time saver industries · don’t dress your seed until you need it. the innoculator is a self...
TRANSCRIPT
Phone: 08 9686 1119 Mob: 0428 86 1119 email: [email protected]
For more information contact:
Pete Munns TSI Beacon PO Box 16 Beacon WA 6472
The Innoculator is manufactured in
Beacon in the Central Wheatbelt of
Western Australia. What started out as a
solution for a farmer trying to dress his
seed the Innoculator has evolved to
become a valuable machine for farmers
across Australia.
To see the Innoculator working go to
www.scudagchem.com.au and click
on the video
For more information go to
www.scudagchem.com.au
Or call Pete Munns 0428 86 1119
TSI Beacon
Time Saver Industries
Manufactured in Western Australia
TSI Beacon is a family owned business living in rural Australia supplying and supporting other small business in Australia
Give yourself some flexibility Don’t dress your seed until you need it.
The Innoculator is a self contained seed dressing
unit, designed to take the hassle out of seed dress-
ing. It’s been designed, to be used in conjunction
with an auger, which will mix the product into the
grain as it travels up the auger.
In tests held by the Kondinin Group in 2002 the In-
noculator achieved a 92% seed coverage rate, one
of the highest of all the machines tested.
I240v Innoculator 12 volt The Innoculator
The Innoculator is a simple self-contained seed
dressing unit, designed to take the hassle out of seed
dressing. It’s been designed, to be used in
conjunction with an auger, which will mix the
product into the seed as it travels up the auger.
There are 2 types of Innoculator Petrol and 240 volt
The main features are;
- 100ltr calibrated tank
- The revolutionary “Waterfold” mixing action
- 180 l/min 240 volt electric pump or petrol pump
- 3-way ball valve on outlet for agitate and delivery
- 3/4 mini ball valve for setting product rate
- 4m discharge hose
- Easy to clean out for product change over
- Light weight and easy to lift (approx 20kg)
- 3-way tap for suction fill.
Spray Bar
The spray bar allows you to apply seed dressing
through jets or an orifice plate using pressure to
regulate the flow. The spray bar is set up on the 1”
socket using a hose clamp with the spacer provided
that allows the spraybar to be put on and off as you
need it. The Spraybar comes with it’s own filter mesh
which is behind the 3/4” cap. If you require better
filtration a 3/4” filter can be fitted on the Innoculator
IWX15 Innoculator Petrol
Self filling 3-way ball valve
The Innoculator comes with a three way ball valve
on the inlet that allows the Innoculator to fill itself.
All you need is a 1” hose from a water source (fire
fighter), this also enables quick and easy clean out
and flushing between tanks. You can also flush the
pump/outlet hose with clean water while leaving
left over product in the Innoculator tank.