tibcoactivematrix adapterfor database installation · 2013-07-30 · installed into an installation...

TIBCO ActiveMatrix® Adapter forDatabase

InstallationSoftware Release 7.0July 2013

Two-Second Advantage®

Important Information

SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDEDOR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITEDADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLEDSOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FORANY OTHER PURPOSE.USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF ALICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSEAGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USERLICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THESOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARELICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATEDIN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMSAND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND ANAGREEMENT TO BE BOUND BY THE SAME.This document contains confidential information that is subject to U.S. and international copyright laws andtreaties. No part of this document may be reproduced in any form without the written authorization of TIBCOSoftware Inc.TIBCO, Two-Second Advantage, TIBCO ActiveMatrix Adapter for Database, TIBCO ActiveMatrix Binding Typefor Adapter, TIBCO ActiveMatrix BusinessWorks, TIBCO ActiveMatrix Implementation Type for TIBCOAdapters, TIBCO ActiveMatrix Service Bus, TIBCO ActiveMatrix Service Grid, TIBCO Adapter SDK, TIBCOAdministrator, TIBCO Business Studio, TIBCO Database Drivers Supplement, TIBCO Designer, TIBCOEnterprise Message Service, TIBCO Hawk, TIBCO Rendezvous, and TIBCO Runtime Agent are either registeredtrademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries.Enterprise Java Beans (EJB), Java Platform Enterprise Edition (Java EE), Java 2 Platform Enterprise Edition(J2EE), and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle Corporationin the U.S. and other countries.All other product and company names and marks mentioned in this document are the property of theirrespective owners and are mentioned for identification purposes only.THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALLOPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAMETIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFICOPERATING SYSTEM PLATFORM.THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BEINCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKEIMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED INTHIS DOCUMENT AT ANY TIME.THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY ORINDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDINGBUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.Copyright © 1999-2013 TIBCO Software Inc. ALL RIGHTS RESERVED.TIBCO Software Inc. Confidential Information

TIBCO ActiveMatrix Adapter for Database Installation

| iii

Contents

Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viiiTIBCO ActiveMatrix Adapter for Database Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viiiOther TIBCO Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Connecting with TIBCO Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiiiHow to Join TIBCOmmunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiiiHow to Access TIBCO Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiiiHow to Contact TIBCO Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii

Chapter 1 Installation Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

TIBCO ActiveMatrix Adapter for Database Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 2 Pre-installation Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Overview of Pre-installation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Installer Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10System Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Supported Platforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Required Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 3 Installation and Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16GUI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Silent Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21GUI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21


iv | Contents

Console Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 4 Post-installation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Post-installation Tasks on Microsoft Windows Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Configuring the Database Account Used by the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Configuring the Adapter in TIBCO Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Installing Additional TIBCO Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Post-installation Tasks on UNIX Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Setting Directory Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Configuring the Adapter in TIBCO Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Installing Additional TIBCO Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Appendix A Installed Files Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Installed Directories and Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33


Tables | v

Tables

Table 1 TIBCO Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Table 2 General Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Table 3 Syntax Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Table 4 TIBCO ActiveMatrix Adapter for Database Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table 5 Required Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Table 6 Installed Directories and Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32


vi | Tables


| vii

Preface

TIBCO ActiveMatrix Adapter for Database software is a bidirectional gateway between databases and applications configured for the TIBCO environment. The adapter supports publication, subscription, and request-response interactions.

This document describes how to install the TIBCO ActiveMatrix Adapter for Database software.

Topics

• Related Documentation, page viii

• Typographical Conventions, page x

• Connecting with TIBCO Resources, page xiii

This software may be available on multiple operating systems. However, not all operating system platforms for a specific software version are released at the same time. See the readme file for the availability of this software version on a specific operating system platform.


viii | Related Documentation

Related Documentation

This section lists documentation resources you may find useful.

TIBCO ActiveMatrix Adapter for Database DocumentationThe following documents form the TIBCO ActiveMatrix Adapter for Database documentation set:

• TIBCO ActiveMatrix Adapter for Database Concepts Read this manual for terminology and concepts of the product. The other manuals in the documentation set assume you are familiar with the information in this manual.

• TIBCO ActiveMatrix Adapter for Database Installation Read this manual for instructions on site preparation and installation.

• TIBCO ActiveMatrix Adapter for Database Configuration and Deployment Read this manual for instructions on how to create, configure, and deploy adapter projects.

