tk126 machine tools power tools & machine tools · 2017-08-26 · power tools & machine...

This catalog is printed using environmentally friendly paper and vegetable oil inks.

Printed in Japan 16DV06- 1Specifications and designs are subject to change at any time without notice.

POWER TOOLS &MACHINE TOOLS

ISO 9001ISO 14001

ISO 9001JQA-2042Machine Tools Division

ISO 14001JQA-EM4057NITTO KOHKI CO., LTD.

DISTRIBUTED BY

Overseas Affiliates / Offices

NITTO KOHKI CO., LTD.Head Office9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555, JapanTel : +81-3-3755-1111 Fax : +81-3-3753-8791 E-mail : [email protected]

www.nitto-kohki.co.jp/eWeb

NITTO KOHKI U.S.A., INC.46 Chancellor Drive, Roselle, Illinois 60172, U.S.A.For Machine ToolsTel : +1-630-924-9393 Fax : +1-630-924-0303For CuplasTel : +1-630-924-5959 Fax : +1-630-924-1174www.nittokohki.com

NITTO KOHKI EUROPE CO., LTD.Unit A5, Langham Park Industrial Estate, Maple Road,Castle Donington, Derbyshire DE74 2UT, United KingdomTel : +44-1332-653800 Fax : +44-1332-987273www.nitto-kohki.eu/en

NITTO KOHKI DEUTSCHLAND GMBHGottlieb-Daimler-Str. 10, 71144 Steinenbronn, GermanyTel : +49-7157-989555-0 Fax : +49-7157-989555-40www.nitto-kohki.eu/de

NITTO KOHKI AUSTRALIA PTY LTD77 Brandl Street, Eight Mile Plains, Queensland 4113, AustraliaTel : +61-7-3340-4600 Fax : +61-73340-4640www.nitto-australia.com.au

NITTO KOHKI (SHANGHAI) CO., LTD.Room1506, Suite C, Orient International Plaza,No.85 Loushanguan Road, Shanghai 200336, ChinaTel : +86-21-6415-3935 Fax : +86-21-6472-6957www.nitto-kohki.cn

NITTO KOHKI (SHANGHAI) CO., LTD. Shenzhen Branch2005C Shenzhen ICC Tower, Fuhuasanlu 168,Futian District, Shenzhen, Guangdong 518048, ChinaTel : +86-755-8375-2185 Fax : +86-755-8375-2187www.nitto-kohki.cn

NITTO KOHKI CO., LTD. Singapore Branch10 Ubi Crescent #01-62, Ubi Techpark Lobby D, Singapore 408564Tel : +65-6227-5360 Fax : +65-6227-0192www.nitto-kohki.co.jp/e/nksb/index.html

NITTO KOHKI CO., LTD. Bangkok Representative OfficeM&A Business Center, Q-House Convent Bldg.,38 Convent Rd., Silom, Bangrak, Bangkok 10500, ThailandTel : +66-2632-0307 Fax : +66-2632-0308www.nittobkk.com

NITTO KOHKI CO., LTD. India Liaison Office3rd Floor, Building No.9-A DLF Cyber City, Phase-III,Gurgaon, Haryana 122002, IndiaTel : +91-124-454-5031 Fax : +65-6227-0192

NITTO KOHKI CO., LTD. Mexico Representative OfficeOF1109 Torre Corporativo 1 Piso 11 Central Park Armando Birlain Shaffler#2001 Col Centro Sur, Queretaro, Qro, C.P. 76090, MexicoTel : +52-442-290-1234

PUNCHING

CHAMFERING

DEBURRING

GRINDING

SCALING

FILING

PUNCHING

CHAMFERING

BORINGBORING

DEBURRING

GRINDING

SCALING

FILING


Tk126

Pneumatic, Electric & Hydraulic

GENERAL CATALOG

1

CONTENTS

Consumables

Product Line

Click on a product picture. Click on "Movie"You can also view this

on your smartphone or tablet.

www.nitto-kohki.co.jp/e/prd/pv/tool/

Punches &Dies

Punches & Dies forSelfer ------------------------- 20

AnnularCutters

Broach Cutters & BroachHolders ---------------------- 15

IndexableInserts

Indexable Inserts forBeveler ----------------------- 29

Abrasive Belts Abrasive Belts forBelton -------------------- 38,40

Needles Needles for Jet Chisel ----- 34

Grinding &Sanding Discs

Grinding & SandingDiscs for Myton ------------ 36

Boring Atra Ace ---------------------- 5

Punching Selfer ------------------------- 17Pump ------------------------- 17Handy Selfer ---------------- 19

Scaling Air Chipper ----------------- 30Auto Chisel ------------------ 31Super Kelen ----------------- 32Jet Chisel -------------------- 33

Grinding &Sanding

Myton ------------------------ 35Belton ------------------------ 37

Filing Super Hand ----------------- 45Micro Air Hand ------------ 47

Deburring Burr Cutter ------------------ 47

Cutting Super Saw ------------------ 48

Drilling Air Drill ---------------------- 48

Suspending Spring Balancer ------------ 49

Grinding &Sanding

Free Sander ----------------- 41Line Sander ----------------- 42Orbital Sander ------------- 43Palm Orbital Sander ------ 43Air Sonic -------------------- 44

Chamfering Beveler ----------------------- 25

Nitto Kohki has made every effort in developing "Environmental Improvement Plans" through the implementation of ISO14001, to execute environmentally conscious business activities on a company-wide basis. As a part of our ongoing commitment to the environment, we are also commited to reduce and/or exclude restricted chemical substances from our products as designated by RoHS directives, laws and regulations of chemical susbtances.

Check out our video gallery to see our products at work.

Green ProcurementGreen Procurement

2

High-End Features of Atra Ace Drilling Machines

High-End Features of Atra Ace Drilling MachinesEnhance Your Productivity and Safety

CLA-2720 A-100WA-5000 AO-5575WOJ-3200 LO-3550QA-6500 WA-3500QA-4000

1. Automatic control & feed are activated by simply pushing the feed handle to engage the clutch.

2. The feed speed is reduced for the first few seconds after boring begins to ensure a smooth cut through the mill scale.

3. When the cutter has become dull or it cuts through difficult materials, the load sensor will automatically activate the Step Feed Program to help penetrate material. When working on deep holes or large diameter holes, the Step Program will also help to reduce swarf build up around the cutter as the waste material will break off with each Step cycle.

4. The feed speed is continuously monitored and updated proportionally to the load on the cutter.

5. QA-4000/QA-6500 : The sensing system responds to driling forces on the cutter for the optimum cutting condition.

WA-3500/ WA-5000 : The dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting condition.

