tisi library accession list february-march...

TISI Library Accession List :February-March 2003

TISI Library Accession List

February-March 2003

ABRASIVES ISO ISO 15637-2 2002 Holding fixtures of cylindrical abrasive sleeves - P.2: Holding fixtures for stationary

machines / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16057 2002 Coated abrasives - Vulcanized fibre discs / By International Organization for

Standardization (ISO). Geneva: ISO, 2002.

ACCESS DSM MS 1184 2002 Code of practice on access for disabled persons to public buildings / By Department of

Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

ACCIDENTS - VOCABULARY ISO ISO 12353-1 2002 Road vehicles - Traffic accident analysis - P.1: Vocabulary / By International

Organization for Standardization (ISO). Geneva: ISO, 2002.

ACOUSTIC MEASUREMENT ISO ISO 11904-1 2002 Acoustics - Determination of sound immission from sound sources placed close to

the ear - P.1: Technique using a microphone in a real ear (MIRE technique) / By International Organizationfor Standardization (ISO). Geneva: ISO, 2002.

ISO 15186-3 2002 Acoustics - Measurement of sound insulation in buildings and of building elementsusing sound intensity - P.3: Laboratory measurements at low frequencies / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 9614-3 2002 Acoustics - Determination of sound power levels of noise sources using soundintensity - P.3: Precision method for measurement by scanning / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 15744 2002 Hand-held non-electric power tools - Noise measurement code - Engineering method(grade 2) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ACOUSTICS ASTM ASTM 04.06 2002 Thermal insulation; environmental acoustics / By American Society for Testing and

Materials (ASTM). West Conshohocken : ASTM, 2002.


ISO ISO 11904-1 2002 Acoustics - Determination of sound immission from sound sources placed close to

the ear - P.1: Technique using a microphone in a real ear (MIRE technique) / By International Organizationfor Standardization (ISO). Geneva: ISO, 2002.

ISO 15186-3 2002 Acoustics - Measurement of sound insulation in buildings and of building elementsusing sound intensity - P.3: Laboratory measurements at low frequencies / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ACOUSTOELECTRIC EFFECTS IEC IEC 61252 2002 Electroacoustics - Specifications for personal sound exposure meters / By

International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ACRYLONITRILE BUTADIENE STYRENE ISO ISO 2580-1 2002 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -

P.1: Designation system and basis for specifications / By International Organization for Standardization(ISO). 5th ed. - - Geneva: ISO; 2002.

ACTIVATED PRODUCT ASTM ASTM 15.01 2002 Refractories; activated carbon, advanced ceramics / By American Society for

Testing and Materials (ASTM). West Conshohocken : ASTM, 2002.

ADHESION TESTS ISO ISO 13779-4 2002 Implants for surgery - Hydroxyapatite - P.4: Determination of coating adhesion

strength / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ADHESIVE TAPE JSA JIS Z0237 2000 Testing methods of pressure-sensitive adhesive tapes and sheets / By Japanese

Standards Association (JSA). Tokyo: JSA, 2002. SABS SABS 122 2001 Pressure-sensitive adhesive tapes for electrical purposes (Metric units) / By South

African Bureau of Standards (SABS). Pretoria; SABS, 2001.

ADHESIVES ASTM ASTM 15.06 2002 Adhesives / By American Society for Testing and Materials (ASTM). West

Conshohocken : ASTM, 2002.


BSI BS EN 12004 2001 Adhesives for tiles - Definitions and specifications / By British Standards

Institution (BSI). London: BSI, 2001. ISO ISO 15908 2002 Adhesives for thermoplastic piping systems - Test method for the determination of

thermal stability of adhesives / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ADHESIVES - TORSION TESTING ISO ISO 11003-1 2001 Adhesives - Determination of shear behaviour of structural adhesives - P.1: Torsion

test method using butt-bonded hollow cylinders / By International Organization for Standardization (ISO).2nd ed. - - Geneva: ISO, 2001.

AEROBIC BACTERIA ISO ISO 14592-1 2002 Water quality - Evaluation of the aerobic biodegradability of organic compounds at

low concentrations - P.1: Shake-flask batch test with surface water or surface water/sediment suspensions /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14592-2 2002 Water quality - Evaluation of the aerobic biodegradability of organic compounds atlow concentrations - P.2: Continuous flow river model with attached biomass / By International Organizationfor Standardization (ISO). Geneva: ISO, 2002.

AEROSPACE ASTM ASTM 15.03 2002 Space simulation; aerospace and aircraft; high modulus fibers and composites / By

American Society for Testing and Materials (ASTM). West Conshohocken : ASTM, 2002.

AGGREGATES ASTM ASTM 04.02 2002 Concrete and aggregates / By American Society for Testing and Materials (ASTM).

West Conshohocken : ASTM, 2002.

AGRICULTURAL CHEMISTRY Association of Official Agricultural Chemists (AOAC) AOAC 08-7935 2000 V.I Official methods of analysis of AOAC International - V.I: Agricultural

chemicals; contaminants; drugs / By Horwitz, William. 17th ed. - - Maryland : Association of OfficialAgricultural Chemists (AOAC), 2000.


AGRICULTURAL EQUIPMENT CSBTS GB/T 1209 2002 Cutter bars for agricultural machinery / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60335-2-87 2002 Household and similar electrical appliances - Safety - P.2-87: Particular

requirements for electrical animal-stunning equipment / By International Electrotechnical Commission(IEC). 2nd ed. - - Geneva: IEC, 2002.

ISO ISO 5692-2 2002 Agricultural vehicles - Mechanical connections on towed vehicles - P.2: Coupling

ring 40 with socket / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 6489-2 2002 Agricultural vehicles - Mechanical connections between towed and towing vehicles -

P.2: Specification for clevis coupling 40 / By International Organization for Standardization (ISO). 2nd ed. -- Geneva: ISO, 2002.

AGRICULTURAL TRACTORS ISO ISO 12003-1 2002 Agricultural and forestry tractors - Narrow-track wheeled tractors - P.1: Front-

mounted roll-over protective structures / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 12003-2 2002 Agricultural and forestry tractors - Narrow-track wheeled tractors - P.2: Rear-mounted roll-over protective structures / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 5692-2 2002 Agricultural vehicles - Mechanical connections on towed vehicles - P.2: Couplingring 40 with socket / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

AIDS FOR THE DISABLED DSM MS 1184 2002 Code of practice on access for disabled persons to public buildings / By Department of

Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. ISO ISO 7176-23 2002 Wheelchairs - P.23: Requirements and test methods for attendant-operated stair-

climbing devices / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 9999 2002 Technical aids for persons with disabilities - Classification and terminolog / By

International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

AIR ISO ISO 14966 2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles

- Scanning electron microscopy method / By International Organization for Standardization (ISO). Geneva:ISO, 2002.


AIR - ANALYSIS KATS KS B5357 2001 Continuous analyzers for hydrocarbons in ambient air / By Korean Agency for

Technology and Standards (KATS). Kyunggi do: KATS, 2001. KS B5358 2001 Continuous analyzers for carbon monoxide in ambient air / By Korean Agency for

Technology and Standards (KATS). Kyunggi do: KATS, 2001. KS B5359 2001 Continuous analyzers for sulfur dioxide in ambient air / By Korean Agency for

Technology and Standards (KATS). Kyunggi do: KATS, 2001.

AIR CLEANING EQUIPMENT IEC IEC 60335-2-65 2002 Household and similar electrical appliances - Safety - P.2-65: Particular

requirements for air-cleaning appliances / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

AIR COMPRESSORS ISO ISO 10442 2002 Petroleum, chemical and gas service industries - Packaged, integrally geared

centrifugal air compressors / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

AIR FILTERS ISO ISO/TS 11155-2 2002 Road vehicles - Air filters for passenger compartments - P.2: Test for gaseous

filtration / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

AIR PERMEABILITY CSBTS GB/T 7107 2002 Graduation and test method for air permeability performance of windows / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

AIR POLLUTION ISO ISO 14966 2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles

- Scanning electron microscopy method / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

AIRCRAFT ASTM ASTM 15.03 2002 Space simulation; aerospace and aircraft; high modulus fibers and composites / By



ISO ISO 7314 2002 Aerospace - Fluid systems - Metal hose assemblies / By International Organization for

Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

AIRCRAFT COMPONENTS ISO ISO 7314 2002 Aerospace - Fluid systems - Metal hose assemblies / By International Organization for


ALL-OR-NOTHING RELAYS IEC IEC 61811-50 2002 Electromechanical all-or-nothing relays - P.50: Sectional specification -

Electromechanical all-or-nothing telecom relays of assessed quality / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61811-51 2002 Electromechanical all-or-nothing relays - P.51: Blank detail specification -Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types andconstruction / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61811-52 2002 Electromechanical all-or-nothing relays - P.52: Blank detail specification -Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10mm base / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61811-53 2002 Electromechanical all-or-nothing relays - P.52: Blank detail specification -Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9mm base / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61811-54 2002 Electromechanical all-or-nothing relays - P.53: Blank detail specification -Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5mm base / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61811-55 2002 Electromechanical all-or-nothing relays - P.55: Blank detail specification -Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5mm base / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60050-445 2002 International Electrotechnical Vocabulary - P.445: Specified time all-or-nothingrelays / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ALLOYS ISO ISO 11303 2002 Corrosion of metals and alloys - Guidelines for selection of protection methods

against atmospheric corrosion / By International Organization for Standardization (ISO). Geneva: ISO,2002.


ALUMINIUM ISO ISO 6257 2002 Carbonaceous materials used in the production of aluminium - Pitch for electrodes -

Sampling / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ALUMINIUM ALLOYS ASTM ASTM 02.02 2002 Aluminum and magnesium alloys / By American Society for Testing and Materials

(ASTM). West Conshohocken : ASTM, 2002.

AMMONIUM PHOSPHATE CSBTS GB 10205&10209.1-10209.4 2001 GB 10205: Monoammonium phosphate and diammonium

phosphate and their determination methods - GB/T 10209 - P.1: Determination of total nitrogen content formonoammonium phosphate and diammonium phosphate (Titrimetric method after distillation) - P.2:Determination of available phosphate content for monoammonium phosphate and diammonium phosphate -P.3: Determination of water content for monoammonium phosphate and diammonium phosphate - P.4:Determination of particle size for monoammonium phosphate and diammonium phosphate / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

AMPLIFIERS IEC IEC 61291-5-2 2002 Optical amplifiers - P.5-2: Qulaification specifications - c qualification for optical

fibre amplifiers / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

AMPLIFIERS - OPTIC FIBRES IEC IEC 61290-5-3 2002 Optical fibre amplifiers - Basic specification - P.5-3: Test methods for reflectance

parameters - Reflectance tolerance using an electrical spectrum analyser / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

ANAESTHETIC EQUIPMENT ISO ISO 23328-2 2002 Breathing system filters for anaesthetic and respiratory use - P.2: Non-filtration

aspects / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ANALOGUE SIGNALS IEC IEC 61880-2 2002 Video systems (525/60) - Video and accompanied data using the vertical blanking

interval - c- P.2: 525 progressive scan system / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.


ANALYSIS - ALIPHATIC HYDROCARBONS KATS KS B5357 2001 Continuous analyzers for hydrocarbons in ambient air / By Korean Agency for

Technology and Standards (KATS). Kyunggi do: KATS, 2001. KS B5358 2001 Continuous analyzers for carbon monoxide in ambient air / By Korean Agency for

Technology and Standards (KATS). Kyunggi do: KATS, 2001. KS B5359 2001 Continuous analyzers for sulfur dioxide in ambient air / By Korean Agency for

Technology and Standards (KATS). Kyunggi do: KATS, 2001. KS B5360 2001 Continuous analyzers for oxides of nitrogen in ambient air / By Korean Agency for


ANALYSIS - AROMATIC HYDROCARBONS KATS KS B5357 2001 Continuous analyzers for hydrocarbons in ambient air / By Korean Agency for


ANALYSIS - CARBON MONOXIDE KATS KS B5358 2001 Continuous analyzers for carbon monoxide in ambient air / By Korean Agency for


ANALYSIS - OXIDES KATS,. KS B5360 2001 Continuous analyzers for oxides of nitrogen in ambient air / By Korean Agency for


ANALYSIS - SULPHUR DIOXIDE KATS KS B5359 2001 Continuous analyzers for sulfur dioxide in ambient air / By Korean Agency for


ANCHORS ISO ISO 17339 2002 Ships and marine technology - Sea anchors for survival craft and rescue boats / By

International Organization for Standardization (ISO). Geneva: ISO, 2002.

ANIMAL FATS ISO ISO 10539 2002 Animal and vegetable fats and oils - Determination of alkalinit / By International



ISO 10540-3 2002 Animal and vegetable fats and oils - Determination of phosphorus content - P.3:Method using inductively coupled plasma (ICP) optical emission spectroscopy / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 3656 2002 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressedas specific UV extinction / By International Organization for Standardization (ISO). 3rd ed. - - Geneva:ISO, 2002.

ISO 6321 2002 Animal and vegetable fats and oils - Determination of melting point in open capillarytubes (slip point) / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 9832 2002 Animal and vegetable fats and oils - Determination of residual technical hexane content/ By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ANIMAL FEED CSBTS GB 13078 2001 Hygienical standard for feeds / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.1 2001 Laboratory animals - General quality standard for formula feeds / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.2 2001 Laboratory animals - Hygienic standard for formula feeds / By China State Bureau

of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.3 2001 Laboratory animals - Mice and rats formula feeds / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.4 2001 Laboratory animals - Rabbits formula feeds / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.5 2001 Laboratory animals - Guinea pigs formula feeds / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.6 2001 Laboratory animals - Hamsters formula feeds / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.7 2001 Laboratory animals - Dogs formula feeds / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 14924.8 2001 Laboratory animals - Monkeys formula feeds / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB/T 13083 2002 Determination of fluorine in feed - Ion selective electrode method / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 14924.12 2001 Laboratory animals - Formula feeds - Determination of minerals and trace

elements / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB/T 14924.9 2001 Laboratory animals - Formula feeds - Determination of routine nutrients / By

China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. DSM MS 1543 2002 Duck feeds / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM,

2002. ISO ISO 5984 2002 Animal feeding stuffs - Determination of crude ash / By International Organization for

Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.


ISO 5985 2002 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 6579 2002 Microbiology of food and animal feeding stuffs - Horizontal method for the detectionof Salmonella spp. / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.

ISO/TS 17764-1 2002 Animal feeding stuffs - Determination of the content of fatty acids - P.1:Preparation of methyl esters / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/TS 17764-2 2002 Animal feeding stuffs - Determination of the content of fatty acids - P.2: Gaschromatographic method / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ANIMAL FEED - QUALITATIVE ANALYSIS ISO ISO 6870 2002 Animal feeding stuffs - Qualitative determination of zearalenone / By International

Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ANIMAL OILS ISO ISO 10539 2002 Animal and vegetable fats and oils - Determination of alkalinit / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10540-3 2002 Animal and vegetable fats and oils - Determination of phosphorus content - P.3:

Method using inductively coupled plasma (ICP) optical emission spectroscopy / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.




ANTHROPOMETRIC CHARACTERISTICS JSA JIS L4004 2001 Sizing systems for men's garments / By Japanese Standards Association (JSA) and

Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2002. JIS L4005 2001 Sizing systems for women's garments / By Japanese Standards Association (JSA) and

Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2001.

ARC WELDING ISO ISO/TR 17671-1 2002 Welding - Recommendations for welding of metallic materials - P.1: General

guidance for arc welding / By International Organization for Standardization (ISO). Geneva: ISO, 2002. JSA


JIS Z3930 2001 Determination of emission rate of particulate fume in arc welding / By JapaneseStandards Association (JSA) and Japan Welding Engineering Society (JWES). Tokyo: JSA, 2001.

JIS Z3252 2001 Covered electrodes for cast iron / By Japanese Standards Association (JSA). Tokyo:JSA, 2001.

ARC WELDING - ALUMINIUM ALLOYS ISO ISO/TR 17671-4 2002 Welding - Recommendations for welding of metallic materials - P.4: Arc

welding of aluminium and aluminium alloys / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ARC-WELDING EQUIPMENT IEC IEC 60974-5 2002 Arc welding equipment - P.5: Wire feeders / By International Electrotechnical

Commission (IEC). Geneva: IEC, 2002. IEC 60974-2 2002 Arc welding equipment - P.2: Liquid cooling systems / By International

Electrotechnical Commission (IEC). Geneva: IEC; 2002. IEC 60974-10 2002 Arc welding equipment - P.10: Electromagnetic compatibility (EMC) requirements

/ By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ARTISTS EQUIPMENT JSA JIS S6026 2001 Crayons and oil pastels / By Japanese Standards Association (JSA). Tokyo: JSA,

2001. JIS S6028 2001 Water colour paints / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.

ASBESTOS CSBTS GB/T 8071 2001 Chrysotile asbestos / By China State Bureau of Quality and Technical Supervision

(CSBTS). Beijing: CSBTS, 2001.

ASH DETERMINATION ISO ISO 5985 2002 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 5984 2002 Animal feeding stuffs - Determination of crude ash / By International Organization for



ASTM PUBLICATION ASTM ASTM 00.01 2002 Subject index; alphanumeric list / By American Society for Testing and Materials

(ASTM). West Conshohocken : ASTM, 2002. ASTM 01.01 2002 Steel-piping, tubing, fittings / By American Society for Testing and Materials

(ASTM). West Conshohocken : ASTM, 2002. ASTM 01.02 2002 Ferrous castings; ferroalloys / By American Society for Testing and Materials

(ASTM). West Conshohocken : ASTM, 2002. ASTM 01.03 2002 Steel-plate, sheet, strip, wire; stainless steel bar / By American Society for Testing

and Materials (ASTM). West Conshohocken : ASTM, 2002. ASTM 01.04 2002 Steel-structural, reinforcing, pressure vessel, railway / By American Society for

Testing and Materials (ASTM). West Conshohocken : ASTM, 2002. ASTM 01.05 2002 Steel-bars, forgings, bearing, chain, springs / By American Society for Testing and

Materials (ASTM). West Conshohocken : ASTM, 2002. ASTM 01.06 2002 Coated steel products / By American Society for Testing and Materials (ASTM).

West Conshohocken : ASTM, 2002. ASTM 01.07 2002 Ships and marine technology / By American Society for Testing and Materials

(ASTM). West Conshohocken: ASTM, 2002. ASTM 01.08 2002 Fasteners / By American Society for Testing and Materials (ASTM). West

Conshohoken : ASTM, 2002. ASTM 02.01 2002 Copper and copper alloys / By American Society for Testing and Materials

(ASTM). West Conshohocken: ASTM, 2002. ASTM 02.03 2002 Electrical conductors / By American Society for Testing and Materials (ASTM).

West Conshohocken: ASTM, 2002. ASTM 02.04 2002 Nonferrous metals-nickel, cobalt, lead, tin, zinc, cadmium, precious, reactive,

refractory metals and alloys; materials for thermostats, electrical heating and resistance contacts, andconnectors / By American Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 02.05 2002 Metallic and inorganic coatings; metal powders, sintered P/M structural parts / ByAmerican Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 03.01 2002 Metals-mechanical testing; elevated and low-temperature tests; metallograph / ByAmerican Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 03.04 2002 Magnetic properties / By American Society for Testing and Materials (ASTM).West Conshohocken: ASTM, 2002.

ASTM 04.03 2002 Road and paving materials; vehicle-pavement systems / By American Society forTesting and Materials (ASTM). West Conshohocken : ASTM, 2002.

ASTM 04.04 2002 Roofing, waterproofing, and bituminous materials / By American Society forTesting and Materials (ASTM). West Conshohocken : ASTM, 2002.

ASTM 04.05 2002 Chemical-resistant nonmetallic materials; vitrified clay pipe; fiber-reinforced cementproducts; mortars and grouts; masonry / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 04.08 2002 Soil and rock (I) / By American Society for Testing and Materials (ASTM). WestConshohocken : ASTM, 2002.

ASTM 04.09 2002 Soil and rock (II): / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 04.10 2002 Wood / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.


ASTM 05.01 2002 Petroleum products and lubricants (I) / By American Society for Testing andMaterials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 05.02 2002 Petroleum products and lubricants (II) / By American Society for Testing andMaterials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 05.03 2002 Petroleum products and lubricants (III) / By American Society for Testing andMaterials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 05.04 2002 Petroleum products and lubricants (IV) / By American Society for Testing andMaterials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 05.05 2002 Test methods for rating motor, diesel, and aviation fuels; catalysts; manufacturedcarbon and graphite products / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 06.01 2002 Paint-tests for chemical, physical, and optical properties; appearance / By AmericanSociety for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 06.02 2002 Paint-products and applications; protective coatings; pipeline coatings / ByAmerican Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 06.03 2002 Paint-pigments, drying oils, polymers, resins, naval stores, cellulosic esters, and inkvehicles / By American Society for Testing and Materials (ASTM). West conshohocken: ASTM, 2002.

ASTM 06.04 2002 Paint - solvents; aromatic hydrocarbons / By American Society for Testing andMaterials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 08.01 2002 Plastics (I) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 08.02 2002 Plastics (II) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 08.03 2002 Plastics (III) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 08.04 2002 Plastic pipe and building products / By American Society for Testing and Materials(ASTM). West Conshohocken: ASTM, 2002.

ASTM 10.01 2002 Electrical insulation (I) / By American Society for Testing and Materials (ASTM).West Conshohocken: ASTM, 2002.

ASTM 10.02 2002 Electrical insulation (II) / By American Society for Testing and Materials (ASTM).West Conshohocken: ASTM, 2002.

ASTM 10.03 2002 Electrical insulating liquids and gases; electrical protective equipment / ByAmerican Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 10.04 2002 Electronics (I) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 10.05 2002 Electronics (II) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 11.01 2002 Water (I) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 11.02 2002 Water (II) / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 14.02 2002 General test methods; chromatography; forensic sciences; terminology; conformityassessment; statistical methods / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

ASTM 14.03 2002 Temperature measurement / By American Society for Testing and Materials(ASTM). West Conshohocken: ASTM, 2002.


ASTM 14.04 2002 Laboratory apparatus; Degradation of materials; filtration; SI; oxygen fire safety /By American Society for Testing and Materials (ASTM). West Conshohoken: ASTM, 2002.

ASTM 15.01 2002 Refractories; activated carbon, advanced ceramics / By American Society forTesting and Materials (ASTM). West Conshohocken: ASTM, 2002.

ASTM 15.09 2002 Paper; packaging; flexible barrier materials; business imaging products / ByAmerican Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

ATMOSPHERIC CORROSION ISO ISO 11303 2002 Corrosion of metals and alloys - Guidelines for selection of protection methods

against atmospheric corrosion / By International Organization for Standardization (ISO). Geneva: ISO,2002.

AUDIO EQUIPMENT IEC IEC 61883-6 2002 Consumer audio/video equipment - Digital interface - P.6: Audio and music data

transmission protocol / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 62087 2002 Methods of measurement for the power consumption of audio, video and related

equipment / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

AUDIO SYSTEMS IEC IEC 61937-6 2002 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC

60958 - P.6: Non-linear PCM bitstreams according to the MPEG-2 AAC format / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

ISO ISO/IEC 15938-4 2002 Information technology - Multimedia content description interface - P.4: Audio

/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

AUDIOVISUAL MATERIALS IEC IEC/PAS 62292 2001 Draft SMPTE Engineering Guideline SMPTE XXX - Declarative Data Essence /

By International Electrotechnical Commission (IEC). Geneva: IEC, 2001. ISO ISO 15706 2002 Information and documentation - International Standard Audiovisual Number (ISAN)


AUTOMATIC CONTROL SYSTEMS IEC IEC/PAS 62337 2002 Milestones and activities during commissioning of electrical instrumentation and

control systems in the process industry / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.


