tire shiner equipment package - car wash - kleen-rite … · tire shiner equipment package perfect...

514 All Prices are F.O.B. and Are Subject to Change Without Notice w No C.O.D.’s1-800-233-3873 w (717)684-6721 w FAX (800)446-0495 w www.kleen-ritecorp.com

Tire Shiner Equipment PackagePerfect tires every time with the revolutionary Tire Shiner and Pad Perfect Tire Dressing!

Package Includes:• Tire Shiner• Electric Sign• Pedestal• Electric Sign Face (Tire Shine)• 2 Tire Shine Windmasters• 1 30 gallon drum of Pad Perfect

What Tire Shiner™ Delivers• Eliminates labor• Shines better, lasts longer• Stops hazardous slipping• Controls cost• Now available for Touchless In-Bay Automatics

What Pad Perfect™ Delivers• A non solvent tire dressing• Viscosity perfectly matched to porosity of our Tire Shiner™ pads• Absorbs into the fiber of the pad, creating the perfect environment to dress oversized and low profile tires

DR30264

$$

ElectricOval Sign

and Pedestal

Replacement Foam Pads/Rails - Set of 4

CALL FOR PRICE

SMTS200 SMTS275

$$ $$

C-Style Concave Pads 48” Top Feed

30 gallon drum Pad Perfect

INSTALL INYOUR IN-BAYAUTOMATIC

515All Prices are F.O.B. and Are Subject to Change Without Notice w No C.O.D.’s1-800-233-3873 w (717)684-6721 w FAX (800)446-0495 w www.kleen-ritecorp.com

Easy Clean Car Wash Foam Generator

More Foam - More Show - Complete CoverageThe easy clean generator is a new revolutionary foam generator that takes the trouble out of cleaning all your chemical application foam genera-tors. The unique features of the easy clean generator will allow you to clean and service your foam generators in seconds, there are no tools needed since there is no fittings to take apart or any air and chemical lines to disconnect. The media is made up of two types: One that mixes and one that foams. There is no need for the needle valve or check valves because the media is suspended to the twist off cap and by this the media does not compress in the foam Chambers, creating unpredictable back-pressure and flow resistance. To make the installation a snap each unit comes with direct fit air and chemical fittings and outlet sizes to fit your applicators.

• Cleans in seconds, not minutes• Uses less chemical to create a dramatic show of foam, color and scent that your customers will love and come back for over and over again!• Reduce expenses in labor, water and chemicals!

NWFG100 16” Turbo Foam Generator $$NWFG100-I Insert for 16” Turbo Foam Generator $$NWFG105 10” Bay Foam Brush Generator $$NWFG105-I Insert for 10” Bay Foam Brush Generator $$

NWFG-M Mount for Foam Generator $$NWFG110 Elephat Ear Foamer (Set of 2) $$

NWFG110-FT Foam tube for Elephant Ear Foamer $$NWFG110-MK Mounting Kit for Elephant Ear Foamer $$

NWFG115 Single Elephant Ear Foamer $$

10” Bay Foam Brush GeneratorFor Self Serve BaysComes Standard with:3/4” Female Output Fitting3/8” Air Push Lock Fitting 1/2” Chemical Push Lock Fitting 16” Turbo Foam GeneratorFor Tunnel ApplicationsComes Standard with:1” Male Output Fitting3/8” Air Push Lock Fitting 1/2” Chemical Push Lock Fitting


Hydro-SprayClassic & Rainmaker Carriage Replacement Parts6 Ring Center PodAssembly

Lap Switch AssemblyReplaces Mech. Switch

Ground Brush Assy.For Center Pod

Bronze Pipe Clamp 1/2”

Water SupplyFor 22 ft. Track

Brush AssemblyFor Center Pod

Insulating Tube For Center Pod

Center Pod Cover

HSBA93014

HSEF22001

HSSA92211

HSBA93016

HSBA93019

HSBA93015

$$

$$$$

HSBA93020

HSSA95010

Knife Disconnect For Center Pod Ring with Wire

For Center Pod

HSBA93017

HSBA93018

$$

$$ $$

$$

$$

$$

$$

Pancake Sensor MountBracket

HSAP12332 $$

Castle Nut

HSCS82153A $$

Drive Shaft Inner Disc

HSAP12312 $$

Drive Shaft Outer Disc

HSAP12313 $$

1/4” Bushing

HSBS12018 $$

Sprocket

HSBS12017 $$

Chain Track Coupling

HSBS12016

$$

HSBS12019

$$

per ft.

Cover Track


Hydro-SprayRainmaker Carriage Replacement PartsBanner Sensor Housing

HSAP12359

Drive Shaft Roller

HSAP12311 $$

Carriage PillowBlock Bearing

Photo Eye Heater

HSBS12031

$$

GroovedRubber Rollers

HSAP12344

$$

HSEC11681

Thermal DiskFor Photo Eye Heaters

Encoder Wheel

HSAP12339A

$$

Plastic w/Stainless Inserts

New Swing Arm End

HSAP12302A

$$

New Swing Arm Center

HSAP12303A

$$

Banner Photo Eye Emmitter

$$BPS1040

Roller SlidePlate

HSAP12314

$$

Proximity Switch

(Turck/PNP/Modicon)

TPS1045

$$

12 mm Encoder(Turck/PNP/Modicon)

HSP11606 $$

PhotoeyeHousing

Top

HSAP12357A

$$

PhotoeyeHousingBottom

HSAP12357B

$$

Worm GearReducer

HSBS12000

$$

Photo EyeExtension

HSAP12350

$$

1 HP Wash Down Motor

CALL

HSEM17236

HSAP12360

$$

Upright ExtensionBracket Cover

$$

$$

$$

HSEC11679


HSSA95000T-1 Turbo Wash Tower WITHOUT Water Supply 110/208 VAC Single Phase Motor $$0.00

HSSA95000T-1LTurbo Wash Tower WITH Water Supply LONG Version (Fits 9’ x 22’ 8” Track) 1

110/208 VAC Single Phase Motor$$0.00

HSSA95000T-1STurbo Wash Tower WITH Water Supply SHORT

Version (Fits 9’ x 22’ Track) 110/208 VAC Single Phase Motor

$$0.00

HSSA95000T-2 Turbo Wash Tower WITHOUT Water Supply 208/240VAC 3 Phase Motor $$0.00

HSSA95000T-2LTurbo Wash Tower WITH Water Supply LONG Version (Fits 9’ x 22’ 8” Track)

208/240VAC 3 Phase Motor$$0.00

HSSA95000T-2STurbo Wash Tower WITH Water Supply SHORT

Version (Fits 9’ x 22’ Track) 208/240VAC 3 Phase Motor

$$0.00

ClassicTower

Classic Tower

RainmakerTower

Rainmaker Tower

TurbowashTower

Turbowash Tower

Hydro-SprayClassic & Rainmaker Tower Parts

Hydro-SprayReplacement/Upgrade Towers

HSWN92153A $$

Rubberized Wand

Strike Plate

$$

HSCS83311X

BPP Idler Pulley

HSBS21055

$$

FCSE18 $$

Rosta LovejoySE

3/4 HP Motor

HSEM17300 $$

Stainless Bearing4 Bolt Flange

HSBS21001

$$

Door Catch

$$HSCS83310X

Tensioner ArmRosta Lovejoy SE

HSBS30319 $$

System Improvements• Wash Down Motors• Mosmatic Stainless Swivels• Low Profile Rubber Coated Wands w/ Nozzles• Centralized Grease System• Stainless Quick Release Latches for Easy • Removal of ABS TowerCovers for Maintenance• Removeable Tower Covers for Easy Maintenance

Familiat Upgrades• Stainless Frame• ABS Tower Cover Set (grey) w/ Decals• High Pressure Nozzle Kit• Water Supply Kit• Extra Tube of Grease

HSSA95000CL Classic Tower WITHOUT Water Supply $$0.00

HSSA95000CL-L Classic Tower - LONG - WITH Water SupplyFits 9’ x 22’ 8” Track $$0.00

HSSA95000CL-S Classic Tower - SHORT -WITH Water SupplyFits 9’ x 22’ Track $$0.00

HSSA95000R Rainmaker Tower WITHOUT Water Supply $$0.00HSSA95000R-W Rainmaker Tower WITH Water Supply $$0.00

PLEASE

MEASURE

TRACK BEFORE

ORDERING!