• TIBCO ActiveMatrix Adapter for Database Examples Read this manual to work through the examples provided with the adapter.

• TIBCO ActiveMatrix Adapter for Database Release Notes Read the release notes for a list of new and changed features. This document also contains lists of known issues and closed issues for this release.

Other TIBCO Product DocumentationYou may find it useful to read the documentation for the following TIBCO products:

Table 1 TIBCO Products

TIBCO Product Description

TIBCO ActiveMatrix® Binding Typefor Adapters

This product is an ActiveMatrix binding that integrates the TIBCO Adapters with the ActiveMatrix environment.

TIBCO ActiveMatrix BusinessWorks™ This product provides an integration platform that enables companies to rapidly integrate systems and automate business processes.


Preface | ix

TIBCO ActiveMatrix® Implementation Typefor TIBCO Adapters

This product provides you capabilities to upload and deploy TIBCO Adapter configurations (packaged as EAR files) using the TIBCO ActiveMatrix Administrator GUI.

TIBCO ActiveMatrix® Service Bus This product is a lightweight enterprise service bus (ESB) that mediates the communication between applications and services by routing and transforming disparate data formats and transport protocols.

TIBCO ActiveMatrix® Service Grid This product is a scalable and extensible platform for developing, deploying, and managing applications that conform to a service-oriented architecture.

TIBCO® Adapter SDK This product provides a class library that allows developers to implement an adapter with minimal effort.

TIBCO Administrator™ This product is designed to manage users, monitor machines and deploy applications that use TIBCO products.

TIBCO Business Studio™ This product is designed for business analysts who need to document business processes, solution engineers who implement business processes, and SOA developers who can create composite applications.

TIBCO® Database Drivers Supplement This product provides the licensed DataDirect database JDBC drivers that can be used with TIBCO ActiveMatrix Adapter for Database.

TIBCO Designer™ This product provides a graphical user interface to create TIBCO ActiveMatrix BusinessWorks process definitions or create or modify TIBCO Adapter configurations.

TIBCO Enterprise Message Service™ This product sends messages from your applications in a format that conforms to the Java Messaging Service (JMS) specification.

TIBCO Hawk® This product is designed to monitor and manage distributed applications and systems throughout the enterprise.

TIBCO Rendezvous® This product uses messages to enable distributed application programs to communicate across a wide variety of hardware platforms and programming languages.

TIBCO Runtime Agent™ This product is a bundle of TIBCO software and third-party software that is needed to run many TIBCO applications such as TIBCO ActiveMatrix BusinessWorks and TIBCO Adapters.

Table 1 TIBCO Products (Cont’d)

TIBCO Product Description


x | Typographical Conventions

Typographical Conventions

The following typographical conventions are used in this manual.

Table 2 General Typographical Conventions

Convention Use

ENV_NAME

TIBCO_HOME

TIBCO products are installed into an installation environment. A product installed into an installation environment does not access components in other installation environments. Incompatible products and multiple instances of the same product must be installed into different installation environments.

An installation environment consists of the following properties:

• Name Identifies the installation environment. This name is referenced in documentation as ENV_NAME. The default value is TIBCO_HOME.

• Directory The folder into which the product is installed. This folder is referenced in documentation as TIBCO_HOME.

TIB_ADADB_HOME TIBCO ActiveMatrix Adapter for Database is installed into a directory within a TIBCO_HOME directory. This directory is referenced in documentation as TIB_ADADB_HOME. The default value of TIB_ADADB_HOME depends on the operating system. For example on Windows systems, the default value is C:\tibco\adapter\adadb\ReleaseNumber.

code font Code font identifies commands, code examples, filenames, pathnames, and output displayed in a command window. For example:

Use MyCommand to start the foo process.

bold code font Bold code font is used in the following ways:

• In procedures, to indicate what a user types. For example: Type admin.

• In large code samples, to indicate the parts of the sample that are of particular interest.

• In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [enable | disable]


Preface | xi

italic font Italic font is used in the following ways:

• To indicate a document title. For example: See TIBCO ActiveMatrix Adapter for Database Concepts.

• To introduce new terms. For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal.

• To indicate a variable in a command or code syntax that you must replace. For example: MyCommand PathName

Key combinations Key name separated by a plus sign indicate keys pressed simultaneously. For example: Ctrl+C.

Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q.

The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances.

The tip icon indicates an idea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result.

The warning icon indicates the potential for a damaging situation, for example, data loss or corruption if certain steps are taken or not taken.

Table 3 Syntax Typographical Conventions

Convention Use

[ ] An optional item in a command or code syntax.

For example:

MyCommand [optional_parameter] required_parameter

| A logical OR that separates multiple items of which only one may be chosen.

For example, you can select only one of the following parameters:

MyCommand param1 | param2 | param3

Table 2 General Typographical Conventions (Cont’d)

Convention Use


xii | Typographical Conventions

{ } A logical group of items in a command. Other syntax notations may appear within each logical group.

For example, the following command requires two parameters, which can be either the pair param1 and param2, or the pair param3 and param4.

MyCommand {param1 param2} | {param3 param4}

In the next example, the command requires two parameters. The first parameter can be either param1 or param2 and the second can be either param3 or param4:

MyCommand {param1 | param2} {param3 | param4}

In the next example, the command can accept either two or three parameters. The first parameter must be param1. You can optionally include param2 as the second parameter. And the last parameter is either param3 or param4.

MyCommand param1 [param2] {param3 | param4}

Table 3 Syntax Typographical Conventions (Cont’d)

Convention Use


Preface | xiii

Connecting with TIBCO Resources

How to Join TIBCOmmunityTIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts. It is a place to share and access the collective experience of the TIBCO community. TIBCOmmunity offers forums, blogs, and access to a variety of resources. To register, go to http://www.tibcommunity.com.

How to Access TIBCO DocumentationYou can access TIBCO documentation here:

http://docs.tibco.com

How to Contact TIBCO SupportFor comments or problems with this manual or the software it addresses, contact TIBCO Support as follows:

• For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site:

http://www.tibco.com/services/support

• If you already have a valid maintenance or support contract, visit this site:

https://support.tibco.com

Entry to this site requires a user name and password. If you do not have a user name, you can request one.

http://www.tibco.com/services/support

https://support.tibco.com

http://docs.tibco.com

http://www.tibcommunity.com


xiv | Connecting with TIBCO Resources


| 1

Chapter 1 Installation Introduction

This chapter explains software components of the product, installation modes, installation environment, and installation logging.

Topics

• TIBCO ActiveMatrix Adapter for Database Components, page 2

• Installation Modes, page 3

• Installation Environment, page 4

• Installation Logging, page 5


2 | Chapter 1 Installation Introduction

TIBCO ActiveMatrix Adapter for Database Components

TIBCO ActiveMatrix Adapter for Database consists of the software components listed in Table 4.

You can select the components to install by either using the profiles predefined in TIBCO Universal Installer or explicitly selecting the components you want to install.

By default, TIBCO Universal Installer installs all the components with the Typical profile. Meanwhile, the installer enables you to customize the installation by explicitly selecting the components to install.

Table 4 TIBCO ActiveMatrix Adapter for Database Components

Component Description

Runtime This process does the actual work of passing and converting data to and from the vendor application.

Design time Adapter-specific GUI that is loaded in TIBCO Designer at configuration time. This component includes the palettes and samples that demonstrate how TIBCO ActiveMatrix Adapter for Database interacts with TIBCO ActiveMatrix BusinessWorks.

Documentation This component is required for context sensitive help.

The adapter installation package does not include JDBC drivers.


Installation Modes | 3

Installation Modes

Three installation modes are available: GUI, console, and silent.

GUI Mode

In GUI mode, the installer presents panels for you to make choices about product selection, product location, and so on. To invoke the installer in GUI mode, double-click the executable.

Console Mode

In console mode, you run the installer from the command prompt or terminal window. This is useful if your machine does not have a GUI environment.

Silent Mode

Silent mode installs the product using either default or custom settings that are saved in a response file. Silent mode installs the product without prompting you for information.



Installation Environment

TIBCO products are installed into an installation environment. A product installed into an installation environment does not access products in other installation environments. Incompatible products and multiple instances of the same product must be installed into different installation environments.

An installation environment consists of the following properties:

• Name (ENV_NAME) Identifies the installation environment.

On Microsoft Windows, the name is appended to the name of Windows services created by the installer and is a component of the path to the product shortcut in the Windows Start > All Programs menu. The default value is TIBCO_HOME.