AXIAL-THRUST BEARINGS KATS KS B2042 2001 Self-aligning thrust roller bearings / By Korean Agency for Technology and Standards

(KATS). Kyunggi do: KATS, 2001.

AXIAL-THRUST BEARINGS - DIMENSIONS ISO ISO 104 2002 Rolling bearings - Thrust bearings - Boundary dimensions, general plan / By

International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.

BAGS - CEMENTS CSBTS GB 9774 2002 Sacks for packing cement / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2002.

BALANCING MACHINES ISO ISO 7475 2002 Mechanical vibration - Balancing machines - Enclosures and other protective measures

for the measuring station / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2002.

BARS (MATERIALS) ASTM ASTM 01.03 2002 Steel-plate, sheet, strip, wire; stainless steel bar / By American Society for Testing

and Materials (ASTM). West Conshohocken: ASTM, 2002. ASTM 01.05 2002 Steel-bars, forgings, bearing, chain, springs / By American Society for Testing and

Materials (ASTM). West Conshohocken: ASTM, 2002.

BEARINGS ASTM ASTM 01.05 2002 Steel-bars, forgings, bearing, chain, springs / By American Society for Testing and

Materials (ASTM). West Conshohocken : ASTM, 2002. KATS KS B2028 2001 Self-aligning roller bearings / By Korean Agency for Technology and Standards

(KATS). Kyunggi do: KATS, 2001. KS B2029 2001 Needle roller bearings / By Korean Agency for Technology and Standards (KATS).

Kyunggi do: KATS, 2001. KS B2030 2001 Magneto ball bearings / By Korean Agency for Technology and Standards (KATS).

Kyunggi do: KATS, 2001.


BEERS CSBTS GB 4927-4928 2001 Beer - GB 4927: Beer - GB 4928: Method for analysis of beer / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

BEND TESTING ISO ISO 5402 2002 Leather - Physical and mechanical tests - Determination of flex resistance by

flexometer method / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

BIODEGRADABILITY ISO ISO 14592-1 2002 Water quality - Evaluation of the aerobic biodegradability of organic compounds at



BIOLOGICAL ANALYSIS AND TESTING ISO ISO 10993-17 2002 Biological evaluation of medical devices - P.17: Establishment of allowable limits

for leachable substances / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10993-4 2002 Biological evaluation of medical devices - P.4: Selection of tests for interactions

with blood / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 15193 2002 In vitro diagnostic medical devices - Measurement of quantities in samples of

biological origin - Presentation of reference measurement procedures / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

BIOTECHNOLOGY ASTM ASTM 11.05 2002 Biological effects and environmental fate; biotechonology; pesticides / By

American Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

BITUMINOUS PRODUCTS ASTM ASTM 04.04 2002 Roofing, waterproofing, and bituminous materials / By American Society for

Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.


BLANKETS IEC IEC 61112 2002 Blankets of insulating material for electrical purposes / By International

Electrotechnical Commission (IEC). Geneva: IEC; 2002.

BLIND RIVETS ISO ISO 15975 2002 Closed end blind rivets with break pull mandrel and protruding head - AI/AIA / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15976 2002 Closed end blind rivets with break pull mandrel and protruding head - St/St / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15977 2002 Open end blind rivets with break pull mandrel and protruding head - AIA/St / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15978 2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/St / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15979 2002 Open end blind rivets with break pull mandrel and protruding head - St/St / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15980 2002 Open end blind rivets with break pull mandrel and countersunk head - St/St / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15981 2002 Open end blind rivets with break pull mandrel and protruding head - AIA/AIA / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15982 2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15983 2002 Open end blind rivets with break pull mandrel and protruding head - A2/A2 / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15984 2002 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16582 2002 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or

Cu/SSt / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16583 2002 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br

or Cu/SSt / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16584 2002 Open end blind rivets with break pull mandrel and protruding head - NiCu/St or

NiCu/SSt / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16585 2002 Closed end blind rivets with pull mandrel and protruding head - A2/SSt / By


BOARD (PAPER) ISO ISO 12192 2002 Paper and board - Compressive strength - Ring crush method / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 186 2002 Paper and board - Sampling to determine average quality / By International

Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002. ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By



ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades andconverted products / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paperand board / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

BOATS ISO ISO 8666 2002 Small craft - Principal data / By International Organization for Standardization (ISO).

Geneva: ISO, 2002. ISO 9093-2 2002 Small craft - Seacocks and through-hull fittings - P.2: Non-metallic / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 9094-2 2002 Small craft - Fire protection - P.2: Craft with a hull length of over 15 m / By


BOATS - HULLS ISO ISO 12215-2 2002 Small craft - Hull construction and scantlings - P.2: Materials: Core materials for

sandwich construction, embedded materials / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 12215-3 2002 Small craft - Hull construction and scantlings - P.3: Materials: Steel, aluminiumalloys wood, other materials / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 12215-4 2002 Small craft - Hull construction and scantlings - P.4: Workshop and manufacturing /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

BOILERS - CODES ASME ASME BPVC 2001 ASME Boiler and Pressure Vessel Code - An international code / By American

Society for Mechanical Engineering (ASME). New York: ASME, 2001.

BRAKING SYSTEMS ISO ISO 6597 2002 Road vehicles - Motor vehicles with hydraulic braking systems with and without

antilock device - Measurement of braking performance / By International Organization for Standardization(ISO). 3rd ed. - - Geneva: ISO, 2002.

ISO/PAS 12158 2002 Road vehicles - Braking systems - Temperature measuring methods / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

BREAKING LOAD ISO ISO 1806 2002 Fishing nets - Determination of mesh breaking force of netting / By International



BREATHING APPARATUS ISO ISO 17510-1 2002 Sleep apnoea breathing therapy - P.1: Sleep apnoea breathing therapy devices / By


BUILDINGS ISO ISO 11600 2002 Building construction - Jointing products - Classification and requirements for

sealants / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ASTM ASTM 04.07 2002 Building seals and sealants; fire standards; dimension stone / By American Society

for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002. ASTM 04.11 2002 Building constructions / By American Society for Testing and Materials (ASTM).

West Conshohocken: ASTM, 2002. ASTM 04.12 2002 Building construction (II): E1671-latest; Property management systems / By

American Society for Testing and Materials (ASTM). West Conshohoken: ASTM, 2002. ASTM 08.04 2002 Plastic pipe and building products / By American Society for Testing and Materials

(ASTM). West Conshohocken: ASTM, 2002. DSM MS 1553 2002 Code of practice on wind loading for building structure / By Department of Standards

Malaysia (DSM). Selangor D.E.: DSM, 2002. ISO ISO 15186-3 2002 Acoustics - Measurement of sound insulation in buildings and of building elements

using sound intensity - P.3: Laboratory measurements at low frequencies / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 834-8 2002 Fire-resistance tests - Elements of building construction - P.8: Specific requirementsfor non-loadbearing vertical separating elements / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

SABS SABS 523 2002 Limes for use in building / By South African Bureau of Standards (SABS). 2.1 ed. - -

Pretoria: SABS, 2002.

BURETTES ISO ISO 8655-3 2002 Piston-operated volumetric apparatus - P.3: Piston burettes / By International


BUSHES (MECHANICAL COMPONENTS) CSBTS GB/T 6804 2002 Sintered metal bushes - Determination of radial crushing strength / By China State



CABLE CORES JSA JIS C6838 2001 Fiber ribbons / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.

CALCIUM INORGANIC COMPOUNDS JSA JIS A9510 2001 Inorganic porous thermal insulation materials / By Japanese Standards Association

(JSA) and Japan Thermal Insulation Association (JTIA). Tokyo: JSA, 2001.

CAMERAS IEC IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-

broadcasting / By International Electrotechnical Commission (IEC). Geneva: IEC 2002.

CANNED FOODS FAO/WHO Codex alimentarius V.9A 2001 Fish and fishery products. S.1: Quick frozen fish and fishery products. /

By Food and Agriculture Organization of the United Nations (FAO) and World Health Organization (WHO).2nd ed. - - Rome: FAO/WHO, 2001. -

Codex general standard for quick frozen fish fillets (CODEX STAN 190-1995)Codex standard for quick frozen block of fish fillets, minced fish and mixtures of fillets and

minced fish flesh (CODEX STAN 165-1989 Rev.1 - 1995)Codex standard for quick frozen finfish, uneviscerated and eviscerated (CODEX STAN 36-1981

Rev.1 1995)Codex standard for quick frozen shrimps or prawns (CODEX STAN 92-1981 Rev.1 - 1995)Codex standard for quick frozen lobsters (CODEX STAN 95-1981 Rev.1 - 1995)Codex standard for quick frozen raw squid (CODEX STAN 191-1995). S.2: Canned fish and

fishery productsCodex standard for canned finfish (CODEX STAN 119-1981 Rev.1 1995)Codex standard for canned salmon (CODEX STAN 3-1981 Rev.1 - 1995)Codex standard for canned tuna and bonito (CODEX STAN 70-1981 Rev.1 - 1995)Codex standard for canned sardine-type products (CODEX STAN 94-1981 Rev.1 1995)Codex standard for canned shrimps or prawns (CODEX STAN 37-1981 Rev.1 - 1995)Codex standard for canned crab meat (CODEX STAN 90-1981 Rev.1 1995). S.3: Other fish and

fishery productsCodex standard for salted fish and dried salted fish of the Gadidae family of fishes (CODEX

STAN 167-1989 Rev.1 1995)Codex standard for dried shark fins (CODEX STAN 189-1993)Codex standard for crackers from marine and freshwater fish, crustacean and molluscan shellfish

(CODEX STAN 222-2001). - S.4: Guidelines for sensory evaluation of fish and shellfishin laboratories

Codex guidelines for sensory evaluation of fish and shellfish in laboratories (CAC/GL 31-1999)


CANNED TUNA FAO/WHO Codex alimentarius V.9A 2001 Fish and fishery products. S.1: Quick frozen fish and fishery products/

By Food and Agriculture Organization of the United Nations (FAO) and World Health Organization (WHO).2nd ed. - - Rome: FAO/WHO, 2001.




fishery productsCodex standard for canned finfish (CODEX STAN 119-1981 Rev.1 1995)Codex standard for canned salmon (CODEX STAN 3-1981 Rev.1 - 1995)Codex standard for canned tuna and bonito (CODEX STAN 70-1981 Rev.1 - 1995)Codex standard for canned sardine-type products (CODEX STAN 94-1981 Rev.1 1995)Codex standard for canned shrimps or prawns (CODEX STAN 37-1981 Rev.1 - 1995)Codex standard for canned crab meat (CODEX STAN 90-1981 Rev.1 1995). S.3: Other fish and





CAP LAMPS - EXPLOSIVE ATMOSPHERES IEC IEC 62013-1 2002 Caplights for use in mines susceptible to firelamp - P.1: General requirements -

Construction and testing in relation to the risk of explosion / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

CARBON BLACK ASTM ASTM 09.01 2002 Rubber, natural and synthetic-general test methods; carbon black / By American

Society for Testing and Materials (ASTM). West Conshohocken : ASTM, 2002.


CARBON FIBRES ISO ISO 10548 2002 Carbon fibre - Determination of size content / By International Organization for


CARGO SHIPS - FUEL CONSUMPTION CSBTS GB/T 7187.3 2001 Fuel oil consumption for transportation ships - Calculation method for inland ships

/ By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing; CSBTS, 2001.

CASSETTES (MAGNETIC TAPES) IEC IEC 60774-4 2002 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on

type VHS - P.4: S-VHS video cassette system - ET-mode / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

ISO ISO/IEC 22092 2002 Information technology - Data interchange on 130 mm magneto-optical disk

cartridges - Capacity: 9,1 G bytes per cartridge / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

CASTINGS ASTM ASTM 01.02 2002 Ferrous castings; ferroalloys / By American Society for Testing and Materials

(ASTM). West Conshohocken : ASTM, 2002.

CATALYSTS ASTM ASTM 05.05 2002 Test methods for rating motor, diesel, and aviation fuels; catalysts; manufactured

carbon and graphite products / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

CELLULAR MATERIALS CSBTS GB/T 10801.2 2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 4590 2002 Rigid cellular plastics - Determination of the volume percentage of open cells and of

closed cells / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.


CEMENTS ASTM ASTM 04.01 2002 Cement; lime; gypsum / By American Society for Testing and Materials (ASTM).

West conshohocken: ASTM, 2002. ASTM 04.05 2002 Chemical-resistant nonmetallic materials; vitrified clay pipe; fiber-reinforced cement

products; mortars and grouts; masonry / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.

DSM MS 1520 2001 Pozzolanic pulverised-fuel ash cement / By Department of Standards Malaysia (DSM).

Selangor D.E; DSM, 2001. SLSI SLS 107 P.1 2002 Ordinary portland cement - P.1: Requirements / By Sri Lanka Standards Institution

(SLSI). 3rd ed. - - Colombo: SLSI, 2002. SLS 107 P.2 2002 Ordinary portlend cement - P.2: Test methods / By Sri Lanka Standards Institution

(SLSI). 3rd ed. - - Colombo: SLSI, 2002.

CERAMIC AND GLASS TECHNOLOGY ASTM ASTM 15.02 2002 Glass; ceramic whitewares / By American Society for Testing and Materials

(ASTM). West Conshohocken: ASTM, 2002.

CERAMICS ASTM ASTM 15.01 2002 Refractories; activated carbon, advanced ceramics / By American Society for

Testing and Materials (ASTM). West Conshohocken: ASTM, 2002. ISO ISO 17561 2002 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for

elastic moduli of monolithic ceramics at room temperature by sonic resonance / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

CEREALS PRODUCTS ISO ISO 6644 2002 Flowing cereals and milled cereal products - Automatic sampling by mechanical means

/ By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

CERTIFICATION (APPROVAL) JSA JIS G0431 2001 Qualification and certification of non-destructive testing (NDT) personnel for steel

products / By Japanese Standards Association (JSA). Tokyo: JSA, 2002.


CHAINS ASTM ASTM 01.05 2002 Steel-bars, forgings, bearing, chain, springs / By American Society for Testing and

Materials (ASTM). West Conshohocken: ASTM, 2002.

CHAIRS CSBTS GB/T 3976 2002 Functional sizes of chairs and desks for educational institutions / By China State


CHANNEL FLOW - LIQUIDS ISO ISO 4363 2002 Measurement of liquid flow in open channels - Methods for measurement of

characteristics of suspended sediment / By International Organization for Standardization (ISO). 3rd ed. - -Geneva: ISO, 2002.

CHARACTER SETS CSBTS GB 5199 2001 Information technology - Chinese ideogram coded character set (basic set) - 16 dot

matrix font / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB 6345 2001 Information technology - Chinese ideogram coded character set (basic set) - 32 dot

matrix font: Song Ti / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing;CSBTS, 2001.

GB/T 11460 2000 Information technology - Test method of the Chinese ideograms font data / ByChina State Bureau of Quality and Technical Supervision (CSBTS). Beijing; CSBTS, 2000.

GB 12041 2001 Information technology - Chinese ideogram coded character set (basic set) - 48 dotmatrix font : Song Ti / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing;CSBTS, 2001.

ISO ISO/IEC 15938-1 2002 Information technology - Multimedia content description interface - P.1:

Systems / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

CHARPY IMPACT TESTS CSBTS GB/T 3808 2002 Verification of pendulum-type impact testing machines / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

CHEMICAL ANALYSIS AND TESTING ISO ISO 14869-2 2002 Soil quality - Dissolution for the determination of total element content - P.2:

Dissolution by alkaline fusion / By International Organization for Standardization (ISO). Geneva: ISO,2002.


ISO 17560 2002 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depthprofiling of boron in silicon / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17973 2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers -Calibration of energy scales for elemental analysis / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

JSA JIS G1201 2001 Iron and steel - General rules for analytical methods / By Japanese Standards

Association (JSA). Tokyo: JSA, 2001. JIS G5502 2001 Spheroidal graphite iron castings / By Japanese Standards Association (JSA) and

Japan High Grade Cast Iron founder's Association (JCIA). Tokyo: JSA, 2001. JIS M8720 2001 Iron ores - Determination of low-temperature reduction-disintegration / By Japanese

Standards Association (JSA) and Japan Iron and Steel Federation (JISF). Tokyo: JSA, 2001. SLSI SLS 154 2001 Method for quantitative chemical analysis of ternary mixtures of protein fibres,

polyamides and certain other fibers / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001. SLS 173 2001 Method for quantitative chemical analysis of binary mixtures of acetate and certain other

fibers / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2001. SLS 197 2002 Method for quantitative chemical analysis of ternary mixtures of viscose rayon, cotton

and protein fibers / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2002.

CHILDPROOF EQUIPMENT - SAFETY MEASURES ISO ISO/IEC Guide 50 2002 Safety aspects - Guidelines for child safety / By International Organization for


CHINESE CHARACTERS CSBTS GB 12041 2001 Information technology - Chinese ideogram coded character set (basic set) - 48 dot

matrix font : Song Ti / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing;CSBTS, 2001.

GB 5007.1 2001 Information technology - Chinese ideogram coded character set (basic set) - 24 dotmatrix font / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

GB 5007.2 2001 Information technology - Chinese ideogram coded character set (auxiliary set) - 24 dotmatrix font / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

GB 6345 2001 Information technology - Chinese ideogram coded character set (basic set) - 32 dotmatrix font: Song Ti / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing;CSBTS, 2001.

CHROMATOGRAPHY ASTM ASTM 14.02 2002 General test methods; chromatography; forensic sciences; terminology; conformity

assessment; statistical methods / By American Society for Testing and Materials (ASTM). WestConshohocken: ASTM, 2002.


JSA JIS K0127 2001 General rules for ion chromatographic analysis / By Japanese Standards Association

(JSA) and Japan Analytical Instruments Manufacturers' Association (JAIMA). Tokyo: JSA, 2001.

CIGARETTES ISO ISO 6565 2002 Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter

rods - Standard conditions and measurement / By International Organization for Standardization (ISO). 3rded. - - Geneva: ISO, 2002.

CINEMATOGRAPHY ISO ISO 2906 2002 Cinematography - Image area produced by camera aperture on 35 mm motion-picture

film - Position and dimensions / By International Organization for Standardization (ISO). 3rd ed. - -Geneva: ISO, 2002.

ISO 8567 2002 Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mmmotion-picture release prints - Position and dimensions / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 17266 2002 Cinematography - Multichannel analogue and digital photographic sound and controlrecords on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

CLASSIFICATION SYSTEMS CSBTS GB/T 4754 2002 Industrial classification for national economic activities / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC/TR 60721-4-0 2002 Classification of environmental conditions - P.4-0: Guidance for the

correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental testsof IEC 60068 - Introduction / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ISO ISO 11600 2002 Building construction - Jointing products - Classification and requirements for

sealants / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 14171 2002 Welding consumables - Wire electrodes and wire-flux combinations for submerged

arc welding of non alloy and fine grain steels - Classification / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 9999 2002 Technical aids for persons with disabilities - Classification and terminology / ByInternational Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

CLEANING EQUIPMENT CSBTS GB 13960.12 2001 Safety of transportable motor-operated electric tools - P.2: Particular requirements

for high pressure cleaners / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2001.


IEC IEC 60335-2-79 2002 Household and similar electrical appliances - Safety - P.2-79: Particular

requirements for high pressure cleaners and steam cleaners / By International Electrotechnical Commission(IEC). 2nd ed. - - Geneva: IEC, 2002.

CLOCKS IEC IEC 60335-2-26 2002 Household and similar electrical appliances - Safety - P.2-26: Particular

requirements for clocks / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC,2002.

CLOTHES DRIERS IEC IEC 60335-2-43 2002 Household and similar electrical appliances - Safety - P.2-43: Partical

requirements for clothes dryers and towel rails / By International Electrotechnical Commission (IEC). 3rded. - - Geneva: IEC, 2002.

COAL TAR - DISINFECTANTS SABS SABS 47 2001 Coal-tar type disinfectant liquids (black and white) / By South African Bureau of

Standard (SABS). 3rd ed. - - Pretoria: SABS, 2001.

COATED FABRICS CSBTS GB/T 12584 2001 Rubber or plastics coated fabrics - Low-temperature impact test / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB/T 12585 2001 Rubber, vulcanized or thermoplastic - Rubber sheet and rubber-coated fabric -

Determination rate of volatile liquids (gravimetic technique) / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2001.

COATINGS ASTM ASTM 06.02 2002 Paint-products and applications; protective coatings; pipeline coatings / By


COATINGS - WALLS CSBTS GB/T 9755 2001 Synthetic resin emulsion coatings for exterior wall / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001. GB/T 9756 2001 Synthetic resin emulsion coatings for interior wall / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.


COCOA DSM MS 870 2001 Malaysian cocoa powder / By Department of Standards Malaysia (DSM). Selangor

D.E.: DSM, 2001.

CODED REPRESENTATION ISO ISO 639-1 2002 Codes for the representation of names of languages - P.1: Alpha-2 code / By


CODES CSBTS GB/T 2260 2002 Codes for the administrative divisions of the People's Republic of China / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 4657 2002 Codes for the Central Party and State Organs People's Communities and the others

State Organizations / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.

ISO ISO 639-1 2002 Codes for the representation of names of languages - P.1: Alpha-2 code / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 8579-1 2002 Acceptance code for gear units - P.1: Test code for airborne sound / By International


CODING (DATA CONVERSION) ISO ISO/IEC 15444-4 2002 Information technology - JPEG 2000 image coding system - P.4: Conformance

testing / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15475-3 2002 Information technology - CDIF transfer format - P.3: Encoding ENCODING.1

/ By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC TR 15947 2002 Information technology - Security techniques - IT intrusion detection

framework / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

COFFEE ISO ISO 6670 2002 Instant coffee - Sampling method for bulk units with liners / By International


COKE ASTM ASTM 05.06 2002 Gaseous fuels; coal and coke / By American Society for Testing and Materials

(ASTM). West Conshohocken: ASTM, 2002.


COLOUR-FASTNESS TESTS CSBTS GB/T 8424-3 2001 Textiles - Tests for colour fastness - Calculation of colour differences / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing; CSBTS, 2001. GB/T 8424.1 2001 Textiles - Tests for colour fastness - General principles for measurement of surface

colour / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing; CSBTS, 2001. GB/T 8424.2 2001 Textiles - Tests for colour fastness - Instrumental assessment of relative whiteness /

By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing; CSBTS, 2001.

COMMUNICATION CABLES IEC IEC 62012-1 2002 Multicore and symmetrical pair/quad cables for digital communications to be used

in harsh environments - P.1: Generic specification / By International Electrotechnical Commission (IEC).Geneva: IEC; 2002.

COMMUNICATION EQUIPMENT BSI BS EN 60950-1 2002 Information technology equipment - Safety - P.1: General requirements / By

British Standards Institution (BSI). London: BSI, 2002.

COMMUNICATION NETWORKS IEC IEC 61156-1 2002 Multicore and symmetrical pair/quad cables for digital communications - P.1:

General specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61850-3 2002 Communication networks and systems in substations - P.3: General requirements /

By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61850-4 2002 Communication networks and systems in substations - P.4: System and project

management / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

COMMUNICATION PROCEDURES DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3:

Techniques for the management of IT security / By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2002.

