ths 21e series nest - heat and control · non-magnetic and stainless steel metal ... contaminating...
TRANSCRIPT
800 227 5980 ¬ 510 259 0500 ¬ [email protected] and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
w w w . h e a t a n d c o n t r o l . c o m
THS 21E SERIES
Quality Control at its fi nest MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS Fully HACCP
and GMP compliant
FEATURES
Superior detection capability of magnetic, non-magnetic and stainless steel metal contaminants
Very eff ective compensationof product eff ect
FDA Title 21CFR Part 11 compliant:
Data Security Data Integrity
Data Traceability
Rugged AISI 316L stainless steel construction and food-compatible plastic parts (EU, FDA compliant)
Superior washdown construction
THS/21E Multi-frequency Technology for maximum sensitivity on multiple product lines.
w w w.heat andcontr ol .com2Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
MULTI-FREQUENCY TECHNOLOGY
The Multi-Frequency Technology allows maximum sensitivity for detection of contaminating metals, both magnetic and non-magnetic and including high-resistivity stainless steels, to be maintained.
An automatic selection function allows the Metal Detector to choose the optimum frequency for the product in transit during the autolearn phase.
The automatic tracking function eliminates any further variations due to the “Product Eff ect”. The wide pass band of the Metal Detector allows operation at maximum sensitivity at both slow and fast speeds. The digital analysis of the signal provided by the antenna allows the user to achieve extremely high sensitivity, immunity to interference and operational stability.
FEATURES
High sensitivity to all magnetic and non-magnetic metals, including stainless steel
Multi-frequency Technology for maximum sensitivity on multiple product lines
High immunity to environmental interference
AISI 316L stainless steel construction to IP65 protection level
Control Panels listed according to UL 508A and CSA-C22.2 No. 14-05
Automatic learning & tracking of product eff ect
250 product data memories, selectable by local programming or network software
1.000 storable events
4 X 20 character alphanumeric display
Local programming: 4 keys, 3 with double function
∂ THS 21E Metal Detectors Series with MULTI-FREQUENCY TECHNOLOGY
THS/SL21ESlim Line Metal Detector for applications in limited space.
w w w.heat andcontr ol .com 3Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS/21E and THS/21E-3F d models
THS/SL21E model - Slim Line Metal Detector for applications in limited space
M8
FIXING HOLES
1.6” 1.6”
FAMILY DW
Detection
Width
DH
Detection
Height
TH
Total
Height
DL
Detection
Length
FHL
Fixing Holes
Length
TP
Tunnel
Position
FHP
Fixing Holes
Position
FHD
Fixing Holes
Distance
DC
Detection
Center
TW
Total
Width
A 8”- 9.9”-...- 39.4” 4”- 4.9”- 6”- 6.9” 15.5” 11.4” 7.5” 4.1”
TP -1.2” DW +2.4”
8.1” DW +15.8”
B 13.8”- 15.8”-...- 31.5” 8”- 8.9”- 9.9”- 10.8” 21.7” 15.3” 11.4” 6.3” 11” DW +19.7”
C 17.8” - 19.7”-...- 39.4” 11.8”- 12.8”- 13.8” 25” 19.3” 15.3” 8.3” 12.6” DW +23.6”
D 19.7”-21.7”-23.6”- 27.6”...- 51.2” 15.8”- 17.8” - 19.7” 35.6” 19.3” 15.3” 10.2” 17.9” DW +27.6”
0.9”
6.7”
4”0.
2”
3.7”
1” 1”
+ 15”
4-M8 SCREWS
FIXING HOLES
FAMILY DW DH TH
A
6”- 6.9”-8”-...17.8”
4” 12.2”
B 4.9”- 6” 14.2”
C 6.9”- 8” 16.2”
D 8.9”- 9.9” 18.1”
E 10.8”- 11.8” 20.1”
+ 2”
w w w.heat andcontr ol .com4Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
The THS/G21E series is designed to inspect powders, granules and other loose materials transported in free-fall through tubes and pipelines.
When fitted with a deflector, the THS/G21E becomes a system that detects and removes any contaminating metals, both magnetic and non-magnetic.
Digital analysis of the signal provided by the antenna allows extremely high levels of sensitivity, immunity to interference and operational stability to be achieved.
The very high detection speed of the THS/G21E allows the contaminated portion of product to be removed without slow-ing down the production fl ow.