• Directory (TIBCO_HOME) Identifies the folder into which the product is installed.

The installer installs any products installed to the default installation environment directly under the Windows Start > All Programs > TIBCO menu. For all other environment, the installer creates a shortcut under the Windows Start > All Programs > TIBCO > ENV_NAME menu.


Installation Logging | 5

Installation Logging

TIBCO Universal Installer writes logging information to the tibco_universal_installer.username_install.log file in the .TIBCO/install_timestamp folder of the user’s home directory. To change the location of the installer log file, specify the option -V logFile="myLogFile" when you run the installer.

The installer log file captures the following information:

• Installation environment details such as user that invoked the installer, host name, Java home in the environment, operating system details, and so on.

• List of assemblies installed.

• Information related to the Ant scripts that are executed by the installer.


| 7

Chapter 2 Pre-installation Tasks

This section explains the tasks that you need to complete before the TIBCO ActiveMatrix Adapter for Database installation.

Topics

• Overview of Pre-installation Tasks, page 8

• Installation Requirements, page 9


8 | Chapter 2 Pre-installation Tasks

Overview of Pre-installation Tasks

Before you start with installation, make sure your system meets all prerequisites, decide on the installation environment, and download and extract the installation package:

1. Make sure your environment meets all requirements.

See Installation Requirements on page 9 for details.

2. Decide on whether to install the product in an existing installation environment or a new one. If you plan on installing in an existing installation environment, stop all processes from the directory of the existing environment.

See Installation Environment on page 4 for details about installation environment and its properties.

3. Open the physical media or download the TIBCO ActiveMatrix Adapter for Database archive file and extract the archive file to a temporary directory.

Now you are ready to perform installation. See Chapter 3, Installation and Uninstallation, on page 15 for installation procedures.


Installation Requirements | 9

Installation Requirements

This section describes the following requirements for this product:

• Installer Account, page 9

• Disk Space, page 10

• System Memory, page 10

• Supported Platforms, page 10

• Required Software, page 10

Installer AccountBefore you can run the installer on your Windows or Linux system, you must log in as a user with appropriate permissions. The privileges differ for the different platforms.

Microsoft Windows

You must have administrator privileges for the machine on which this product is installed. If you do not have administrator privileges, the installer exits. You must then log out of the system and log in as a user with the required privileges, or request your system administrator assign the privileges to your account.

If you intend to install the product on a network drive, ensure that the account used for installation has permission to access the network drive.

UNIX

Any user can install this product.

• Normal user (non-root)

• Superuser (root).

While installing this product on UNIX platforms, ensure that the same installer account is used to install all TIBCO Adapter products.

A graphic environment such as CDE or X Windows is required to run the installer in GUI mode.



Disk SpaceThe required disk space depends on the platform you use and the software components you select to install. The installer calculates the required disk space in TIBCO_HOME for the selected components. The calculation is done before the actual installation, that is, copying of files to system, begins. The installer proceeds only if sufficient free disk space is available. TIBCO ActiveMatrix Adapter for Database can consume up to 700 MB of free space under TIBCO_HOME.

System MemoryA minimum of 2 GB of physical memory is required.

Supported PlatformsSee the readme file for the supported platforms, versions, and required patches.

Required SoftwareTable 5 lists the required and optional software products.

Table 5 Required Software (Sheet 1 of 4)

Software Description

TIBCO Software

The following software products are distributed and installed separately from this product.

See the readme file for the supported versions.

TIBCO Rendezvous Required. TIBCO Rendezvous is required if you use Rendezvous as the message transport for your adapter.

TIBCO Rendezvous is available as a separate installation, and you must install TIBCO Rendezvous before installing TIBCO Runtime Agent.



TIBCO Runtime Agent Required. TIBCO Runtime Agent is required on each machine that hosts an adapter.

TIBCO Runtime Agent includes TIBCO Designer along with a number of TIBCO and third-party libraries used by the adapter and other TIBCO products.

TIBCO Runtime Agent is available as a separate installation. You must install TIBCO Runtime Agent before you install TIBCO ActiveMatrix Adapter for Database.

TIBCO Database Drivers Supplement

Required. TIBCO Database Drivers Supplement provides the licensed DataDirect database JDBC drivers that can be used with TIBCO ActiveMatrix Adapter for Database.