Hydro-SprayClassic & Rainmaker Tower PartsHQ 5/8” Bushing

HSBS30026 $$

5/8” Bushing

HSBS30342 $$

Rubber Drive Roller

40 Chain Sprocket Bearing Housing

HSAP92016

HSBS30238 HSAP95114

$$

Ext. Inner RingBearing ER

HSBS21005

HSBS21005F

Vertical Spindle3 Hole (Short 6½”)

HSAP95140W $$

Shaft Spindle Bearing1 3/16”

Tower Drive Shaft

HSAP95130

Upper HorizontalCover Shadow Gray

$$HSAP95605

Lower Horizontal Cover Shadow Gray

$$HSAP95610

Tower Inside Leg Shadow Gray

$$

Tower Outside Leg Shadow Gray

$$HSAP95615 HSAP95620

Rubber Idler Roller

HSAP92017 $$

Tower IdlerShaft

Tower Motor Plate

HSAP95131

HSAP95135

$$

$$ $$

$$ $$ $$ $$


Tensioner BracketAssy. For Tower

HSSA95197

$$

Danfoss Coil HSDF00007

$$

1/2”

HSDF00005

$$

Heater For Danfoss Valve

HSEC11680 $$

DanfossSolenoid BlockNormally Open 1 Station

C60N 1 Pole SupportProtector

HSEC12850

$$

MB+ Optical Adapter

HSEC12867 $$

Hydro-SprayRainmaker Tower Parts

Hydro-SprayMiscellaneous Parts

Idler Shaft Inner Disc

HSAP95134 $$

Gearbox ReducerHSBS30495

$$

Guide Roller

HSAP92100 $$

(Used for ALL Rainmakers, Classics and Older Hydro-Spray Wash Systems)

Deublin 3/4” Swivel

SW1600

$$

Tri Foamer Head18 Hole Unit3/8” FPT

Multi-PurposeFoam Generator3/8” FPT

14mm Wide - 24VACContactor/Relay Module

6.2 Narrow - 24VACContactor/Relay Module

HSMPPV48300TFSA001$$$$

Deublin 1/2” M x 3/4” F Swivel

SW1650

$$

Time Delay Relay

Busbar Pack (3 PK)

HSEC12925 $$

Tri Foamer Head31 Hole Unit 3/8” FPT

$$

TFSH31

Power Cord For Tower - 20’ - 14 Gauge

6 Strand

HSAP92198 $$

HSTM13608

$$

HSEC12961

HSEC12962$$ $$



(Used for Rainmaker, Classic and Older Hydro-Spray Wash Systems)

1” Normally Closed Solenoid 12OV

Wall Mount Hose Bracket for Auto Bay

$$HSAP99501

SOD418P120

$$

11 Pin Socket(Telco)

TLR1105

$$

Control Cable12 Gauge 4 Conductor

HSEC11665 $$

1 ChannelMultiplexer

TPPA0324VDC

$$

1/2 HP3 Phase Motor

MWD411 $$

SQD 24 VDC 2 A Power Supply

HSEC14207

$$

Cable20 GA/18 COND

HSEC11668

$$

per foot

1/4” Split Taper

PL0027$$

3¾” Double Pulley

PL0150

$$

3¾” Single PulleyPL0115

$$

Treadle Switch Dual

HSP92208

$$

I/O Base Analog 170AAI MOMNTM

$$

MB + RS485 Term Resistor

$$

HSEC12894

HSEC12901


Bevel GearboxRight Angle

HSBS30505

$$

Cog Belts


Hydro-SprayDecals and Signs

(Used for Rainmaker, Classic and Older Hydro-Spray Wash Systems)

Rainmaker Clearance Sign

HSSN20000 $$

Fold In Mirrors Decal

HSSN40050

$$

Stop Decal

HSSN40620 $$

Attention & Direction Sign

HSSN55120

$$

Rainmaker Carriage Sign 30” x 120” HSSN90802

$$

BLCBX100 BX100 Cog Belt $$BLCBX38 BX38 Cog Belt $$BLCBX50 BX50 Cog Belt $$BLCBX61 BX61 Cog Belt $$BLCBX84 BX84 Cog Belt $$

Hydro-SprayOld Style Classic Tower Parts

Roller Guide Arm

$$

3 Hole Short Spindle/Old Tower 1¼”

$$

2 Hole Short SpindleOld Tower

HSAP92002 $$HSAP92011 HSAP92003HSAP91398 $$

Idler Shaft Old Tower/Welded Plate


Air CylinderAll machines & Thrust Pro Dryer Follower Nozzle Lift.

RY100

$$

Rod ClevisUsed on all brushes EXCEPT wheel scrubbers.

RY105 $$

Single Eye MountTwo Used on each brush air cylinder.

RY110 $$

Double Eye MountBolts to rear end of brush air cylinder.

RY115

$$

Touch PadWith “D” plug, entry system. Used in a multi-upgrade coin box.

RY130 $$

Rod Clevis PinStainless steel pin used to connect bolt both ends of brush air cylinder to mounts.

RY120

$$

Water ValveAquamatic, 1” NC, for R7B, Voyager

RY161 $$

Water ValveAir operated Aquamatic, 1” with 1/4” Side Tap. Supplies water to car wash.

RY160 $$

Drive WheelUsed on R7B and Voyager car washes only.

RY169 $$

Idler Wheelfor all Ryko machines.

RY170 $$

Drive Wheelfor Voyager II, SoftGloss XS, Monarch II, U.S. 201, Select-A-Wash.

RY174

$$

Water Valve Repair Kit - Aquamatic 1”

RY165 $$

For RY160 and RY161

Repair Kit: RY165

Repair Kit: RY165

Ryko™ Replacement Parts


Part Size Usage Price

RY230 1” For Top Brush, All Machines $$

RY240 1¼”

For Drive Wheel, R7B,

Voyager, Front Brush Shafts/All Machines

Except 42” on SoftGloss XS.

$$

RY245 1½” For All Tall Rear Brushes $$

2 Bolt Bearing

Mac-RegulatorLeft Side of Air Manifold Voyager II, SoftGloss XS, Select-A-Wash.

RY506B

$$

2 Bolt BearingPillow block bearing 1 1/4” wheel bearing for Voyager II, SoftGloss XS and Select-a-Wash

RY241

$$

Brush Shaft

Part Size Usage Price

RY310 1¼”

Front Side Brush Shaft.

Except 42” on SoftGloss XS.

Select-A-Wash

$$

RY315 1½”Tall Rear Brush

Shaft. All Machines.

$$

RY320 1”

Top Brush Shaft- All

Machines, Except

SoftGloss XS, Select-A-Wash

$$

Air SolenoidBlower OscillatorAir Solenoid, Mac Valve 45A-LOO-DACA-1BA for Voyager II, SoftGloss XS, Select-A-Wash

Air SolenoidAir Solenoid, Mac Valve 35A-B00-DACA-1BAfor most functions on Voyager II, SoftGloss XS, Select-A-Wash

Drive Wheel Gear BoxUS2001, Select-A-Wash, Some SoftGloss XS. 6 month warranty.

RY769F $$

RY769B $$

Drive Wheel Gear BoxVoyager II, Monarch II, Some Soft-Gloss XS, 6 month warranty.

Torque ArmAttaches to and secures drive wheel gearbox on most machines. Hot dipped.