6. The drill will not start until the magnetic field is active.

7. QA-4000/QA-6500/WA-3500/WA-5000/WOJ-3200/AO-5575/LO-3550 : The drill will not re-start even if power is re-supplied after accidental shutdown. Drilling can only be continued after turning on the drill switch.

CLA-2720 : If the battery pack is replaced/removed whilst both the magnet and the drill motor switch are in the on position, the drill will not operate until both switches are reset.

8. QA-4000/QA-6500/WA-3500/WA-5000 : If any lateral movement or excess vibration is detected, both the drill and the feed motor stop.

AO-5575/CLA-2720 : If any lateral movement or excess vibration is detected, the drill motor stops.

9. QA-4000/QA-6500/WA-3500/WA-5000 : When an excessive load is applied to the cutter, both the drill and the feed motor will stop automatically.

WOJ-3200/AO-5575/LO-3550/CLA-2720/A-100 : When an excessive load is applied to the cutter, the drill motor will stop automatically.

10. QA-4000/QA-6500 : After the cut has finished, a detector responds to the reduction in load, the drill retracts quickly and then both the drill and feed motor automatically stop.

WA-3500/WA-5000 : After the cut has finished, a detector responds to the reduction in load and both the drill and the feed motor automatically stop.

11. While the drill motor is running, if no load is applied within 10 seconds, the drill will stop automatically to save the battery.

12. Replacement is quick and easy with our unique push fit self-centering cutter system.

Auto-feed

Slow Start Mechanism

Step Feed

Variable Automatic Feed

Load Sensor

Magnet Open-circuit Sensor

Fail-safe Restart

Built-in Motion Sensor

Overload Stop

Cycle Stop

Unique Battery Conservation

One-touch Cutter Replacement

Ref. No.

1

2

3

4

5

6

7

8

9

10

11

12

Features

A t r a A c e S p e c i f i c a t i o n s A t r a A c e S p e c i f i c a t i o n s

3 4

Specifications

Model

Power Source (Single Phase)

Rated Power Consumption

Rated Current

No-load Speed

Magnet Power Consumption

Max. Hole Diameter

Max. Plate Thickness

One-touch Type JETBROACH

Side-lock Type JETBROACH

One-touch Type HI-BROACH

Twist Drill

Max. Stroke

Magnet Holding Power

Magnet Dimensions

Power Cord Length

Mass (Weight)

Feeding

Page

CLA-2720

Battery

324

18

430

18

27

20

-

-

-

60

5500 (561)

65 x 126

-

7

Manual

5

12 to 17

6 to 12

12 to 15

6 to 12

12 to 17

9 to 50

17.5 to 55

9 to 75

12 to 17

9 to 50

17.5 to 55

9 to 75

110 - 120V AC,

50/60 Hz

10.2

220 - 240V AC,

50/60 Hz

5.1

110 - 120V AC,

50/60 Hz

8.6

38

220 - 240V AC,

50/60 Hz

4.3

30

17.5 to 27

6 to 20

16 to 27

6 to 20

LO-3550

220 - 240V AC,

50/60 Hz

800

3.3

950

35

35

50

12 to 35

6 to 50

-

-

-

-

-

80

5500 (561)

65 x 145

3

8.7

Manual

7

QA-6500

220 - 240V AC,

50/60 Hz

1010

4.5

400/750

75

65

50

17.5 to 65

9 to 50

-

-

18 to 35

9 to 25

-

88

9800 (1000)

100 x 200

5

26

Automatic

13

A-100

220 - 240V AC,

50/60 Hz

1600

7.4

330

80

100

75

-

-

50 to 100

13 to 75

-

-

-

122

17640 (1800)

130 x 256

5

50

Manual

14

WA-3500

1100

950

34

35

35

17.5 to 35

9 to 50

-

-

14 to 35

9 to 25

-

83

7056 (720)

92 x 213

3

20

Automatic

9

12 to 17

9 to 50

12 to 17

9 to 50

17.5 to 50

9 to 75

17.5 to 50

9 to 75

110 - 120 V AC,50/60 Hz

10.8

220 - 240 V AC,50/60 Hz

5.4

110 - 120 V AC,50/60 Hz

10.8

220 - 240 V AC,50/60 Hz

5.4

WA-5000

1150

350 / 650

75

50

75

-

-

14 to 50

9 to 50

-

107

9800 (1000)

101 x 201

3

23

Automatic

9

AO-5575

1150

350/650

50

55

75

-

-

12 to 50

9 to 50

-

105

10000 (1020)

86 x 170

3

18

Manual

11

WOJ-3200

950

870

32

50

12 to 32

9 to 50

-

-

-

-

Max. 13

130

9000 (918)

99 x 177

3

13

Manual

11

14 to 15

9 to 12

14 to 15

9 to 12

16 to 18

9 to 25

16 to 18

9 to 25

110 - 120 V AC,50/60 Hz

6.1

4

220 - 240 V AC,50/60 Hz

3.0

5

QA-4000

680

750

50

40

35

17.5 to 40

9 to 35

-

-

-

75

6664 (680)

82 x 172

18.5

Automatic

13

W

A

min-1(rpm)

W

mm

mm

mm

mm

mm

mm

mm

mm

N(kgf)

mm

m

kg

Hole Diameter

Plate Thickness

Hole Diameter

Plate Thickness

Hole Diameter

Plate Thickness

Hole Diameter

Elec

tric

Dri

llH

ole

Capa

city

CLA-2720 LO-3550 WOJ-3200 QA-6500 A-100AO-5575WA-3500 WA-5000 QA-4000

B O R I N G B O R I N G

5 6

Compact and cordless operation,powered by a rechargeable lithium-ion battery.• Weighs only 7 kg with battery installed• Compact size allows drilling in tight spots

• Carry Case• Cutting Oil 0.5L• Jet Oiler No.3013• Tube 4 x 7 mm, 1 m Long• Handle• Battery Charger• 2 pieces of Battery Pack 18V NBL18006• Blade

Accessories Included• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• Hex. Socket Head Cap Screw 5 x 12• Hex. Socket Head Set Screw 8 x 28• Spanner 8 x 10• Guard• Safety Strap

SpecificationsModelVoltageBattery Pack (Lithium-ion Battery)No-load SpeedHoleCapacity

Magnet Holding PowerMagnet DimensionsCutter PositionAjustmentMass (Weight)

min-1(rpm)

N(kgf)mmmmmm

kg

CLA-272018 V DC

NBL18006 (18V 4.0 Ah)430

5500 (561)65 x 126

10107*

CutterOne-touch Type JETBROACH 25LOne-touch Type JETBROACH 35LOne-touch Type HI-BROACH 25L

Pivot Side to SideStraight Front to Back

mm

Hole Diameter12 to 17

17.5 to 2712 to 1516 to 27

Plate Thickness6 to 126 to 206 to 126 to 20

*Including Battery Pack and Feed Handle

*In case of a full charge from an empty battery. However, it can be charged up to 95% in 45 min.