Alternatively, when mounted on a packaging machine, the THS/G21E system is able to send a command to produce a double layer of packaging around the contaminated product. This can later be identifi ed and removed from the production cycle manually.
The system is designed to communicate with external con-trol systems, either connected directly or via a communica-tions network.
∂ THS G21E Metal Detectors Series for FREE-FALLING PRODUCT APPLICATIONS
THS/G21E-F series with Reduced Metal Free Zone for limited space installations, while maintaining optimal detection of all metals.
THS/G21E series: Standard pipe sizes available to suit all applications (ATEX version available ).
THS/G21E Control Power Box
w w w.heat andcontr ol .com
DH VL
øT
VLTW
HL
7.1”
7.1”
11.4”
0.5”
0.5”
11
5.5”
5.5”
1”
0.8”
0.8”
0.9”
0.9”
0.9” 1.2”
4-M8 x 0.6”Fixing holes
4-M8 x 0.6”Fixing holes
4-M8 x 0.6”Fixing holes
DH/2 1.2”
1”
5Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS/G21E model
THS/G21E-F model
MODEL T TW DH VL HL
THS/G21x-50 2”14.2” 9.9” 8.1” 8.9”
THS/G21x-100 4”
THS/G21x-150 6” 16.2” 11.8” 10” 10.9”
THS/G21x-175 6.9” 17.2” 12.8” 11” 11.9”
THS/G21x-200 8” 18.1” 13.8” 12” 12.8”
THS/G21x-250 9.9” 20.1” 15.8” 14” 14.8”
MODEL T Te TW DH VL HL VD
THS/G21x-100F 4” 4.7” 15.2” 9.9” 8.1” 8.9” 4.9”
THS/G21x-150F 6” 6.6” 17.1” 11.8” 10” 10.9” 6”
THS/G21x-175F 6.9” 7.6” 18.1” 12.8” 11” 11.9” 6.4”
THS/G21x-200F 8” 8.6” 19.1” 13.8” 12” 12.8” 6.9”
w w w.heat andcontr ol .com6Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
FDA 21 PART 11 COMPLIANT
The THS 21E Metal Detector Series is a high-sensitivity, high-precision measuring instrument. The data relating to each detection and ejection are stored in an events memory and cer-tify production quality, the inspection itself and programming operations, as well as the periodic functional test phases using standard test samples.
FDA Code Title 21 Part 11 prescribes rigorous criteria for access to programming and computer data protection which have been fully adopted in the CEIA THS 21E Series fi rmware.
The requirements regarding Security, Integrity and Traceabil-ity are therefore satisfi ed.
FDA 21 CFR Part 11 Compliant
for data security, integrity, and traceability
Automatic verifi cation of the installation
Quality and Environmental Compatibility
IXC and Web-Server functions
Modern, rugged and
user friendly interface
Increase in Sensitivity
performance
Real-time embedded
Self-Calibration Control
Exclusive Global Auto-Learn
System
CEIA THS 21E Metal Detection Systems off er detection, construction quality and reliability characteristics that make them the most suitable and eff ective solution to automatic elimination of metal contaminants.
Fully HACCP and GMP compliant, CEIA Metal Detectors are manufactured according to ISO 9001 certifi ed Quality System using EC and FDA approved materials.
w w w.heat andcontr ol .com 7Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
REAL-TIME EMBEDDED SELF-CALIBRATION CONTROL
The Self-Calibration control allows maximum repeatability and performance consistency over time and with environmen-tal changes. By means of specifi c signals sent to the trans-mission and reception chain of the Metal Detector, constant monitoring of the detection characteristics is carried out, with consequent constant compensation for any variations caused by environmental factors.
AUTOMATIC VERIFICATION OF THE INSTALLATION QUALITY AND ENVIRONMENTAL COMPATIBILITY
THS 21E Series introduces new tools for the installation and maintenance technicians which allow them to measure the environmental compatibility of the Metal Detector.
The measurements include general mechanical and elec-tromagnetic environmental compatibility, specifi c electro-magnetic compatibility and the automatic examination of the degree of metal interference from the conveyor belt.
This latter function becomes even more important when the high level of sensitivity of the THS 21E Metal Detector Series is taken into consideration.