TIBCO Database Drivers Supplement is available as a separate installation package, and you can install it after installing the adapter.

TIBCO Enterprise Message Service

Optional. TIBCO Enterprise Message Service is required only if you use the Java Messaging Services (JMS) as the message transport for your adapter.

TIBCO Enterprise Message Service sends messages from your applications in a format that conforms to the Java Messaging Service (JMS) specification. TIBCO ActiveMatrix Adapter for Database is not necessarily installed on the machine on which TIBCO Enterprise Message Service is installed.

TIBCO Enterprise Message Service is available as a separate installation package, and you can install it after installing the adapter.

Note: TIBCO Enterprise Message Service is also used by the TIBCO ActiveMatrix SOAP and JMS binding types. The TIBCO ActiveMatrix Adapter for Database license does not cover this usage of the included TIBCO Enterprise Message Service software. You must separately license TIBCO Enterprise Message Service or another supported JMS product for this usage.





TIBCO Administrator Optional. TIBCO Administrator includes the following modules:

• User Management The User Management module manages authentication, roles and users, that is, connecting roles (groups) and users to access control lists (ACLs). This includes security for server-based projects at design time and for deployed applications at runtime.

• Resource Management The Resource Management module monitors machines and all running applications in a TIBCO administration domain. You can create alerts, for example, to notify an administrator if the number of processes or disk usage exceeds a certain number.

• Application Management The Application Management module uploads Enterprise Archive (EAR) files and creates, configures, deploys, and monitors applications. This console is also used to start and stop applications.

TIBCO Administrator is available as a separate installation, and you can install it after installing the adapter.

TIBCO ActiveMatrix BusinessWorks

Optional. TIBCO ActiveMatrix BusinessWorks is required only if you integrate the adapter to the projects created using TIBCO ActiveMatrix BusinessWorks.

TIBCO ActiveMatrix BusinessWorks is a scalable, extensible, and easy-to-use integration platform for you to develop integration projects. TIBCO Adapters are typically part of integration projects created using TIBCO ActiveMatrix BusinessWorks.

TIBCO ActiveMatrix BusinessWorks is available as a separate installation, and you can install it after installing the adapter.





TIBCO Hawk Optional. TIBCO Hawk monitors and manages distributed applications and systems throughout the enterprise. System administrators can monitor application parameters, behaviors, and loading activities for all nodes in a local or wide-area network and table action when predefined conditions occur. In many cases, runtime failures or slowdowns can be repaired automatically within seconds of their discovery, reducing unscheduled outages, and slowdowns of critical business systems.




| 15

Chapter 3 Installation and Uninstallation

This chapter explains how to install and uninstall TIBCO ActiveMatrix Adapter for Database.

Topics

• Installation, page 16

• Uninstallation, page 21


16 | Chapter 3 Installation and Uninstallation

Installation

The following sections describe the installation process in the available installation modes:

• GUI Mode, page 16

• Console Mode, page 18

• Silent Mode, page 19

GUI ModeIn GUI mode, TIBCO Universal Installer presents a series of pages for you to define the installation environment, customize the installation, and complete the installation. Figure 1 illustrates the TIBCO Installation Home page of the installer as a sample. Each page is referenced by its title in the following procedure.

Figure 1 TIBCO Installation Home Page


Installation | 17

To install TIBCO ActiveMatrix Adapter for Database in GUI mode:

1. Run TIBCOUniversalInstaller.

You can do so in one of the following ways:

— Double-click the installer icon.

— On the command prompt or terminal window, provide the absolute path of the installer file without specifying any options. The installer defaults to GUI mode.

2. On the Welcome page, click the Next button.

3. On the license agreement page, read through the license agreement, select the I Accept The Terms Of The License Agreement. radio button and then click the Next button.

4. On the TIBCO Installation Home page, specify the installation environment. See Figure 1.

— Create A New TIBCO_HOME To install the product into a new installation environment, specify the following properties:

Directory (TIBCO_HOME) The directory into which the product is installed. Type a path or click Browse to specify the path or accept the default location.

The path cannot contain special characters such as "*", "#", "?", ">", "<", "%", "&", "$", "`", or "|". The path cannot be the same as the path of an existing environment.

Name (ENV_NAME) Identifies the installation environment. The name cannot contain special characters such as "*", "?", ">", "<", ":", "|", "/", "\", or quotation marks(").