MS 1536 P.4 2002 Information technology - Guidelines for the management of IT security - P.4:Selection of safeguards / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

COMPRESSIVE STRENGTH CSBTS GB/T 10424 2002 Sintered metal friction materials - Determination of compressive strength / By

China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.


ISO ISO 12192 2002 Paper and board - Compressive strength - Ring crush method / By International


COMPRESSORS IEC IEC 60335-2-34 2002 Household and similar electrical appliances - Safety - P.2-34: Particular

requirements for motor-compressors / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

COMPUTER APPLICATIONS ISO ISO 15929 2002 Graphic technology - Prepress digital data exchange - Guidelines and principles for

the development of PDF/X standards / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

COMPUTERS ASTM ASTM 14.01 2002 Healthcare informatics; computerized systems and chemical and material

information / By American Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002.

CONCRETE ACI ACI 318/318R 2002 Building code requirements for structural concrete (ACI 318-02) and commentary

(ACI 318R-02) / By American Concrete Institute (ACI). Farmington Hills: ACI, 2002. ASTM ASTM 04.02 2002 Concrete and aggregates / By American Society for Testing and Materials (ASTM).

West Conshohocken: ASTM, 2002.

CONSTRUCTION EQUIPMENT ISO ISO 15643 2002 Road construction and maintenance equipment - Bituminous binder spreaders/sprayers

- Terminology and commercial specifications / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

CONSTRUCTION MATERIALS ISO ISO 13784-1 2002 Reaction-to-fire tests for sandwich panel building systems - P.1: Test method for

small rooms / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO 15148 2002 Hygrothermal performance of building materials and products - Determination ofwater absorption coefficient by partial immersion / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

CONSTRUCTION MATERIALS - FIRE TESTS ISO ISO 1182 2002 Reaction to fire tests for building products - Non-combustibility test / By International

Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002. ISO 1716 2002 Reaction to fire tests for building products - Determination of the heat of combustion /

By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

CONSTRUCTION MATERIALS - IGNITABILITY ISO ISO 11925-2 2002 Reaction to fire tests - Ignitability of building products subjected to direct

impingement of flame - P.2: Single-flame source test / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.

CONSTRUCTION SYSTEMS DSM MS 1535 P.2 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.2:

General construction / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

CONSUMABLE ELECTRODES ISO ISO 14171 2002 Welding consumables - Wire electrodes and wire-flux combinations for submerged


ISO 14341 2002 Welding consumables - Wire electrodes and deposits for gas shielded metal arcwelding of non alloy and fine grain steels - Classification / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

ISO 14344 2002 Welding and allied processes - Flux and gas shielded electrical welding processes -Procurement guidelines for consumables / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 2560 2002 Welding consumables - Covered electrodes for manual metal arc welding of non-alloyand fine grain steels - Classification / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

CONTRACEPTIVE DEVICES ISO ISO 16037 2002 Rubber condoms for clinical trials - Measurement of physical properties / By



ISO 4074 2002 Natural latex rubber condoms - Requirements and test methods / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 7439 2002 Copper-bearing intra-uterine contraceptive devices - Requirements, tests / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

CONTROL SYSTEMS ISO ISO 15622 2002 Transport information and control systems - Adaptive cruise control systems -

Performance requirements and test procedures / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 15623 2002 Transport information and control systems - Forward vehicle collision warningsystems - Performance requirements and test procedures / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

CONVEYOR BELTS CSBTS GB/T 12753 2002 Steel wire ropes for conveyer belts / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 7984 2001 Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile

construction for general use / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing; CSBTS, 2001.

GB/T 9770 2001 Steel cord conveyor belts for general use / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2001.

COOKING APPLIANCES DSM MS 1535 P.1 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.1:

Specification / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.2 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.2:

General construction / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.3 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.3: Test

methods / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.4 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.4:

Glossary / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 60335-2-14 2002 Household and similar electrical appliances - Safety - P.2-14: Particular

requirements for kitchen machines / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

IEC 60335-2-31 2002 Household and similar electrical appliances - Safety - P.2-31: Particularrequirements for range hoods / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva:IEC, 2002.


IEC 60335-2-36 2002 Household and similar electrical appliances - Safety - P.2-36: Particularrequirements for commercial electric cooking range, ovens, hobs and hob elements / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-6 2002 Household and similar electrical appliances - Safety - P.2-6: Particularrequirements for stationary cooking ranges, hobs, ovens and similar appliances / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-9 2002 Household and similar electrical appliances - Safety - P.2-9: Particularrequirements for grills, toasters and similar portable cooking appliances / By International ElectrotechnicalCommission (IEC). 5th ed. - - Geneva: IEC, 2002.

COTTON SLSI SLS 137 P.1 2000 Grey cotton yarn - P.1: For Powerloom / By Sri Lanka Standards Institution (SLSI).

2nd ed. - - Colombo: SLSI, 2000. SLS 288 2000 Method for determination of the fluidity of cotton, rayons and cellulose acetate in

cuprammonium hydroxide solution / By Sri Lanka Standards Institution (SLSI). Colombo: SLSI, 2000. SLS 369 2001 Polyester cotton/rayon shirting materials / By Sri Lanka Standards Institution (SLSI).

Colombo: SLSI, 2001.

COUNTERSUNK FASTENERS ISO ISO 15980 2002 Open end blind rivets with break pull mandrel and countersunk head - St/St / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15982 2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15984 2002 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16583 2002 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br

or Cu/SSt / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

COVERED ELECTRODES JSA JIS Z3252 2001 Covered electrodes for cast iron / By Japanese Standards Association (JSA). Tokyo:

JSA, 2001. JIS Z3930 2001 Determination of emission rate of particulate fume in arc welding / By Japanese

Standards Association (JSA) and Japan Welding Engineering Society (JWES). Tokyo: JSA, 2001.

CRANES DSM MS 1544 P.1 2002 Cranes - Safe use - P.1: General / By Department of Standards Malaysia (DSM).

Selangor D.E.: DSM, 2002.


CRAYONS JSA JIS S6026 2001 Crayons and oil pastels / By Japanese Standards Association (JSA). Tokyo: JSA,

2001.

CRIMPED CONNECTORS JSA JIS C2814-2-2 2001 Connecting devices for low voltage circuits for household and similar purposes -

P.2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units/ By Japanese Standards Association (JSA) and Japan Electrical Safety & Environment TechnologyLaboratories (JET). Tokyo: JSA, 2002.

JIS C2814-2-3 2001 Connecting devices for low voltage circuits for household and similar purposes -P.2-3: Particular requirements for connecting devices as separate entities with insulation piercing clampingunits / By Japanese Standards Association (JSA) and Japan Electrical Safety & Environment TechnologyLaboratories (JET). Tokyo: JSA, 2002.

JIS C2814-2-4 2001 Connecting devices for low-voltage circuits for household and similar purposes -P.2-4: Particular requirements for twist-on connecting devices / By Japanese Standards Association (JSA)and Japan Electrical Safety & Environment Technology Laboratories (JET). Tokyo: JSA, 2002.

CRUSHING TESTS CSBTS GB/T 6804 2002 Sintered metal bushes - Determination of radial crushing strength / By China State


CURRENT TRANSFORMERS IEC IEC 60044-8 2002 Instrument transformers - P.8: Electronic current transformers / By International

Electrotechnical Commission (IEC). Geneva: IEC, 2002.

CUTTER BARS CSBTS GB/T 1209 2002 Cutter bars for agricultural machinery / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

CYCLES - CHILDREN ISO ISO 8098 2002 Cycles - Safety requirements for bicycles for young children / By International



DAIRY PRODUCTS FAO/WHO

Codex alimentarius V.12 2000 Milk and milk products. / By Food and Agriculture Organization of theUnited Nations (FAO) and World Health Organization (WHO). 2nd ed. - - Rome: FAO/WHO, 2000.

Codex general standard for the use of dairy terms (CODEX STAN 206-1999). - S.2: Codexstandards for various milk products

Codex standard for butter (CODEX STAN A-1-1971, Rev.1-1999)Codex standard for milk fat products (CODEX STAN A-2-1973, Rev.1-1999)Codex standard for evaporated milks (CODEX STAN A-3-1971, Rev.1-1999)Codex standard for sweetened condensed milks (CODEX STAN A-4-1971, Rev.1-1999)Codex standard for cheese (CODEX STAN A-6-1978, Rev.1-1999)Codex standard for whey cheese (CODEX STAN A-7-1978, Rev.1-1999)Codex general standard for named variety process(ed) cheese and spreadable process(ed) cheese

(CODEX STAN A-8(a)-1978)Codex general standard for process(ed) cheese and spreadable process(ed) cheese (CODEX

STAN A-8(b)-1978)Codex general standard for process(ed) cheese and preparations process(ed) cheese food and

process(ed) cheese spread) (CODEX STAN A-8(c)-1978)Codex standard for cream for direct consumption (CODEX STAN A-9-1976)Codex standard for yoghurt (yogurt) and sweetened yoghurt (sweetened yogurt) (CODEX STAN

A-11(a) -1975)Codex standard for flavoured yoghurt (yogurt) and products heat-treated after fermentation

(CODEX STAN A-11(b) -1976)Codex standard for whey powders (CODEX STAN A-15 -1995)Codex standard for edible casein products (CODEX STAN A-18 -1995)Codex standard for milk powders and cream powder (CODEX STAN A-207 -1999)Codex group standards for cheeses in brine (CODEX STAN 208-1999) - S.3: Codex international

individual cheese standardsCodex international individual standards for Cheddar (CODEX STAN C-1-1966)Codex international individual standards for Danbo (CODEX STAN C-3-1966)Codex international individual standards for Edam (CODEX STAN C-4-1966)Codex international individual standards for Gouda (CODEX STAN C-5-1966)Codex international individual standards for Havarti (CODEX STAN C-6-1966)Codex international individual standards for Samsoe (CODEX STAN C-7-1966)Codex international individual standards for Emmentaler (CODEX STAN C-9-1967)Codex international individual standards for Tilsiter (CODEX STAN C-11-1968)Codex international individual standards for Saint-Paulin (CODEX STAN C-13-1968)Codex international individual standards for Provolone (CODEX STAN C-15-1968)Codex international individual standards for Cottage cheese, including creamed cottage cheese

(CODEX STAN C-16-1968)Codex international individual standards for Coulommiers (CODEX STAN C-18-1968)Codex international individual standards for cream cheese (CODEX STAN C-31-1973)Codex international individual standards for Camembert (CODEX STAN C-33-1973)


Codex international individual standards for Brie (CODEX STAN C-34-1973)Codex international individual standards for extra hard grating cheese (CODEX STAN C-35-

1978). - S.4: Recommended international code of hygienic practice for dried milk. - S.5:Guidelines for the preservation of raw milk by use of the lactoperoxidase system.

ISO ISO 13559 2002 Butter, fermented milks and fresh cheese - Enumeration of contaminating

microorganisms - Colony-count technique at 30 degrees C / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

DANGEROUS MATERIALS DSM MS 1513 P.1 Sub-P.1 2002 Packaging - Transport of dangerous goods - P.1: General provision,

definitions and training - Sub-P.1: General provisions / By Department of Standards Malaysia (DSM).Selangor D.E.: DSM, 2002.

MS 1513 P.5 Sub-P.2 2001 Packaging - Transport of dangerous goods - P.5: Consignment procedures -Sub-P.2: Marking, labelling and placarding / By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.

MS 1513 P.5 Sub-P.4 2002 Packaging - Transport of dangerous goods - P.5: Consignment procedures -Sub-P.4: Special provisions / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

MS 1513 P.7 2002 Packaging - Transport of dangerous goods - P.7: Provisions concerning transportoperations / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

DATA BASE LANGUAGES ISO ISO/IEC 13249-1 2002 Information technology - Database languages - SQL multimedia and

application packages - P.1: Framework / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO/IEC 13249-6 2002 Information technology - Database languages - SQL multimedia andapplication packages - P.6: Data mining / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

DATA LINK LAYER (OSI) IEC IEC 61491 2002 Electrical equipment of industrial machines - Serial data link for real-time

communication between controls and drives / By International Electrotechnical Commission (IEC). 2nd ed.- - Geneva: IEC, 2002.

IEC 62056-46 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.46: Data link layer using HDLC protocol / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

DATA PROCESSING DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3:




DATA QUALITY ISO ISO 19113 2002 Geographic information - Quality principles / By International Organization for


DATA STRUCTURES IEC IEC/PAS 61987-1 2002 Industrial-process measurement and control - Data structures and elements in

process equipment catalogues - P.1: Measuring equipment with analogue and digital output / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

DATA TRANSFER ISO ISO 14961 2002 Space data and information transfer systems - Parameter value language specification

/ By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO/IEC 15474-1 2002 Information technology - CDIF framework - P.1: Overview / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15474-2 2002 Information technology - CDIF framework - P.2: Modeling and extensibility /

By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15475-1 2002 Information technology - CDIF transfer format - P.1: General rules for syntaxes

and encodings / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15475-2 2002 Information technology - CDIF transfer format - P.2: Syntax SYNTAX.1 / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15475-3 2002 Information technology - CDIF transfer format - P.3: Encoding ENCODING.1

/ By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15476-2 2002 Information technology - CDIF semantic metamodel - P.2: Common / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15746-1 2002 Information technology - CDIF semantic metamodel - P.1: Foundation / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/PAS 16917 2002 Ships and marine technology - Data transfer standard for maritime and

intermodel transportation and security / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

DATA TRANSMISSION IEC IEC 61883-6 2002 Consumer audio/video equipment - Digital interface - P.6: Audio and music data

transmission protocol / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


DEFIBRILLATORS IEC IEC 60601-2-4 2002 Medical electrical equipment - P.2-4: Particular requirements for the safety of

cardiac defibrillators / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

DEMULSIFICATION NUMBER BSI BS 2000-19 2002 Methods of test for petroleum and its products - BS 2000-19: Determination of

demulsibility characteristics of lubricating oil / By British Standards Institution (BSI). London: BSI, 2002.

DENSITOMETERS ISO ISO 15212-2 2002 Oscillation-type density meters - P.2: Process instruments for homogeneous liquids


DENSITY MEASUREMENT CSBTS GB/T 10421 2002 Sintered metal friction materials - Determination of density / By China State Bureau

of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 2420 2002 Leather - Physical and mechanical tests - Determination of apparent density / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

DENTAL EQUIPMENT ISO ISO 7787-4 2002 Dental rotary instruments - Cutters - P.4: Miniature carbide laboratory cutters / By


DENTAL EQUIPMENT - IMPLANTS (SURGICAL) ISO ISO 10451 2002 Dental implant systems - Contents of technical file / By International Organization for


DENTAL ROTARY-CUTTING INSTRUMENTS ISO ISO 7787-4 2002 Dental rotary instruments - Cutters - P.4: Miniature carbide laboratory cutters / By


DENTISTRY ISO ISO 7787-4 2002 Dental rotary instruments - Cutters - P.4: Miniature carbide laboratory cutters / By



DESIGN IEC IEC 61188-5-1 2002 Printed boards and printed board assemblies - Design and use - P.5-1: Attachment

(land/joint) considerations - Generic requirements / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

DESIGNATIONS ISO ISO 10366-1 2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding

and extrusion materials - P.1: Designation system and basis for specifications / By International Organizationfor Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 6402-1 2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusionmaterials - P.1: Designation system and basis for specifications / By International Organization forStandardization (ISO). 4th ed. - - Geneva: ISO, 2002.

ISO 2580-1 2002 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -P.1: Designation system and basis for specifications / By International Organization for Standardization(ISO). 5th ed. - - Geneva: ISO; 2002.

DESKS CSBTS GB/T 3976 2002 Functional sizes of chairs and desks for educational institutions / By China State


DETECTORS ISO ISO 6579 2002 Microbiology of food and animal feeding stuffs - Horizontal method for the detection

of Salmonella / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.

DETERMINATION OF CONTENT CSBTS GB 2440&2441.1-2441.9 2001 Urea and its determination - GB 2440: Urea - GB/T 2441:

Determination of urea - P.1: Determination of total nitrogen content - P.2: Determination of biuret content -Spectrophotometric method - P.3: Determination of water content - Karl Fischer method - P.4:Determination of iron content -1,10-Phenanthroline spectrophotometric method - P.5: Determination ofalkalinity - Titrimetric method - P.6: Determination of water insolution matter content - Weight method -P.7: Determination of particle size - Sieve method - P.8: Determination of sulphate content - Visibleturbidimetric method - P.9: Determination of methylenediurea content - Spectrophotometric method / ByChina State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

GB/T 13083 2002 Determination of fluorine in feed - Ion selective electrode method / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.


ISO ISO 10540-3 2002 Animal and vegetable fats and oils - Determination of phosphorus content - P.3:


ISO 15885 2002 Milk fat - Determination of the fatty acid composition by gas-liquid chromatograph /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/TS 17764-1 2002 Animal feeding stuffs - Determination of the content of fatty acids - P.1:Preparation of methyl esters / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/TS 17764-2 2002 Animal feeding stuffs - Determination of the content of fatty acids - P.2: Gaschromatographic method / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

JSA JIS G1201 2001 Iron and steel - General rules for analytical methods / By Japanese Standards

Association (JSA). Tokyo: JSA, 2001. JIS G5502 2001 Spheroidal graphite iron castings / By Japanese Standards Association (JSA) and

Japan High Grade Cast Iron founder's Association (JCIA). Tokyo: JSA, 2001.

DIAGNOSIS (MEDICAL) ISO ISO 15194 2002 In vitro diagnostic medical devices - Measurement of quantities in samples of

biological origin - Description of reference materials / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

ISO 15193 2002 In vitro diagnostic medical devices - Measurement of quantities in samples ofbiological origin - Presentation of reference measurement procedures / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 19001 2002 In vitro diagnostic medical devices - Information supplied by the manufacturer with invitro diagnostic reagents for staining in biology / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

IEC IEC 61676 2002 Medical electrical equipment - Dosimetric instruments used for non-invasive

measurement of X-ray tube voltage in diagnostic radiology / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

SLSI SLS 951 2001 Examination rubber gloves / By Sri Lanka Standards Institution (SLSI). Colombo:

SLSI, 2001.

DIAGNOSTIC TESTING MACHINE TOOLS ISO ISO 13373-1 2002 Condition monitoring and diagnostics of machines - Vibration condition monitoring

- P.1: General procedures / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


DIAGRAMS ISO ISO 14617-15 2002 Graphical symbols for diagrams - P.15: Installation diagrams and network maps /

By International Organization for Standardization (ISO). Geneva: ISO, 2002. JSA JIS B0125-2 2001 Fluid power systems and components - Graphic symbols and circuit diagrams - P.2:

Circuit diagrams / By Japanese Standards Association (JSA) and Japan Fluid Power Association (JFPA).Tokyo: JSA, 2001.

DIESEL ENGINES ISO ISO 12345 2002 Diesel engines - Cleanliness assessment of fuel injection equipment / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16147 2002 Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components


DIGITAL SIGNALS IEC IEC 61280-2-9 2002 Fibre optic communication subsystem test procedures - P.2-9: Digital systems -

Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

DILUTORS ISO ISO 8655-4 2002 Piston-operated volumetric apparatus - P.4: Dilutors / By International Organization

for Standardization (ISO). Geneva: ISO, 2002.

DIMENSIONAL CHANGE ISO ISO 18903 2002 Imaging materials - Films and paper - Determination of dimensional change / By


DIMENSIONAL TOLERANCES ISO ISO 9444 2002 Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on

dimensions and form / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO,2002.

DISABLED PEOPLE DSM MS 1184 2002 Code of practice on access for disabled persons to public buildings / By Department of



DISHWASHING MACHINES IEC IEC 60335-2-5 2002 Household and similar electrical appliances - Safety - P.2-5: Particular

requirements for dishwashers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

DISPENSERS ISO ISO 8655-5 2002 Piston-operated volumetric apparatus - P.5: Dispensers / By International


DISPERSIONS (CHEMICAL) ISO ISO 15632 2002 Microbeam analysis - Instrumental specification for energy dispersive X-ray

spectrometers with semiconductor detectors / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

DOSIMETERS IEC IEC 61676 2002 Medical electrical equipment - Dosimetric instruments used for non-invasive


ISO ISO/ASTM 51276 2002 Practice for use of a polymethylmethacrylate dosimetry system / By

International Organization for Standardization (ISO) and American Society for Testing and Materials(ASTM). 2nd ed. - - Geneva: ISO, 2002.

ISO/ASTM 52116 2002 Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator /By International Organization for Standardization (ISO) and American Society for Testing and Materials(ASTM). Geneva: ISO, 2002.

DRAINAGE ISO ISO 4633 2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines -

Specification for materials / By International Organization for Standardization (ISO). 3rd ed. - - Geneva:ISO, 2002.

DRIED MILK ISO ISO 11814 2002 Dried milk - Assessment of heat treatment intensity - Method using high-performance

liquid chromatograph / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO 14892 2002 Dried skimmed milk - Determination of vitamin D content using high-performanceliquid chromatograph / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

DRILLING MACHINES ISO ISO 13625 2002 Petroleum and natural gas industries - Drilling and production equipment - Marine

drilling riser couplings / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

DRUMS (CONTAINERS) ISO ISO 15750-3 2002 Packaging - Steel drums - P.3: Inserted flange-type closure systems / By


DRY-HEAT TESTS ISO ISO 17227 2002 Leather - Physical and mechanical tests - Determination of dry heat resistance of

leather / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

EARPHONES IEC IEC 61842 2002 Microphones and earphones for speech communications / By International


EARTH-MOVING EQUIPMENT ISO ISO 14397-1 2002 Earth-moving machinery - Loaders and backhoe loaders - P.1: Calculation of rated

operating capacity and test method for verifying calculated tipping load / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 14397-2 2002 Earth-moving machinery - Loaders and backhoe loaders - P.2: Test method formeasuring breakout forces and lift capacity to maximum lift height / By International Organization forStandardization (ISO). Geneva ISO, 2002.