Battery ChargerPower SourceCharging TimeChargeable Battery Pack

NC14435220 - 240 V AC

90 min*NBL18006 (18 V 4.0 Ah)

151 mm199 mm

293 mm

151 mm199 mm

293 mm

PNRef. No. Description Sales UnitTB01507TB09657TB04374TB07696

1234

1 piece

Cutting Oil 2LOil Tank Ass’ySupporting Magnet Ass’yPipe Attachment Ass’yOne-touch Type JETBROACH 25L, 35LOne-touch Type HI-BROACH 25L

Optional Accessories

CLA-2720 LED Indication Light Safety Features

LED INDICATION – Battery level and Motor load can be monitored while drilling

MOTORLOAD

INDICATION

SLIDE SLIPDETECTION

BATTERY LEVEL

INDICATION

MEANING

MEANING

VOLTAGE LEVEL

ELECTRIC CURRENT OF THE ELECTRIC DRILL

BATTERYLEVEL LOW

BATTERYFULL

REQUIRECHARGING

PARTIALLYCHARGED

LIGHT LOAD MEDIUM LOAD OVERLOAD MOTOR STOPPEDBY OVERLOAD

YELLOWGREEN3 TIMES*

RED BLINKING (WHITE)BLINKING

BLUEBLINKING

GREENBLINKING

Caution

“NO LOAD”DETECTION

MOTORNOT ACTIVATED

IN TIME

“Caution” If an excessive load is maintained during the cut, the motor will shut-off to prevent damage or injury to the operator.

SAFETY

When a slide slip is detected, the blue light will flash and the Motor will stop automatically.

While the electric drill is running, if no load is applied for 7 seconds, the green light will flash. After another 3 seconds without load, the electric drill will be stopped automatically.

After the Magnet switch is turned on, if the Motor switch is not turned on within 10 seconds, the green light will flash.

LED Indication Light

RED RED BLINKING

REDYELLOWGREEN

ENERGY-SAVING

3 TIMES* 3 TIMES* CONTINUOUS

*After turning on the magnet switch the light flashes 3 times with the color according to the battery level, then the light will turn green and the tool is ready for use. If the light flashes red 3 times or continuously, replace the low battery pack with a charged battery pack.

Efficient Load

Feed handles can be positioned on the right or left sidefor ease of drilling and mounting in confined spaces.

After engaging the magnet, the drill position can be adjusted up to 10 mmtravel on each axis straight front to back and pivot side to side.

10 mm

Drilling Position Adjustment

Using the Lithium-ion battery it takes about 90 minutesfor a full charge.Sufficient charge (95%) can be achieved in just45 minutes.

Reversible Feed Handle

Portable Magnetic Base Drilling Machine

ATRA ACE manual feed

TOP-LEVEL SAFETY

The machine checks for faults itself

Self-check Function

Highly Sensitive Sensor Equipped

Side slip and inclination detected by a built-in sensor

1 42 3

Powered by Lithium-ion Battery

Battery Charger

Battery Pack

Highly Advanced Energy-Saving

Unnecessary operations are eliminated.

Automatic Drill Stop and Warning Function

The large electric current on start-up is preventedby starting the electric drill gently.

Soft Start Function

Magnetic Force Control Function

The magnet force is automatically reducedwhen the drill is not running.

Model CLA-2720• Max. 27 mm dia. x 20 mm deep

Lithium-ion batteries are required to be recycled; never discard a lithium-ion battery in the waste. Please contact your local sales office or community recycling program for information on properly disposing of lithium-ion batteries.

This chip breaker prevents the cutterfrom becoming jammed with metal shavings.

10 mm

Chip Breaker


7 8

Compact, light weight, low profile designgives you greater hole making mobility• Drilling on 100 mm or more width web and flange of wide flange beam• Designed to improve drilling on walls, confined and elevated locations• Drill position can be adjusted up to 10 mm travel on each axis straight front to back and pivot side to side

112 mm112 mm339 mm339 mm

276.2 mm276.2 mm

1 4 5 62 3

• Carry Case• Cutting Oil 0.5L• Feed Handle• Sub Handle• Pilot Pin 08035• Spanner 17• Blade

Accessories Included• Hex. Socket Bolt 5 x 12• Hex. Socket Head Set Screw 8 x 28• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• Spanner 7 x 8• Guard• Safety Strap

SpecificationsModelPower Source (Single Phase)ElectricDrill

HoleCapacity

Magnet Holding PowerMagnet DimensionsCutter PositionAjustmentPower Cord LengthMass (Weight)

WA

min-1(rpm)

N(kgf)mmmmmm

mkg

LO-3550220 - 240 V AC, 50/60 Hz

8003.3950

5500 (561)65 x 145

10103

8.7*

Rated Power ConsumptionRated CurrentNo-load SpeedCutterOne-touch Type JETBROACH 25LOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50L

Pivot Side to SideStraight Front to Back

mm


17.5 to 3512 to 35

Plate Thickness6 to 256 to 356 to 50

*Without an electric cord and a sub handle

After engaging the magnet, the drill position can be adjusted up to 10 mmtravel on each axis straight front to back and pivot side to side.

The feed handle can be locked at varying angles to enhance productivity.

10 mm

10mm

Pull the feed handleto adjust the angle.


Chip Breaker

Easy Drilling Position Adjustment

The feed handle can be positioned on the right or left hand side for easeof drilling and mounting in confined spaces.

Reversible Feed Handle

Pipe Attachment Ass’y

Adjustable Feed Handle

On / off buttons of the magnet and the drill motor are on the front paneland can be operated by one hand. Drilling conditions can be checkedby lamp colors.

The LED load display allows propercutting pressure adjustments.

LED Load Indicator

OFF

Magnet SwitchOFF

ONON

The motor switchcan be activatedafter the magnetswitch is turned on.

Motor Switch

Easy-to-use Switch Panel

Fast revolution of Jetbroach cutter makes less cutting resistance andsmooth handling.