RYM118

$$

Spray Arch SwivelSpray arm swivel for Monarch II Hi-Impact

RYM129

$$

RYM131

$$

Mercury SwitchTreadle switch, attaches to trip bar for all machines.

Treadle SpringLeft or Right side, lifts trip bar for Voyager II, SoftGloss XS, Select-a-Wash

RYKO™ REPLACEMENT PARTS

RY769D

$$

RY504

$$

RY506A

$$


GantryTiming Belt1” x 28”. Long, runs full length of track on both sides, pulls gantry.

$$

RYUS45

TrolleyTiming Belt1” x 167”. Long, pulls trolley from left to right

GantryBelt1” x 28’, OHD

RYUS40RYRUS45

$$$$

Drive SprocketBuilt before 2002, for VT2000 and Mac Neil.

RYVT150 $$

“The Original Neoglide”Neoglide Foam Brush Retro Kits - Convert any bristle machine with this easy to install slide in C-Channel design. Extremely gentle, soft and durable. 75% lighter than cloth means longer life for equipment! No water or grit absorption!

Part Description

RYNEO1 R7B w/Pinwheel – 4 side brushes, top brush

RYNEO2 R7B w/2 front side brushes, 2 tall rear & top brush

RYNEO3 Voyager w/2 front side brushes, 2 tall rear & top brush

RYNEO4 Voyager II Bristle w/2 front side brushes, 2 tall rear & top brush

RYNEO5 Voyager II cloth or Foam Brite, w/2 front side brushes, 2 tall rear & top brush

RYNEO6 SoftGloss XS w/30” front brush, 2 front side brushes, 2 tall rear & Top brush

RYNEO7 SoftGloss XS w/42” front brush, 2 front side brushes, 2 tall rear & Top brush

CALL FORPRICES

Ryko™ Replacement PartsComplete TreadleRight Side

Gear BoxLeft Front, 25 -1, Flange Shaft, L. Output, Softgloss, Left on Nova & Left Rocker on VT2000

Gear BoxRight Front, 25 -1, Flange Shaft, R. Output, Softgloss, Right on Nova 2000, Right & Left on Wrap VT2000, Right Rocker, On VT2000

Gear BoxFor Foam Brite 30” Right Front, Tall Left Rear Brush, Top Brush, 1”, L. Output, 25-1, VOY II, Softgloss XS, VT2000, Rocket, Sel-A-Wash

Gear Box For Foam Brite, 30” Left Front, Right Rear Tall Brush, 1”, R. Output, 25-1, VOY II, Softgloss

Motor1 HP, 3PH, TEFC, Drive for R7B, VOY II, Softgloss, US2001, VT2000 Wrap, Wheel Scrubber, Nova,2000, Trolley & Rotate on Mon. Hi Impact, w/Blaster on Some Softgloss

RYM220

RY385 RY769G

RY769H

RY769I RY769J

$$

$$ $$

$$

$$ $$

526

BB1000

TrolleyDrive Belt

BB1001

BridgeDrive Belt

BB1002

ArchEncoder

BB1003

BridgeEncoder

Manifold Block1st Breakaway

Swivel

BB1004

TrolleyEncoder

Breakaway Assembly Bolt

Bridge BearingMain Drive Shaft

Lower Bearing Central Bridge Frame

Closed Cover

Upper BearingCentral Bridge Frame

Bridge & Dryer Shaft

Bronze BoltSpray Arch

Gear Box Sensor

Inductive Mag

BB1005

BB1009

BB1006

BB1011

BB1007 SWM40936

BB1012

BB1008

BB1013

Frequency Drive Trolley Bridge

Spray ArchNotProgrammed

Bridge Idler Roller Driver SideTrolley Shaft

Outer Roller TrolleyInner Roller Trolley

Manifold Block 1st Breakaway

Bridge Rollerw/Belt Relief

Laserwash G5™ Replacement Parts

$$

$$

$$

$$

$$

BB1014

Bridge & Dryer Guide Roller Shaft

$$

$$ $$ $$ $$ $$

BB1016

Bridge Frame Shaft

$$

BB1017

Idler Roller Shaft Bridge

$$

BB1018

Bridge & Dryer Roller Delrin

$$

BB1019

Trolley Retainer Roller

$$

$$ $$ $$ $$

$$ $$

$$ $$ $$ $$

BB1023

BB1010

Trolley Retainer Roller

$$

BB1015

BB1020 BB1022 BB1024 BB1025BB1021

$$


Southern Pride® Replacement PartsDrive Shaft Assembly Idler Shaft Assembly

Bearing Housing Assembly

Brass Spindles Skytracker Idler & Drive Wheel

Roller Guide Assy.

Disc Assembly Driver Roller & (2) 8” Drive Discs

1” Castle Nut

Drive Assembly Plate

6” Idler Disc & Roller

8” Drive Roller Disc Drive Roller

SP2135 SP2130

SP2110

SP2105

SP2100

SP0019 SP0021

SP2115

HSCS82153A

HSAP92017

SP2140

HSAP92016

$$ $$

$$

$$

$$

$$

$$

$$

$$ $$ $$

$$

2 HoleSouthern Pride # 370203

3 HoleSouthern Pride # 370205

Southern Pride # 370908




Southern Pride # 247033, 247038


Southern Pride # 372663, 247037, 247039

Southern Pride # 247037, 247039

Southern Pride # 372264A, 247033, 247038 SP2125 $$

SP2150 $$


Proximity Switches Telemechaniquefor use in Automatic Car Washes

Part # MFG # Description Price

STP2110 XS1M30MA230K 3-Pin/ 10mm Sensing Distance/ 30mm Dia $$

STP2080 XS530B1NAM12 M12 Connector/ 10mm Sensing Distance/ 30mm Dia $$

STP2030 XS1N18NA349D 4-Pin/ 10mm Sensing Distance/ 18mm Dia $$

STP31 NBN15-30GM50-E2 3-Pin/ 30mm Dia $$

STP32 NBN1530GM50EOV1 4-Pin/ 30mm Dia $$

STP2040 XS3P30MA230 Cable/ 10mm Sensing Distance/ 30mm Dia $$

STP2050 XS3P30PA370L2 Inductive Sensor 24VDC $$

STP2060 XS4P30MA230 Cable/ 15mm Sensing Distance/ 30mm Dia $$

STP2090 XS612B1NAM12 M12 Connector/ 4mm Sensing Distance/ 12mm Dia $$

STP2120 XS630B1NAM12 30mm Thread, 15mm Sensor with Connector $$

STP2100 XS618B1NAM12 18mm, M12 Connector, 8mm Sensing DIstance $$

STP2130 XS3P30MA230K 30mm Thread, 10mm Sensor, Quick Disconnect $$

STP2140 XS8D1A1PAM12 Proximity Switch $$

• Speed regulation by flux vector control• Speed range from 1 to 50• 2 Tn to 3 Hz without adjustment• Auto-tuning• Protection of motor and of drive• Operation up to 50°C without derating• Brake sequence• Regulator and preset PI• +/- speed, 16 preset speeds• Limit switch management• Traverse control (textile machines ).• Compact, side by side mounting

