tiger8 cranes 0 - media.50below.com
TRANSCRIPT
T I G E RC R A N E S
The Tiger Crane 8051 was designed and built to provide theservice technician an enhanced level of speed, control, safetyand usable length. The 8051 cranemoves to a working position quickly,and then uses the exclusive Auto IISpeed load sensing system to automatically reduce all functionspeeds when a load issensed. The Auto II Speedsystem also increases thefeel and control of theproportional system, byusing the full resolution of thetrigger to control the lower speed.The hydraulic planetary winch, utilizingan axial piston motor provides unequaled low speed control, yet will spool to 70 ft/min. The valve system utilizesintegrated 9 micron absolute filtration to clean all thehydraulic oil before it enters the crane, ensuring contaminant freeoperation of valves and motors. Hex Boom Design incorporatesthe use of high tensile strength steel for greater strength andreduced weight. A double reduction rotation package provides400’ of rotation, and the strength to rotate the rated lift capacityup an incline. Wireless proportional controlfeatures frequency hopping technology forinterference free use, and includes a 33 fttether cord that can be used instead of batteries,or in areas where radio use is not permitted.Indicator lights provide direct feed back on craneoperation including radio link, overload condition,speed, anti two block, filter bypass, and valve operation.
8051
8051
Standard Features:• 50,000 ft/lbs rating• 8600 lbs lift @ 5.8 ft • 21 ft of hydraulic reach• 70 ft/min unloaded line speed• Auto II Speed load sensing • Proportional Control• Wireless Remote & Tether• Integrated Filtration• Powder Coated Components
877 1ST AVE NWSIOUX CENTER IA 51250 1-800-225-8789FAX: 712-722-3706www.tigercranes.com
TIGER Model 8051 Specifications
Crane Rating: 50,000 ft/lbs
Maximum Reach: 21 ft from CL
Extension: Single hyd from 12 to 21 ft
Maximum Height: 22.5 ft from base of crane
Maximum Lift: 4300 lbs single part line
8600 lbs double part line
Boom Elevation: -5 to +75 degrees
Cable: 3/8 x 120 ft DGAC 6x36 IWRC
Winch Type: Hyd planetary with axial piston motor
Winch Speed: 70 ft/min*
Rotation: 400 degrees with double reduction
(worm & pinion)
Control: Wireless proportional with 33 ft
Tether cord
Stowed Height: 36"
Weight: 1750 lbs (crane only)
Mounting Space: 22" x 22"
Valves: 12 VDC D03 12 GPM
Filter: 9 Micron Absolute
Pump Req’d: 8 GPM @ 2700 PSI
Min Chassis GVW Req’d: 19,000 lbs
*Speed represented is with recommended pump and an unloaded single line.
TIGERCRANES
Designed and Mfg in the USA byLocal Distributor
Service Trucks International
Rev 10.05/3k