titanium, tantalum equipments for hcl regeneration and reuse in arp
TRANSCRIPT
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
1/29
TITANIUM Gr.7 & TANTALUM Equipments forSTEEL PROCESSING industries.
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
2/29
Acid (HCL) Heating in pickling bath
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
Traditionally, steel plants are using PTFE
immersion coils and direct steam spargers to
heat HCL in pickling baths. Due to the
continuous maintenance of the coils andspargers, there is a permanent
environmental impact. Using the custom
designed in-tank TANTALUM immersion
coils for the indirect steam heating in
pickling bath is the alternative cost effectivesolution. Tiaano, India use their extensive
experience and design the most innovative
and efficient immersion coils.
Tantalum Heat Exchanger Coils for HCL
heating in Pickling Baths.
Tantalum Heat
Exchanger
Coils for HCL
heating in
Pickling Baths
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
3/29
Acid (HCL) Heating in pickling bath
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
Tantalum U shaped, Grid, Serpentine & custom designedimmersion heat exchanger Coils are in our scope,
Offers...
Complete / Superior Corrosion resistance.
High heat transfer characteristics & steam pressure
capabilities than non-metallic PTFE coilsreduce
required surface area.
Cost comparative to PTFE coils.
Seam welded metal design eliminates breakage
during handling, Installation & Operation.
Easily retrofittable into existing equipment footprint. Elimination of HCL leakages into steam condensate.
No spare parts to keep in inventory.
Elimination of down time due to equipment failure.
Tantalum Heat
Exchanger
Coils for HCL
heating
Pickling Baths
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
4/29
Acid (HCL) Heating in pickling bath
Tantalum Heat
Exchanger
Coils for HCL
heating
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
5/29
Tantalum Shell and Tube Heat Exchangers for
HCL heating in Pickling Baths
Its extensive inert & heat transfer properties,TANTALUM shell & tube heat exchanger is having vitalrole in hydrochloric acid heating at high turbulenceshallow tank pickling bath. Traditionally Carbon
block heat exchangers are getting used, its fragilenature and multi-gasket construction requirescontinuous maintenance and repair work whichresults expensive spare parts and downtime.
Alternative to Carbon heat exchangers, Tiaano offersa full line of standard and custom-made Tantalumshell & tube heat exchangers for the indirect steamheating in picking bath operations.
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
Acid (HCL) Heating in pickling bath
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
6/29
Business template
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
Acid (HCL) Heating in pickling bath
Tantalum Shell and Tube Heat Exchangers
for HCL heating in Pickling BathsOffers...
Complete / Superior Corrosion resistance. Better / High heat transfer characteristics. Cost comparative to Carbon Block Heat Exchangers.
Higher steam pressure capabilities than carbon block- reduce the required surface area.
Seam welded metal design eliminates fragile nature,breakage during handling,Installation & Operation.
Easily retrofittable into existing equipment footprint.
Elimination of HCL acid leakages into steamcondensate.
No spare parts to keep in inventory.
Elimination of down time due to equipment failure.
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
7/29
Business template
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
Acid (HCL) Heating in pickling bath
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
8/29
HCL Regeneration (Line Specification)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
9/29
HCL Regeneration
THE TANK FARM & SUMP
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
10/29
HCL Regeneration Equipments
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Tantalum Shell
and Tube Heat
Exchangers
for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
Titanium Gr.7 (Ti-Pd. alloy) Acid Regeneration Plant
(ARP) equipments for recovery and reuse of HCL
Tiaano, offers Titanium Gr.7 (ti-pd alloy) equipments forPollution abatement cum Hydrochloric Acidregeneration plants for the recovery and reuse of Acid.They are
Ti-Pd. (Titanium Gr.7) Venturi F5. Ti-Pd. (Titanium Gr.7) Blowers V 31. Ti-Pd. (Titanium Gr.7) Impellers V31. Ti-Pd. (Titanium Gr.7) Fasteners.
Ti-Pd. (Titanium Gr.7) Acid Lance P2. Ti-Pd. (Titanium Gr.7) Column Pipes A6. Ti-Pd. (Titanium Gr.7) Diffuser Pipe bends A6. Ti-Pd. Sleeved EPDM Bellows for V 31, A-10, A6 etc.
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
11/29
HCL Regeneration Equipments
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Tantalum Shell
and Tube Heat
Exchangers
for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
The hydrochloric acid used in the pickling process is
thermally treated in the acid regeneration plant for thepurpose of recovery and reuse. The plant is divided intothe following sections:
The rector in which the iron chloride is transformed
into iron oxide and gaseous HCl.
The venturi, in which the hot gases are cooled downfrom 850C to100C approx. During this process, thepickling acid is strongly concentrated due to
evaporation of water.
The separator in which the waste gases coming fromthe venturi liquid.
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
12/29
HCL Regeneration Equipments
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Tantalum Shell
and Tube Heat
Exchangers
for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
The absorber in which the hydrochloric acid is recovered by
absorption of the gaseous HCl in water.
The fan F-V-31 with the fume stake which sucks of the gasesdeveloped in the reactor and keeps the entire system belowatmospheric pressure. The residual inert gases are led throughthe fume stake into the atmosphere.
The venture F25 with separator B26 in which a final treatmentof the waste gas is achieved.
The chemical reaction during the pickling process can beillustrated with the following reaction equation: Fe2O3 + 6HCl
= 2FeCl3 + 3H2O FeO + 2HCl = FeCl2 + H2O 2FeCl3 + H2 = 2FeCl2 +2HCl3.
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
13/29
HCL Regeneration Equipments
Tantalum HeatExchanger
Coils for HCL
heating in
Pickling Baths
Tantalum Shell
and Tube Heat
Exchangers
for HCL
heating in
Pickling Baths
Titanium Gr.7 (Ti-
Pd. alloy) ARP
Equipments for
recovery and
reuse of HCL
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
14/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
15/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
16/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
17/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
18/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
19/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
20/29
(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
21/29
HCL Re (Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
22/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
23/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
24/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
25/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
26/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
27/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
28/29
HCL Regeneration(Our Drawings For Steel Pickling Equipments)
-
7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP
29/29
OUR VALUABLE REPLICATED CLIENTS
M/s. UTTAM GALVA STEELS LTD., INDIA.
M/s. JSW ISPAT STEEL LIMITED, INDIA.
M/s. LLOYDS STEEL INDUSTRIES LTD., INDIA.
M/s. STEEL AUTHORITY OF INDIA LTD., INDIA.
M/s. TATA IRON & STEEL CO. LTD., INDIA.
M/s. NEWTECH INTERNATIONAL WLL, BAHRAIN.
M/S. VJIKKS ENGG POWER (M) SDN BHD.,
MALAYSIA.