EDIBLE ALCOHOLS CSBTS GB 10343 2002 Edible alcohol / By China State Bureau of Quality and Technical Supervision


EDUCATIONAL FACILITIES CSBTS GB/T 3976 2002 Functional sizes of chairs and desks for educational institutions / By China State



ELECTRIC CABLES CSBTS GB/T 8815 2002 Plasticized polyvinyl chloride (PVC) compounds for wire and cable / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60853-3 2002 Calculation of the cyclic and emergency current rating of cables - P.3: Cyclic rating

factor for cables of all voltages, with partial drying of the soil / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC/PAS 62338 2002 Screened balanced cables - Coupling attenuation measurement, triaxial method /By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTRIC CELLS IEC IEC 61982-2 2002 Secondary batteries for the propulsion of electric road vehicles - P.2: Dynamic

discharge performance test and dynamic endurance test / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

ELECTRIC CONDUITS IEC IEC 61386-21 2002 Conduit systems for cable management - P.21: Particular requirements - Rigid

conduit systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61386-22 2002 Conduit systems for cable management - P.22: Particular requirements - Pliable

conduit systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61386-23 2002 Conduit systems for cable management - P.23: Particular requirements - Flexible

conduit systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTRIC CONNECTORS IEC IEC 60512-2-1 2002 Connectors for electronic equipment - Tests and measurements - P.2-1: Electrical

continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60512-2-3 2002 Connectors for electronic equipment - Tests measurements - P.2-3: Electricalcontinuity and contact resistance tests - Test 2c: Contact resistance variation / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60512-6-1 2002 Connectors for electronic equipment - Tests and measurements - P.6-1: Dynamicstress tests - Test 6a: Acceleration, steady state / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 60512-6-2 2002 Connectors for electronic equipment - Tests and measurements - P.6-2: Dynamicstess tests - Test 6b: Bump / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60512-6-3 2002 Connectors for electronic equipment - Tests and measurements - P.6-3: Dynamicstress tests - Test 6c: Shock / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


IEC 60512-1-2 2002 Connectors for electronic equipment - Tests and measurements - P.1-2: Generalexamination - Test 1b: Examination of dimension and mass / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

IEC 60512-11-2 2002 Connectors for electronic equipment - Tests and measurements - P.11-2:Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60512-11-3 2002 Connectors for electronic equipment - Tests and measurements - P.11-3:Climatic tests - Test 11c: Damp heat, steady state / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 60512-11-6 2002 Connectors for electronic equipment - Tests and measurements - P.11-6:Climatic tests - Test 11f: Corrosion, salt mist / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 60512-11-12 2002 Connectors for electronic equipment - Tests and measurements - P.11-12:Climatic tests - Test 11m: Damp heat, cyclic / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 60512-11-9 2002 Connectors for electronic equipment - Tests and measurements - P.11-9:Climatic tests - Test 11i: Dry heat / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 60512-11-10 2002 Connectors for electronic equipment - Tests and measurements - P.11-10:Climatic tests - Test 11J: Cold / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60512-11-13 2002 Connectors for electronic equipment - Tests and measurements - P.11-13:Climatic tests - Test 11n: Gas tightness, solderless wrapped connections / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 60512-25-2 2002 Connectors for electronic equipment - Tests and measurements - P.25-2: Test25b - Attenuation (insertion loss) / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 60603-7-1 2002 Connectors for electronic equipment - P.7-1: Detail specification for 8-way,shielded free and fixed connectors with common mating features, with assessed quality / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/PAS 61076-3-104 2002 Connectors for electronic equipment - P.3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum /By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/PAS 61076-3-111 2002 Connectors for electronic equipment - P.3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to250 MHz / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRIC CONTROL EQUIPMENT CSBTS GB 14048.5 2001 Low-voltage switchgear and controlgear - P.5-1: Control circuit devices and

switching element - Electromechanical control circuit devices / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2001.

IEC IEC 60947-5-4 2002 Low-voltage switchgear and controlgear - P.5-4: Control circuit devices and

switching elements - Method of assessing the performance of low-energy contacts - Special tests / ByInternational Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.


IEC 60947-6-2 2002 Low-voltage switchgear and controlgear - P.6-2: Multiple function equipment -Control and protective switching devices (or equipment) (CPS) / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60947-7-1 2002 Low-voltage switchgear and controlgear - P.7-1: Ancillary equipment - Terminalblocks for copper conductors / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva:IEC, 2002.

IEC 60947-7-2 2002 Low-voltage switchgear and controlgear - P.7-2: Ancillary equipment - Protectiveconductor terminal blocks for copper conductors / By International Electrotechnical Commission (IEC). 2nded. - - Geneva: IEC, 2002.

IEC 60947-7-3 2002 Low-voltage switchgear and controlgear - P.7-3: Ancillary equipment - Safetyrequirements for fuse terminal blocks / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 62271-105 2002 High-voltage switchgear and controlgear - P.105: Alternating current switch-fusecombinations / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/PAS 62271-109 2002 High-voltage switchgear and controlgear - P.109: Alternating-current seriescapacitor by-pass switches / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/TR 62271-308 2002 High-voltage switchgear and controlgear - P.308: Guide for asymmetricalshort-circuit breaking test duty T100a / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

ELECTRIC CONVERTORS IEC IEC 61800-4 2002 Adjustable speed electrical power drive systems - P.4: General requirements -

Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTRIC CURRENT CSBTS GB/T 762 2002 Standard current ratings / By China State Bureau of Quality and Technical Supervision


ELECTRIC FENCES IEC IEC 60335-2-76 2002 Household and similar electrical appliances - Safety - P.2-76: Particular

requirements for electric fence energizers / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

ELECTRIC FURNACES IEC IEC 60519-6 2002 Safety in electroheat installations - P.6: Specifications for safety in industrial

microwave heating equipment / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva:IEC, 2002.


IEC 60676 2002 Industrial electroheating equipment - Test methods for direct arc furnaces / ByInternational Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

ELECTRIC GENERATORS CSBTS GB/T 2820.7 2002 Reciprocating internal combustion engine driven alternating current generating sets

- P.7: Technical declarations for specification and design / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.

IEC IEC/TR 61400-24 2002 Wind turbine generator systems - P.24: Lighting protection / By International


ELECTRIC INSULATORS IEC IEC 61952 2002 Insulators for overhead lines - Composite line post insulators for alternative insulators

for alternative current with a nominal voltage > 1 000 V / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

ELECTRIC MOTORS IEC IEC 60335-2-34 2002 Household and similar electrical appliances - Safety - P.2-34: Particular

requirements for motor-compressors / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

ELECTRIC POWER STATIONS IEC IEC/TR 62140-1 2002 Fossil-fired steam power stations - P.1: Limiting controls / By International


ELECTRIC POWER SYSTEMS DSM MS 1533 2002 Recommended practices in monitoring electric power quality / By Department of


ELECTRIC SUBSTATIONS IEC IEC 61850-3 2002 Communication networks and systems in substations - P.3: General requirements /

By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61850-4 2002 Communication networks and systems in substations - P.4: System and project

management / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


ELECTRIC WIRES CSBTS GB/T 8815 2002 Plasticized polyvinyl chloride (PVC) compounds for wire and cable / By China State


ELECTRICAL CABLES IEC IEC 60331-12 2002 Tests for electric cables under fire conditions - Circuit integrity - P.12: Apparatus -

Fire with shock at a temperature of at least 830 �C / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

ELECTRICAL COMPONENTS - CLASSIFICATION SYSTEMS IEC IEC 61360-2 2002 Standard data element types with associated classification scheme for electric

components - P.2: EXPRESS dictionary schema / By International Electrotechnical Commission (IEC). 2nded. - - Geneva: IEC, 2002.

ELECTRICAL CONDUCTIVITY IEC IEC 61788-7 2002 Superconductivity - P.7: Electronic characteristic measurements - Surface resistance

of superconductors at microwave frequencies / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 61788-10 2002 Superconductivity - P.10: Critical temperature measurement - Critical temperatureof Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method / By InternationalElectrotechnical Commission (IEC). Geneva: IEC; 2002.

IEC 61788-12 2002 Superconductivity - P.12: Matrix to superconductor volume ratio measurement -Copper to non-copper volume ratio of Nb3Sn composite superconducting wires / By InternationalElectrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRICAL ENGINEERING CSBTS GB/T 2900.5 2002 Electrotechnical terminology - Insulating solids, liquids and gases / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 2900.55 2002 Electrotechnical terminology - Live working / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60027-3 2002 Letter symbols to be used in electrical technology - P.3: Logarithmic and related

quantities, and their units / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC,2002.


IEC 60079-1-1 2002 Electrical apparatus for explosive gas atmospheres - P.1-1: Flameproof enclosures"d" - Method of test for ascertainment of maximum experimental safe gap / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 61936-1 2002 Power installations exceeding 1 kV a.c. - P.1: Common rules / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTRICAL HOUSEHOLD APPLIANCES BSI BS EN 55014-1 2001 Electromagnetic compatibility - Requirements for household appliances, electric

tools and similar apparatus - P.1: Emission / By British Standards Institution (BSI). London: BSI, 2002. IEC CISPR 14-1 2000 Electromagnetic compatibility - Requirements for household appliances, electric

tools and similar apparatus - P.1: Emission / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

IEC 60335-2-10 2002 Household and similar electrical appliances - Safety - P.2-10: Particularrequirements for floor treatment machines and wet scrubbing machines / By International ElectrotechnicalCommission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-101 2002 Household and similar electrical appliances - Safety - P.2-101: Particularrequirements for vaporizers / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60335-2-103 2002 Household and similar electrical appliances - Safety - P.2-103: Particularrequirements for drives for gates, doors and windows / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 60335-2-11 2002 Household and similar electrical appliances - Safety - P.2-11: Particularrequirements for tumble dryers / By International Electrotechnical Commission (IEC). 6th ed. - - Geneva:IEC, 2002.

IEC 60335-2-12 2002 Household and similar electrical appliances - Safety - P.2-12: Particularrequirements for warming plates and similar appliances / By International Electrotechnical Commission(IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-13 2002 Household and similar electrical appliances - Safety - P.2-13: Particularrequirements for deep fat fryers, frying pans and similar appliances / By International ElectrotechnicalCommission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-14 2002 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

IEC 60335-2-17 2002 Household and similar electrical appliances - Safety - P.2-17: Particularrequirements for blankets, pads and similar flexible heating appliances / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-21 2002 Household and similar electrical appliances - Safety - P.2-21: Particularrequirements for storage water heaters / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.

IEC 60335-2-25 2002 Household and similar electrical appliances - Safety - P.2-25: Particularrequirements for microwave ovens, including combination microwave ovens / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-26 2002 Household and similar electrical appliances - Safety - P.2-26: Particularrequirements for clocks / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva: IEC,2002.


IEC 60335-2-28 2002 Household and similar electrical appliances - Safety - P.2-28: Particularrequirements for sewing machines / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

IEC 60335-2-3 2002 Household and similar electrical appliances - Safety - P.2-3: Particularrequirements for electric irons / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

IEC 60335-2-31 2002 Household and similar electrical appliances - Safety - P.2-31: Particularrequirements for range hoods / By International Electrotechnical Commission (IEC). 4th ed. - - Geneva:IEC, 2002.

IEC 60335-2-34 2002 Household and similar electrical appliances - Safety - P.2-34: Particularrequirements for motor-compressors / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

IEC 60335-2-35 2002 Household and similar electrical appliances - Safety - P.2-35: Particularrequirements for instantaneous water heaters / By International Electrotechnical Commission (IEC). 4th ed.- - Geneva: IEC, 2002.

IEC 60335-2-36 2002 Household and similar electrical appliances - Safety - P.2-36: Particularrequirements for commercial electric cooking range, ovens, hobs and hob elements / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-37 2002 Household and similar electrical appliances - Safety - P.2-37: Particularrequirements for commercial electric deep fat fryers / By International Electrotechnical Commission (IEC).5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-4 2002 Household and similar electrical appliances - Safety - P.2-4: Particularrequirements for spin extractors / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

IEC 60335-2-43 2002 Household and similar electrical appliances - Safety - P.2-43: Particalrequirements for clothes dryers and towel rails / By International Electrotechnical Commission (IEC). 3rded. - - Geneva: IEC, 2002.

IEC 60335-2-44 2002 Household and similar electrical appliances - Safety - P.2-44: Particularrequirements for ironers / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC,2002.

IEC 60335-2-45 2002 Household and similar electrical appliances - Safety - P.2-45: Particularrequirements for portable heating tools and similar appliances / By International ElectrotechnicalCommission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-5 2002 Household and similar electrical appliances - Safety - P.2-5: Particularrequirements for dishwashers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

IEC 60335-2-52 2002 Household and similar electrical appliances - Safety - P.2-52: Particularrequirements for oral hygiene appliances / By International Electrotechnical Commission (IEC). 3rd ed. - -Geneva: IEC, 2002.

IEC 60335-2-53 2002 Household and similar electrical appliances - Safety - P.2-53: Particularrequirements for sauna heating appliances / By International Electrotechnical Commission (IEC). 3rd ed. - -Geneva: IEC, 2002.

IEC 60335-2-56 2002 Household and similar electrical appliances - Safety - P.2-56: Particularrequirements for projectors and similar appliances / By International Electrotechnical Commission (IEC).3rd ed. - - Geneva: IEC, 2002.


IEC 60335-2-59 2002 Household and similar electrical appliances - Safety - P.2-59: Particularrequirements for insect killers / By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva:IEC, 2002.

IEC 60335-2-61 2002 Household and similar electrical appliances - Safety - P.2-61: Particularrequirements for thermal-storage room heaters / By International Electrotechnical Commission (IEC). 2nded. - - Geneva: IEC, 2002.

IEC 60335-2-65 2002 Household and similar electrical appliances - Safety - P.2-65: Particularrequirements for air-cleaning appliances / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

IEC 60335-2-66 2002 Household and similar electrical appliances - Safety - P.2-66: Particularrequirements for water-bed heaters / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

ELECTRICAL INSTALLATIONS IEC IEC 60079-17 2002 Electrical apparatus for explosive gas atmospheres - P.17: Inspection and

maintenance of electrical installations in hazardous areas (other than mines) / By InternationalElectrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 61822 2002 Electrical installations for lighting and beaconing of aerodromes - Constant currentregulators / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 62094-1 2002 Indicator light units for household and similar fixed-electrical installations - P.1:General requirements / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/TS 62143 2002 Electrical installations for lighting and beaconing of aerodromes - Aeronauticalground lighting systems - Guidelines for the development of a safety lifecycle methodolog / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTRICAL INSTALLATIONS - LIGHTING SYSTEMS IEC IEC 61821 2002 Electrical installations for lighting and beaconing of aerodromes - Maintenance of

aeronautical ground lighting constant current series circuits / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

ELECTRICAL INSULATING MATERIALS CSBTS GB/T 5019 2002 Insulating materials based on mica - Methods of test / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60903 2002 Live working - Gloves of insulating material / By International Electrotechnical

Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC/TR 62062 2002 Results of the Round Robin series of tests to evaluate proposed amendments to

IEC 60112 / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61111 2002 Matting of insulating material for electrical purposes / By International

Electrotechnical Commission (IEC). Geneva: IEC; 2002. IEC 61112 2002 Blankets of insulating material for electrical purposes / By International

Electrotechnical Commission (IEC). Geneva: IEC; 2002.


ISO ISO/TTA 4 2002 Measurement of thermal conductivity of thin films on silicon substrates / By


ELECTRICAL INSULATING TAPES SABS SABS 122 2001 Pressure-sensitive adhesive tapes for electrical purposes (Metric units) / By South

African Bureau of Standards (SABS). Pretoria; SABS, 2001.

ELECTRICAL INSULATION IEC IEC 61857-22 2002 Electrical insulation systems - Procedures for thermal evaluation - P.22: Specific

requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS) / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/TS 60071-5 2002 Insulation co-ordination - P.5: Procedures for high-voltage direct current(HVDC) converter stations / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60664-1 2002 Insulation coordination for equipment within low-voltage systems - P.1: Principles,requirements and tests / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ELECTRICAL MEDICAL EQUIPMENT IEC IEC 61676 2002 Medical electrical equipment - Dosimetric instruments used for non-invasive


IEC/TR 62266 2002 Medical electrical equipment - Guidelines for implementation of DICOM inradiotherapy / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTRICAL PROTECTION EQUIPMENT ASTM ASTM 10.03 2002 Electrical insulating liquids and gases; electrical protective equipment / By

American Society for Testing and Materials (ASTM). West Conshohocken : ASTM, 2002. IEC IEC 60895 2002 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and

�; 600 kV d.c. / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC 60984 2002 Sleeves of insulating material for live working / By International Electrotechnical

Commission (IEC). Geneva: IEC; 2002.

ELECTRICALLY-OPERATED DEVICES CSBTS GB 13960.12 2001 Safety of transportable motor-operated electric tools - P.2: Particular requirements

for high pressure cleaners / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2001.



requirements for electric irons / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

ISO ISO 8714 2002 Electric road vehicles - Reference energy consumption and range - Test procedures for

passenger cars and light commercial vehicles / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ELECTRICITY SUPPLY METERS IEC IEC 62056-42 2002 Electricity metering - Data exchange for meter reading, tariff and load control -

P.42: Physical layer services and procedures for connection-oriented asynchronous data exchange / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 62056-46 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.46: Data link layer using HDLC protocol / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

IEC 62056-53 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.53: COSEM application layer / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 62056-61 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.61: Object identification system (OBIS) / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

IEC 62056-62 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.62: Interface classes / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/TR 62059-11 2002 Electricity metering equipment - Dependability - P.11: General concepts / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/TR 62059-21 2002 Electricity metering equipment - Dependability - P.21: Collection of meterdependability data from the field / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ELECTROMAGNETIC COMPATIBILITY (EMC) BSI BS EN 55020 2002 Sound and television broadcast receivers and associated equipment - Immunity

characteristics - Limits and methods of measurement / By British Standards Institution (BSI). London: BSI,2002.

BS EN 61000-4-3 2002 Electromagnetic compatibility (EMC) - P.4-3: Testing and measurementtechniques - Radiated, radio-frequency, electromagnetic field immunity test / By British StandardsInstitution (BSI). London: BSI, 2002.

BS EN 61326 1998 Electrical equipment for measurement, control and laboratory use - EMCrequirements / By British Standards Institution (BSI). London: BSI, 2002.

IEC CISPR 14-1 2000 Electromagnetic compatibility - Requirements for household appliances, electric

tools and similar apparatus - P.1: Emission / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.


IEC 60728-2 2002 Cabled distribution systems for television and sound signals - P.2: Electromagneticcompatibility for equipment / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60974-10 2002 Arc welding equipment - P.10: Electromagnetic compatibility (EMC) requirements/ By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61000-3-3 2002 Electromagnetic compatibility (EMC) - P.3-3: Limits - Limitation of voltagechanges, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with ratedcurrent <= 16 A per phase and not subject to conditional connection / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 61000-4-13 2002 Electromagnetic compatibility (EMC) - P.4-13: Testing and measurementtechniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequencyimmunity tests / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61000-4-3 2002 Electromagnetic compatibility (EMC) - P.4-3: Testing and measurementtechniques - Radiated, radio-frequency, electromagnetic field immunity test / By InternationalElectrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61000-4-3 2002 Electromagnetic compatibility (EMC) - P.4-3: Testing and measurementtechniques - Radiated, radio-frequency, electromagnetic field immunity test / By InternationalElectrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61000-4-32 2002 Electromagnetic compatibility (EMC) - P.4-32: Testing and measurementtechniques - High-altitude electromagnetic pulse (HEMP) simulator compendium / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61000-4-7 2002 Electromagnetic compatibility (EMC) - P.4-7: Testing and measurementtechniques - General guide on harmonics and interharmonics measurements and instrumentation, for powersupply systems and equipment connected thereto / By International Electrotechnical Commission (IEC). 2nded. - - Geneva: IEC, 2002.

IEC/TS 61000-6-5 2001 Electromagnetic compatibility (EMC) - P.6-5: Generic standards - lmmunityfor power station and substation environments / By International Electrotechnical Commission (IEC).Geneva: IEC, 2001.

IEC 61000-2-4 2002 Electromagnetic compatibility (EMC) - P.2-4: Environment - Compatibility levelsin industrial plants for low-frequency conducted disturbances / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC; 2002.

TISI TIS 1955 2542 (1999) Lighting and similar equipment: Radio disturbance limits / By Thai Industrial

Standards Institute (TISI). Bangkok: TISI.,2000. TIS 1956 2542 (1999) Information technology equipment: Radio disturbance limits / By Thai

Industrial Standards Institute (TISI). Bangkok: TISI.,2000.

ELECTRONIC DATA INTERCHANGE (EDI)

ISO ISO 9735-10 2002 Electronic data interchange for administration, commerce and transport (EDIFACT)

- Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - P.10: Syntax servicedirectories / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO/TS 20625 2002 Electronic data interchange for administration, commerce and transport(EDIFACT) - Rules for generation of XML scheme files (XSD) on the basis of EDI (FACT) implementationguidelines / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ELECTROSTATICS IEC IEC 61340-3-1 2002 Electrostatics - P.3-1: Methods for simulation of electrostatic effects - Human

body model (HBM) - Component testing / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

IEC 61340-3-2 2002 Electrostatics - P.3-2: Methods for simulation of electrostatic effects - Machinemodel (MM) - Component testing / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

EMISSION BSI BS EN 55014-1 2001 Electromagnetic compatibility - Requirements for household appliances, electric

tools and similar apparatus - P.1: Emission / By British Standards Institution (BSI). London: BSI, 2002. IEC IEC 61000-3-3 2002 Electromagnetic compatibility (EMC) - P.3-3: Limits - Limitation of voltage

changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with ratedcurrent <= 16 A per phase and not subject to conditional connection / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

ISO ISO 12141 2002 Stationary source emissions - Determination of mass concentration of particulate

matter (dust) at low concentrations - Manual gravimetric method / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

TISI TIS 1365 1996 (2539) Gasoline engined vehicles: safety requirements; emission from engine, level 4 /

By Thai Industrial Standards Institute (TISI). Bangkok : TISI, 1996. TIS 1440 1997 (2540) Gasoline engined vehicles: Safety requirements; emission from engine, level 5 /

By Thai Industrial Standards Institute (TISI). Bangkok: TISI, 1997.

ENDURANCE TESTING IEC IEC 60216-3 2002 Electrical insulating materials - Thermal endurance properties - P.3: Instructions for

calculating thermal endurance characteristics / By International Electrotechnical Commission (IEC).Geneva: IEC; 2002.

IEC 61982-2 2002 Secondary batteries for the propulsion of electric road vehicles - P.2: Dynamicdischarge performance test and dynamic endurance test / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

ISO ISO 7206-4 2002 Implants for surgery - Partial and total hip joint prostheses - P.4: Determination of

endurance properties of stemmed femoral components / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.


ENERGY SOURCES IEC IEC 60335-2-76 2002 Household and similar electrical appliances - Safety - P.2-76: Particular

requirements for electric fence energizers / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

ENERGY TRANSFER ISO ISO 13602-1 2002 Technical energy systems - Methods for analysis - P.1: General / By International


ENGINE FUEL SYSTEMS ISO ISO 15500-14 2002 Road vehicles - Compressed natural gas (CNG) fuel system components - P.14:

Excess flow valve / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ENVIRONMENTAL MANAGEMENT ISO ISO 19011 2002 Guidelines for quality and/or environmental management systems auditing / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/TR 14062 2002 Environmental management - Integrating environmental aspects into product

design and development / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/TS 14048 2002 Environmental management - Life cycle assessment - Data documentation format

/ By International Organization for Standardization (ISO). Geneva ISO, 2002.

ENVIRONMENTAL TESTING IEC IEC/TR 60721-4-0 2002 Classification of environmental conditions - P.4-0: Guidance for the

correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental testsof IEC 60068 - Introduction / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ISO ISO 10109-4 2002 Optics and optical instruments - Environmental requirements - P.4: Test

requirements for telescopic systems / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 9022-2 2002 Optics and optical instruments - Environmental test methods - P.2: Cold, heat andhumidity / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 9022-4 2002 Optics and optical instruments - Environmental test methods - P.4: Salt mist / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

JSA JIS C0078 2000 Fire hazard testing - P.10: Guidance and test methods for the minimization of the

effects of abnormal heat on electrotechnical products involved in fires - S.2: Method for testing productsmade from non-metallic materials for resistance to heat using the ball pressure test / By Japanese StandardsAssociation (JSA) and Japanese Industrial Standard from Reliability Center for Electronic Components ofJapan (RCT). Tokyo: JSA, 2002.


