank- Tool kit for maintenance

- Low and high fuel level alarm- Electrical oil drain pump- Automatic or manual fuel filling system

- Duct adapter ( on radiator)- Enclosure: weater protective or sound attenuated- Residential silencer

CONTROL SYSTEM

- Remote communication with modem- Alarm output relays

- Charge Ammeter- Earth fault, single set

- Transition synchronization with mains

- Automatic synchronising and power control system ( multi gen-set Parallel )

- Remote relay output- Remote annunciator panel

ENGINE

- Oil heater- Fuel-Water Seperator Filter

ALTERNATOR

- PMG excitation + AVR- Main line circuit breaker

- Anti-Condensation Heater- Over sized alternator

DIESEL ENGINE SPECIFICATIONS

Coolant Capacity L 110,00

Intake Air Flow m³ /min. 42,50

Governor Electronic

Oil Capacity L 40,00

Exhaust Gas Temperature ° C 635,00

Start System 24 V d.c.

Radiator Cooling Air m³ /min. 829,00

Exhaust Gas Flow m³ /min. 119,90

Fuel ConsumptionL/h

Load

162,60 119,30 79,50

%100 %75 %50

Aspiration and Cooling Turbo Charged and Change Air Cooled

No. of Cylinders and Build 12-cylinder, V - Type

Rated Speed (rpm) rpm 1500

Maximum Standby Power 652,00 kW[874,00HP]

1500 rpm

Compression Ratio 14,0:1

Bore and Stroke mm 128 x 142

Total Displacement L 21,930

Manufacturer Doosan

Model P222LE-II

ALTERNATOR SPECIFICATIONS

Design Brushless, 4 poles

Power kW 750,00

Voltage V 400/230

Current A 1084,00

Stator 2 / 3 steps

Insulation Class H

Rotor Single Bearing System, Flexible Disc

Phase 3

Cos Phi 0,80

Excitation System Electronic ( AVR )

Make Mecc Alte

Frequency Hz 50

Model ECO 40-VL/4

DIEMENSIONS AND WEIGHT

Canopykg.

Dry Weight

mm.

Lenght

mm.

Width

mm.

Height

L

Tank Capacity

MS 85 6275 5297 1606 2656 1000

AD 770 4720,00 3630,00 1550,00 2163,00 1000,00

Open Typekg.

Dry Weight

mm.

Lenght

mm.

Width

mm.

Height

L

Tank Capacity

تولید کنندهمدل

تعداد سیلندرها و نوع آرایش آنهاسیستم تنفس و خنک کارى

جابه جایى کلقطر سیلندر و کورس پیستون

سرعت مجازگاورنر

ظرفیت روغنظرفیت خنک کنندهجریان هواى مصرفى

جریان گاز خروجى از اگزوزدماى گاز خروجى از اگزوز

استارتر

مصرف سوخت

تولید کنندهمدل

فرکانستوان

طراحىکسینوس فى

فازولتاژ

جریانکلاس عایق بندى

استاتورروتور

سیستم تحریک

Standby توان

نسبت تراکم

میزان هواى خنک کننده رادیاتور

Microprocessor controlled 132 x 64 pixel LCD display makes information easy to read Front panel programming and also via PC software Soft touch membrane keypad and five key menu navigation Remote communications via RS232, RS485 and ethernet and SMS messaging Event logging (50) showing date and time Multiple date and time engine exercise mode and maintenance scheduler Engine block heater control. Controls; stop, manuel, auto, test, start, mute lamb test/transfer to generator, transfer to mains, menu navigation.

The DSE 7320 conrol module is a standard addition to our generator sets from 220 kVA upwards and it has been designed to start and stop diesel andgas generating sets that include electronic and non electronic engines. The DSE 7320 includes the additional capability of being able to monitor a mains (utility) supply and is therefore suitable for controlling a standby generating set in conjunction with an automatic transfer switch.The DSE7320 also indicates operational status and fault conditions, automatically shutting down the generating set and indicating faults by means of its LCD display on the front panel.