Light Handle Operation

PNRef. No. Description Sales UnitTB01507TQ10581TB01098TB07306TB04374TB07696

123456

1 piece

Cutting Oil 2LJet OilerTube 4 x 7 x 3000 Ass’yLubrication Adapter Ass’ySupporting Magnet Ass’yPipe Attachment Ass’yOne-touch Type JETBROACH 25L, 35L, 50L


*50L for stacked plates



The carrying case is a rugged accessory that provides a convenientway to transport and store the LO-3550.

A Carrying Case Is Provided

Optional Accessories for ATRA ACE

The Pipe Attachment Ass’y is an optional base to securely fasten an Atra Ace on pipe for drilling. The chain can easily and securely fit around pipes having an outside diameter of 48.6 to 318.5 mm.

Example of installation on a pipe

Supporting Magnet Ass’y

If the accessory safety strap or chain is unable to be properly secured to prevent the Atra Ace from falling off the workpiece, the supporting magnet ass’y is recommended. It employs a permanent magnet and can secure the Atra Ace even if power is interrupted.

InstallationExample

Applicable Models when a 35 mm or 50 mm lengthone touch type Jetbroach cutter is used:CLA-2720, WOJ-3200, LO-3550, WA-3500, and QA-4000

Applicable Models:CLA-2720, LO-3550, WA-3500, WOJ-3200, AO-5575, QA-4000,and QA-6500

Applicable Pipe Size:48.6 to 318.5 mm PN : TB07696

PN : TB04374

Model LO-3550• Max. 35 mm dia. x 50 mm deep


9 10

High-performance feed system & high-tech componentsPortable Magnetic Base Drilling Machine

ATRA ACE auto • Drilling time and cutting performance are enhanced by the automatic feed function.

1

4 5

2 3

• Carry Case• Cutting Oil 0.5L• Pilot Pin 08035• Side Handle


Magnet Power ConsumptionHoleCapacity

Max. Stroke Magnet Holding PowerMagnet DimensionsPower Cord LengthMass (Weight)Accessories Included

WA

min-1(rpm)W

mmN(kgf)

mmmkg

WA-3500

1100

95034

837056 (720)92 x 213

320

Rated Power ConsumptionRated CurrentNo-load Speed

CutterOne-touch Type JETBROACH 25LOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50LOne-touch Type JETBROACH 75LOne-touch Type HI-BROACH 25LOne-touch Type HI-BROACH 50L

mm

110 - 120 V AC, 50/60 HZ

10.2

Hole Diameter-

17.5 to 3517.5 to 35

-14 to 35

-

220 - 240 V AC, 50/60 Hz

5.1

Plate Thickness-

9 to 359 to 50

-9 to 25

-

WA-5000

1150

350 / 65075

1079800 (1000)101 x 201

323

110 - 120 V AC, 50/60 HZ

10.8


17.5 to 4012 to 5017 to 5014 to 5014 to 50

220 - 240 V AC, 50/60 Hz

5.4

Plate Thickness9 to 259 to 359 to 509 to 759 to 259 to 50

PNRef. No. Description Sales Unit WA-3500 WA-5000Applicable Model

TB05186TB01507TB04374TB02536TB07696

12345

1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

Chip Breaker Ass’yCutting Oil 2LSupporting Magnet Ass’ySleeve 6.5 for Triangle Shank Drill BitPipe Attachment Ass’yOne-touch Type JETBROACH 25LOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50LOne-touch Type JETBROACH 75LOne-touch Type HI-BROACH 25LOne-touch Type HI-BROACH 50L

Replacement is quick and easy with our uniquepush fit self-centering cutter system.

409 mm237 mm

535 mm

409 mm237 mm

535 mm

237 mm

425 mm

613 mm

237 mm

425 mm

613 mm

• 3 mm Hex. Socket Screw Key• 8 x 10 mm Spanner• Guard• Chain

• Carry Case• Cutting Oil 0.5L• Pilot Pin 08050• Side Handle• 3 mm Hex. Socket Screw Key


Mounting the cutter Removing the cutter


••••••••

•••••••••


Load SensorThe dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting condition.

Variable Automatic FeedThe feed speed is continuously monitored and updated proportionally to the load on the cutter.

Cycle StopAfter the cut has finished, a detector responds to the reduction in load and both the drill and the feed motor automatically stop.

Overload StopWhen an excessive load is applied to the cutter, both the drill and the feed motor will stop automatically.

Auto-feedAutomatic control & feed are activated by simply pushing the feed handle to engage the clutch.

Slow Start MechanismThe feed speed is reduced for the first few seconds after boring begins to ensure a smooth cut through the mill scale. Auto-feed on

Feed handle

New drill control prevents cutters from breaking

Model WA-3500• Max. 35 mm dia. x 50 mm deep

Model WA-5000• Max. 50 mm dia. x 75 mm deep

Magnet Open-circuit SensorThe drill will not start until the magnetic field is active.

Fail-safe RestartThe drill will not re-start even if power is re-supplied after accidentalshutdown. Drilling can only be continued after turning on the drill switch.

Built-in Motion SensorIf any lateral movement or excess vibration is detected, both the drill andthe feed motor stop. Nitto Kohki is the first company to incorporatethis feature into magnetic base drills.

• Standard accessory for the WA-5000• Optional accessory for the WA-3500

Fail-Safe Protection

Two Speed Selection (WA-5000)

Speed can be changed tosuit the type and size of the cutter.

350 min-1350 min-1 650 min-1650 min-1

Coolant is fed directly to the inside of the cut.The coolant system also features an auto shut-off.

Coolant into the Heart of the Cut Improved Bearing Bracket

Our precision bearing bracket alignscutters precisely, which increases cutter life.


Chip Breaker


11 12

New generation magnetic base drilling machines helpmeet productivity and safety goals.