Variable Speed Driveby Telemecanique

208-240 VAC 2 HP

$$

STP530B1NAM12

STPATV312H075 208-240 VAC 1 HP

$$

D & S® Replacement PartsIdler Wheel Idler Bar Assembly Double Pulley Belt

Tightener

Single Pulley Belt Tightener

Double Pulley Spinner

Single Pulley Spinner

90° Swivel Swivel 3/8” MxF T Bar

Idler Arm Spring Holder

D & S# 5WHL200-2D & S# 5PUL604

D & S# 5GAN618

D & S# 5BER200

D & S# 5BER100

D & S# 5IDL615D & S# 5IDL310

DS8130 DS8100

DS8105

DS8115

DS8110

DS8125

DS8120

$$ $$

$$

$$

$$

$$

$$

SWM43262 SWM37163

SWMTB87837

$$ $$$$

STP2120

STPATV312HU15


Photoelectric Sensorsby Banner

Cord Setsby Banner

BPS1040

BPS1000

BPS1035

Part # Description Connection Type Banner # PriceBPS1000 Banner Emitter Wire Connection S186E $$BPS1005 Banner Proximity Switch Wire Connection S18SP6D $$BPS1015 Banner Receiver Wire Connection S18SP6R $$BPS1020 Banner Receiver Quick Disconnect SM30PRLQD $$BPS1025 Banner Receiver Wire Connection SM30PRL W/30 $$BPS1040 Banner Emitter Quick Disconnect SMA30PELQD $$BPS1030 Banner Emitter Wire Connection SMA30PEL W/30 $$BPS1035 Banner Receiver Wire Connection SM2A30PRL $$BPS1045 Banner Receiver Wire Connection SM2A30PRLW 30' $$BPS1085 Banner Receiver Quick Disconnect QS30ARXQP-74010 $$BPS1090 Banner Emitter Quick Disconnect QS30EXQP-74009 $$BPS1110 Banner Receiver Wire Connection SM30PRL $$BPS1115 Banner Emitter Wire Connection SMA30PEL $$BPS1120 Banner Receiver Wire Connection QS30RRX $$BPS1135 Banner Emitter Quick Disconnect QS30EQ $$BPS1140 Banner Receiver Quick Disconnect QS30RQ $$BPS1160 Banner Emitter Quick Disconnect QS30EXQ $$BPS1165 Banner Receiver Quick Disconnect QS30ARXQ $$

Part # Description Connection Type Banner # PriceBPSC5000 Banner Cable - 2 Meter, Straight , 5 Pin Quick Disconnect MQDC1-506 $$BPSC5005 Banner Cable - 5 Meter, Straight , 5 Pin Quick Disconnect MQDC1-515 $$BPSC5010 Banner Cable - 9 Meter, Straight , 5 Pin Quick Disconnect MQDC1-530 $$BPSC5015 Banner Cable - 2 Meter, 90°, 5 Pin Euro-Style Quick Disconnect MQDC1-506RA $$BPSC5020 Banner Cable - 9 Meter, Straight , 4 Pin Mini-style Quick Disconnect MBCC-430 $$BPSC5025 Banner Cable - 9 Meter, Straight , 3 Pin Mini-style Quick Disconnect MBCC-330 $$BPSC5030 Banner Cable - 4 Meter, Straight , 4 Pin Mini-style Quick Disconnect MBCC-412 $$BPSC5035 Banner Cable - 4 Meter, Straight , 3 Pin Mini-style Quick Disconnect SMICC-321 $$BPSC5040 Banner Cable - 2 Meter, Straight , 3 Pin Mini-style Quick Disconnect SM30CC-306 $$BPSC5050 Banner Cable - 5 Meter, 90°, 5 Pin Euro-Style Quick Disconnect MQDC1-515RA $$BPSC5055 Banner Cable - 9 Meter, 90°, 5 Pin Euro-Style Quick Disconnect MQDC1-530RA $$BPSC6000 Banner Cable - 6.5’ Long, 5 Pin - Stainless Steel Coupling Nut Euro-Style Quick Disconnect MQDC20SS-506 $$BPSC6005 Banner Cable - 6.5’Long, 5 Pin, 90° - Stainless Steel Coupling Nut Euro-Style Quick Disconnect MQDC20SS-506RA $$BPSC6010 Banner Cable - 15’ Long, 5 Pin - Stainless Steel Coupling Nut Euro-Style Quick Disconnect MQDC20SS-515 $$BPSC6015 Banner Cable - 16.4’Long, 5 Pin, 90° - Stainless Steel Coupling Nut Euro-Style Quick Disconnect MQDC20SS-515RA $$BPSC6020 Banner Cable - 20’ Long, 5 Pin - Stainless Steel Coupling Nut Euro-Style Quick Disconnect MQDC20SS-530 $$BPSC6025 Banner Cable - 30’Long, 5 Pin, 90° - Stainless Steel Coupling Nut Euro-Style Quick Disconnect MQDC20SS-533RA $$BPSC6200 Banner Cable - 6.5’ Long, 4 Pin - SS Abrasion Resistant Euro-Style Quick Disconnect MQDS-WDSS-0406 $$BPSC6205 Banner Cable - 15’ Long, 4 Pin - SS Abrasion Resistant Euro-Style Quick Disconnect MQDS-WDSS-0415 $$BPSC6210 Banner Cable - 30’ Long, 4 Pin - SS Abrasion Resistant Euro-Style Quick Disconnect MQDS-WDSS-0430 $$BPSC6215 Banner Cable - 6.5’ Long, 5 Pin - SS Abrasion Resistant Euro-Style Quick Disconnect MQDS-WDSS-0506 $$BPSC6220 Banner Cable - 15’ Long, 5 Pin - SS Abrasion Resistant Euro-Style Quick Disconnect MQDS-WDSS-0515 $$BPSC6225 Banner Cable - 30’ Long, 5 Pin - SS Abrasion Resistant Euro-Style Quick Disconnect MQDS-WDSS-0530 $$

BPS1090

BPS1025

BPSC5030


Proximity Switchesby Turck

Cord Setsby Turck

TPS1015

Part # Description Connection Type Turck # PriceTPS1000 Turck Inductive Sensor Quick Disconnect NI15U-EM18WD-AN6X-H1141 $$TPS1001 Turck Proximity Switch Quick Disconnect NI12U-EM18WD-AN6X-H1141/S1163 $$TPS1010 Turck Proximity Switch Quick Disconnect NI75U-CP80-AN6X2-H1141 $$TPS1015 Turck Proximity Switch Wire Leads BI12-EM30EWD-AN6X6 $$TPS1020 Turck Inductive Sensor Wire Leads NI75U-CP80-AN6X2 $$TPS1025 Turck Inductive Sensor Quick Disconnect BI10-P30-AN6X-B2141 $$TPS1030 Turck Inductive Sensor Quick Disconnect BI5-S18-AD4X-H1141 $$TPS1035 Turck Inductive Sensor Quick Disconnect NI12U-M18-AN6X-H1141 $$TPS1040 Turck Inductive Sensor Quick Disconnect BI10U-EM30-AN6X-H1141 $$TPS1045 Turck Inductive Sensor Quick Disconnect NI20U-EM30-AP6X-H1141 $$TPS1055 Turck Pancake Switch Quick Disconnect NI75U-CP80-AP6X2-H1141 $$TPS1060 Turck Inductive Sensor Quick Disconnect NI20U-EM30-AN6X-H1141 $$TPS1065 Turck Inductive Sensor Quick Disconnect NI5-G12-AN6X-H1141 $$TPS1090 Turck Proximity Switch Wire Leads BI10-S30AZ3X7M $$TPS1140 Turck Proximity Switch Pigtail Quick Disconnect BI15-EM30-AN45XLD-0.2MRS4T $$TPS1170 Turck Proximity Switch Pigtail Quick Disconnect BI15U-EM30WD-AN6X-0.2M-RSV4T $$TPS1185 Turck Inductive Sensor Wire Leads BI10-S30-AN6X $$TPS1190 Turck Inductive Sensor Quick Disconnect BI10-S30-AD4X-H1141 $$TPS1195 Turck Inductive Sensor Quick Disconnect BI10-S30-AN6X-H1141 $$