EXCLUSIVE GLOBAL AUTO-LEARN SYSTEM
The THS 21E Series employs an exclusive Auto-Learn system for food products which provides simultaneous maximum sensitivity to all metals starting from a single learning tran-sit. The system allows optimization of the detection sensi-tivity to all metals with the maximum speed and precision, equivalent to hundreds of conventional learning transits: these results in levels of precision and effi ciency have never been obtained before.
For products with changing or varying product signal after autolearn, the THS 21E Series includes an advanced autole-arn function that runs in the background, to capture this product signal during normal production while still detect-ing metal. When the recording is ended, the operator has the option to analyze the data immediately, or wait until a later time when the line is stopped so as not to interrupt produc-tion. The data that was added during the background autole-arn is analyzed, along with the original autolearn data, and the detection parameters are modifi ed in order to also cancel the varying product signal.
INCREASED DETECTION
SENSITIVITY
REDUCED PRODUCT
WASTE
FEWER OPERATOR
INTERVENTIONS
FEWER PRODUCT
ACQUISITION PROCEDURES
REDUCTION IN LINE
STOPPAGES
NO PERIODIC CALIBRATION
INCREASES IN PRODUCTIVITY AND COST SAVINGS
w w w.heat andcontr ol .com8Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
MODERN, RUGGED AND USER FRIENDLY INTERFACE
¬ Industrial rate design
¬ Easy to read, high-contrast graphic display
¬ Large Product Memory: 250 entries with easy alphabetical sorting and pattern matching
LARGE PRODUCT MEMORYLARGE PRODUCT MEMORY
EASY TO READ, EASY TO READ,
HIGH-CONTRAST DISPLAYHIGH-CONTRAST DISPLAY
RUGGED, ANTIVANDALIC RUGGED, ANTIVANDALIC
STAINLESS STEEL KEYBOARDSTAINLESS STEEL KEYBOARD
w w w.heat andcontr ol .com 9Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
SOPHISTICATED INTERFACE CAPABILITIES
THS PRODUCTION PLUS
E T H E R N E T
» BLUETOOTH® CONNECTIVITY
In the THS/21 Series, local connection to the maintenance technician’s computer no longer requires physical access to the interior of the detector or the use of unwieldy connection cables. The Bluetooth connection can be used for program-ming, monitoring of the signals via the CEIA MD-Scope program and the transfer of the data contained in the Metal Detector’s events memory.
» NETWORK COMMUNICATION CAPABILITIES
The Metal Detector can be linked to an Ethernet network (optional IXC module required). In association with the THS Production Plus Software it enables remote management of production, collection of all technical and operational events, generation of statistical and traceability reports in compliance with FDA 21 CFR part 11 requirements.
» MD-SCOPE
Software Diagnostic Package complete with connector cable and hardware key:
¬ Remote programming
¬ Signal input/output
¬ Alarm threshold and amplitude of the signal
¬ Oscilloscope functionalities
» THS PRODUCTION PLUS
¬ Connects and Acquires Data from Multiple THS Detectors via Ethernet LAN
¬ Provides Connection to an External Database and Defi nition of a Programmable Block of SQL Instructions for each Metal Detector Event
¬ Enables Data Base Management and Back-Up of Metal Detector events
¬ Report Data Exportable in HTML and CSV format
¬ Provides User Authentication and Manages Electronic Signatures and Records
¬ Allows Data Integrity and Operator Auditing
¬ FDA Requirements Compliant, Title 21 of the Code of Federal Regulations (CFR)
¬ Email senderPRODUCTION
LINE #1
PRODUCTION
LINE #2
PRODUCTION
LINE #N
w w w.heat andcontr ol .com10Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
» IXC MODULE
¬ Gateway to THS Production Net Management System
¬ Integrated Web-server
¬ Dual 100base-T Ethernet
¬ Dual Full Speed USB interface
¬ Wi-Fi 802.11b/g
¬ 100.000 events internal data logger
¬ Additional web-server functionality
» WEB-SERVER INTERFACE
¬ Built-In MD SCOPE
The MD Scope functions (including oscilloscopes) are available to every user connected to the Metal Detector via Ethernet or WiFi.
¬ StatusReplicates every message displayed by the THS (updated each 5 s).
¬ ProductsDisplays the list of products stored into the THS memory, the selected product is shown in green. This page allows the product to be changed.
¬ Products ExportAllows selection of all or part of the products stored in the THS memory in order to export them.