ATRA ACE manual feed• Advanced safety system

• Carry Case• Oil Tank Ass'y• Pilot Pin 08035• Sub Handle• 2 pieces of Hex. Socket Head Bolt 5 x 10 mm




WA

min-1(rpm)W

mmN(kgf)

mmmkg

WOJ-3200

950

870

Max. 13 mm dia.130

9000 (918)99 x 177

313


CutterOne-touch Type JETBROACH 25LOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50LOne-touch Type JETBROACH 75LOne-touch Type HI-BROACH 25LOne-touch Type HI-BROACH 50LTwist Drill

mm

220 - 240 V AC, 50/60 Hz

4.3

30

110 - 120 V AC, 50/60 Hz

8.6

38

220 - 240 V AC, 50/60 Hz

5.4

110 - 120 V AC, 50/60 Hz

10.8

AO-5575

1150

350 / 65050

-105

10000 (1020)86 x 170

318


17.5 to 4012 to 55

17.5 to 5512 to 5012 to 50


17.5 to 3212 to 32

---



---


17.5 to 3212 to 32

---


---


17.5 to 4012 to 55

17.5 to 5512 to 5012 to 50


• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• 6 mm Hex. Socket Screw Key• 8 x 10 mm Spanner• Guard• Safety Strap

• Carry Case• Cutting Oil 0.5L• Pilot Pin 08050• Side Handle• 3 mm Hex. Socket Screw Key


318 mm

361 mm

318 mm196 mm196 mm

361 mm

296 mm

611 mm

296 mm186.5 mm186.5 mm

611 mm

Replacement is quick and easy withour unique push fit self-centering cutter system.


Chip Breaker


WOJ-3200 AO-5575

One-Touch Cutter Replacement Reversible Feed Handle

The world's first manual feed with ''Smart-Stop / Rapid-Restart'' technology for WOJ-3200 / AO-5575This new feature is a breakthrough in the Manual drill industry. Formerly only found on high end Nitto Kohki Automatic drills, this technology displaysthe current drill status via the LED Load Indicator. Customers will experience a cutting edge drill management system designed solely around saving timeand money in replacement parts and cutters in addition to reducing user fatigue and down time.

As the drilling load increases, the load indicator will change in color from green to orange to red. In addition, if excessive feeding force is applied, the load indicator will rapidly blink red and the rotation of the drill motor will slow down and temporarily stop. If the load is released while the load indicator is blinking red, the drill motor will resume its rotation.

RedOrangeGreen Green / Orange

“Rapid-Start” resumes drilling operation

Continued overload

Slow Blinking GreenSlow Blinking Green

Drill motor shuts offDrill motor shuts off

Fast Blinking RedFast Blinking Red

"Smart Stop""Smart Stop"

“Smart Stop” stalls motorwhen overloaded.

“Smart Stop” stalls motorwhen overloaded.

Resume proper loadProper load Overload Resume proper loadProper load Overload

Drill motor will not turn onDrill motor will not turn on

LED load indicator

LED load indicator

Magnet malfunction

Slow Blinking Red

(AO-5575)

Motion sensor active

Slow Blinking Orange

Load Detector with “Smart-Stop/Rapid-Restart” Technology

60 mm60 mm

The use of Jetbroach cutters require the frameto be at the lowest position, while twist bitdrilling requires the appropriate amount ofelevation to be adjusted for safe operation.

Body Height Adjustment (WOJ-3200)

Built-in coolant tank to protect against damage (AO-5575)

1

4 5 6

7 8 9

2 3

*Twist drills are not provided with the one-touch drill adapter.

One-Touch Drill Adapter (WOJ-3200)

PNRef. No. Description Sales Unit WOJ-3200 AO-5575Applicable Model

TB07691TB07474TQ10581TB01098TB01507TB07696TB04374TB07690TB02536

123456789

1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

Chip Breaker Ass’yChip Breaker Ass’yJet Oiler No.3013Tube 4 x 7 x 3000 Ass’yCutting Oil 2LPipe Attachment Ass’ySupporting Magnet Ass’yOne-touch Drill AdapterSleeve 6.5 for Triangle Shank Drill BitOne-touch Type JETBROACH 25LOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50LOne-touch Type JETBROACH 75LOne-touch Type HI-BROACH 25LOne-touch Type HI-BROACH 50L

••••••••••

•••••••••••*50L for stacked plates


Safety mode

Two Speed Selection (AO-5575)

Speed can be changed to suit the typeand size of the cutter.

350 min-1

650 min-1

350 min-1

650 min-1

Model WOJ-3200• Max. 32 mm dia. x 50 mm deep

Model AO-5575• Max. 55 mm dia. x 75 mm deep

Feed handles can be positioned on the right orleft side for ease of drilling and mountingin confined spaces.

Optional one-touch drill adapter allows theuse of up to 13 mm twist drills to be usedin the original arbor.


13 14

Fully automatic drilling for increased productivityand reduced cost


ATRA ACE quick auto



• Proven Automatic Technology (self feeding, automatic return, load detection for speed and feed regulation)

The largest capacity drilling machinein the Nitto Kohki line. • Equipped with overload indicator with motor shut-off feature

• Oil Tank Ass'y• Cutting Oil 0.5L• Pilot Pin 08035• Side Handle• 3 mm Hex. Socket Screw Key




WA

min-1(rpm)W

mmN(kgf)

mmmkg

QA-4000

680

75050

756664 (680)82 x 172

418.5


CutterOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50LOne-touch Type HI-BROACH 25L

mm

115 V AC, 50/60 HZ

6.1

Hole Diameter17.5 to 40

-14 to 1516 to 18

220 - 240 V AC, 50/60 Hz

3.0

Plate Thickness9 to 35

-9 to 129 to 25

QA-6500220 - 240 V AC, 50/60 Hz

10104.5

400 / 75075

889800 (1000)100 x 200

526

Hole Diameter17.5 to 4017.5 to 65

18 to 35

Plate Thickness9 to 359 to 50

9 to 25

• 4 mm Hex. Socket Screw Key• 8 x 10 mm Spanner• Chain• Tool Box

• Oil Tank Ass'y• Cutting Oil 0.5L• Pilot Pin 08050• Side Handle• 3 mm Hex. Socket Screw Key

• 4 mm Hex. Socket Screw Key• 8 x 10 mm Spanner• Chip Stopper• Chain• Tool Box

• Cutting Oil 0.5L• Oil Cup Ass'y• Pilot Pin 12075• 3 pieces of Feed Handle• 2 mm Hex. Socket Screw Key• 2.5 mm Hex. Socket Screw Key• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• 6 mm Hex. Socket Screw Key• 8 mm Hex. Socket Screw Key• 7 x 8 mm Spanner• Chain• Tool Box


Magnet Power ConsumptionHoleCapacityMax. Stroke Magnet Holding PowerMagnet DimensionsPower Cord LengthMass (Weight)Accessories Included

WA

min-1(rpm)W

mmN(kgf)

mmmkg

A-100220 - 240 V AC, 50/60 Hz

16007.433080

12217640 (1800)

130 x 256550


CutterSide-lock Type JETBROACH 75L

Hole Diameter50 to 100 mm

Plate Thickness13 to 75 mm

215 mm454.5 mm

215 mm 407 mm

541 mm541 mm

215 mm454.5 mm

439 mm439 mm

215 mm 407 mm

PNRef. No. Description Sales Unit QA-4000 QA-6500Applicable Model

TB01507TB04374TB07696

123

1 piece1 piece1 piece1 piece1 piece1 piece1 piece

Cutting Oil 2LSupporting Magnet Ass’yPipe Attachment Ass’yOne-touch Type JETBROACH 35LOne-touch Type JETBROACH 50LOne-touch Type HI-BROACH 12LOne-touch Type HI-BROACH 25L

••••••

•••••

1 2 3

1 2

Built-in Motion Sensor

If any lateral movement or excess vibration is detected, both the drill and the feed motor stop. Nitto Kohki is the first company to incorporate this feature into magnetic base drills.