Part # Description Connection Type Turck # PriceTPSC5000 Turck Cordset - 90°, 5 Wire M12 Eurofast WK4.5T-10 $$TPSC5005 Turck Cordset - 90°, 4X18AWG Wire Leads WK40-4M $$TPSC5010 Turck Cordset - 90°, 4 Wire M12 Eurofast WK4.4T-4 $$TPSC5015 Turck Cordset - Straight, 4 Wire M12 Eurofast RKC4.4T-4 $$TPSC5020 Turck Cordset - Straight, 3 Wire M12 Eurofast RK4T-8 $$TPSC5025 Turck Cordset - Straight, 3 Wire M12 Eurofast RK4T-6 $$TPSC5030 Turck Cordset - Straight, 6 Wire Wire Leads RKCV6T6-S618/NO $$TPSC5035 Turck Cordset - Straight, 3 Wire M12 Eurofast RK4T-2 $$TPSC5040 Turck Cordset - 90°, 3 Wire M12 Eurofast WK4T-6 $$TPSC5045 Turck Cordset - Straight, 3 Wire M12 Eurofast RKC4T-6 $$TPSC5050 Turck Cordset - 90°, 4 Wire Wire Leads WKV4.4T-6/S618 $$TPSC5060 Turck Cordset - Straight, 4 Wire Wire Leads RKK4.4T-12 $$TPSC5065 Turck Cordset - 90°, 4 Wire M12 Eurofast WK4.4T-10 $$TPSC5070 Turck Cordset - 90°, 4 Wire M12 Eurofast WK4.4T-12 $$TPSC5075 Turck Cordset - 90°, 3 Wire M12 Eurofast WK4T-4 $$TPSC5080 Turck Cordset - 90°, 3 Wire M12 Eurofast WK4T-2 $$TPSC5055 Turck Cordset - 90°, 4 Wire Wire Leads WKV4.4T-15 $$

TPSC5050

TPS1055 TPS1020

TPS1001

TPSC5010


The Telco PA-03 car wash set is designed to provide years of trouble free operation in the toughest environments. The compact PA-03 set is designed to fit into any automated car wash providing the best in reliability and trouble free use. The Telco PA-03 set uses completely sealed sensors which are truly water proof and very easy to line up. The Telco sensors also have an industry leading 100,000 lux light immunity rating ensuring that the set will continue to work even in direct afternoon sunlight. Soap buildup, fog, steam and high water spray are not a problem with Telco sensors. All Telco products have a 3 year warranty.

• Power ON indicator: Green LED• Output indicator: Yellow LED• Operation frequency: 10 Hz• Response time ON/OFF: 40 ms/40 ms• Sensing range: 230 feet

TelcoCar Wash SetsIncludes: Receiver, Transmitter, Amplifier & 11 Pin Socket

K-R Part # Telco Part # Description Price

TPA0324VACSET PA03-24VAC-SETCar Wash Set 24VAC With LED, Relay/NPN Output

Set Consists of: 1-PA03-24VAC, 1-LR05LCW, 1-LT05LCW, 1-TR11-05$$

TPA0324VDCSET PA03-24VDC-SETCar Wash Set 24VDC With LED, Relay/NPN Output

Set Consists of: 1-PA03-24VDC, 1-LR05LCW, 1-LT05LCW, 1-TR11-05$$

TPA03115VACSET PA03-115VAC-SETCar Wash Set 115VAC With LED, Relay/NPN Output

Set Consists of: 1-PA03-115VAC, 1-LR05LCW, 1-LT05LCW, 1-TR11-05$$

TLT05CWTelcoReplacement Parts

KR Part # Telco Part # Description Price

TL500CNGK-D SMT5000CNGK-D Car Wash Transmitter, M18, DC, With Control Wire, 4P M12 Quick Disconnect3-80ft Range. DOES NOT INCLUDE CABLE. $$

TLT100 LT100HLTB58J-CC Car Wash Transmitter With LED, M12, Hi-Power, 4P M12 Quick DisconnectDOES NOT INCLUDE CABLE. $$

TLT05CW LT05CW Car Wash Transmitter, M12, Hi-Power, 50 FT CABLE $$

TLT115 LT05LCW Car Wash Transmitter With LED, M12, Hi-Power, 50 FT Cable $$

TransmittersTL5000CNGK-D



TP80459A 80459A 4 Pole, M12 Connector, Straight, 5 Meter, PVC Cable $$

TP80459A-10M 80459A-10M 4 Pole, M12 Connector, Straight, 10 Meter, PVC Cable $$

TP80459A-15M 80459A-15M 4 Pole, M12 Connector, Straight, 15 Meter, PVC Cable $$

TP80499A 80499A 4 Pole, M12 Connector, 90º, 5 Meter, PVC Cable $$

TP80499A-15M 80499A-15M 4 Pole, M12 Connector,, 90º, 15 Meter, PVC Cable $$

CablesTP80459A

TP80499A


HSEA285011 MPA21B503 Car Wash Multiplexed Amplifier, 24VDC, 2 Individual Relays $$

TLR1105 TR11-05 Car Wash 11 Pin Socket $$TIPS1879-M12 IPS18N8PO79.A12 Unshielded Proximity Switch CALL

Misc

TLR1105

HSEA285011


TSMR54251 SMR5425/1NGK-DCar wash receiver, M18, NPN, NO/NC,

4P M12 quick disconnect. 3-80ft range. DOES NOT INCLUDE CABLE.

$$

TLR110 LR110LTB58J-CCQuick disconnect receiver (sensor only).

High powered, thru-beam. M 12 housing. DOES NOT INCLUDE CABLE.

$$

TLR05CW LR05CW Car wash receiver, M12, 50ft cable $$TLR115 LR05LCW Car wash receiver with LED, M12, 50ft cable $$TLR05CW

TSMR54251Receivers

KR Part # Telco Part # Description PriceTPA03115VAC PA03-115VAC Car Wash Amplifier, 115VAC, Relay/NPN Output $$TPPA0324VDC PA03-24VDC Car Wash Amplifier, 24VDC, Relay/NPN Output $$TPA0324VAC PA03-24VAC Car Wash Amplifier, 24VAC, Relay/NPN Output $$TPA14A903 TPA14A903 Test Amplifier 24VDC $$TPA14A902 TPA14A902 Test Amplifier 24VAC $$TPA14A901 TPA14A901 Test Amplifier 115VAC $$

Amplifiers

TPPA0324VDC


KR Part # Gavazzi Part # Description Price

CGP1000 S142ARNN024 Basic Amplifier. 24V ac. NPN & alarm. $$CGP1005 S142ARNN924 Basic amplifier 24V ac/dc. NPN & alarm. $$CGP1020 ZPD11 11 pin socket for amplifers $$

KR Part # Gavazzi Part # Description PriceCGP2000 MOFR-M12-8 Receiver - M12 Connection 8° Optical Angle $$CGP2005 MOFR-M14-8 Receiver - M14 Connection 8° Optical Angle $$CGP2010 MOFR-M14-8-30.5M Receiver - M12 Connection 8°Optical Angle w/ 100 ft Cable $$

KR Part # Gavazzi Part # Description PriceCGP3000 MOFT-M12-8 Transmitter - M12 Connection 8° Optical Angle $$CGP3005 MOFT-M14-8 Transmitter - M14 Connection 8° Optical Angle $$

KR Part # Gavazzi Part # Description PriceCGP4000 IA30DSN15NO Inductive proximity sensor. M18 connection, non flush mount 8mm range $$CGP4015 IA18DSN08NO Inductive Proximity Sensor. M18 connection. 8mm range. CALL

Amplifiers

Receivers

Transmitters

Misc.

