thrust - Tunnel Systems Yacht Thruster noted for its high quality external bow and stern thrusters, is pleased to announce the availability of its new line of tradional in-the-hull thrusters branded thrust and manufactured by Sleipner, the world’s number one thruster manufacturing company. These thrusters have been in use by Volvo as OEM equipment and other companies and have a proven record of reliability and service. thrust have been based on research and development test results, extensive laboratory findings and sea trials. both mechanically and electronically. thrust propellers represent a new generation propelling power. A high level of output combined with reduced tunnel diameter allows for the positioning of the thrust, deeper and farther to the bow of a given vessel, providing for increased performance due to the leverage gained through an improved turning moment in relation to the hull.

Yacht Thruster with the launch of its thrust acheives four primary goals:l A thruster system where the various models are based on the very same technology.l A system which ensures easy and time efficient installation.l Low maintenance.l Extraordinary thrust effect from a compact unit using less battery consumption.

A Revolutionary, New Mechanical ConstructionThe thrust system has direct running through a solid transmission belt between the motor and the propeller shaft. There is no oil in the gear housing. The engine is placed in parallel with the tunnel. This design reduces noise, is compact and provides excellent conditions for installation. thrust are highly desirable in vessels where space is an issue. The gear housing and the pipe bracket is one unit and made from stainless steel AISI 316 for the larger models. The thrust on smaller thruster’s bracket is made from glass fiber armored composites. This way, there are no future expenses for galvanic anodes. The thrust is delivered installed onto the pipe bracket; as one unit. The installation is therefore easy and research has indicated savings of up to 50 per cent in time compared to the installation of conventional thrusters.

Yacht Thruster Control Elements

thrust - Tunnels Manufactured in GRP, protected by a fiberglass mat providing a smooth, installation friendly outer surface.Delivered with an inner diameter of 4 5/16’’ - 6 5/6’’ - 7 1/4’’ or 9 13/16’’.

No Notable Speed ReductionA tunnel installation, which has been carried out properly, will not produce any notable reduction in speed. It maintains a low noise level and provides optimal effect. It will also serve a function to reinforce the bow and hull. The very best performance is achieved when the passage between hull and tunnel is rounded off with a radius corresponding to 10 percent of the tunnel diameter.

Tool Set – the Safe & Easy Way to InstallThis tool kit makes the installation safer and easier both for the professional and for the do-it-yourself enthusiast. The kit consists of a rod fitter and an electric cutter with a special cage. Spacers have been made for each tunnel diameter. Contact us for more information.

ⓘThrustⓔThrust

Single Joystick OR touchpad Control + Control box is standard with all installation kits.

Control Box Single Joystick Control Touchpad Control Dual Joystick Control Boat Shaped Dual Control Dual Remote Control

www.YachtThruster.com1.888.898.8608

© 2013 Yacht Controller LLC, All Rights Reserved.

YACHT.com.CO

‘‘ Innovative Technology for the Marine Industry ‘‘

MODEL TYPE Technical Data

Note: The information is given with reservations as specifications may change without further notice.

thrust - Tunnel Thruster Systems