Step Feed

When cutting through difficult materials, the load sensor will automatically activate the Step Feed Program to help penetrate material.

Automatic Return

Once drilling is completed and the slug is ejected from the hole, the cutting bit is quickly retracted. This quick drill motor retraction allows the user to move onto the next hole more quickly.

Limit Switch

The ATRA ACE Automatic Drills utilize a limit switch that resets the machine when it retracts to the starting position after hole completion, also shuts down the motors in the event of an over-travel at the bottom of the stroke.

Automatic-feed Hole-cutting Procedure

Align the pilot pin with the center punch mark of the hole to be drilled. Attach the machine to the beam with the proper safety chain and engage the magnet. Lower the drill down from the top limit switch location to the point of the pilot pin making contact with the material and engage the motor.

Engage the clutch by pushing the handles in towards the drill and the motor will begin feeding automatically.

Slow start mechanism cuts smoothly through the mill scale. Then, speed and feed rate is controlled by the sensors to achieve efficient drilling.

After the hole is completed, the QA Series machines will quickly return and stop at the top of the stroke, ready for the next hole.

Automatic-feed Operation


PNRef. No. Description Sales UnitTB01507TA99027

12 1 piece

Cutting Oil 2LChainSide-lock Type JETBROACH 75L



575 mm

318 mm 705 mm

575 mm

318 mm 705 mm

Feed HandleON

Self Feeding & Load Detection

The feeding is controlled by an onboard microcomputer. The feed rate begins slowly and then increases to the appropriate speed for the cutter size and load condition. The load detector clearly shows the amount of resistance on the cutter at anytime. Red RedGreen Yellow Orange

ON STOPLOADLOAD DETECTOR

Replacement is quick and easy with ourunique push fit self-centering cutter system.



Two Speed Selection (QA-6500)

Speed can be changed to suitthe type and size of the cutter.

400 min-1 750 min-1

1 2 3 4

Model QA-4000• Max. 40 mm dia. x 35 mm deep

Non-CE

• Max. 100 mm dia. x 75 mm deepModel A-100 Non-CE

Model QA-6500• Max. 65 mm dia. x 50 mm deep

Non-CE

Chip Breaker


15 16

JETBROACH CUTTERS & HI-BROACH CUTTERSAnnular Cutters

BROACH HOLDERS

0605

008

050

Pilo

t Pin

50mm

TK01154TK01155TK01156TK01157TK01158TK01159TK00380TK00381TK00382TK00383TK00384TK00385TK00386TK00387TK00388TK00389TK00390TK00391TK00392TK00393TK00394TK01147TK00395TK00396TK00397TK00398TK00399TK00400TK00401TK00402TK00403TK00404TK00405TK00406TK00407TK00408TK00409TK00410TK00411TK00412TK00413TK00414TK00415TK00416TK00417TK00418TK00419TK00420TK00442TK00443TK00444TK00445TK00446TK00447TK00448TK00449TK00450TK00451TK00607TK00608TK00609TK00610TK00611

12131415161717.5181919.52020.52121.52222.52323.52424.52525.52626.5272829303132333435363738394041424344454647484950515253545556575859606162636465

LO-3

550

WO

J-32

00

AO-5

575

WA-

3500

WA-

5000

QA-

6500

•••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••

••••••••••••••••••••••••••••••

••••••••••••••••••••••••••••••••••••••••••••••••

JETBROACHOne-touch Type

mmdia.Depth PN

0807

5Pi

lot P

in

75mm

TK01036TK01003TK01004TK01005TK01006TK01007TK01008TK01009TK01010TK01011TK01012TK01013TK01014TK01015TK01016TK01017TK01018TK01019TK01020TK01021TK01022TK01023TK01024TK01025TK01026TK01027TK01028TK01029TK01030TK01031TK01032TK01033TK01034TK01035TK01112TK01113TK01114TK01115TK01116

17.51819202122232425262728293031323334353637383940414243444546474849505152535455

WA-

5000

••••••••••••••••••••••••••••••••••

AO-5

575

•••••••••••••••••••••••••••••••••••••••


mmdia.Depth PN

1207

5Pi

lot P

in

75mm

TJ17709TJ16651TJ16652TJ16653TJ16654TJ16655TJ16656TJ16657TJ16658TJ16659TJ16660TJ16661TJ16662TJ16663TJ16664TJ16665TJ16666TJ16667TJ16668TJ16669TJ16670TJ16671TJ16672TJ16673TJ16674TJ16675TJ16676TJ16677TJ16678TJ16679TJ16680TJ16681TJ16682TJ16683TJ16684TJ16685TJ16686TJ16687TJ16688TJ16689TJ16690TJ16691TJ16692TJ16693TJ16694TJ16695TJ16696TJ16697TJ16698TJ16699TJ16700

5051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100

A-10

0

•••••••••••••••••••••••••••••••••••••••••••••••••••

JETBROACHSide-lock Type

mmdia.Depth PN

0805

0Pi

lot P

in

50mm

TK01068TK00622TK00623TK00631TK00624TK00625TK00632TK00626TK00627TK00628

18222424.5252626.5283235

WO

J-32

00

AO-5

575

••••••••••

LO-3

550

••••••••••

••••••••••


mmdia.Depth PN

50L(W) for stacked plates.