CGP1000

CGP1010

CGP2010

CGP1020

CGP3010

CGP4000

IFM Effector

Part # Thread Size PriceIFM5541 12 mm 2 mm $$IFM5496 18 mm 5 mm $$IFM5453 30 mm 10 mm $$IFM5796 18 mm 8 mm $$IFM0270 30 mm 10 mm $$IFM5292 30 mm 15 mm $$ IFM0270

Quick disconnect cordsets and field wirable connectors offer plug-and-play functionality for electrical wiring. Product lines include:

• Female cordsets • Male cordsets • Patch cables • Female field wirables • Y-splitters • Male field wirables • COMBICON connector • Wiring blocks


Sensor Cable for Proximity Switch

Repair Kit

Part # Size PriceSTPCV1G2M 6’ Straight end $$STPCV1G5M 12’ Straight end $$

STPCV1WYE2M 6’ Right angle $$STPCV1WYE5M 12’ Right angle $$

No Corrosion - Ideal For Car Wash Applications

Part # ARO Model Description Specs. Price

AC1020 ANAQK-ABXAB-080 ARO MS4 Mount Cylinder 1-1/2” Bore X 8” Stroke $$

AC1030 ANAQK-ABXAD-100 ARO CLEVIS Mount Cylinder 1-1/2” Bore X 10” Stroke $$

AC1040 ANAQK-ABXD-80 ARO CLEVIS Mount Cylinder 1-1/2” Bore X 8” Stroke $$

AC1050 ANAQK-ABXAD-120 ARO CLEVIS Mount Cylinder 1-1/2” Bore X 12” Stroke $$

AC1060 ANAQK-CBXAC-044 ARO CLEVIS Mount Cylinder 1-1/2” Bore X 4-1/2” Stroke $$

NFPA Air Cylinders

Lexair Valve

• Tie bolt construction eliminates rod binding and tie rod torque problems• Rugged thick walled tubes resist denting.• NFPA repairable and interchangeable.• Factory lubricated grease that will not wash out.• Operates on air pressure up to 250 p.s.i.• Output forces up to 19,635 lbs. (10" bore at 250 p.s.i.).• Std. operating temp: 0 degrees to 185 degress (F), -18 degress to 82 degrees (C).• Viton seals for high heat applications (up to 300 degress F, 149 degrees C)

• Lexair air operated shut off valve• For use in high pressure lines and change over between spray arch and underbody on PDQ LaserWash 4000 automatic car wash• 1” FPT port connection• Pressure rating 1000 psi• Direct pilot operated normally open valve• Valves feature a large resilient poppet that provides bubble-tight closure, even under low pressure conditions• Internal components made from bronze, brass and stainless steel• Pilot cap is easily removed for quick access to the valve’s one-piece poppet assembly• O-ring on poppet and U-cup pilot piston seal prevent controlled and pilot media from mixing, permitting use of different media for pilot/control• Incorporate a single, direct operated poppet design

DF06LC

Danfoss Valves

$$For Type EVSI6

DF06LCK $$REPAIR KIT -

CALL FOR OTHER VALVES

3/8 Solenoid Valve (Less Coil)

1/2 Solenoid Valve (Less Coil)DF08LC

LX4136202

LX4136002

$$

$$

$$

Direct servo-operated 2/2-way solenoid valve.


Automatic Car Wash Stop/Go Light

• Stainless Steel• Heavy Duty Wall Mounting Bracket• Traffic Duty 8000 Hr. Bulbs included• Wired for 110 V service $$AMSGLPED

Pedestal

Replacement Bulb For Stop/Go Light• Replacement bulb for AMSGL • Pulse-Start Metal Hallide • 69W CLear Traffic Signal Bulb for Stop/Go Lights

LIB069 $$

TSS120L2P

Pedestal Mount

Please Specify LEDcolor for each circle

TSS120L2S

Swivel Mount

$$

$$

2-Light LEDTrafficFixture

Specifications:

•A modern sleek looking traffic fixture with unmistakable large and bright LED symbols.•Dimensions:Each circle is 7.75” in diameter. Two light is- 11” W x 23” H x 4.5” D with a 3.75” D sun shield.•Construction: External body is made from high impact plastic and aluminum backing.•Light Source: Ultra bright easy to replace LED letter modules.•Voltage/Amperage: 100~240VAC / 1.2 AMP MAX per message.

AMSGL $$

FLASHING SLIM LED“ARROW” & “X” TRAFFIC FIXTURE

• A modern sleek looking traffic fixture with unmistakable large and bright LED symbols.• 13” W x 13” H x 4.5” D. • Red LED X measures 10” x 10”. • Green LED arrow is 10” x 8”• Black baked enamel aluminum and stainless steel hardware, with a high impact plastic face.• Voltage/Amp 100-240VAC / 1.2 AMP per symbol

TSS120XS Swivel Mount Traffic Fixture $$TSS120XP Pedestal Mount Traffic Fixture $$

Red Amber Green


AMLSB

Shear Pin Bolt4 - 1/2”

$$

Festoons

Bridge Rollers

Part # Description Price

AMLFCTR1 Heavy Duty Galvinized $$AMLFCTR1SS Stainless Steel $$

AM33293 Plastic $$

Belanger™ VectorCarriage ShuttleReplacement Roller

7X4BLKWHLB

4 Per Machine

$$

Part # Description Price

AMLBF Breakaway Arm $$

Misc. Parts

5” Trolley3” Saddle

Part # Color Price

AMLBRW White $$AMLBRBK Black $$

AMLTUBEAMLTIRE $$ AMLRIM-S

Tire410/3.50-4 - 2 ply tube type

Tire Rim4 x 1-5/16 - Stainless Steel

Tire Innertube410-4

$$ $$

Sold Separately - Need to order 2 for complete set!


D-Tek Vehicle Loop Detector

EMDTEK

$$

Loop detector relay(Must Specify Voltage

when ordering)

Benefits include:● Easy installation● Works with small operator housings● Operates reliably with marginal loops● Metal housing provides maximum durability and RF blocking● Array of features and controls supports variety of applications.● Surge protection

Features:● Loop diagnostics ● Loop isolation transformer● Loop conditioner● Aluminum RF shield housing● Loop frequency counter● 10 gold plated sensitivity controls● 8 gold plated function controls● 6 gold plated controls for frequency, reset & frequency counter● 2 high intensity LED indicators● 2 relays pulse or presence

$$

EMHAR11

11 Pin Harness

EMSP24

EMSP24-100

$$

$$

SP-24 Surface Mounted Loop Pad

SP-24 Surface Mounted Loop Pad(With 100’ Lead)

Features: ● Size: 23.75” x 23.75” x 1” ● Material: black polypropylene ● Lead-In: 50 feet shielded twisted pair ● SP-24 Lead-In Guard: is 24" x 3" x .5" and also made out of black polypropylene

SP-24 Surface Mounted Loop Pad The SP-24 Surface Mounted Loop Pad is designed for use with EMX D-TEK loop detectors.

Lead-In Guard (Included With Loop Pad)

SP-24 Surface Mounted Loop Pad

EMDTEK-MVP

$$

MVP Loop Detector RelayFor ANY voltage

12 - 220 AC or DC

The D-TEK vehicle loop detector was designed for easy installation and opera-tion. It provides maximum surge protection on all inputs and outputs of the detector. Vehicle Loop Detector D-Tek (box only)

EMBASE $$Base for Relay

2’ x 6’ pre-formed loopOther Sizes Available

EMPR26 $$

EMDTEK-ULTMVP

$$

Ultraloop Multi-Voltage Vehicle Detector9VDC - 240VAC

EMUSVD-4X

$$

Loop-less Vehicle Detector

Aim to Detect


Vickers Vane Pumps

Part # Description GPM Price

VPV101P1P1A20 0.2 Pump 1.5 $$VPV101P2P1A20 0.4 Pump 3 $$VPV101P3P1A20 0.6 Pump 4.5 $$VPV101P4P1A20 0.8 Pump 6 $$VPV101P5P1A20 1.0 Pump 7.5 $$VPV101P6P1A20 1.19 Pump 9 $$VPV101P7P1A20 1.39 Pump $$

VPP923548 Seal Kit Pump 5 & 7 HP $$VPP263585 Shaft Seal $$

V10 Series Pumps • 3/4” Straight Keyed Shaft • 1” NPT Inlet• 1/2” NPT Outlet


VPV201P6P1A11 1.9 Pump 9 $$VPV201P7P1A11 1.39 Pump 10.5 $$VPV201P8P1A11 1.62 Pump 12.0 $$VPV201P9P1A11 1.81 Pump 13.5 $$