¬ Products ImportAllows importation of all or part of the products exported.
¬ Buff er ExportAllows exportation of events occurred in a selected time frame.
¬ Confi guration Backup/RestoreAllows backup or restoring of the connected system confi guration.
¬ Confi guration Export/ImportAllows the confi guration to be exported or imported from other Metal Detectors of the same model, installed on the same system.
IXC AND WEB-SERVER FUNCTIONS
LOCAL CONNECTIVITY ADVANCED CONNECTIVITY
WIRED NETWORK CLIENTS
WIR
ELES
S N
ETW
ORK
CLIE
NTS
NETWORK
WINDOWS BASED SERVER WITH NETWORK SEARCH ENGINE
hp ProLiant ML330g3
IXC module
w w w.heat andcontr ol .com 11Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
SPECIFICATIONS
SPECIAL FEATURES THS/21E
Detection sensitivity High
Immunity to environmental interference High
Data display type Alphanumeric OLED - 4x20 characters
Local programming 4 keys, 3 with double function
Control Power Box or Conveyor Control System according
to Standards UL 508A and CSA-C22.2 No. 14-05
on request
Audio and visual detection indicators
Display of the signal level by means of bar graph
Inspected/contaminated product counter
ISO 9001 certifi ed manufacturer
Extremely compact probe on SL (Slim Line) version
Detector for magnetic and non-magnetic metals, for use with different types of product thanks to selection of the operating frequency
Autolearn and automatic tracking of the product effect
Probe with circular opening for checking material transported in tubing, on THS/G21 series
Up to 250 product data memories, selectable by local programming or network software
Up to 40 defi nable users with username and password
DATA MANAGEMENT Management of electronic production data and electronic
signatures as per CFR 21, Part 11
Data security
Data integrity
Data traceability
EVENTS STORAGE Complete monitoring of occurred events Ejections
Test results
Programming accesses
Programming operations
Faults
I/O INTERFACES RS232, Auxiliary RS232, Bluetooth, Ethernet/WiFi/USB (optional)
SIGNALLING Acoustic Via internal buzzer
Optical Alphanumeric display with bar-graph indication
Light indicators on control unit: RED: Alarm or Fault / GREEN: Power on
PROGRAMMING Local: built-in keyboard and high-contrast display
Remote: through computer connected via Bluetooth, RS232, Ethernet or WiFi and managed with CEIA MD Scope software, THS Production Plus
software or any other terminal emulation program or through Web Server (with optional IXC card)
w w w.heat andcontr ol .comDP002K0020V1000US-78056
THS 21E SERIES MULTI-FREQUENCY INDUSTRIAL METAL DETECTORS
SPECIFICATIONS
Heat and Control reserves the right to make changes, at any moment and without notice, to the models, their accessories and options, to the prices and conditions of sale.
21121 Cabot Blvd. Hayward, CA 94545 USAPhone 1 800 227 5980 / 1 510 259 0500 ¬ Fax 1 510 259 0600 ¬ [email protected]
SAFETY AND SECURITY
Protection degree THS/21E IP65
On UL versions, the Control Power Box and Conveyor Control System have a
4X-12 certifi ed degree of protection
Electrical insulation Galvanic isolation of the mains voltage
Compliant with international standards for safety and radio interference
SUPPLY Control Power Box Main voltage 100-240 VAC
Frequency and phase 50/60 Hz - single phase
Full load current (FLA) 2.2 A
Conveyor Control System Main voltage 115 V: 100-120 VAC
230 V: 200-240 VAC
Frequency and phase 50/60 Hz - single phase
Full load current (FLA) 115 V version: 11.2 A
230 V version: 11.4 A
Connected motor
nominal voltage
200÷240 V triphase
Connected motor
maximum power
115 V version: 0.37 kW (0.5 hp)
230 V version: 0.75 kW (1 hp)
Small-size power supply card00211AL_ Power supply voltage 20÷30 Vdc o Vac; 2A max.
ENVIRONMENTAL CONDITIONS
Temperature Operating 14°F to 131°F (-10 to +55 °C)
Storage -40°F to 158°F (-40 to +70 °C)
Relative humidity Operating / Storage 5 – 90 %, non-condensing
MANAGEMENT SOFTWARE THS Production software for statistical and operational management of networked THS systems
MD-SCOPE for maintenance and programming operations