JIS C0120 2000 Classification of environmental conditions - P.3: Classification of groups ofenvironmental parameters and their severities - S.9: Microclimates inside products / By Japanese StandardsAssociation (JSA) and Japanese Industrial Standard from Reliability Center for Electronic Components ofJapan (RCT). Tokyo: JSA, 2002.

ERGONOMICS ISO ISO/TR 14105 2001 Electronic imaging - Human and organizational issues for successful Electronic

Image Management (EIM) implementation / By International Organization for Standardization (ISO).Geneva: ISO, 2001.

ISO 14915-1 2002 Software ergonomics for multimedia user interfaces - P.1: Design principles andframework / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14915-3 2002 Software ergonomics for multimedia user interfaces - P.3: Media selection andcombination / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

SIO/TR 19358 2002 Ergonomics - Construction and application of tests for speech technology / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ESSENTIAL OILS ISO ISO 3517 2002 Oil of neroli (Citrus aurantium L. ssp. aurantium syn. Citrus aurantium L. ssp. amara

var. pumilia) / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 3518 2002 Oil of sandalwood (Santalum album L.) / By International Organization for

Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 3757 2002 Oil of patchouli [Pogostemon cabin (Blanco) Benth.] / By International Organization

for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 4720 2002 Essential oils - Nomenclature / By International Organization for Standardization

(ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 4735 2002 Oils of Citrus - Determination of CD value by ultraviolet spectrometric analysis / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 9843 2002 Oil of cedarwood, Chinese type (Cupressus funebris Endlicher) / By International


FATTY ACIDS ISO ISO 15884 2002 Milk fat - Preparation of fatty acid methyl esters / By International Organization for

Standardization (ISO). Geneva: ISO, 2002. ISO 15885 2002 Milk fat - Determination of the fatty acid composition by gas-liquid chromatography /

By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/TS 17764-1 2002 Animal feeding stuffs - Determination of the content of fatty acids - P.1:

Preparation of methyl esters / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/TS 17764-2 2002 Animal feeding stuffs - Determination of the content of fatty acids - P.2: Gas

chromatographic method / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


FERROUS METALS JSA JIS G0431 2001 Qualification and certification of non-destructive testing (NDT) personnel for steel

products / By Japanese Standards Association (JSA). Tokyo: JSA, 2002. JIS G1201 2001 Iron and steel - General rules for analytical methods / By Japanese Standards

Association (JSA). Tokyo: JSA, 2001. JIS G1213 2001 Iron and steel - Methods for determination of manganese content / By Japanese

Standards Association (JSA). Tokyo: JSA, 2001.

FIBRE OPTIC CABLES IEC IEC 60793-2-30 2002 Optical fibres - P.2-30: Product specifications - Sectional specification for

category A3 multimode fibres / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60793-2-40 2002 Optical fibres - P.2-40: Product specifications - Sectional specification for

category A4 multimode fibres / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60793-2-50 2002 Optical fibres - P.2-50: Product specifications - Sectional specification for class

B single-mode fibres / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60794-3-10 2002 Optical fibre cables - P.3-10: Outdoor cables - Family specification for duct and

directly buried optical telecommunication cables / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

FIBRE OPTIC CONNECTORS IEC IEC 61300-3-28 2002 Fibre optic interconnecting devices and passive components - Basic test and

measurement procedures - P.3-28: Examinations and measurements - Transient loss / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61753-021-2 2002 Fibre optic interconnecting devices and passive component performancestandard - P.021-2: Fibre optic connectors terminated on single-mode fibre for category C - Controlledenvironment / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61754-4 2002 Fibre optic connector interfaces - P.4: Type SC connector family / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/PAS 61300-3-29 2002 Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - P.3-29: Examinations and measurements - Measurement techniques forcharacterizing the amplitude of the spectral transfer function of DWDM components / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/PAS 61300-3-35 2002 Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - P.3-35: Examinations and measurements - Fibre optic cylindrical connectorendface visual inspection / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

FIBRE OPTICS IEC IEC 62148-1 2002 Fibre optic active components and devices - Package and interface standards - P.1:

General and guidance / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC/TR 61282-3 2002 Fibre optic communication system design guides - P.3: Calculation of

polarization mode dispersion / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


IEC/TR 62285 2002 Non-linear coefficient measuring methods - Application guide / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

FIRE EXTINGUISHERS DSM MS 1539 P.1 2002 Portable fire extinguishers - P.1: Construction and testing methodology / By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

FIRE RESISTANCE ISO ISO 834-8 2002 Fire-resistance tests - Elements of building construction - P.8: Specific requirements

for non-load bearing vertical separating elements / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 5660-1 2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - P.1: Heatrelease rate (cone calorimeter method) / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

FIRE TESTS IEC IEC 60331-12 2002 Tests for electric cables under fire conditions - Circuit integrity - P.12: Apparatus -

Fire with shock at a temperature of at least 830 �C / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC/TS 60695-7-51 2002 Fire hazard testing - P.7-51: Toxicity of fire effluent - Estimation of toxicpotency: Calculation and interpretation of test results / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

ISO ISO 9239-1 2002 Reaction to fire tests for floorings - P.1: Determination of the burning behaviour

using a radiant heat source / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2002.

ISO 15791-1 2002 Plastics - Development and use of intermediate-scale fire tests for plastics products -P.1: General guidance / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

FISH PRODUCTS FAO/WHO Codex alimentarius V.9A 2001 Fish and fishery products. S.1: Quick frozen fish and fishery products -

/ By Food and Agriculture Organization of the United Nations (FAO) and World Health Organization(WHO). 2nd ed. - - Rome: FAO/WHO, 2001.

Codex general standard for quick frozen fish fillets (CODEX STAN 190-1995)Codex standard for quick frozen finfish, uneviscerated and eviscerated (CODEX STAN 36-1981


fishery productsCodex standard for canned tuna and bonito (CODEX STAN 70-1981 Rev.1 - 1995)


Codex standard for canned sardine-type products (CODEX STAN 94-1981 Rev.1 1995)Codex standard for canned shrimps or prawns (CODEX STAN 37-1981 Rev.1 - 1995)Codex standard for canned crab meat (CODEX STAN 90-1981 Rev.1 1995). S.3: Other fish and





FISHERY PRODUCTS FAO/WHO Codex alimentarius V.9A 2001 Fish and fishery products. S.1: Quick frozen fish and fishery products -

/ By Food and Agriculture Organization of the United Nations (FAO) and World Health Organization(WHO). 2nd ed. - - Rome: FAO/WHO, 2001.




fishery productsCodex standard for canned sardine-type products (CODEX STAN 94-1981 Rev.1 1995)Codex standard for canned shrimps or prawns (CODEX STAN 37-1981 Rev.1 - 1995)Codex standard for canned crab meat (CODEX STAN 90-1981 Rev.1 1995). S.3: Other fish and



(CODEX STAN 222-2001). - S.4: Guidelines for sensory evaluation of fish and shellfishin laboratories -


FLEXIBLE PIPES ISO ISO 6605 2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods / By International

Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 7314 2002 Aerospace - Fluid systems - Metal hose assemblies / By International Organization for



FLOOR CLEANING EQUIPMENT IEC IEC 60335-2-10 2002 Household and similar electrical appliances - Safety - P.2-10: Particular

requirements for floor treatment machines and wet scrubbing machines / By International ElectrotechnicalCommission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-67 2002 Household and similar electrical appliances - Safety - P.2-67: Particularrequirements for floor treatment and floor cleaning machines, for industrial and commercial use / ByInternational Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-72 2002 Household and similar electrical appliances - Safety - P.2-69: Particularrequirements for automatic machines for floor treatment for commercial and industrial use / By InternationalElectrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

FLUORESCENT LAMPS

IEC IEC 60081 2002 Double-capped fluorescent lamps - Performance specifications / By International

Electrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002. IEC 60400 2002 Lampholders for tubular fluorescent lamps and starterholders / By International

Electrotechnical Commission (IEC). 6th ed. - - Geneva: IEC, 2002.

FLUORINE CSBTS GB/T 13083 2002 Determination of fluorine in feed - Ion selective electrode method / By China State


FLUSHING CISTERNS DSM MS 795 2002 WC flushing cisterns and flush pipes / By Department of Standards Malaysia (DSM).

Selangor D.E.: DSM, 2002.

FOOD PRODUCTS ISO ISO 6579 2002 Microbiology of food and animal feeding stuffs - Horizontal method for the detection

of Salmonella spp. / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.

FORESTRY EQUIPMENT ISO ISO 17591 2002 Machinery for forestry - Knuckleboom log loaders - Identification terminology,

classification and component nomenclature / By International Organization for Standardization (ISO).Geneva: ISO, 2002.


FRYING PANS


requirements for deep fat fryers, frying pans and similar appliances / By International ElectrotechnicalCommission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-37 2002 Household and similar electrical appliances - Safety - P.2-37: Particularrequirements for commercial electric deep fat fryers / By International Electrotechnical Commission (IEC).5th ed. - - Geneva: IEC, 2002.

TISI TIS 1509 1998 (2541) Deep fat fryers, frying pans and similar: safety requirement / By Thai Industrial

Standards Institute (TISI). Bangkok: TISI, 1998.

FUNCTIONAL ANALYSIS ISO ISO/IEC 14143-2 2002 Information technology - Software measurement - Functional size measurement

- P.2: Conformity evaluation of software size measurement methods of ISO/IEC 14143-1 1998 / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

GAS CHROMATOGRAPHY ISO ISO 15009 2002 Soil quality - Gas chromatographic determination of the content of volatile aromatic

hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermaldesorption / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 16588 2002 Water quality - Determination of six complexing agents - Gas-chromatographicmethod / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

GAS CYLINDERS ISO ISO 11119-1 2002 Gas cylinders of composite construction - Specification and test methods - P.1:

Hoop wrapped composite gas cylinders / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 11119-2 2002 Gas cylinders of composite construction - Specification and test methods - P.2:Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 11623 2002 Transportable gas cylinders - Periodic inspection and testing of composite gascylinders / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

GAS TURBINES ISO ISO 3977-3 2002 Gas turbines - Procurement - P.3: Design requirements / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 3977-7 2002 Gas turbines - Procurement - P.7: Technical information / By International



ISO 3977-8 2002 Gas turbines - Procurement - P.8: Inspection, testing, installation and commissioning/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

GAUGES

IEC IEC 60061-1-4 2002 Lamp caps and holders together with gauges for the control of interchangeability

and safety - P.1: Lamp caps - P.2: Lampholders - P.3: Gauges - P.4: Guidelines and general information / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

GEAR DRIVES

ISO ISO 8579-1 2002 Acceptance code for gear units - P.1: Test code for airborne sound / By International


GRAPHIC SYMBOLS

IEC IEC 60417-1 2002 Graphical symbols for use on equipment - P.1: Overview and application / By

International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002. IEC 80416-3 2002 Basic principles for graphical symbols for use on equipment - P.3: Guidelines for

the application of graphical symbols / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 80416-1 2001 Basic principles for graphical symbols for use on equipment - P.1: Creation ofsymbol originals / By International Electrotechnical Commission (IEC). Geneva: ISO, 2001.

ISO 5859 1991 Aerospace - Graphic symbols for schematic drawings of hydraulic and pneumaticsystems and components / By International Organization for Standardization (ISO). Geneva: ISO, 1991.

ISO 14617-15 2002 Graphical symbols for diagrams - P.15: Installation diagrams and network maps /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

HEATERS - SAUNAS IEC IEC 60335-2-53 2002 Household and similar electrical appliances - Safety - P.2-53: Particular

requirements for sauna heating appliances / By International Electrotechnical Commission (IEC). 3rd ed. - -Geneva: IEC, 2002.

HORTICULTURAL EQUIPMENT IEC IEC 60335-2-92 2002 Household and similar electrical appliances - Safety - P.2-92: Particular

requirements for pedestrain-controlled mains-operated lawn scarifiers and aerators / By InternationalElectrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60335-2-94 2002 Household and similar electrical appliances - Safety - P.2-94: Particularrequirements for scissors type grass shears / By International Electrotechnical Commission (IEC). 2nd ed. -- Geneva: IEC, 2002.


HYDRAULIC MOTORS ISO ISO 4392-1 2002 Hydraulic fluid power - Determination of characteristics of motors - P.1: At constant

low speed and constant pressure / By International Organization for Standardization (ISO). 3rd ed. - -Geneva: ISO, 2002.

ISO 4392-2 2002 Hydraulic fluid power - Determination of characteristics of motors - P.2: Startability/ By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

HYDRAULIC TRANSMISSION SYSTEMS ISO ISO 18413 2002 Hydraulic fluid power - Cleanliness of parts and components - Inspection document

and principles related to contaminant collection, analysis and data reporting / By International Organizationfor Standardization (ISO). Geneva: ISO, 2002.

ISO 4392-1 2002 Hydraulic fluid power - Determination of characteristics of motors - P.1: At constantlow speed and constant pressure / By International Organization for Standardization (ISO). 3rd ed. - -Geneva: ISO, 2002.

ISO 4392-2 2002 Hydraulic fluid power - Determination of characteristics of motors - P.2: Startability/ By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

ISO 6072 2002 Hydraulic fluid power - Compatibility between fluids and standard elastomericmaterials / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 6162-1 2002 Hydraulic fluid power - Flange connectors with split or one-piece flange clamps andmetric or inch screws - P.1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar),DN 13 to DN 127 / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 6162-2 2002 Hydraulic fluid power - Flange connectors with split or one-piece flange clamps andmetric or inch screws - P.2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar),DN 13 to DN 51 / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 6605 2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO/TR 10949 2002 Hydraulic fluid power - Component cleanliness - Guidelines for achieving andcontrolling cleanliness of components from manufacture to installation / By International Organization forStandardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO/TR 16144 2002 Hydraulic fluid power - Calibration of liquid automatic particle counters -Procedures used to certify the standard reference material SRM 2806 / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

IMMERSION HEATERS IEC IEC 60335-2-73 2002 Household and similar electrical appliances - Safety - P.2-73: Particular

requirements for fixed immersion heaters / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

IEC 60335-2-74 2002 Household and similar electrical appliances - Safety - P.2-74: Particularrequirements for portable immersion heaters / By International Electrotechnical Commission (IEC). 2nd ed.- - Geneva: IEC, 2002.


IMPACT TESTING CSBTS GB/T 9096 2002 Sintered metal materials, excluding hardmetals - Impact test method / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO 6272-1 2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - P.1: Falling-

weight test, large-area indenter / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 6272-2 2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - P.2: Falling-weight test, small-area indenter / By International Organization for Standardization (ISO). Geneva: ISO,2002.

IMPLANTS (SURGICAL) ISO ISO 13779-4 2002 Implants for surgery - Hydroxyapatite - P.4: Determination of coating adhesion

strength / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14242-1 2002 Implants for surgery - Wear of total hip-joint prostheses - P.1: Loading and

displacement parameters for wear-testing machines and corresponding environmental conditions for test / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14243-1 2002 Implants for surgery - Wear of total knee-joint prostheses - P.1: Loading anddisplacement parameters for wear-testing machines with load control and corresponding environmentalconditions for test / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 21534 2002 Non-active surgical implants - Joint replacement implants - Particular requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 21535 2002 Non-active surgical implants - Joint replacement implants - Specific requirements forhip-joint replacement implants / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 21536 2002 Non-active surgical implants - Joint replacement implants - Specific requirements forknee-joint replacement implants / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 7206-4 2002 Implants for surgery - Partial and total hip joint prostheses - P.4: Determination ofendurance properties of stemmed femoral components / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.

INFORMATION EXCHANGE DSM MS 1536 P.3 2002 Information technology - Guidelines for the management of IT security - P.3:



IEC IEC 62056-42 2002 Electricity metering - Data exchange for meter reading, tariff and load control -

P.42: Physical layer services and procedures for connection-oriented asynchronous data exchange / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.


IEC 62056-53 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.53: COSEM application layer / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 62056-61 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.61: Object identification system (OBIS) / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

IEC 62056-62 2002 Electricity metering - Data exchange for meter reading, tariff and load control -P.62: Interface classes / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ISO ISO/IEC 10589 2002 Information technology - Telecommunications and information exchange

between systems - Intermediate System to Intermediate System intra-domain routeing information exchangeprotocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO8473) / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO/IEC 11582 2002 Information technology - Telecommunications and information exchangebetween systems - Private Integrated Services Network - Generic functional protocol for the support ofsupplementary services - Inter-exchange signalling procedures and protocol / By International Organizationfor Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO/IEC 18021 2002 Information technology - User interfaces for mobile tools for management ofdatabase communications in a client-server model / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO/IEC 21989 2002 Information technology - Telecommunications and information exchangebetween systems - Private Integrated Service Network - Specification, functional model and informationflows - Short message service / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO/IEC 22092 2002 Information technology - Data interchange on 130 mm magneto-optical diskcartridges - Capacity: 9,1 Gbytes per cartridge / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

INFORMATION TECHNOLOGY ISO ISO/IEC 10192-1 2002 Information technology - Home electronic system (HES) interfaces - P.1:

Universal interface (UI) Class 1 / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO/IEC 10589 2002 Information technology - Telecommunications and information exchangebetween systems - Intermediate System to Intermediate System intra-domain routeing information exchangeprotocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO8473) / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO/IEC 11801 2002 Information technology - Generic cabing for customer premises / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO/IEC 13249-1 2002 Information technology - Database languages - SQL multimedia andapplication packages - P.1: Framework / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO/IEC 13249-6 2002 Information technology - Database languages - SQL multimedia andapplication packages - P.6: Data mining / By International Organization for Standardization (ISO). Geneva:ISO, 2002.


ISO/IEC 14143-2 2002 Information technology - Software measurement - Functional size measurement- P.2: Conformity evaluation of software size measurement methods of ISO/IEC 14143-1 1998 / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 14776-112 2002 Information technology - Small computer system interface (SCSI) - P.112:Parallel interface-2 (SPI-2) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO/IEC 14776-326 2002 Information technology - Small computer system interface (SCSI) - P.326:Reduced block commands (RBC) / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO/IEC 14776-331 2002 Information technology - Small computer system interface (SCSI) - P.331:Stream commands (SSC) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15288 2002 Systems engineering - System life cycle processes / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15444-4 2002 Information technology - JPEG 2000 image coding system - P.4: Conformancetesting / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15474-1 2002 Information technology - CDIF framework - P.1: Overview / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15474-2 2002 Information technology - CDIF framework - P.2: Modelling and extensibility /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15475-1 2002 Information technology - CDIF transfer format - P.1: General rules for syntaxesand encodings / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15475-2 2002 Information technology - CDIF transfer format - P.2: Syntax SYNTAX.1 / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15475-3 2002 Information technology - CDIF transfer format - P.3: Encoding ENCODING.1/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15476-2 2002 Information technology - CDIF semantic metamodel - P.2: Common / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15746-1 2002 Information technology - CDIF semantic metamodel - P.1: Foundation / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15939 2002 Software engineering - Software measurement process / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15945 2002 Information technology - Security techniques - Specification of TTP services tosupport the application of digital signatures / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO/IEC 15946-1 2002 Information technology - Security techniques - Cryptographic techniques basedon elliptic curves - P.1: General / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO/IEC 15946-2 2002 Information technology - Security techniques - Cryptographic techniques basedon elliptic curves - P.2: Digital signatures / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO/IEC 15946-3 2002 Information technology - Security techniques -Cryptographic techniques basedon elliptic curves - P.3: Key establishment / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO/IEC 20968 2002 Software engineering - Mk II Function Point Analysis - Counting PracticesManual / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO/IEC 8348 2002 Information technology - Open Systems Interconnection - Network servicedefinition / By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

ISO/IEC 9796-2 2002 Information technology - Security techniques - Digital signature schemes givingmessage recovery - P.2: Integer factorization based mechanisms / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO/IEC 9995-7 2002 Information technology - Keyboard layouts for text and office systems - P.7:Symbols used to represent functions / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO/IEC TR 15947 2002 Information technology - Security techniques - IT intrusion detectionframework / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

INTEGRATED CIRCUITS IEC IEC 61967-1 2002 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz -

P.1: General conditions and definitions / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC/PAS 62307 2002 Test method for the measurement of moisture diffusivity and water solubility inorganic materials used in integrated circuits / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.

IEC 61967-6 2002 Integrated circuits - Measurement of electromagnetic emissions, 150kHz to 1 Ghz -P. 6: Measurement of conducted emissions - Magnetic probe method / By International ElectrotechnicalCommission (IEC). Geneva: IEC; 2002.

INTERFACES (DATA PROCESSING) ISO ISO 14915-1 2002 Software ergonomics for multimedia user interfaces - P.1: Design principles and

framework / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14915-3 2002 Software ergonomics for multimedia user interfaces - P.3: Media selection and

combination / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 9409-2 2002 Manipulating industrial robots - Mechanical interfaces - P.2: Shafts / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO/IEC 14776-112 2002 Information technology - Small computer system interface (SCSI) - P.112:

Parallel interface-2 (SPI-2) / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 14776-113 2002 Information technology - Small computer system interface (SCSI) - P.113:

Parallel interface-3 (SPI-3) / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 14776-326 2002 Information technology - Small computer system interface (SCSI) - P.326:

Reduced block commands (RBC) / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO/IEC 14776-331 2002 Information technology - Small computer system interface (SCSI) - P.331:Stream commands (SSC) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15938-4 2002 Information technology - Multimedia content description interface - P.4: Audio/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO/IEC 18021 2002 Information technology - User interfaces for mobile tools for management ofdatabase communications in a client-server model / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

INTERNAL COMBUSTION ENGINES ISO ISO 15550 2002 Internal combustion engines - Determination and method for the measurement of

engine power - General requirements / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 3046-1 2002 Reciprocating internal combustion engines - Performance - P.1: Declarations ofpower, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines forgeneral use / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 8178-10 2002 Reciprocating internal combustion engines - Exhaust emission measurement - P.10:Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compressionignition engines operating under transient conditions / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

IRON ORES ISO ISO 3082 2000 Iron ores - Sampling and sample preparation procedures / By International

Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2000. ISO 3085 2002 Iron ores - Experimental methods for checking the precision of sampling, sample

preparation and measurement / By International Organization for Standardization (ISO). 4th ed. - - Geneva:ISO, 2002.

ISO 11323 2002 Iron ore and direct reduced iron - Vocabulary / By International Organization forStandardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

JSA JIS M8720 2001 Iron ores - Determination of low-temperature reduction-disintegration / By Japanese

Standards Association (JSA) and Japan Iron and Steel Federation (JISF). Tokyo: JSA, 2001.

KNITTING MACHINERY ISO ISO 8640-3 2002 Textile machinery and accessories - Flat warp knitting machines - P.3: Vocabulary of

patterning devices / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

LAMP CAPS IEC IEC 60061-1-4 2002 Lamp caps and holders together with gauges for the control of interchangeability

and safety - P.1: Lamp caps - P.2: Lampholders - P.3: Gauges - P.4: Guidelines and general information / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60399 2002 Standard sheets for barrel thread for E14 and E27 Lampholders with shade holder ring/ By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60400 2002 Lampholders for tubular fluorescent lamps and starterholders / By InternationalElectrotechnical Commission (IEC). 6th ed. - - Geneva: IEC, 2002.