— Use An Existing TIBCO_HOME To install the product into an existing installation environment, select the environment from the drop-down list.

See Installation Environment on page 4 for details about installation environment and its properties.

Click the Next button.

5. On the Installation Profile Selection page, select an installation profile from the list on the left. To explicitly select the components to install, check the Customize Installation checkbox and use the feature tree on the right.

See TIBCO ActiveMatrix Adapter for Database Components on page 2 for the components that are available for installation and the pre-defined profiles you can select.




Figure 2 Installation Profile Selection Page

6. When the Pre-install Summary page is displayed, verify the list of products selected to be installed and then click the Install button to start the installation process.

7. Wait until the installation process stops. Then review the information listed on the Post-install Summary page.

Click the Finish button to complete the installation process and exit the universal installer.

Console ModeTo install this product in console mode:

1. On the command prompt or terminal window, navigate to the absolute path where the TIBCO ActiveMatrix Adapter for Database archive file is extracted.

2. Run the following commands:

— Windows TIBCOUniversalInstaller.cmd -console

— UNIX ./TIBCOUniversalInstaller-platform_acronym.bin -console

3. Complete the installation by responding to the console window prompts.


Installation | 19

Silent ModeIn silent mode, TIBCO Universal Installer does not prompt for any inputs during installation. Instead, the installer reads inputs from a response file that you can provide as a command-line parameter. If no parameter is specified, the installer uses the default TIBCOUniversalInstaller_adadb_version_number.silent file.

The TIBCOUniversalInstaller_adadb_version_number.silent file is packaged in the directory that contains the installer. Edit the file with information for your environment before launching the silent installation. The file includes comments that describe the installation properties you can set. While you can use the TIBCOUniversalInstaller_adadb_version_number.silent file, it is good practice to copy the file to a different name and use that file for the silent install.

If errors occur during installation, they will be listed in the installation log file located in the User_Home/.TIBCO directory.

To install TIBCO ActiveMatrix Adapter for Database in silent mode:

1. Open the physical media or download the installation package.

2. Extract the contents of the package to a temporary directory.

3. Navigate to the temporary directory by using a console window.

4. Make a copy of the TIBCOUniversalInstaller_adadb_version.silent file and rename the file.

5. Open the copied file by using a text editor, and update the install location, ENV_NAME, and features to install as follows:

— Update the install location TIBCO ActiveMatrix Adapter for Database must be installed in the same directory where other TIBCO adapters are installed. For example, update the directory as follows:<entry key="installationRoot">C:\tibco</entry>

— Update the ENV_NAME TIBCO ActiveMatrix Adapter for Database must use the same ENV_NAME that other TIBCO adapters use.

For example, update ENV_NAME as follows:<entry key="createNewEnvironment">false</entry>

<entry key="environmentName">TIBCO_HOME</entry>

— Update features to install Set the features that you want to install to true as follows:<entry key="feature_Adapter_adadb">true</entry>

<entry key="feature_Palette_adadb">true</entry>

<entry key="feature_Samples_adadb">true</entry>

<entry key="feature_ADB Documentation_adadb">true</entry>




Windows TIBCOUniversalInstaller.cmd -silent -V

responseFile="myfilename.silent"

UNIX TIBCOUniversalInstaller.bin -silent -V

responseFile="myfilename.silent"


Uninstallation | 21

Uninstallation

The following sections describe the uninstallation process in the available installation modes:

• GUI Mode, page 21

• Console Mode, page 22

GUI ModeTo uninstall this product in GUI mode:

1. Shut down all running TIBCO applications.

2. On the command prompt or terminal window, navigate to TIBCO_HOME/tools/universal_installer and run TIBCOUniversalInstaller without specifying any options. The installer defaults to GUI mode.

3. On the TIBCO Installation Manager page, perform the following steps:

a. Select the Uninstall Products From A TIBCO Home Location radio button.

b. Select the TIBCO_HOME location from the TIBCO Home Location drop-down list.

c. Click the Next button.



Figure 3 TIBCO Installation Manager Page

4. On the Welcome page, click the Next button.

5. Choose an uninstallation option. The installer provides two uninstallation options:

— Custom Uninstall You can select the products to be removed.

— Typical Uninstall The universal uninstaller removes all the products in this TIBCO_HOME.