VPV201P11P1A11 2.22 Pump 16.5 $$VPV201P12P1A11 2.38 Pump 18.0 $$VPV201P13P1A11 2.59 Pump 19.5 $$

VPP922733 Seal Kit, Buna-N $$VPP229235 Seal Shaft 201 P $$

V20 Series Pumps

• 3/4” Straight Keyed Shaft • 1 1/4” NPT Inlet• 3/4” NPT Outlet


VP25V12A1A22R 2.47 Pump 18 $$VP25V14A1A22R 2.78 Pump 21 $$VP25V17A1A22R 3.39 Pump 25.5 $$VPP922850 Seal Kit, 25 V $$VPP394976 Shaft Seal Kit, 25 V $$

V25 Series Pumps

• 7/8” Straight Keyed Shaft • 1 1/2” NPT Inlet• 1” NPT Outlet


VP35V25A1A22R 4.94 Pump 37.5 $$6.87VP35V30A1A22R 5.91 Pump 45 $$6.87VP35V35A1A22R 6.83 Pump 52.5 $$6.87VP35V38A1A22R 7.37 Pump 57 $$6.87VPP922851 Seal Kit, 35 V $$VPP394973 Shaft Seal Kit, 35 V $$

V35 Series Pumps

• 1 1/4” Straight Keyed Shaft • 2” NPT Inlet• 1 1/4” NPT Outlet


Char-Lynn® MotorsH Series

Part# Description Displacement RPM/3 GPM RPM/6 GPM Ring Size PriceCL101-1001-009 Motor, 1/4” Ring 2.8 235 471 1/4” $$CL101-1002-009 Motor, 3/8” Ring 4.5 150 296 3/8” $$CL101-1003-009 Motor, 1/2” Ring 5.9 115 230 1/2” $$CL101-1004-009 Motor, 7/8” Ring 9.7 70 140 7/8” $$CL101-1005-009 Motor, 1” Ring 11.3 60 120 1” $$CL101-1006-009 Motor, 1 1/4” Ring 14.1 48 95 1-1/4” $$CL101-1007-009 Motor, 1 1/2” Ring 17.9 38 75 1/2” $$CL101-1008-009 Motor, 2” Ring 22.6 30 60 2” $$

CLP22000-2 4 Bolt Mount Flange 009-010 $$CLP7464 4 Bolt Mount Flange 007-008 $$


CLP60540 Seal Kit 009 $$CLP60023 Seal Kit 007 $$CLP5422 Socket for Hydraulic 12 Pt $$

CLP14193 Woodruff Key, 1” $$

Maximum Case Pressure: 1500 PSIFluid Viscosity: Minimum viscosity at operating temperature should be the highest of the following: 10 SUS or (20 x PSI)/RPM=SUSRecommended Fluids: Premium quality, anti-wear type hydraulic fluidRecommended Filtration: Per ISO Cleanliness Code Level 18/13Maximum Recommended Operating Temperature: 180° FRecommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications

Char-Lynn® Wheel MotorsCenter Flange 10,000 Series

Char-Lynn® Front Flange

10,000 SeriesPart# Description Price

CL120-1008-003 Motor, 10,000 Series $$7.46CLP6405 Motor Seal Kit $$CLP6406 Shaft Seal Kit $$

CL119-1031-003 $$0.23

• 2 1/4” Shaft• 54.7 cubic inch displacement

Char-Lynn® Motor2000 Series

Part# Description Price

CL104-1043-006 Motor, 18.7 cu”/ Rev $$CL104-1025-006 Motor, 9.6 cu”/ Rev $$

CLP61258 Seal Kit 104 & 106 $$

1 1/4” Keyed Shaft

Char-Lynn® 2000 Series

Part# Description Price

CL106-1012-006 Motor, 11.9 cu”/ Rev $$CL106-1013-006 Motor, 14.9 cu”/ Rev $$CL106-1014-006 Motor, 18.7 cu”/ Rev $$CL106-1015-006 Motor, 24 cu”/Rev $$

CLP61258 Seal Kit 104 & 106 $$


Char-Lynn® Motors S Plus

Part# Description Displacement RPM/3 GPM

RPM/6 GPM

Ring Size Price

CL103-1002-012 Motor, 3/8” Ring 4.5 146 293 3/8” $$CL103-1003-012 Motor, 1/2” Ring 5.9 112 225 1/2” $$CL103-1004-012 Motor, 7/8” Ring 9.7 68 136 7/8” $$CL103-1005-012 Motor, 1” Ring 11.3 58 117 1” $$CL103-1006-012 Motor, 1 1/4” Ring 14.1 47 95 1-1/4” $$CL103-1007-012 Motor, 1 1/2” Ring 17.9 37 75 1-5/8” $$

CL103-1008-012 Motor, 2” Ring 22.6 30 60 1-1/2” $$



CLP60539 Seal Kit 010 $$CLP60533 Seal Kit 008 $$

Maximum Case Pressure: 1500 PSIFluid Viscosity: 70 SUS at operating temperatureRecommended Fluids: Premium quality, anti-wear type hydraulic fluidRecommended Filtration: Per ISO Cleanliness Code Level 18/13

Maximum Recommended Operating Temperature: 180° FRecommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications

Parker Ross MotorsTB Series

TC Series

• Provides low-cost hydraulic power for medium to light duty applications• Fully interchangeable with industry standards for porting, standard shafts & mountings• Zero-leak commutation valve provides greater, more consistent volumetric efficiency• Full-flow lubrication maximizes cooling & extends motor life up to 50%• Patented 60-40 spline member arrangement transmits more torque with less weight• Full interchangeability with other motors - designed according to industry standards• Unique high-pressure shaft seal - eliminates need for case drains• Up to 13 HP output

CALL FOR PRICE

Part # Parker Number Displacemnt RPM Shaft Ports Mount

PM1115 TB0195FP100AAAC 11.9 in3/rev 287 1” 1/2” NPTF 4 BoltPM1150 TB0050FP100AAAC 3.0 in3/rev 678 1” 1/2” NPTF 4 BoltPM1155 TB0065FP100AAAC 4.0 in3/rev 511 1” 1/2” NPTF 4 BoltPM1175 TB0100FP100AAAC 6.0 in3/rev 454 1” 1/2” NPTF 4 BoltPM1185 TB0165FP100AAAC 10.0 in3/rev 343 1” 1/2” NPTF 4 BoltPM1195 TB0230FP100AAAC 13.9 in3/rev 246 1” 1/2” NPTF 4 BoltPM1225 TC0050FS100AAAC 3.0 in3/rev 688 1” 7/8” SAE 4 BoltPM1230 TE0230AS010AAAC 13.9 in3/rev 328 1” 7/8” SAE 2 Bolt


DiabloGreat product for retrofitting an existing dryer system in an existing tunnel. Proto-Vest’s Diablo line is the ideal primary side dryingsolution for short tunnels as well as a perfect finishing dryer for high volume locations. It has adapters available for order that canfit any pre-existing motor blower from any manufacturer. Available in three dual color combinations as listed below. Additional custom colors available upon request for additional cost. Subject to availability.

• Safe touch-free drying• Compact design only requires a 12 foot wide tunnel for installation - with optional extensions• Air tube adjusts 12 degrees in either direction for precise calibration• Patented Proto-Vest designed bag that distributes air evenly• Zero maintenance

SPECIFICATIONSOverall Height - 78.75 in.Overall Width - 28 in.Bag Height - 70 in.Bag Width (Top) - 18 in.Bag Width (Below) - 12.5 in.

Color Choices:Actual color may vary from pictures shown. Custom colors also available upon request.