LAWN-MOWERS IEC IEC 60335-2-77 2002 Household and similar electrical appliances - Safety - P.2-77: Particular

requirements for pedestrian controlled mains-operated lawnmowers / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

LEAD-ACID BATTERIES IEC IEC 61056-1 2002 General purpose lead-acid batteries (valve-regulated types) - P.1: General

requirements, functional characteristics - Methods of test / By International Electrotechnical Commission(IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61056-2 2002 General purpose lead-acid batteries (valve-regulated types) - P.2: Dimensions,terminals and marking / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC,2002.

LEATHER ISO ISO 2417 2002 Leather - Physical and mechanical tests - Determination of the static absorption of

water / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 2418 2002 Leather - Chemical, physical and mechanical and fastness tests - Sampling location /

By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 2419 2002 Leather - Physical and mechanical tests - Sample preparation and conditioning / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 2420 2002 Leather - Physical and mechanical tests - Determination of apparent density / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 2589 2002 Leather - Physical and mechanical tests - Determination of thickness / By International

Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 3376 2002 Leather - Physical and mechanical tests - Determination of tensile strength and

percentage extension / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO,2002.

ISO 3377-1 2002 Leather - Physical and mechanical tests - Determination of tear load - P.1: Singleedge tear / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 3377-2 2002 Leather - Physical and mechanical tests - Determination of tear load - P.2: Doubleedge tear / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 3378 2002 Leather - Physical and mechanical tests - Determination of resistance to grain crackingand grain crack index / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO,2002.

ISO 3380 2002 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to100 degrees C / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 5402 2002 Leather - Physical and mechanical tests - Determination of flex resistance byflexometer method / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 5403 2002 Leather - Physical and mechanical tests - Determination of water resistance of flexibleleather / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO 5404 2002 Leather - Physical and mechanical tests - Determination of the water resistance ofheavy leathers / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14268 2002 Leather - Physical and mechanical tests - Determination of water vapour permeability/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17186 2002 Leather - Physical and mechanical tests - Determination of surface coating thickness /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17227 2002 Leather - Physical and mechanical tests - Determination of dry heat resistance ofleather / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17229 2002 Leather - Physical and mechanical tests - Determination of water vapour absorption /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17233 2002 Leather - Physical and mechanical tests - Determination of cold crack temperature ofsurface coatings / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17235 2002 Leather - Physical and mechanical tests - Determination of softness / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17236 2002 Leather - Physical and mechanical tests - Determination of extension set / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

LIBRARY AND INFORMATION SCIENCE CSBTS GB/T 5795 2002 China standard book numbering / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 9999 2001 China Standard Serial Numbering / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2001.

LIGHTING SYSTEMS IEC IEC 61822 2002 Electrical installations for lighting and beaconing of aerodromes - Constant current

regulators / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC/TS 62143 2002 Electrical installations for lighting and beaconing of aerodromes - Aeronautical

ground lighting systems - Guidelines for the development of a safety lifecycle methodology / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

LIGHTNING PROTECTION IEC IEC/TR 61400-24 2002 Wind turbine generator systems - P.24: Lighting protection / By International


LIME ASTM ASTM 04.01 2002 Cement; lime; gypsum / By American Society for Testing and Materials (ASTM).

West Conshohocken : ASTM, 2002. SABS


SABS 523 2002 Limes for use in building / By South African Bureau of Standards (SABS). 2.1 ed. - -Pretoria: SABS, 2002.

LIQUEFIED PETROLEUM GAS DSM MS 1535 P.1 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.1:

Specification / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.2 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.2:

General construction / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.3 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.3: Test

methods / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. MS 1535 P.4 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.4:

Glossar / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002.

LOW-ALLOY STEELS JSA JIS Z3201 2001 Gas welding rods for mild steel / By Japanese Standards Association (JSA). Tokyo:

JSA, 2001. JIS Z3316 2001 TIG welding rods and solid wires for mild steel and low alloy steel / By Japanese

Standards Association (JSA). Tokyo: JSA, 2001.

LUBRICATING OILS BSI BS 2000-19 2002 Methods of test for petroleum and its products - BS 2000-19: Determination of

demulsibility characteristics of lubricating oil / By British Standards Institution (BSI). London: BSI, 2002.

MACHINE TOOLS - VIBRATION ISO ISO 13373-1 2002 Condition monitoring and diagnostics of machines - Vibration condition monitoring

- P.1: General procedures / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

MAGNETIC CORES IEC IEC 61246 2002 Magnetic oxide cores (E-cores) of rectangular cross-section and associated parts -

Dimensions / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

MAGNETIC MATERIALS IEC IEC 60404-14 2002 Magnetic materials - P.14: Methods of measurement of the magnetic dipole

moment of a ferromagnetic material specimen by the withdrawal or rotation method / By InternationalElectrotechnical Commission (IEC). Geneva: IEC; 2002.


MECHANICAL MEASUREMENT ISO ISO 7475 2002 Mechanical vibration - Balancing machines - Enclosures and other protective measures


MECHANICAL TESTING CSBTS GB/T 12160 2002 Calibration of extensometers used in uniaxial testing / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 228 2002 Metallic materials - Tensile testing at ambient temperature / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60749-1 2002 Semiconductor devices - Mechanical and climatic test methods - P.1: General / By

International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60749-22 2002 Semiconductor devices - Mechanical and climatic test methods - P.22: Bond

strength / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60749-31 2002 Semiconductor devices - Mechanical and climatic test methods - P.31:

Flammability of plastic-encapsulated devices (internally induced) / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 60749-32 2002 Semiconductor devices - Mechanical and climatic test methods - P.32:Flammability of plastic-encapsulated devices (externally induced) / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 60749-8 2002 Semiconductor devices - Mechanical and climatic test methods - P.8: Sealing / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

ISO ISO 14577-1 2002 Metallic materials - Instrumented indentation test for hardness and materials

parameters - P.1: Test method / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 14577-2 2002 Metallic materials - Instrumented indentation test for hardness and materialsparameters - P.2: Verification and calibration of testing machines / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 14577-3 2002 Metallic materials - Instrumented indentation test for hardness and materialsparameters - P.3: Calibration of reference blocks / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 17235 2002 Leather - Physical and mechanical tests - Determination of softness / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17236 2002 Leather - Physical and mechanical tests - Determination of extension set / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 6601 2002 Plastics - Friction and wear by sliding - Identification of test parameters / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.


MEDICAL EQUIPMENT ISO ISO 7439 2002 Copper-bearing intra-uterine contraceptive devices - Requirements, tests / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 10651-4 2002 Lung ventilators - P.4: Particular requirements for operator-powered resuscitators /

By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10993-4 2002 Biological evaluation of medical devices - P.4: Selection of tests for interactions

with blood / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 10993-17 2002 Biological evaluation of medical devices - P.17: Establishment of allowable limits

for leachable substances / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 11193-1 2002 Single-use medical examination gloves - P.1: Specification for gloves made from

rubber latex or rubber solution / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 15193 2002 In vitro diagnostic medical devices - Measurement of quantities in samples ofbiological origin - Presentation of reference measurement procedures / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 15194 2002 In vitro diagnostic medical devices - Measurement of quantities in samples ofbiological origin - Description of reference materials / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

ISO 19001 2002 In vitro diagnostic medical devices - Information supplied by the manufacturer with invitro diagnostic reagents for staining in biology / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO/TS 20225 2001 Global medical device nomenclature for the purpose of regulatory data exchange /By International Organization for Standardization (ISO). Geneva: ISO, 2001.

ISO 21534 2002 Non-active surgical implants - Joint replacement implants - Particular requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 21535 2002 Non-active surgical implants - Joint replacement implants - Specific requirements forhip-joint replacement implants / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 21536 2002 Non-active surgical implants - Joint replacement implants - Specific requirements forknee-joint replacement implants / By International Organization for Standardization (ISO). Geneva: ISO,2002.

METAL COATINGS ASTM ASTM 02.05 2002 Metallic and inorganic coatings; metal powders, sintered P/M structural parts / By

American Society for Testing and Materials (ASTM). West Conshohocken : ASTM, 2002. ISO ISO 1458 2002 Metallic coatings - Electrodeposited coatings of nickel / By International Organization

for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.


METAMODEL ISO ISO/IEC 15476-2 2002 Information technology - CDIF semantic metamodel - P.2: Common / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 15746-1 2002 Information technology - CDIF semantic metamodel - P.1: Foundation / By


MICROBIOLOGY ISO ISO 6579 2002 Microbiology of food and animal feeding stuffs - Horizontal method for the detection

of Salmonella spp. / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.

MOTION-PICTURE FILM ISO ISO 17266 2002 Cinematography - Multichannel analogue and digital photographic sound and control

records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 2906 2002 Cinematography - Image area produced by camera aperture on 35 mm motion-picturefilm - Position and dimensions / By International Organization for Standardization (ISO). 3rd ed. - -Geneva: ISO, 2002.

ISO 8567 2002 Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mmmotion-picture release prints - Position and dimensions / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.

MOTOR VEHICLES DSM MS 595 P.1 2002 Safety glass for motor vehicles - P.1: General requirements / By Department of

Standards Malaysia (DSM). 2nd ed. - - Selangor D.E.: DSM, 2002. ISO ISO 6597 2002 Road vehicles - Motor vehicles with hydraulic braking systems with and without

antilock device - Measurement of braking performance / By International Organization for Standardization(ISO). 3rd ed. - - Geneva: ISO, 2002.

SABS SABS 1080 2002 Restraining devices (safety belts) for occupants of adult build in motor vehicles

(Revised requirements) (Incorporating EEC Directive 77/541 "Safety belts and restraint systems of motorvehicles", and the amending EEC Directives 81/576 and 82/319, with modifications) / By South AfricanBureau of Standards (SABS). Pretoria: SABS 2002.

MULTICORE CABLES IEC IEC 61156-1 2002 Multicore and symmetrical pair/quad cables for digital communications - P.1:

General specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


IEC 61156-5 2002 Multicore and symmetrical pair/quad cables for digital communications - P.5:Symmetrical pair/quad cables with transmission characteristics up to 600 MHz- Horizontal floor, wiring -Sectional specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61156-6 2002 Multicore and symmetrical pair/quad cables for digital communications - P.6:Symmetrical pair/quad cables with transmission characteristics up to 600 MHz- Work area wiring - Sectionalspecification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

NATURAL GAS ISO ISO 10416 2002 Petroleum and natural gas industries - Drilling fluids - Laboratory testing / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 13625 2002 Petroleum and natural gas industries - Drilling and production equipment - Marine

drilling riser couplings / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 16812 2002 Petroleum and natural gas industries - Shell-and-tube heat exchangers / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 19900 2002 Petroleum and natural gas industries - General requirements for offshore structures /

By International Organization for Standardization (ISO). Geneva: ISO, 2002.

NETWORK LAYER (OSI) ISO ISO/IEC 8348 2002 Information technology - Open Systems Interconnection - Network service

definition / By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002. ISO/IEC 10589 2002 Information technology - Telecommunications and information exchange


NON-DESTRUCTIVE TESTING ISO ISO 15708-2 2002 Non-destructive testing - Radiation methods - Computed tomography - P.2:

Examination practices / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 9934-2 2002 Non-destructive testing - Magnetic particle testing - P.2: Detection media / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 9934-3 2002 Non-destructive testing - Magnetic particle testing - P.3: Equipment / By


OFFSHORE CONSTRUCTION WORKS ISO ISO 13628-5 2002 Petroleum and natural gas industries - Design and operation of subsea production

systems - P.5: Subsea umbilicals / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 19900 2002 Petroleum and natural gas industries - General requirements for offshore structures /By International Organization for Standardization (ISO). Geneva: ISO, 2002.


OPTICAL COMMUNICATION SYSTEMS IEC IEC 61280-2-9 2002 Fibre optic communication subsystem test procedures - P.2-9: Digital systems -

Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC/TR 61282-3 2002 Fibre optic communication system design guides - P.3: Calculation ofpolarization mode dispersion / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

OPTICAL DISKS ISO ISO 18925 2002 Imaging materials - Optical disc media - Storage practices / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO/IEC 22092 2002 Information technology - Data interchange on 130 mm magneto-optical disk

cartridges - Capacity: 9,1 Gbytes per cartridge / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

OPTICAL FIBRES IEC IEC 60793-2-10 2002 Optical fibres - P.2-10: Product specifications - Sectional specification for

category A1 multimode fibres / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC/TR 62245 2002 Optical fibres - Measurement methods - Bend loss for A3 and A4 type fibres / By


OPTICAL INSTRUMENTS IEC IEC 61291-5-2 2002 Optical amplifiers - P.5-2: Qulaification specifications - c qualification for optical

fibre amplifiers / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61947-1 2002 Electronic projection - Measurement and documentation of key performance cirteria

- P.1: Fixed resolution projection / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

ISO ISO 9022-2 2002 Optics and optical instruments - Environmental test methods - P.2: Cold, heat and

humidity / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 9022-4 2002 Optics and optical instruments - Environmental test methods - P.4: Salt mist / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 10109-4 2002 Optics and optical instruments - Environmental requirements - P.4: Test

requirements for telescopic systems / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 14132-1 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.1: Generalterms and alphabetical indexes of terms in ISO 14132 / By International Organization for Standardization(ISO). Geneva: ISO, 2002.


ISO 14132-2 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.2: Terms forbinoculars, monoculars and spotting scopes / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 14132-3 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.3: Terms fortelescopic sights / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14132-4 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.4: Terms forastronomical telescopes / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15795 2002 Optics and optical instruments - Quality evaluation of optical systems - Assessing theimage quality degradation due to chromatic aberrations / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

ISO 17123-1 2002 Optics and optical instruments - Field procedures for testing geodetic and surveyinginstruments - P.1: Theory / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

OPTICS ISO ISO 14132-1 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.1: General

terms and alphabetical indexes of terms in ISO 14132 / By International Organization for Standardization(ISO). Geneva: ISO, 2002.




OVERHEAD POWER LINES CSBTS GB/T 2338 2002 Requirements and tests for overhead line spacers / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 61952 2002 Insulators for overhead lines - Composite line post insulators for alternative insulators

for alternative current with a nominal voltage > 1 000 V / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

IEC 60652 2002 Loading tests on overhead line structures / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC; 2002.

PACKAGING DSM MS 1513 P.1 Sub-P.1 2002 Packaging - Transport of dangerous goods - P.1: General provision,





ISO ISO 15750-3 2002 Packaging - Steel drums - P.3: Inserted flange-type closure systems / By


PAINT EXTENDERS ISO ISO 787-13 2002 General methods of test for pigments and extenders - P.13: Determination of water-

soluble sulfates, chlorides and nitrates / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO 787-14 2002 General methods of test for pigments and extenders - P.14: Determination ofresistivity of aqueous extract / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2002.

ISO 787-17 2002 General methods of test for pigments and extenders - P.17: Comparison of lighteningpower of white pigments / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2002.

PAINTS ISO ISO 4624 2002 Paints and varnishes - Pull-off test for adhesion / By International Organization for

Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 6272-1 2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - P.1: Falling-



ISO 787-13 2002 General methods of test for pigments and extenders - P.13: Determination of water-soluble sulfates, chlorides and nitrates / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.


PALLETS ISO ISO 12777-3 2002 Methods of test for pallet joints - P.3: Determination of strength of pallet joints / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15629 2002 Pallets for materials handling - Quality of fasteners for assembly of new and repair of

used, flat, wooden pallets / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PAPER ISO ISO 12192 2002 Paper and board - Compressive strength - Ring crush method / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 186 2002 Paper and board - Sampling to determine average qualit / By International Organization

for Standardization (ISO). 4th ed. - - Geneva: ISO, 2002.


ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades andconverted products / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paperand board / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PAPER PRODUCTS ISO ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades and

converted products / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PAPER PULP ISO ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-2 2002 Paper, board, pulps and related terms - Vocabulary - P.2: Pulping terminology / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper

and board / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 5264-2 2002 Pulps - Laboratory beating - P.2: PFI mill method / By International Organization for


PETROLEUM ISO ISO 10416 2002 Petroleum and natural gas industries - Drilling fluids - Laboratory testing / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10442 2002 Petroleum, chemical and gas service industries - Packaged, integrally geared

centrifugal air compressors / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 13625 2002 Petroleum and natural gas industries - Drilling and production equipment - Marine

drilling riser couplings / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 13628-5 2002 Petroleum and natural gas industries - Design and operation of subsea production

systems - P.5: Subsea umbilicals / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 13703 2000 Petroleum and natural gas industries - Design and installation of piping systems onoffshore production platforms / By International Organization for Standardization (ISO). Geneva: ISO,2000.

ISO 16812 2002 Petroleum and natural gas industries - Shell-and-tube heat exchangers / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 19900 2002 Petroleum and natural gas industries - General requirements for offshore structures /By International Organization for Standardization (ISO). Geneva: ISO, 2002.


PETROLEUM PRODUCTS CSBTS GB/T 4945 2002 Standard test method for acid and base number of petroleum products and lubricants

by Colour-indicator titration / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.

ISO ISO 2719 2002 Determination of flash point - Pensky - Martens closed cup method / By International

Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002. ISO 4266-1 2002 Petroleum and liquid petroleum products - Measurement of level and temperature in

storage tanks by automatic methods - P.1: Measurement of level in atmospheric tanks / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4266-2 2002 Petroleum and liquid petroleum products - Measurement of level and temperature instorage tanks by automatic methods - P.2: Measurement of level in marine vessels / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4266-3 2002 Petroleum and liquid petroleum products - Measurement of level and temperature instorage tanks by automatic methods - P.3: Measurement of level in pressurized storage tanks (non-refrigerated) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4266-4 2002 Petroleum and liquid petroleum products - Measurement of level and temperature instorage tanks by automatic methods - P.4: Measurement of temperature in atmospheric tanks / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4266-5 2002 Petroleum and liquid petroleum products - Measurement of level and temperature instorage tanks by automatic methods - P.5: Measurement of temperature in marine vessels / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4266-6 2002 Petroleum and liquid petroleum products - Measurement of level and temperature instorage tanks by automatic methods - P.6: Measurement of temperature in pressurized storage tanks (non-refrigerated) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15380 2002 Lubricants, industrial oils and related products (class L) - Family H (Hydraulicsystems) - Specifications for categories HETG, HEPG, HEES and HEPR / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

PHOTOGRAPHIC CHEMICALS ISO ISO 10349-13 2002 Photography - Photographic-grade chemicals - Test methods - P.13: Determination

of pH / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10349-8 2002 Photography - Photographic-grade chemicals - Test methods - P.8: Determination of

volatile matter / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 18928 2002 Imaging materials - Unprocessed photographic films and papers - Storage practices /


PHOTOGRAPHIC FILM ISO ISO 18901 2002 Imaging materials - Processed silver-gelatin type black-and-white films -

Specifications for stability / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO 18903 2002 Imaging materials - Films and paper - Determination of dimensional change / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 18905 2002 Imaging materials - Ammonia-processed diazo photographic film - Specifications forstability / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 18912 2002 Imaging materials - Processed vesicular photographic film - Specifications for stabilit/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PIGMENTS ASTM ASTM 06.03 2002 Paint-pigments, drying oils, polymers, resins, naval stores, cellulosic esters, and ink

vehicles / By American Society for Testing and Materials (ASTM). West Conshohocken: ASTM, 2002. ISO ISO 787-13 2002 General methods of test for pigments and extenders - P.13: Determination of water-

soluble sulfates, chlorides and nitrates / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.


ISO 787-17 2002 General methods of test for pigments and extenders - P.17: Comparison of lighteningpower of white pigments / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2002.

PIPE COUPLINGS ISO ISO 6162-2 2002 Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and

metric or inch screws - P.2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar),DN 13 to DN 51 / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PIPE FITTINGS ISO ISO 18553 2002 Method for the assessment of the degree of pigment or carbon black dispersion in

polyolefin pipes, fittings and compounds / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 7432 2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods toprove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PIPES ISO ISO 18553 2002 Method for the assessment of the degree of pigment or carbon black dispersion in

polyolefin pipes, fittings and compounds / By International Organization for Standardization (ISO). Geneva:ISO, 2002.


ISO 7432 2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods toprove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PLASTICS ISO ISO 6402-1 2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-

diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusionmaterials - P.1: Designation system and basis for specifications / By International Organization forStandardization (ISO). 4th ed. - - Geneva: ISO, 2002.

ISO 10366-1 2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) mouldingand extrusion materials - P.1: Designation system and basis for specifications / By International Organizationfor Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 11359-3 2002 Plastics - Thermomechanical analysis (TMA) - P.3: Determination of penetrationtemperature / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15791-1 2002 Plastics - Development and use of intermediate-scale fire tests for plastics products -P.1: General guidance / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 16929 2002 Plastics - Determination of the degree of disintegration of plastic materials underdefined composting conditions in a pilot-scale test / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 17281 2002 Plastics - Determination of fracture toughness (Gicand Kic) at moderately high loadingrates (1 m/s) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17422 2002 Plastics - Environmental aspects - General guidelines for their inclusion in standards /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PORTLAND CEMENT SLSI SLS 107 P.1 2002 Ordinary portland cement - P.1: Requirements / By Sri Lanka Standards Institution

(SLSI). 3rd ed. - - Colombo: SLSI, 2002. SLS 107 P.2 2002 Ordinary portland cement - P.2: Test methods / By Sri Lanka Standards Institution

(SLSI). 3rd ed. - - Colombo: SLSI, 2002.

POWDER METALLURGY CSBTS GB/T 10418 2002 Steel bonded tungsten carbides - Determination of transverse rupture strength / By

China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 10419 2002 Steel bonded tungsten carbides - Determination of impact toughness / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 10420 2002 Steel bonded tungsten carbides - Determination of Rockwell hardness (scale C and

A) / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 10421 2002 Sintered metal friction materials - Determination of density / By China State Bureau

of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 10422 2002 Sintered metal friction materials - Determination of transverse rupture strength / By

China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.


GB/T 10423 2002 Sintered metal friction materials - Determination of tensile strength / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

GB/T 10424 2002 Sintered metal friction materials - Determination of compressive strength / ByChina State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

GB/T 10425 2002 Sintered metal friction materials - Determination of apparent hardness / By ChinaState Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

GB/T 4164 2002 Metallic powders - Determination of hydrogen-reducible oxygen content / By ChinaState Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

GB/T 9096 2002 Sintered metal materials, excluding hardmetals - Impact test method / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

GB/T 9097.1 2002 Sintered metal materials, excluding hardmetals - Determination of apparenthardness - P.1: Materials of essentially uniform section hardness / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2002.

POWER MEASUREMENT (ELECTRIC) IEC IEC 62087 2002 Methods of measurement for the power consumption of audio, video and related

equipment / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

PRESSURE CONTROL ISO ISO 4266-3 2002 Petroleum and liquid petroleum products - Measurement of level and temperature in

storage tanks by automatic methods - P.3: Measurement of level in pressurized storage tanks (non-refrigerated) / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

PRINTED-CIRCUIT BOARDS IEC IEC 61188-5-1 2002 Printed boards and printed board assemblies - Design and use - P.5-1: Attachment

(land/joint) considerations - Generic requirements / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 61249-2-7 2002 Materials for printed boards and other interconnecting structures - P.2-7:Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability(vertical burning test), copper-clad / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 62326-1 2002 Printed boards - P.1: Generic specification / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

PROCESS CONTROL IEC IEC/PAS 61499-4 2002 Function blocks for industrial-process measurement and control systems - P.4:

Rules for compliance profiles / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC/PAS 61804-1 2002 Function blocks (FB) for process control - P.1: Overview of system aspects /

By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


IEC/PAS 61804-2 2002 Function blocks (FB) for process control - P.2: Specification of FB concept andElectronic Device Description Language (EDDL) / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

PROTECTIVE SUITS ISO ISO 15027-1 2002 Immersion suits - P.1: Constant wear suits, requirements including safety / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15027-2 2002 Immersion suits - P.2: Abandonment suits, requirements including safety / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15027-3 2002 Immersion suits - P.3: Test methods / By International Organization for


PROTOCOL IEC IEC 61883-6 2002 Consumer audio/video equipment - Digital interface - P.6: Audio and music data

transmission protocol / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. ISO ISO/IEC 9594-5 1998 Information technology - Open systems interconnection - The Directory: Protocol

specifications / By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 1998. ISO/IEC 10589 2002 Information technology - Telecommunications and information exchange



ISO/IEC 14776-326 2002 Information technology - Small computer system interface (SCSI) - P.326:Reduced block commands (RBC) / By International Organization for Standardization (ISO). Geneva: ISO,2002.