6. If you selected the Custom Uninstall (Select The Products To Be Removed) radio button, on the Product Uninstall Selection page, check the checkboxes for products to uninstall, and then click the Next button.

7. When the Pre-uninstall Summary page is displayed, verify the list of products selected to be uninstalled and then click the Uninstall button to start the uninstallation process.

8. Wait until the uninstallation process stops. Review the information listed on the Post-install Summary page and click the Finish button to complete the uninstallation process and exit the installer.

Console ModeTo uninstall this product in console mode:


Uninstallation | 23

1. On the command prompt or terminal window, navigate to the TIBCO_HOME\tools\universal_installer directory.


— Windows TIBCOUniversalInstaller.exe -console

— UNIX ./TIBCOUniversalInstaller-platform_acronym.bin -console

3. Complete the uninstallation by responding to the console window prompts.


| 25

Chapter 4 Post-installation Tasks

This section explains the tasks that you need to complete following the TIBCO ActiveMatrix Adapter for Database installation.

Topics

• Post-installation Tasks on Microsoft Windows Platforms, page 26

• Post-installation Tasks on UNIX Platforms, page 28


26 | Chapter 4 Post-installation Tasks

Post-installation Tasks on Microsoft Windows Platforms

Before running TIBCO ActiveMatrix Adapter for Database on Microsoft Windows platforms, you need to complete the following tasks:

• Configuring the Database Account Used by the Adapter, page 26

• Configuring the Adapter in TIBCO Designer, page 27

• Installing Additional TIBCO Software, page 27

Configuring the Database Account Used by the AdapterSQL scripts are provided to set up the database account used by the adapter. The TIB_ADADB_HOME\config directory contains subdirectories for supported databases. Each subdirectory contains one or more scripts that are specific to that database vendor.

1. Open a command window and change directory to your database directory. For example, for Oracle:

cd TIB_ADADB_HOME\config\oracle

2. Change the create_user script by using a text editor to identify the account name and password for the database user who will run the adapter. If you are using Oracle and will be using the alerter, also provide the account name to use. For example, for Oracle:

CREATE USER karlh IDENTIFIED BY adbuser;GRANT CONNECT, RESOURCE TO karlh IDENTIFIED BY adbuser;

-- For Alerter use onlyGRANT EXECUTE on DBMS_AQ to karlh;GRANT EXECUTE on DBMS_AQADM to karlh;

This account is used to connect to the database and access tables created when configuring an adapter. Note that a publication source table or subscription destination table can belong to a different schema than the default specified in the create_user script. For more information, see TIBCO ActiveMatrix Adapter for Database Configuration and Deployment.

3. Execute the create_user script as the database administrator. For example, for Oracle:

The create_user script creates a database user account with the necessary privileges required for the adapter. If you are using Oracle and will be using the alerter, this user also needs the privilege to access the alerter package.


Post-installation Tasks on Microsoft Windows Platforms | 27

sqlplus dba_user_id/dba_password@service @create_user.sql

4. If you are using Oracle and will be using the alerter, also execute the alerter.sql script. This script sets up the tables used by the alerter. Use the database user account created in step 2. For example:

sqlplus dba_user_id/dba_password@service @alerter.sql

Configuring the Adapter in TIBCO Designer

When configuring the adapter instance in TIBCO Designer, you need to add the JDBC driver file to the adapter installation library directory: TIB_ADADB_HOME\lib

For example:

For Teradata database:TIB_ADADB_HOME\lib\tdgssconfig.jarTIB_ADADB_HOME\lib\terajdbc4.jar

For PostgreSQL database:TIB_ADADB_HOME\lib\postgresql-9.0-801.jdbc3.jarTIB_ADADB_HOME\lib\postgresql-9.0-801.jdbc4.jar

Installing Additional TIBCO SoftwareIf you will be using any of the following TIBCO products, install them now. These products are not provided with TIBCO ActiveMatrix Adapter for Database.

• TIBCO Administrator™

• TIBCO ActiveMatrix BusinessWorks™

The step applies PostgreSQL and Teradata databases.



Post-installation Tasks on UNIX Platforms

Before running TIBCO ActiveMatrix Adapter for Database on a UNIX platform, you need to complete the following tasks:

• Setting Directory Permissions, page 28

• Configuring the Adapter in TIBCO Designer, page 28

• Installing Additional TIBCO Software, page 29

Setting Directory PermissionsDepending on whether a repository server is used, and whether TIBCO Administrator is used to set access permissions, users may need a TIBCO Administrator account. See your TIBCO Administrator guide for details.