Red TipsBlack Bag

Green TipsBlack Bag

Blue TipsBlack Bag

Drying performance is affected if any of the followingare present: 1. If the car is not clean; 2. Use of RO water without drying agent; 3. If cleaning agents are not properly balanced; 4. Insufficient rinsing (soap on vehicle); 5. Inadequate balance between rinse water & drying agent; 6. Excessive drive through speed.

CALL FOR PRICE


Inbay RM

Optional Products:

Overview:• Touch-Less Drying• Adjustable Bag Angles• Easy To Assemble• Compact Design - Fits Narrow Bays• Dent / Corrosion Proof• Low Maintenance

Color Choices:

Black

Green

Red

Blue

Actual color may vary from pictures shown. Custom colors also available upon request

The InBay RM dryer is a cost effective solution constructed from high density polyethylene alloy, making it dent proof, corrosion proof and easy to assemble. Specifically designed for InBay applica-tions, this system utilizes two (2) 30hp blowers and three (3) air delivery bags designed to direct air around the vehicle as it passes through the equipment. Each bag is fully adjustable in 5 degree increments from 0 to 15 degrees. All bags are produced from durable Proto-Duck™ material, which resists corrosion and tearing.

Motors:• (2) 30hp, 3600 RPM• 208-230 / 460 volts• 1.15 service factor• Frame: 286TS• 3 Phase• Totally enclosed, fan cooled (TEFC)

Features & Benefits:Patented Touch-less Design: Pressurized air flows through three patented bags that direct air to the vehicle’s horizontal and vertical surfaces to dry the hood, roof, deck, windows, and top side panels of a vehicle without touching.Low Maintenance: High density polyethylene alloy makes the InBay RM dent proof, corrosion proof and easy to assemble. Other than the blower/motor assemblies, there are no moving parts to wear out or break down. (Please note that Proto-Vest recommends routine maintenance in order to maximize product life.)Compact /Modular Engineering: Designed to fit into limited space as a stand alone dryer.

InBay RM Dimensions:• Overall Length: 40 3/4 in.• Overall Width: 175 5/8 in.• Overall Height: 122 1/8 in.• Bag Height: 84 in. (approximate)• Side Bag Spacing: 100 in. apart (approximate)

Drying performance is affected if any of the followingare present: 1. If the car is not clean; 2. Use of RO water without drying agent; 3. If cleaning agents are not properly balanced; 4. Insufficient rinsing (soap on vehicle); 5. Inadequate balance between rinse water & drying agent; 6. Excessive drive through speed.

Please Note when Purchasing:• Wiring and controls to be provided by the purchaser. • Additional motor specifications available upon request.• Additional voltages available on special order.

Silencer Package - Reduce decibel levels generated by the dryer to ensure

a pleasant wash environment.

Starter Package - User friendly motor control for

single or dual motors.

CALL FOR PRICE


Windshear®

The Windshear is designed as a stand alone system that provides proficient drying results while reducing drive through time. This patented system utilizes a 30hp rotary molded blower, plenum and three (3) Proto-Duck™ air delivery bags designed to direct air around the vehicle as it passes under the equipment arch. Proto-Vest’s blower/motor assemblies are engineered for both maxi-mum efficiency and cost effectiveness, allowing the system to operate with only one 30hp blower. With the improved performance of the Magnum blower assembly, the Windshear’s drying quality far surpasses any comparable horsepower dryer in its class. The Windshear’s plenum is made from premium 5052-H32 aluminum and the bags are produced from durable Proto-Duck™ material to resist corrosion/tearing and extend equipment life while reducing maintenance.

Overview:• Touch-Less Drying• High Efficiency - Only 30Hp• Easy To Assemble• Perfect for Conveyor Operations• Low Maintenance

Motors:• 30hp, 3600 RPM• 208-230 / 460 volts• 1.15 service factor• Frame: 286TS• 3 Phase• Totally enclosed, fan cooled (TEFC)

Windshear Dimensions:• Overall Length: 44 3/8 in.• Overall Width: 169 5/8 in.• Overall Height: 119 1/2 in.• Bag Height: 84 in.• Horizontal Approx.: 90 in.

Actual color may vary from pictures shown. Custom colors also available upon request

Color Choices:

Black

Green

Red

Blue

Features & Benefits:Patented Touch-less Design: Pressurized air flows through three patented bags that direct air to the vehicle’s horizontal and vertical surfaces to dry the hood, roof, deck, windows, and top side panels of a vehicle without touching.Low Maintenance: High density polyethylene alloy makes the InBay RM dent proof, corrosion proof and easy to assemble. Other than the blower/motor assemblies, there are no moving parts to wear out or break down. (Please note that Proto-Vest recom-mends routine maintenance in order to maximize product life.)Compact /Modular Engineering: Designed to fit into limited space as a stand alone dryer.

Optional Products:

Silencer PackageReduce decibel levels generated by the dryer to ensure a pleasant

wash environment.

Starter PackageUser friendly motor control for single or dual motors.

AirGateReduce horsepower usage and prolong

the life of yourdryer motor.

Please Note when Purchasing:• Wiring and controls to be provided by the purchaser. • Additional motor specifications available upon request.• Additional voltages available on special order. CALL FOR PRICE


Before Ordering, Please Note the Following:

What are the measurements of your brush equipment?Who manufactures your equipment?What is the overall length and diameter?Is the shaft bolted or welded?If welded, what is the shaft length and diameter?

Part # Shaft Color Price

UB512BK Bolt Adapter Black $$UB514BK Welded Black $$3.30

Poodle Tire Brushes

Standard Tire Brushes (Nylon/Poly Mix)

Standard Tire Brushes (Poly)

Standard Tire Brushes (Nylon)

Universal Brush Tire Brushes


UB500BK Bolt Adapter Black $$UB500BL Bolt Adapter Blue $$UB500R Bolt Adapter Red $$

UB502BK Welded Black $$UB502BL Welded Blue $$UB502R Welded Red $$







Cloth Tire BrushesPart # Shaft Color Price



Tire Dressing BrushesPart # Shaft Color Price

UB520BK Bolt Adapter Black $$UB522BK Welded Black $$

Erie Wheel Wonder

Introducing the patent pending Erie Wheel Wonder™ featuringimproved, constant full contact with the wheel. The washing material can be filament, Erie’s Supreme Cloth or Erie’s Gentle Foam. The brand new patent pending design assures improved wheel cleanliness. The cleaning improvement will be noticeable by both you and your customers.

• 96” in length or longer recommended • 18” major diameter recommended• Dynamically balanced with solid, precise construction.• Available with 4 bolt mount or keyed shaft or custom.

$$5.00EB127100

96” x 8” Diameter

Red & Light Blue

Light Blue & Yellow

Black & Yellow

Black & Red

Black & White

Black Dark Blue Light Blue Green Red White Yellow

Dark Blue & Black

Please specify color when ordering.


ConveyorLength in Feet

X45810’ Section

Roller Spacing on Conveyor7’-4” Roller Spacing 3’-6” & 3’-4” Roller Spacing

Rollers Chain Section Rollers Chain Section

40 8 11 10 22 2145 9 12 11 24 2350 10 14 13 27 2655 11 15 14 30 2960 12 16 15 32 3165 13 18 17 35 3470 14 19 18 38 3775 15 20 19 41 4080 16 22 21 43 4285 17 23 22 46 4590 18 24 23 49 4895 19 26 25 51 50

100 20 27 26 54 53105 21 29 28 57 56110 22 30 29 60 59115 23 31 30 62 61120 24 33 32 65 64125 25 34 33 68 67130 26 35 34 70 69135 27 37 36 73 72140 28 38 37 76 75145 29 39 38 78 77150 30 41 40 81 80155 31 42 41 84 83160 32 43 42 87 86165 33 45 44 89 88170 34 46 45 92 91175 35 47 46 95 94180 36 49 48 97 96185 37 50 49 100 99

ROLLER &CHAIN CHART

tire shiner equipment package - car wash - kleen-rite … · tire shiner equipment package perfect...

Documents