50mm

TK00721TK00722TK00723TK00724TK00725TK00726TK00727TK00728TK00729TK00730TK00731TK00732TK00733TK00734TK00735TK00736TK00737TK00738TK00739TK00740TK00741TK00742TK00743TK00744TK00745TK00746TK00747TK00748TK00749TK00750TK00751TK00752TK00753TK00754TK00755TK00756TK00757TK00758TK00759TK00760TK00761

1213141516171819202122232425262728293031323334353637383940414243444546474849505152

AO-5

575

WA-

5000

Pilo

t Pin

•••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••

HI-BROACHOne-touch Type

mmdia.Depth PN

0605

008

50 /

0805

0

25mm

TK00698TK00699TK00700TK00701TK00702TK00703TK00335TK00336TK00337TK00338TK00339TK00340TK00341TK00342TK00343TK00344TK00345TK00346TK00347TK00348TK00349TK00351TK00352TK00353TK00354TK00355TK00356TK00357TK00359TK00361TK00704TK00705TK00706TK00707TK00708TK00709TK00710TK00711TK00712TK00713TK00714TK00715TK00716TK00717TK00718TK00719TK00720

12131415161717.5181919.5202121.52222.52323.52424.525262728293031323334353637383940414243444546474849505152

AO-5

575

WA-

3500

WA-

5000

QA-

4000

QA-

6500

CLA-

2720

Pilo

t Pin

•••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••••••

••••••

••••••••••••••••••••••••••••

•••••••••••••••••••••••

HI-BROACHOne-touch Type

mmdia.Depth PN

0602

508

025

25mm

0803

506

025

35mm

TK01148TK01149TK01150TK01151TK01152TK01153TK00301TK00302TK00303TK00304TK00305TK00306TK00307TK00308TK00309TK00310TK00311TK00312TK00313TK00314TK00315TK00316TK01169TK00317TK00318TK00319TK00320TK00321TK00322TK00323TK00324TK00325TK00326TK00328TK00602TK00603TK00604TK00605TK00606

12131415161717.51818.51919.52020.52121.52222.52323.52424.52525.52626.52728293031323334353637383940

WO

J-32

00

AO-5

575

WA-

3500

WA-

5000

QA-

4000

QA-

6500

•••••••••••••••••••••••••••••••

LO-3

550

••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••

CLA-

2720

Pilo

t Pin

••••••••••••••••••••••••••

••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••


mmdia.Depth PN

For stacked plates.Specifications

HoleCapacity

Feed SpeedCircumferential Speed

25L : 12 - 52 dia.---

25L : 25 dia.---

--

50L : 12 - 52 dia.---

50L : 50 dia.-

--

50L(W) : 18,22,24 - 26.5,28,32, and 35 dia.

--

50L(W) : 50 dia.-

--

75L : 17.5 - 55 dia.----

75L : 75 dia.

HI-BROACHOne-touch Type/25L

HI-BROACHOne-touch Type/50L

JETBROACHOne-touch Type/25,35,50L

JETBROACHOne-touch Type/50L(W)

JETBROACHOne-touch Type/75L

JETBROACHSide lock Type/75L

--

75L : 50 - 100 dia.----

75L : 75 dia.

25L : 12 - 17 dia.35L : 17.5 - 40 dia.50L : 12 - 65 dia.

-25L : 25 dia.35L : 35 dia.50L : 50 dia.

-

Hole Diameter

Plate Thickness

0.02 - 0.115 - 35 (mild steel) 35 - 50 (mild steel)

mm

mm/revm/min

65 mm(12 - 19.5 dia.)58 mm(20 - 52 dia.)

65 mm(25L)73 mm(35L)95 mm(12 - 17 × 50L)90 mm(17.5 - 65 × 50L)

156 mm86 mm 117 mm90 mm65 mm

(12 - 19.5 dia.)58 mm(20 - 52 dia.)

65 mm(25L)73 mm(35L)95 mm(12 - 17 × 50L)90 mm(17.5 - 65 × 50L)

156 mm86 mm 117 mm90 mm

SpecificationsMorse Taper No.ModelPNCutterCutter Diameter

Pilot Pin

163 mm 182 mm 248 mm 232 mm163 mm 182 mm 248 mm 232 mm

M.T.No.2BHM-02035

TB00390

17.5 - 35 dia.08025

M.T.No.3BHM-03050

TB00392

19 - 52 dia.0850/08050

HBO-25L HBO-50L JBO-35L17.5 - 40 dia.

08035Included

JBO-50L17.5 - 65 dia.

JBO-50L(W)18 - 35 dia.

HBO-25L

Optional

JBO-35L17.5 - 35 dia.

08035Included Optional

08050Optional

BHM-13075TB00352

JBS-75L50 - 100 dia.

12075 Included

M.T.No.4BHM-14075

TB00354

12 - 17 dia.06025

12 - 18 dia.06050

17.5 - 52 dia.08025

12 - 17 dia.06025

BHM-02035 BHM-03050 BHM-13075 BHM-14075

Pilot Pin06025 PN : TK01167

91 mm8 dia.

112 mm8 dia.

192 mm

6 dia.

8 dia.76 mm

5 dia.6.35 dia.

112 mm

7 dia.8 dia.

100 mm

133 mm

8 dia.

81 mm

5 dia.6.35 dia.

08025 PN : TJ12696

06050 PN : TK01166

0850 PN : TK00802

08050 PN : TJ16019

08035 PN : TJ15859

08075 PN : TJ17436

12075 PN : TA9A207

Industrial cutters for faster and better finished holes• The Spring-loaded pilot pin picks up the hole location quickly, and ejects the slug

automatically at the end of cut• Available with No. 2 - 4 Morse taper shanks• Oil cup complete Ass'y (PN TB00350) is available as an optional attachment which

provides continuous and adjustable cutting oil flow to the cutting area

• No dead point• Peripheral cutting• Dramatically reduce cutting resistance• Available diameter size: 12 - 100 mm

BROACH CUTTERS are far better than twist drillsTest Drilling is very often the only way to determine the machinability of difficult materials.Use a small size cutter wherever possible in order to minimize trial costs.

Sales Unit : 1 Piece

Sales Unit : 1 Piece HBO : HI-BROACH One-touch Type JBO : JETBROACH One-touch Type JBS : JETBROACH Side-lock Type

P U N C H I N G P U N C H I N G

17 18

Double acting hydraulic system allows automatic andinching (manual mode) operation.

Portable Double-Acting Hydraulic Puncher

SELFER ACE• Applicable for both mild steel and stainless steel punching

HYDRAULIC PUMP for SELFER ACE

Punch, return, and reset operations are fully automatic.An emergency switch returns the punch at any time.