PUMPS CSBTS GB/T 2816 2002 Submersible pumps for deep well / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 2818 2002 Submersible motor for deep well / By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 15783 2002 Seal-less rotodynamic pumps - Class II - Specification / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 5199 2002 Technical specifications for centrifugal pumps - Class II / By International



RAILWAY ENGINEERING IEC IEC 60494-2 2002 Railway applications - Rolling stock - Pantographs - Characteristics and tests - P.2:

Pantographs for metros and light rail vehicles / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 62278 2002 Railway applications - Specification and demonstration of reliability availability,maintainability and safety (RAMS) / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 62280-1 2002 Railway applications - Communication, signalling and processing systems - P.1:Safety-related communication in closed transmission systems / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 62280-2 2002 Railway applications - Communication, signalling and processing systems - P.2:Safety-related communication in open transmission systems / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

RECORDING SYSTEMS IEC IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-

broadcasting / By International Electrotechnical Commission (IEC). Geneva: IEC 2002. ISO ISO/IEC 7811-1 2002 Identification cards - Recording technique - P.1: Embossing / By International

Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

REFRACTORIES ASTM ASTM 15.01 2002 Refractories; activated carbon, advanced ceramics / By American Society for

Testing and Materials (ASTM). West Conshohocken : ASTM, 2002.

ROAD VEHICLE COMPONENTS ISO ISO 11452-5 2002 Road vehicles - Component test methods for electrical disturbances from

narrowband radiated electromagnetic energy - P.5: Stripline / By International Organization forStandardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

DSM MS 1538 2002 Speed monitoring device for road vehicles / By Department of Standards Malaysia

(DSM). Selangor D.E.: DSM, 2002.

ROAD VEHICLES IEC IEC 60349-2 2002 Electric traction - Rotating electrical machines for rail and road vehicles - P.2:

Electronic convertor-fed alternating current motors / By International Electrotechnical Commission (IEC).2nd ed. - - Geneva: IEC, 2002.

ISO ISO 3808 2002 Road vehicles - Unscreened high-voltage ignition cables - General specifications, test

methods and requirements / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


ISO 7637-1 2002 Road vehicles - Electrical disturbances from conduction and coupling - P.1:Definitions and general considerations / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO 8092-2 2000 Road vehicles - Connections for on-board electrical wiring harnesses - P.2:Definitions, test methods and general performance requirements / By International Organization forStandardization (ISO). 3rd ed. - - Geneva: ISO, 2000.

ISO 8714 2002 Electric road vehicles - Reference energy consumption and range - Test procedures forpassenger cars and light commercial vehicles / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 8820-3 2002 Road vehicles - Fuse-links - P.3: Fuse-links with tabs (blade type) / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 8820-4 2002 Road vehicles - Fuse-links - P.4: Fuse-links with female contacts (type A) and bolt-incontacts (type B) and their test fixtures / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 11096 2002 Road vehicles - Pedestrian protection - Impact test method for predestrian thigh, legand knee / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 12214 2002 Road vehicles - Direction-of-motion stereotypes for automotive hand controls / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 12353-1 2002 Road vehicles - Traffic accident analysis - P.1: Vocabulary / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15007-1 2002 Road vehicles - Measurement of driver visual behavior with respect to transportinformation and control systems - P.1: Definitions and parameters / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 15500-14 2002 Road vehicles - Compressed natural gas (CNG) fuel system components - P.14:Excess flow valve / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 22628 2002 Road vehicles - Recyclability and recoverability - Calculation method / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/TS 11155-2 2002 Road vehicles - Air filters for passenger compartments - P.2: Test for gaseousfiltration / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/TS 20119 2002 Road vehicles - Test method for the quantification of on-centre handling -Determination of dispersion metrics for straight-line driving / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ROCKWELL HARDNESS MEASUREMENT CSBTS GB/T 10420 2002 Steel bonded tungsten carbides - Determination of Rockwell hardness (scale C and

A) / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

ROTATING ELECTRIC MACHINES IEC IEC 60034-8 2002 Rotating electrical machines - P.8: Terminal markings and direction of rotation / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC 60349-2 2002 Electric traction - Rotating electrical machines for rail and road vehicles - P.2:

Electronic convertor-fed alternating current motors / By International Electrotechnical Commission (IEC).2nd ed. - - Geneva: IEC, 2002.

IEC/TS 60034-20-1 2002 Rotating electrical machines - P.20-1: Control motors - Stepping motors / ByInternational Electrotechnical Commission (IEC). Geneva: IEC; 2002.


ROTATING GENERATORS CSBTS GB/T 7064 2002 Requirements for turbine type synchronous machine / By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

RUBBER ISO ISO 1382 2002 Rubber - Vocabulary / By International Organization for Standardization (ISO). 4th

ed. - - Geneva: ISO; 2002. ISO 4649 2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a

rotating cylindrical drum device / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO 16565 2002 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene (EPDM) terpolymers / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

SAFETY GLASS DSM MS 595 P.1 2002 Safety glass for motor vehicles - P.1: General requirements / By Department of

Standards Malaysia (DSM). 2nd ed. - - Selangor D.E.: DSM, 2002.

SAFETY HARNESSES SABS SABS 1080 2002 Restraining devices (safety belts) for occupants of adult build in motor vehicles

(Revised requirements) (Incorporating EEC Directive 77/541 "Safety belts and restraint systems of motorvehicles", and the amending EEC Directives 81/576 and 82/319, with modifications) / By South AfricanBureau of Standards (SABS). Pretoria: SABS 2002.

SAFETY MEASURES IEC IEC 60335-2-13 2002 Household and similar electrical appliances - Safety - P.2-13: Particular

requirements for deep fat fryers, frying pans and similar appliances / By International ElectrotechnicalCommission (IEC). 5th ed. - - Geneva: IEC, 2002.

IEC 60335-2-14 2002 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.

IEC 60335-2-21 2002 Household and similar electrical appliances - Safety - P.2-21: Particularrequirements for storage water heaters / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.

IEC 60335-2-28 2002 Household and similar electrical appliances - Safety - P.2-28: Particularrequirements for sewing machines / By International Electrotechnical Commission (IEC). 4th ed. - -Geneva: IEC, 2002.


IEC 60335-2-35 2002 Household and similar electrical appliances - Safety - P.2-35: Particularrequirements for instantaneous water heaters / By International Electrotechnical Commission (IEC). 4th ed.- - Geneva: IEC, 2002.

IEC 60335-2-77 2002 Household and similar electrical appliances - Safety - P.2-77: Particularrequirements for pedestrian controlled mains-operated lawnmowers / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 62040-1-1 2002 Uninterruptible power systems (UPS) - P.1-1: General and safety requirements forUPS used in operator access areas / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 62040-1-2 2002 Uninterruptible power systems (UPS) - P.1-2: General and safety requirements forUPS used in restricted access locations / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 62133 2002 Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portableapplications / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

SCREWDRIVER ISO ISO 2351-2 2002 Assembly tools for screws and nuts - Machine-operated screwdriver bits - P.2:

Screwdriver bits for cross-recessed head screws / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

SEALING MATERIALS ISO ISO 11600 2002 Building construction - Jointing products - Classification and requirements for

sealants / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

SEAT BELTS DSM MS 75 2002 Anchorages for seat belts / By Department of Standards Malaysia (DSM). Selangor D.E.:

DSM, 2002.

SEMICONDUCTOR DEVICES IEC IEC 60749-22 2002 Semiconductor devices - Mechanical and climatic test methods - P.22: Bond

strength / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 60749-31 2002 Semiconductor devices - Mechanical and climatic test methods - P.31:

Flammability of plastic-encapsulated devices (internally induced) / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.

IEC 60749-32 2002 Semiconductor devices - Mechanical and climatic test methods - P.32:Flammability of plastic-encapsulated devices (externally induced) / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.


IEC/PAS 62336 2002 Accelerated moisture resistance - Unbiased HAST / By InternationalElectrotechnical Commission (IEC) and JEDEC Solid State Technology Association (JEDEC). Geneva: IEC,2002.

SHEET MATERIALS ASTM ASTM 01.03 2002 Steel-plate, sheet, strip, wire; stainless steel bar / By American Society for Testing

and Materials (ASTM). West Conshohocken : ASTM, 2002. ISO ISO 9444 2002 Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on


ISO 9445 2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cutlengths - Tolerances on dimensions and form / By International Organization for Standardization (ISO). 2nded. - - Geneva: ISO, 2002.

SHIPS - FIRE SAFETY ISO ISO 17631 2002 Ships and marine technology - Shipboard plans for fire protection, life-saving

appliances and means of escape / By International Organization for Standardization (ISO). Geneva: ISO,2002.

SHORT-CIRCUIT CURRENTS IEC IEC/TR 60909-1 2002 Short-circuit currents in three-phase a.c. systems - P.1: Factors for the

calculation of short-circuit currents according to IEC 60909-0 / By International ElectrotechnicalCommission (IEC). 2nd ed. - - Geneva: IEC, 2002.

SHRINKAGE TESTS ISO ISO 3380 2002 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to

100 degrees C / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

SINTERED PRODUCTS ASTM ASTM 02.05 2002 Metallic and inorganic coatings; metal powders, sintered P/M structural parts / By


SODIUM CARBONATE DSM MS 1551 2002 Soda ash (sodium carbonate) used for potable water supply / By Department of



SOFTWARE TECHNIQUES ISO ISO/IEC 14143-2 2002 Information technology - Software measurement - Functional size measurement

- P.2: Conformity evaluation of software size measurement methods of ISO/IEC 14143-1 1998 / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO/IEC 15939 2002 Software engineering - Software measurement process / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

SOIL TESTING ISO ISO 15473 2002 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals

in soil under anaerobic conditions / By International Organization for Standardization (ISO). Geneva: ISO,2002.

SOILS ISO ISO 10381-1 2002 Soil quality - Sampling - P.1: Guidance on the design of sampling programmes / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10381-2 2002 Soil quality - Sampling - P.2: Guidance on sampling techniques / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14869-2 2002 Soil quality - Dissolution for the determination of total element content - P.2:

Dissolution by alkaline fusion / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 15009 2002 Soil quality - Gas chromatographic determination of the content of volatile aromatichydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermaldesorption / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15176 2002 Soil quality - Characterization of excavated soil and other soil materials intended forre-use / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15473 2002 Soil quality - Guidance on laboratory testing for biodegradation of organic chemicalsin soil under anaerobic conditions / By International Organization for Standardization (ISO). Geneva: ISO,2002.

SOUND BROADCASTING BSI BS EN 55020 2002 Sound and television broadcast receivers and associated equipment - Immunity

characteristics - Limits and methods of measurement / By British Standards Institution (BSI). London: BSI,2002.

SOUND INTENSITY ISO ISO 15186-3 2002 Acoustics - Measurement of sound insulation in buildings and of building elements

using sound intensity - P.3: Laboratory measurements at low frequencies / By International Organization forStandardization (ISO). Geneva: ISO, 2002.


ISO 9614-3 2002 Acoustics - Determination of sound power levels of noise sources using soundintensity - P.3: Precision method for measurement by scanning / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

SPACE SAFETY ISO ISO 14620-1 2002 Space systems - Safety requirements - P.1: System safet / By International


SPACE TECHNOLOGY ISO ISO 14300-2 2002 Space systems - Programme management - P.2: Product assurance / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 14961 2002 Space data and information transfer systems - Parameter value language specification

/ By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 16091 2002 Space systems - Integrated logistic support / By International Organization for


STAINLESS STEELS ISO ISO 9444 2002 Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on


ISO 9445 2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cutlengths - Tolerances on dimensions and form / By International Organization for Standardization (ISO). 2nded. - - Geneva: ISO, 2002.

ISO/TR 17671-3 2002 Welding - Recommendations for welding of metallic materials - P.3: Arcwelding of stainless steels / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

STEAM-ELECTRIC POWER STATIONS IEC IEC/TR 62140-2 2002 Fossil-fired steam power stations - P.2: Drum-level control / By International

Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC/TR 62140-3 2002 Fossil-fired steam power stations - P.3: Steam-temperature control / By


STEEL-WIRE ROPES CSBTS GB/T 352 2002 Locked coil wire ropes / By China State Bureau of Quality and Technical Supervision

(CSBTS). Beijing: CSBTS, 2002. GB/T 12753 2002 Steel wire ropes for conveyer belts / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002.


STEELS CSBTS GB/T 5223 2002 Steel wires for the prestressing of concrete / By China State Bureau of Quality and

Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 15750-3 2002 Packaging - Steel drums - P.3: Inserted flange-type closure systems / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 2639 2002 Steels - Determination and verification of the depth of carburized and hardened cases /

By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002. JSA JIS B1251 2001 Spring lock washers / By Japanese Standards Association (JSA) and Japan Spring

Manufactures Association (JSMA). Tokyo: JSA, 2001. JIS B2220 2001 Steel welding pipe flanges / By Japanese Standards Association (JSA) and Japan Pipe

Fittings Association (JPFA). Tokyo: JSA, 2001.

STORAGE ISO ISO 18928 2002 Imaging materials - Unprocessed photographic films and papers - Storage practices /


STORAGE BATTERIES IEC IEC 60622 2002 Secondary cells and batteries containing alkaline or other non-acid electrolytes -

Sealed nickel-cadmium prismatic rechargeable single cells / By International Electrotechnical Commission(IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 61982-2 2002 Secondary batteries for the propulsion of electric road vehicles - P.2: Dynamicdischarge performance test and dynamic endurance test / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.

IEC 62133 2002 Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portableapplications / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

STRENGTH OF MATERIALS ISO ISO 12777-3 2002 Methods of test for pallet joints - P.3: Determination of strength of pallet joints / By


SURFACE TREATMENT ISO ISO 17233 2002 Leather - Physical and mechanical tests - Determination of cold crack temperature of

surface coatings / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


TABLEWARE SABS SABS 1003 2002 Fine china and vitrified tableware for domestic use / By South African Bureau of

Standards (SABS). 2nd ed. - - Pretoria: SABS, 2002. SABS 1004 2002 Fine china and vitrified tableware for non-domestic use / By South African Bureau of

Standards (SABS). 2nd ed. - - Pretoria: SABS, 2002.

TANKS (CONTAINERS) ISO ISO 4266-1 2002 Petroleum and liquid petroleum products - Measurement of level and temperature in




ISO 4266-4 2002 Petroleum and liquid petroleum products - Measurement of level and temperature instorage tanks by automatic methods - P.4: Measurement of temperature in atmospheric tanks / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

TELESCOPES ISO ISO 14132-1 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.1: General

terms and alphabetical indexes of terms in ISO 14132 / By International Organization for Standardization(ISO). Geneva: ISO, 2002.




TEMPERATURE MEASUREMENT ISO ISO 4266-1 2002 Petroleum and liquid petroleum products - Measurement of level and temperature in





TENSILE STRENGTH CSBTS GB/T 10423 2002 Sintered metal friction materials - Determination of tensile strength / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 3376 2002 Leather - Physical and mechanical tests - Determination of tensile strength and

percentage extension / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO,2002.

TERMINOLOGY ISO ISO 12616 2002 Translation-oriented terminograph / By International Organization for

Standardization (ISO). Geneva: ISO, 2002. ISO 17591 2002 Machinery for forestry - Knuckleboom log loaders - Identification terminology,

classification and component nomenclature / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 17658 2002 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts -Terminology / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 17659 2002 Welding - Multilingual terms for welded joints with illustrations / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4046-2 2002 Paper, board, pulps and related terms - Vocabulary - P.2: Pulping terminology / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4046-3 2002 Paper, board, pulps and related terms - Vocabulary - P.3: Paper-making terminology/ By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 4720 2002 Essential oils - Nomenclature / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 8655-1 2002 Piston-operated volumetric apparatus - P.1: Terminology, general requirements anduser recommendations / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 8811 2000 Earth-moving machinery - Rollers and compactors - Terminology and commercialspecifications / By International Organization for Standardization (ISO). Geneva: ISO, 2000.

ISO 9999 2002 Technical aids for persons with disabilities - Classification and terminology / ByInternational Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

TESTING BSI BS EN 61000-4-3 2002 Electromagnetic compatibility (EMC) - P.4-3: Testing and measurement

techniques - Radiated, radio-frequency, electromagnetic field immunity test / By British StandardsInstitution (BSI). London: BSI, 2002.

CSBTS GB/T 11976 2002 Graduation and test method of daylighting properties for windows / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 4945 2002 Standard test method for acid and base number of petroleum products and lubricants

by Colour-indicator titration / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.


GB/T 5019 2002 Insulating materials based on mica - Methods of test / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

DSM MS 1535 P.3 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.3: Test

methods / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 60352-7 2002 Solderless connections - P.7: Spring clamp connections - General requirements, test

methods and practical guidance / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 61000-4-3 2002 Electromagnetic compatibility (EMC) - P.4-3: Testing and measurement

techniques - Radiated, radio-frequency, electromagnetic field immunity test / By InternationalElectrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 61056-1 2002 General purpose lead-acid batteries (valve-regulated types) - P.1: Generalrequirements, functional characteristics - Methods of test / By International Electrotechnical Commission(IEC). 2nd ed. - - Geneva: IEC, 2002.

IEC 60664-1 2002 Insulation coordination for equipment within low-voltage systems - P.1: Principles,requirements and tests / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002.

ISO ISO 230-6 2002 Test code for machine tools - P.6: Determination of positioning accuracy on body and

face diagonals (Diagonal displacement tests) / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 2639 2002 Steels - Determination and verification of the depth of carburized and hardened cases /By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

ISO 4074 2002 Natural latex rubber condoms - Requirements and test methods / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 10349-1 2002 Photography - Photographic-grade chemicals - Test methods - P.1: General / ByInternational Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 10349-8 2002 Photography - Photographic-grade chemicals - Test methods - P.8: Determination ofvolatile matter / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

ISO 15630-1 2002 Steel for the reinforcement and prestressing of concrete - Test methods - P.1:Reinforcing bars, wire rod and wire / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 15630-3 2002 Steel for the reinforcement and prestressing of concrete - Test methods - P.2:Prestressing steel / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

TEXTILE FINISHING MACHINERY ISO ISO 10457 2002 Textile machinery - Dyeing and finishing machines - Nominal speeds / By

International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

TEXTILE FLOOR COVERINGS ISO ISO 9239-1 2002 Reaction to fire tests for floorings - P.1: Determination of the burning behaviour

using a radiant heat source / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2002.


TEXTILES ISO ISO 9073-11 2002 Textiles - Test methods for nonwovens - P.11: Run-off / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 17202 2002 Textiles - Determination of twist in single spun yarns - Untwist/retwist method / By


THERMAL CONDUCTIVITY ISO ISO/TTA 4 2002 Measurement of thermal conductivity of thin films on silicon substrates / By


THERMAL TESTING IEC IEC 61857-22 2002 Electrical insulation systems - Procedures for thermal evaluation - P.22: Specific

requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS) / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 61857-23 2002 Electrical insulation systems - Procedures for thermal evaluation - P.23: Specificrequirements for general purpose, tall-channel model - Wire-wound electrical insulation system (EIS) / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

THERMISTORS IEC IEC 60539-1 2002 Directly heated negative temperature coefficient thermistors - P.1: Generic

specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.

THERMOSETTING POLYMERS ISO ISO 7432 2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to

prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

THICKNESS MEASUREMENT ISO ISO 17186 2002 Leather - Physical and mechanical tests - Determination of surface coating thickness /


THIN FILMS ISO ISO/TTA 4 2002 Measurement of thermal conductivity of thin films on silicon substrates / By



THREADS CSBTS GB/T 12716 2002 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made

on the threads / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS,2002.

TIME MEASUREMENT ISO ISO 764 2002 Horology - Magnetic resistant watches / By International Organization for

Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002. ISO 4168 2002 Timekeeping instruments - Conditions for carrying out checks on radioluminescent

deposits / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.

TOBACCO ISO ISO 6565 2002 Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter

rods - Standard conditions and measurement / By International Organization for Standardization (ISO). 3rded. - - Geneva: ISO, 2002.

TOOL SHANKS ISO ISO 5414-1 2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -

P.1: Dimensions of the driving system of tool shanks / By International Organization for Standardization(ISO). 3rd ed. - - Geneva: ISO, 2002.

ISO 5414-2 2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -P.2: Connecting dimensions of chucks and designation / By International Organization for Standardization(ISO). 2nd ed. - - Geneva: ISO, 2002.

TOWEL RAILS IEC IEC 60335-2-43 2002 Household and similar electrical appliances - Safety - P.2-43: Partical

requirements for clothes dryers and towel rails / By International Electrotechnical Commission (IEC). 3rded. - - Geneva: IEC, 2002.

TRACTORS ISO ISO 12003-1 2002 Agricultural and forestry tractors - Narrow-track wheeled tractors - P.1: Front-

mounted roll-over protective structures / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

ISO 12003-2 2002 Agricultural and forestry tractors - Narrow-track wheeled tractors - P.2: Rear-mounted roll-over protective structures / By International Organization for Standardization (ISO). Geneva:ISO, 2002.


ISO 5692-2 2002 Agricultural vehicles - Mechanical connections on towed vehicles - P.2: Couplingring 40 with socket / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

TRANSFORMERS IEC IEC 61558-2-9 2002 Safety of power transformers, power supply units and similar products - P.2-9:

Particular requirements for transformers for class III handlamps for tungsten filament lamps / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.

TRANSPORTATION DSM MS 1513 P.1 Sub-P.1 2002 Packaging - Transport of dangerous goods - P.1: General provision,




ISO ISO 15622 2002 Transport information and control systems - Adaptive cruise control systems -

Performance requirements and test procedures / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 15623 2002 Transport information and control systems - Forward vehicle collision warningsystems - Performance requirements and test procedures / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

TUBE HEAT EXCHANGERS ISO ISO 16812 2002 Petroleum and natural gas industries - Shell-and-tube heat exchangers / By


TUMBLE DRIERS IEC IEC 60335-2-11 2002 Household and similar electrical appliances - Safety - P.2-11: Particular

requirements for tumble dryers / By International Electrotechnical Commission (IEC). 6th ed. - - Geneva:IEC, 2002.

IEC 61121 2002 Tumble dryers for household use - Methods for measuring the performance / ByInternational Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

UNINTERRUPTIBLE POWER SYSTEMS IEC


IEC 62040-1-1 2002 Uninterruptible power systems (UPS) - P.1-1: General and safety requirements forUPS used in operator access areas / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

IEC 62040-1-2 2002 Uninterruptible power systems (UPS) - P.1-2: General and safety requirements forUPS used in restricted access locations / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.