Standard Specifications

Generating Set Control Unit

Control panel is mounted generating set baseframe on robust steel stand or power module. Located at side of generating set with properly panel visibility.

Installation

Comonents installed in sheet steel enclosure. Phosphate chemical, pre-coating of steel provides corrosion resistant surface Polyester composite powder topcoat forms high gloss and extremely durable finish Lockable hinged panel door provides for easy component access

DSE, model 7320 Auto Mains Failure control module Static battery charger Emergency stop push button and fuses for control circuits

Construction and Finish

Devices

P 732 control system - Control SystemMenu navigation buttons

Close mains button

Main Status and instrumentation display

Alarm LED's

Close generator button

Status LED's

Operation selecting buttons

1

2

3

4

5

6

7

High oil temperature shut down Low fuel level shut down Low fuel level alarm High fuel level alarm EXPANSION MODULES Editional LED module (2548) Expension relay module (2157) Expansion input module (2130)

StandardsElecrical Safety / EMC compatibility BS EN 60950 Electrical business equipment BS EN 61000-6-2 EMC immunity standard BS EN 61000-6-4 EMC emission standard

Options

InstrumentsENGINE Engine speed Oil pressure Coolant temperature Run time Battery volts Engine maintenance due GENERATOR Voltage (L-L, L-N) Current (L1-L2-L3) Frequency Earth current kW Pf kVAr kWh, kVAh, kVArh Phase sequence MAINS Voltage (L-L, L-N) Frequency

Protection CircuitsWARNING Charge failure Battery under voltage Fail to stop Low fuel level (opt.) kW over load Negative phase sequence Loss of speed signal PRE-ALARMS Low oil pressure High engine temperature Low engine temperature Over /Under speed Under/over generator frequency Under/over generator voltage ECU warning SHUT DOWNS Fail to start Emergency stop Low oil pressure High engine temperature Low coolant level Over /Under speed Under/over generator frequency Under/over generator voltage Oil pressure sensor open Phase rotation ELECTRICAL TRIP Earth fault kW over load Generator over current Negative phase sequence

Battery charger is manufactured with switching-mode and SMD technology and ıt has high efficincy.Battery charger models' output V-I characteristic is very close to square 2405 has fully output shot circuit protection andıt can be used as a current source.2405 charger has high efficiency, long life, low failure rate, light weight and low heat radiated in accordance with linearalternatives.The charger is fitted with a protection diode across the output. Charge fail output is available. Connect charge fail relaycoil between positive output and CF output.Input: 196-264V.Output: 27,6V 5A or 13,8V 5A.

Static Battery Charger

Steel structures.

Emergency stop push button.

Control panel is mounted on the baseframe . Located at the right side of the generator set.Corrosion-resistant locks and hinges.

oil could be drained via valve and a hose

Exhaust system in the canopy.

special large access doors for easy maintanance

in front and back side special large access doors for easy maintanance

Base frame -fuel tank.

Plastic air intake pockets.

sound proofing materials

the cap on the canopy provides easy accsess to radiator cap.

Lifting points similar to ISO container , located on each top corner of the canopy.

1

2

3

4

5

6

7

8

9

13

12

11

10

MS 85 - Canopy

Introduction

and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

Standard SpecificationsCompact footprint, low profile design. Enclosure, generator set, exhaust system and fuel tank are pre-ssembled, pre-integrated and shipped as one package Body made from steel components treated with polyester powder coating Fire retardant foam insulation Easy access to all service points Exhaust system inside canopy Large doors on each side Control panel viewing window in a lockable access door Emergency stop push button mounted on enclosure exterior Cooling fan and battery charging alternator fully guarded Fuel fill and battery can only be reached via lockable access doors. Lifting points on the top of canopy and base frame

makes its generating sets' noise level tests in accordance with directive 2000/14/EC validation of the noise level test has been aproved by the notified body Szutest

Height mm. 2656

Fuel Tank Capacity L 1000

Width mm. 1606

Lenght mm. 5297

Sound-attenuated and weather protective enclosures for generating sets from abadiesel, meet event the sound requirements

Customer options available to meet your applications needs. abadiesel