this project was driven by a need to replace a wwii-vintage, tar coated, steel water line case...
TRANSCRIPT
![Page 1: This project was driven by a need to replace a WWII-vintage, tar coated, steel water line Case History: Florin County Water District, Sacramento, California](https://reader037.vdocuments.net/reader037/viewer/2022103022/56649ce65503460f949b3fea/html5/thumbnails/1.jpg)
• This project was driven by a need to replace a WWII-vintage, tar coated, steel water line
Case History: Florin County Water District, Sacramento,
California
• In total, the project will use 400 feet of 8-inch and 1200 feet of 6-inch DR18, C900 pipe.
![Page 2: This project was driven by a need to replace a WWII-vintage, tar coated, steel water line Case History: Florin County Water District, Sacramento, California](https://reader037.vdocuments.net/reader037/viewer/2022103022/56649ce65503460f949b3fea/html5/thumbnails/2.jpg)
• Assembling the Bulldog joint is the same as assembling a conventional PVC gasketed joint. In this project, a pry bar was used to lever together the joints.
Case History: Florin County Water District, Sacramento,
California
• Note, it is recommended that a wooden block be placed between the bar and the pipe’s bell.
![Page 3: This project was driven by a need to replace a WWII-vintage, tar coated, steel water line Case History: Florin County Water District, Sacramento, California](https://reader037.vdocuments.net/reader037/viewer/2022103022/56649ce65503460f949b3fea/html5/thumbnails/3.jpg)
• Florin pressure tests the pipe installed that day at the end of the day.
• Bulldog Restraint System offered a simple means of providing joint restraint to facilitate this daily pressure test.
Case History: Florin County Water District, Sacramento,
California