Make sure that all adapter users have read, write, and execute permissions for the following directories where the adapter files and configuration information are stored:

TIB_ADADB_HOME/bin TIB_ADADB_HOME/logsTIB_ADADB_HOME/sqlTIBCO_HOME/tra/TRA_version/logs

For example, if you install the adapter in /opt/tibco, you can make these directories writable for all other users by executing the following commands:

% chmod a+w /opt/tibco/adapter/adadb/version/bin% chmod a+w /opt/tibco/adapter/adadb/version/logs% chmod a+w /opt/tibco/adapter/adadb/version/sql% chmod a+w /opt/tibco/tra/TRA_version/logs

Configuring the Adapter in TIBCO Designer

When configuring the adapter instance in TIBCO Designer, you need to add the JDBC driver file to the adapter installation library directory: TIB_ADADB_HOME/lib

For example:

For Teradata database:TIB_ADADB_HOME/lib/tdgssconfig.jarTIB_ADADB_HOME/lib/terajdbc4.jar

The step applies to PostgreSQL and Teradata databases.


Post-installation Tasks on UNIX Platforms | 29

For PostgreSQL database:TIB_ADADB_HOME/lib/postgresql-9.0-801.jdbc3.jarTIB_ADADB_HOME/lib/postgresql-9.0-801.jdbc4.jar

Installing Additional TIBCO SoftwareIf you will be using any of the following TIBCO products, install them now. These products are not provided with TIBCO ActiveMatrix Adapter for Database.

• TIBCO Administrator™

• TIBCO ActiveMatrix BusinessWorks™


| 31

Appendix A Installed Files Reference

This appendix lists the directories and files under TIB_ADADB_HOME after installation of the adapter.

Topics

• Installed Directories and Files, page 32


32 | Appendix A Installed Files Reference

Installed Directories and Files

Table 6 lists the directories and files under TIB_ADADB_HOME after installation of the adapter.

Table 6 Installed Directories and Files

Directory Description

bin Wrappers and sample TRA properties files for configuration of services.

config Configuration scripts and SQL statements for the adapter alerter function.

demo Examples provided with the adapter. This directory consists of two subdirectories:

• The Getting Started examples. See "Getting Started" in TIBCO ActiveMatrix Adapter for Database Configuration and Deployment for the procedures on running the examples.

• The examples that show how to use the adapter’s services within a TIBCO ActiveMatrix BusinessWorks process. See TIBCO ActiveMatrix Adapter for Database Examples for details.

doc Documentation of the adapter. Two formats are available in two subdirectories:

• html: HTML help.

• pdf: PDF help.

lib The adapter library files.

logs Log files used by the adapter.

setup post-install.xml

sql Stores all SQL statements created during the configuration of the adapter.

tools This folder is newly added in this release, which contains migration tool and dependent files that help move data between software programs, such as transferring adapter projects from older to newer versions.

Currently the migration tool can only migrate old projects in TIBCO ActiveMatrix Adapter for Database 6.x.

If this is the first adapter installed under TIBCO_HOME, TIBCO Adapter SDK will also be installed to the TIBCO_HOME\adapter\sdk directory.


| 33

Index

C

console mode 3, 18, 22

D

disk space requirements 10

E

ENV_NAME x, 4, 17

G

GUI mode 3, 16, 21

I

installation environmentdirectory 4, 17name 4, 17

installation logging 5installation modes

console 3, 18GUI 3, 16silent 3, 19

installation profilestypical 2

installation requirementsdisk space 10installer accounts

Microsoft Windows 9UNIX 9

software 10supported platforms 10system memory 10

installeddirectories 32files 32

P

pre-installation procedure 8product components 2

R

related documentation viii

S

silent mode 3, 19software requirements 10system memory requirements 10

T

TIB_ADADB_HOME xTIBCO support

contacting xiiiTIBCO documentation xiiiTIBCOmmunity xiii


34 | Index

TIBCO_HOME x, 4, 17typographical conventions x

U

uninstallation modesconsole 22GUI 21

uninstallation procedure 21

tibcoactivematrix adapterfor database installation · 2013-07-30 · installed into an installation...

Documents