VACUUM CLEANERS IEC IEC 60335-2-69 2002 Household and similar electrical appliances - Safety - P.2-69: Particular

requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use /By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2002.

IEC 60335-2-72 2002 Household and similar electrical appliances - Safety - P.2-69: Particularrequirements for automatic machines for floor treatment for commercial and industrial use / By InternationalElectrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002.

VARNISHES ISO ISO 4624 2002 Paints and varnishes - Pull-off test for adhesion / By International Organization for

Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002. ISO 6272-1 2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - P.1: Falling-



VARNISHES - FLASH POINT DETERMINATION ISO ISO 1516 2002 Determination of flash/no flash - Closed cup equilibrium method / By International

Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002. ISO 1523 2002 Determination of flash point - Closed cup equilibrium method / By International

Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2002.

VEGETABLE FATS FAO/WHO Codex alimentarius V.8 2001 Fats, oils and related products. S.1: Codex general standard for fats and

oils/ By Food and Agriculture Organization of the United Nations (FAO) and World Health Organization(WHO). 2nd ed. Rome: FAO/WHO, 2001.

Codex standard for fats and oils not covered by individual (CODEX STAN 19-1981, Rev.2-1999). S.2: Codex standard for fats and oils from vegetable sources


Codex standard for named vegetable oils (CODEX STAN 210-1999)Codex standard for olive oil, virgin and refined and for refined olive-pomace oil (CODEX STAN

33-1981, Rev.1-1999) S.3: Codex standard for fats and oils from animal sourcesCodex standard for named animal fats (CODEX STAN 211-1999) S.4: Codex standard for fats

and oils derived from edible fat and oilsCodex standard for magarine (CODEX STAN 32-1981)Codex standard for minarine (CODEX STAN 135-1981) S.5: Code of practice for the storage

and transport of edible fats and oils in bulkRecommended international code of practice for the storage and transport of edible fats and oils

in bulk (CAC/RCP 36-1987, Rev.1-1999) ISO ISO 10539 2002 Animal and vegetable fats and oils - Determination of alkalinit / By International

Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 10540-3 2002 Animal and vegetable fats and oils - Determination of phosphorus content - P.3:


ISO 15304 2002 Animal and vegetable fats and oils - Determination of the content of trans fatty acidisomers of vegetable fats and oils - Gas chromatographic method / By International Organization forStandardization (ISO). Geneva: ISO, 2002.


ISO 5507 2002 Oilseeds, vegetable oils and fats - Nomenclature / By International Organization forStandardization (ISO). 3rd ed. - - Geneva: ISO, 2002.



VEGETABLE OILS ISO ISO 3656 2002 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed

as specific UV extinction / By International Organization for Standardization (ISO). 3rd ed. - - Geneva:ISO, 2002.




ISO 10540-3 2002 Animal and vegetable fats and oils - Determination of phosphorus content - P.3:Method using inductively coupled plasma (ICP) optical emission spectroscopy / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.


ISO 15304 2002 Animal and vegetable fats and oils - Determination of the content of trans fatty acidisomers of vegetable fats and oils - Gas chromatographic method / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

VEHICLE REFLECTORS DSM MS 654 2002 Reflex reflectors for vehicles including cycles / By Department of Standards Malaysia


VELCOCITY MANAGEMENT DSM MS 1538 2002 Speed monitoring device for road vehicles / By Department of Standards Malaysia


VIBRATION MEASUREMENT ISO ISO 7475 2002 Mechanical vibration - Balancing machines - Enclosures and other protective measures


ISO 14839-1 2002 Mechanical vibration - Vibration of rotating machinery equipped with activemagnetic bearings - P.1: Vocabulary / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

VIBRATION TESTING ISO ISO 7475 2002 Mechanical vibration - Balancing machines - Enclosures and other protective measures


VIDEO RECORDERS IEC IEC 61880-2 2002 Video systems (525/60) - Video and accompanied data using the vertical blanking

interval - c- P.2: 525 progressive scan system / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.

IEC 62122 2002 Methods of measurement for consumer-use digital VTRs - Electronic and mechanicalperformances / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.


VIDEO RECORDING IEC IEC 62087 2002 Methods of measurement for the power connsumption of audio, video and related

equipment / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002. IEC 62289 2002 Video recording - Helical-scan digital video cassette recording format using 12,65

mm magnetic tape and incorporating MPEG-2 compression - Format D-10 / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.

IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-broadcasting / By International Electrotechnical Commission (IEC). Geneva: IEC 2002.

VITRIFIED CHINA SABS SABS 1003 2002 Fine china and vitrified tableware for domestic use / By South African Bureau of

Standards (SABS). 2nd ed. - - Pretoria: SABS, 2002. SABS 1004 2002 Fine china and vitrified tableware for non-domestic use / By South African Bureau of

Standards (SABS). 2nd ed. - - Pretoria: SABS, 2002.

VOCABULARY CSBTS GB/T 2900.5 2002 Electrotechnical terminology - Insulating solids, liquids and gases / By China State

Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 2900.55 2002 Electrotechnical terminology - Live working / By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. DSM MS 1535 P.4 2002 Domestic gas cooking appliances for use with liquefied petroleum gases - P.4:

Glossary / By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2002. IEC IEC 60050-131 2002 International Electrotechnical Vocabulary - P.131: Circuit theory / By

International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2002. IEC 60050-808 2002 International Electrotechnical Vocabulary - P.808: Video cameras for non-

broadcasting / By International Electrotechnical Commission (IEC). Geneva: IEC 2002. IEC 60050-444 2002 International Electrotechnical Vocabulary - P.444: Elementary relays / By

International Electrotechnical Commission (IEC). Geneva: IEC; 2002. IEC 60050-445 2002 International Electrotechnical Vocabulary - P.445: Specified time all-or-nothing

relays / By International Electrotechnical Commission (IEC). Geneva: IEC; 2002. ISO ISO 4046-1 2002 Paper, board, pulps and related terms - Vocabulary - P.1: Alphabetical index / By

International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - P.4: Paper and board grades and

converted products / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 4046-5 2002 Paper, board, pulps and related terms - Vocabulary - P.5: Properties of pulp, paper

and board / By International Organization for Standardization (ISO). Geneva: ISO, 2002.



ISO 8640-3 2002 Textile machinery and accessories - Flat warp knitting machines - P.3: Vocabulary ofpattening devices / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14132-1 2002 Optics and optical instruments - Vocabulary for telescopic systems - P.1: Generalterms and alphabetical indexes of terms in ISO 14132 / By International Organization for Standardization(ISO). Geneva: ISO, 2002.




ISO 14839-1 2002 Mechanical vibration - Vibration of rotating machinery equipped with activemagnetic bearings - P.1: Vocabulary / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

VOLUME MEASUREMENT ISO ISO 8222 2002 Petroleum measurement systems - Calibration - Temperature corrections for use when

calibrating volumetric proving tanks / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

ISO 8655-1 2002 Piston-operated volumetric apparatus - P.1: Terminology, general requirements anduser recommendations / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 8655-2 2002 Piston-operated volumetric apparatus - P.2: Piston pipettes / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

VOLUMETRIC ANALYSIS CSBTS GB 10205&10209.1-10209.4 2001 GB 10205: Monoammonium phosphate and diammonium

phosphate and their determination methods GB/T 10209 - P.1: Determination of total nitrogen content formonoammonium phosphate and diammonium phosphate (Titrimetric method after distillation) - P.2:Determination of available phosphate content for monoammonium phosphate and diammonium phosphate -P.3: Determination of water content for monoammonium phosphate and diammonium phosphate - P.4:Determination of particle size for monoammonium phosphate and diammonium phosphate / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2001.

VULCANIZED FIBRE ISO ISO 16057 2002 Coated abrasives - Vulcanized fibre discs / By International Organization for


VULCANIZED RUBBER ISO


ISO 4649 2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using arotating cylindrical drum device / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2002.

WATCHES ISO ISO 764 2002 Horology - Magnetic resistant watches / By International Organization for


WATER ISO ISO 14592-1 2002 Water quality - Evaluation of the aerobic biodegradability of organic compounds at



ISO 15705 2002 Water quality - Determination of the chemical oxygen demand index (ST-COD) -Small-scale sealed-tube method / By International Organization for Standardization (ISO). Geneva: ISO,2002.

ISO 16588 2002 Water quality - Determination of six complexing agents - Gas-chromatographicmethod / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

WATER - DETERMINATION OF CONTENT ISO ISO 15587-1 2002 Water quality - Digestion for the determination of selected elements in water - P.1:

Aqua regia digestion / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 15587-2 2002 Water quality - Digestion for the determination of selected elements in water - P.2:

Nitric acid digestion / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

WATER EXTRACTORS (LAUNDRY) IEC IEC 60335-2-4 2002 Household and similar electrical appliances - Safety - P.2-4: Particular

requirements for spin extractors / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.

WATER HEATERS IEC IEC 60335-2-35 2002 Household and similar electrical appliances - Safety - P.2-35: Particular

requirements for instantaneous water heaters / By International Electrotechnical Commission (IEC). 4th ed.- - Geneva: IEC, 2002.


IEC 60335-2-66 2002 Household and similar electrical appliances - Safety - P.2-66: Particularrequirements for water-bed heaters / By International Electrotechnical Commission (IEC). 2nd ed. - -Geneva: IEC, 2002.

WATER QUALITY ISO ISO 6107-3 1993 Water quality - Vocabulary - P.3 / By International Organization for Standardization

(ISO). 2nd ed. - - Geneva: ISO, 1993. ISO 6107-8 1993 Water quality - Vocabulary - P.8 / By International Organization for Standardization

(ISO). Geneva: ISO, 1993. ISO 9408 1999 Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds

in aqueous medium by determination of oxygen demand in a closed respirometer / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva : ISO, 1999.

ISO 14403 2002 Water quality - Determination of total cyanide and free cyanide by continuous flowanalysis / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14592-1 2002 Water quality - Evaluation of the aerobic biodegradability of organic compounds atlow concentrations - P.1: Shake-flask batch test with surface water or surface water/sediment suspensions /By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 14592-2 2002 Water quality - Evaluation of the aerobic biodegradability of organic compounds atlow concentrations - P.2: Continuous flow river model with attached biomass / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15587-1 2002 Water quality - Digestion for the determination of selected elements in water - P.1:Aqua regia digestion / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

ISO 15587-2 2002 Water quality - Digestion for the determination of selected elements in water - P.2:Nitric acid digestion / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

WATER SUPPLY ISO ISO 4633 2002 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines -

Specification for materials / By International Organization for Standardization (ISO). 3rd ed. - - Geneva:ISO, 2002.

WATER TESTING ISO ISO 15705 2002 Water quality - Determination of the chemical oxygen demand index (ST-COD) -

Small-scale sealed-tube method / By International Organization for Standardization (ISO). Geneva: ISO,2002.

WATER-ABSORPTION TESTS ISO ISO 15148 2002 Hygrothermal performance of building materials and products - Determination of

water absorption coefficient by partial immersion / By International Organization for Standardization (ISO).Geneva: ISO, 2002.

ISO 2417 2002 Leather - Physical and mechanical tests - Determination of the static absorption ofwater / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2002.


WATER-RESISTANCE TESTS ISO ISO 5403 2002 Leather - Physical and mechanical tests - Determination of water resistance of flexible

leather / By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 5404 2002 Leather - Physical and mechanical tests - Determination of the water resistance of

heavy leathers / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

WATER-VAPOUR TESTS ISO ISO 14268 2002 Leather - Physical and mechanical tests - Determination of water vapour permeability

/ By International Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 17229 2002 Leather - Physical and mechanical tests - Determination of water vapour absorption /


WEAR RESISTANCE ISO ISO 18914 2002 Imaging materials - Photographic film and papers - Method for determining the

resistance of photographic emulsions to wet abrasion / By International Organization for Standardization(ISO). Geneva: ISO, 2002.

WELDING ISO ISO 15614-8 2002 Specification and qualification of welding procedures for metallic materials -

Welding procedure test - P.8: Welding of tubes to tube-plate joints / By International Organization forStandardization (ISO). Geneva: ISO, 2002.

ISO 17659 2002 Welding - Multilingual terms for welded joints with illustrations / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2002.

WELDING ELECTRODES ISO ISO 14171 2002 Welding consumables - Wire electrodes and wire-flux combinations for submerged


ISO 14343 2002 Welding consumables - Wire electrodes, wires and rods for arc welding of stainlessand heat resisting steels - Classification / By International Organization for Standardization (ISO). Geneva:ISO, 2002.

WELDING SAFETY ISO ISO 15011-1 2002 Health and safety in welding and allied processes - Laboratory method for sampling

fume and gases generated by arc welding - P.1: Determination of emission rate and sampling for analysis ofparticulate fume / By International Organization for Standardization (ISO). Geneva: ISO, 2002.


WIND LOADING DSM MS 1553 2002 Code of practice on wind loading for building structure / By Department of Standards

Malaysia (DSM). Selangor D.E.: DSM, 2002.

WIND TURBINES IEC IEC/TR 61400-24 2002 Wind turbine generator systems - P.24: Lighting protection / By International


WINDOWS CSBTS GB/T 7108 2002 Graduation and test method for watertightness performance of windows / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 11976 2002 Graduation and test method of daylighting properties for windows / By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.

WIRE ROPES CSBTS GB/T 352 2002 Locked coil wire ropes / By China State Bureau of Quality and Technical Supervision


WORK STATIONS ISO ISO 14738 2002 Safety of machinery - Anthropometric requirements for the design of workstations at

machinery / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

WORK-HOLDING DEVICES ISO ISO 15637-2 2002 Holding fixtures of cylindrical abrasive sleeves - P.2: Holding fixtures for stationary

machines / By International Organization for Standardization (ISO). Geneva: ISO, 2002.

YARN ISO ISO 17202 2002 Textiles - Determination of twist in single spun yarns - Untwist/retwist method / By



ALPHABETICAL SUBJECT INDEX

Page

Abrasives 1Access 1Accidents Vocabulary 1Acoustic measurement 1Acoustics 1Acoustoelectric effects 2Acrylonitrile butadiene styrene 2Activated product 2Adhesion tests 2Adhesive tape 2Adhesives 2Adhesives - Torsion testing 3Aerobic bacteria 3Aerospace 3Aggregates 3Agricultural chemistry 3Agricultural equipment 4Agricultural tractors 4Aids for the disabled 4Air 4Air - Analysis 5Air cleaning equipment 5Air compressors 5Air filters 5Air permeability 5Air pollution 5Aircraft 5Aircraft components 6All-or-nothing relays 6Alloys 6Aluminium 7Aluminium alloys 7Ammonium phosphate 7Amplifiers 7Amplifiers - Optic fibres 7Anaesthetic equipment 7Analogue signals 7Analysis - Aliphatic hydrocarbons 8Analysis - Aromatic hydrocarbons 8Analysis - Carbon monoxide 8


Page

Analysis - Oxides 8Analysis Sulphur Dioxide 8Anchor nuts 8Animal fats 8Animal feed 9Animal feed - Qualitative analysis 10Animal oils 10Anthropometric characteristics 10Arc welding 10Arc welding - Aluminium alloys 11Arc-welding equipment 11Artists equipment 11Asbestos 11Ash determination 11ASTM publication 12Atmospheric corrosion 14Audio equipment 14Audio systems 14Audiovisual materials 14Automatic control systems 14Axial-thrust bearings 15Axial-thrust bearings - Dimensions 15Bags Cements 15Balancing machines 15Bars (materials) 15Bearings 15Beers 16Bend testing 16Biodegradability 16Biological analysis and testing 16Biotechnology 16Bituminous products 16Blankets 17Blind rivets 17Board (paper) 17Boats 18Boats Hulls 18Boilers - Codes 18Braking systems 18Breaking load 18


Page

Breathing apparatus 19Buildings 19Burettes 19Bushes (mechanical components) 19Cable cores 20Calcium inorganic compounds 20Cameras 20Canned foods 20Canned tuna 21Cap lamps - Explosive atmospheres 21Carbon black 21Carbon fibres 22Cargo ships - Fuel consumption 22Cassettes (magnetic tapes) 22Castings 22Catalysts 22Cellular materials 22Cements 23Ceramic and glass technology 23Ceramics 23Cereal products 23Certification (approval) 23Chains 24Chairs 24Channel flow - Liquids 24Character sets 24Charpy impact tests 24Chemical analysis and testing 24Childproof equipment - Safety measures 25Chinese characters 25Chromatography 25Cigarettes 26Cinematography 26Classification systems 26Cleaning equipment 26Clocks 27Clothes driers 27Coal tar - Disinfectants 27Coated fabrics 27Coatings 27


Page

Coatings - Walls 27Cocoa 28Coded representation 28Codes 28Coding (data conversion) 28Coffee 28Coke 28Colour-fastness tests 29Communication cables 29Communication equipment 29Communication networks 29Communication procedures 29Compressive strength 29Compressors 30Computer applications 30Computers 30Concrete 30Construction equipment 30Construction materials 30Construction materials - Fire tests 31Construction materials - Ignitability 31Construction systems 31Consumable electrodes 31Contraceptive devices 31Control systems 32Conveyor belts 32Cooking appliances 32Cotton 33Countersunk fasteners 33Covered electrodes 33Cranes 33Crayons 34Crimped connectors 34Crushing tests 34Current transformers 34Cutter bars 34Cycles - Children 34Dairy products 35Dangerous materials 36Data base languages 36


Page

Data link layer (OSI) 36Data processing 36Data - Quality 37Data structures 37Data transfer 37Data transmission 37Defibrillators 38Demulsification number 38Densitometers 38Density measurement 38Dental equipment 38Dental equipment - Implants (surgical) 38Dental rotary-cutting instruments 38Dentistry 38Design 39Designations 39Desks 39Detectors 39Determination of content 39Diagnosis (medical) 40Diagnostic testing - Machine tools 40Diagrams 41Diesel engines 41Digital signals 41Dilutors 41Dimensional change 41Dimensional tolerances 41Disabled people 41Dishwashing machines 42Dispensers 42Dispersions (chemical) 42Dosimeters 42Drainage 42Dried milk 42Drilling machines 43Drums (containers) 43Dry-heat tests 43Earphones 43Earth-moving equipment 43Edible alcohols 43


Page

Edible oils 43Educational facilities 43Electric cables 44Electric cells 44Electric conduits 44Electric connectors 44Electric control equipment 45Electric convertors 46Electric current 46Electric fences 46Electric furnaces 46Electric generators 47Electric insulators 47Electric motors 47Electric power stations 47Electric power systems 47Electric substations 47Electric wires 48Electrical cales 48Electrical components - Classification systems 48Electrical conductivity 48Electrical engineering 48Electrical household appliances 49Electrical installations 51Electrical installations - Lighting systems 51Electrical insulating materials 51Electrical insulating tapes 52Electrical insulation 52Electrical medical equipment 52Electrical protection equipment 52Electrically-operated devices 52Electricity supply meters 53Electromagnetic compatibility (EMC) 53Electronic data interchange (EDI) 54Electrostatics 55Emission 55Endurance testing 55Energy sources 56Energy transfer 56Engine fuel systems 56


Page

Environmental management 56Environmental testing 56Ergonomics 57Essential oils 57Fatty acids 57Ferrous metals 58Fibre optic cables 58Fibre optic connectors 58Fibre optics 58Fire extinguishers 59Fire resistance 59Fire tests 59Fish products 59Fishery products 60Flexible pipes 60Floor cleaning equipment 61Fluorescent lamps 61Fluorine 61Flushing cisterns 61Food products 61Forestry equipment 61Frying pans 62Functional analysis 62Gas chromatography 62Gas cylinders 62Gas turbines 62Gauges 63Gear drives 63Graphic symbols 63Heaters - Saunas 63Horticultural equipment 63Hydraulic motors 64Hydraulic transmission systems 64Immersion heaters 64Impact testing 65Implants (surgical) 65Information exchange 65Information technology 66Integrated circuits 68Interfaces (data processing) 68


Page

Internal combustion engines 69Iron ores 69Knitting machinery 69Lamp caps 69Lawn-mowers 70Lead-acid batteries 70Leather 70Library and information science 71Lighting systems 71Lightning protection 71Lime 71Liquefied petroleum gas 72Low-alloy steels 72Lubricating oils 72Machine tools - Vibration 72Magnetic cores 72Magnetic materials 72Mechanical measurement 73Mechanical testing 73Medical equipment 74Metal coatings 74Metamodel 75Microbiology 75Motion-picture film 75Motor vehicles 75Multicore cables 75Natural gas 76Network layer (OSI) 76Non-destructive testing 76Offshore construction works 76Optical communication systems 77Optical disks 77Optical fibres 77Optical instruments 77Optics 78Overhead power lines 78Packaging 78Paint extenders 79Paints 79Pallets 79


Page

Paper 79Paper products 80Paper pulp 80Petroleum 80Petroleum products 81Photographic chemicals 81Photographic film 81Pigments 82Pipe couplings 82Pipe fittings 82Pipes 82Plastics 83Portland cement 83Powder metallurgy 83Power measurement (electric) 84Pressure control 84Printed-circuit boards 84Process control 84Protective suits 85Protocol 85Pumps 85Railway engineering 86Recording systems 86Refractories 86Road vehicle components 86Road vehicles 86Rockwell hardness measurement 87Rotating electric machines 87Rotating generators 88Rubber 88Safety glass 88Safety harnesses 88Safety measures 88Screwdriver 89Sealing materials 89Seat belts 89Semiconductor devices 89Sheet materials 90Ships - Fire safety 90Short-circuit currents 90


Page

Shrinkage tests 90Sintered products 90Sodium carbonate 90Software techniques 91Soil testing 91Soils 91Sound broadcasting 91Sound intensity 91Space safety 92Space technology 92Stainless steels 92Steam-electric power stations 92Steel-wire ropes 92Steels 93Storage 93Storage batteries 93Strength of materials 93Surface treatment 93Tableware 94Tanks (containers) 94Telescopes 94Temperature measurement 94Tensile strength 95Terminology 95Testing 95Textile finishing machinery 96Textile floor coverings 96Textiles 97Thermal conductivity 97Thermal testing 97Thermistors 97Thermosetting polymers 97Thickness measurement 97Thin films 97Threads 98Time measurement 98Tobacco 98Tool shanks 98Towel rails 98Tractors 98


Page

Transformers 99Transportation 99Tube heat exchangers 99Tumble driers 99Uninterruptible power systems 99Vacuum cleaners 100Varnishes 100Varnishes - Bend testing 100Varnishes - Flash point determination 100Vegetable fats 100Vegetable oils 101Vehicle reflectors 102Velocity measurement 102Vibration measurement 102Vibration testing 102Video recorders 102Video recording 102Vitrified china 103Vocabulary 103Volume measurement 104Volumetric analysis 104Vulcanized fibre 104Vulcanized rubber 104Watches 104Water 105Water - Determination of content 105Water extractors (laundry) 105Water heaters 105Water - Quality 105Water supply 106Water testing 106Water-absorption tests 106Water-resistance tests 106Water-vapour tests 107Wear resistance 107Welding 107Welding electrodes 107Welding - Safety 107Wind loading 107Wind turbines 108


Page

Windows 108Wire ropes 108Work stations 108Work-holding devices 108Yarn 108

tisi library accession list february-march...

Documents