Portable Single-Acting Hydraulic Puncher

SELFER HA Type• Will punch both round and oblong holes

SpecificationsModelPower Source (Single Phase)Max. Output PressureOutputAt No-loadAt 68.65 MPaMotorReservoir CapacityDischarge PortElectro-Magnetic ValveMass (Weight)

MPa (kgf/cm2)

L/minL/min

L

kg

50 Hz1.200.55

60 Hz1.440.66

HPD-05115 V / 230 V AC

68.65 (700)

0.4 kW 4P4.0

Rc 3/84 way 3 position valve

32.5

PN Description Sales UnitTA96534TP05184TA93778TA9B044TP05777TA95307TA94386TA92729TA96342TA99037TQ01279

1 piece

Hose Kit Ass’y 5 mUltra-high Pressure Hose 5 mSwitch Cord Ass’y 5 mHose Kit Ass’y 10 mUltra-high Pressure Hose 10 mSwitch Cord Ass’y 10 mFoot Switch Ass’y4L Oil CanHook Clamp Ass’y for HA07-1624 and HA11-1624Lock Nut Ass’y for 25 mm PunchHex. Socket Head Screw 8 x 14for Securing Oblong Hole D Dies


323 mm

462.5 mm

323 mm

422 mm422 mm

360 mm360 mm

429.5 mm429.5 mm

382 mm382 mm

462.5 mm

381 mm

524.1 mm

418 mm

545.6 mm

436 mm

545.6 mm

381 mm

524.1 mm

418 mm

545.6 mm

436 mm

545.6 mm

426.4 mm

420 mm420 mm

426.4 mm

246 mm246 mm

HYDRAULIC PUMP for SELFER HA Type

SpecificationsModelPower Source (Single Phase)Max. Output PressureOutputAt No-loadAt 68.65 MPaMotorReservoir CapacityDischarge PortMass (Weight)

MPa (kgf/cm2)

L/minL/min

L

kg

50 Hz1.200.55

60 Hz1.440.66

SC-05115 V / 230 V AC

68.65 (700)

0.4 kW 4P4.0

Rc 3/827.5

328 mm328 mm

405 mm 174 mm405 mm 174 mm

PN Description Sales UnitTB02506TP05184TB02390TP05777TB02545TB02141TA92729TB02142TA99037TQ01279

1 piece

Hose Kit Ass’yUltra-high Pressure Hose 5 mSwitch Cord Ass’y 5 mUltra-high Pressure Hose 10 mSwitch Cord Ass’y 10 mFoot Switch Ass’y4L Oil CanHook Clamp Ass’yLock Nut Ass’y for 25 mm PunchHex. Socket Head Screw 8 x 14for Securing Oblong Hole D Dies


• D Punch 22 (Installed)• D Die 22 (Installed)• Sub Handle• Ultra-high Pressure Hose

• Hose Cord Ass'y• Chip Guard Ass'y• Spanner• 12 mm Spanner

• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• Tool Box

SpecificationsModelMax. Throat DepthPunchingCapacity

Hole Making time

Allowable Max. PressureMax. OutputRam StrokeMass (Weight)Accessories Included

mmmmsec.sec.

MPa (kgf/cm2)kN (tf)

mmkg

HS11-1624110

30

MaterialMax. Punching Thickness*Max. Punching Diameter

Punching TimeReturning Time

Mild Steel1624

Stainless Steel624

HS07-162470

30

Mild Steel1624

11.85.7

68.65 (700)464 (47)

25

Stainless Steel624

HS06-132260

7.93.4

68.65 (700)367 (37)

2120.5

Mild Steel1322

Stainless Steel622

*Mild steel : Maximum punching thickness must be calculated by the equation 0.8 x punching diameter.*Stainless steel : Maximum punching thickness must be calculated by the equation 0.5 x punching diameter. For the details see the instruction manual.

*An optional CE model is available without auto-return function.

*An optional CE model is available without auto-return function.

• D Punch 22 (Installed)• D Die 22 (Installed)• Sub Handle

• Hose Cord Ass'y• Spanner• 4 mm Hex. Socket Screw Key

• Tool Box

SpecificationsModelMax. Throat DepthPunchingCapacity

Hole Making TimeAllowable Max. PressureMax. OutputRam StrokeMass (Weight)Accessories Included

mmmmsec.

MPa (kgf/cm2)kN (tf)

mmkg

HA11-1624110

35.5

MaterialMax. Punching Thickness*Max. Punching Diameter

1624

16.568.65 (700)

431 (44)25

HA07-162470

Mild Steel

28.5

HA06-132260

1322

10.568.65 (700)

304 (31)21

21.5

*Mild steel : Maximum punching thickness must be calculated by the equation 0.8 x punching diameter. For the details see the instruction manual.

Dimension from Edge to Punch Center

24 mm

Dimension from Edge to Punch Center

Model HS06-1322• Max. punching thickness : 13 mm• Max. punching diameter : 22 mm• Max. throat depth : 60 mm

Non-CE*Model HS07-1624• Max. punching thickness : 16 mm• Max. punching diameter : 24 mm• Max. throat depth : 70 mm

Non-CE* Model HA11-1624• Max. punching thickness : 16 mm• Max. punching diameter : 24 mm• Max. throat depth : 110 mm

Non-CE Model HA07-1624• Max. punching thickness : 16 mm• Max. punching diameter : 24 mm• Max. throat depth : 70 mm

Non-CE Model HA06-1322• Max. punching thickness : 13 mm• Max. punching diameter : 22 mm• Max. throat depth : 60 mm

Non-CEModel HS11-1624• Max. punching thickness : 16 mm• Max. punching diameter : 24 mm• Max. throat depth : 110 mm

Non-CE*

Model HPD-05• Double-acting

Non-CE* Model SC-05• Single-acting

Non-CE

A BHS11-1624HS07-1624HS06-1322

12710584

1349485

A

B

A BHA11-1624HA07-1624HA06-1322

1119383

1349484

24 mm

A

B

P U N C H I N G

19

Self-contained hydraulic punch shows its power inmaking round or elongated holes in flat bar,angle bar or channel iron.

Electrically Operated Hydraulic Puncher

HANDY SELFER

• E Punch 15 (Installed)• E Die 15A• E Die 15B (Installed)• Sub Handle• 2.5 mm Hex. Socket Screw Key

• 4 mm Hex. Socket Screw Key• 10 x 12 mm Spanner• Auxiliary Oil 40 cc• Tool Box• Spanner 8

• EL Punch 18 (Installed)• EL Die 18A• EL Die 18B (Installed)• Sub Handle• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key

• 5 mm Hex. Socket Screw Key• 10 x 12 mm Spanner• Stand• Auxiliary Oil 40 cc• Tool Box

SpecificationsModelPower Source (Single Phase)Max. Throat DepthMotor

Punching Capacity

Punching timePower Cord LengthMass (Weight)Accessories Included

WA

mmmm

sec (single pass)mkg

E25-0615220 - 240 V AC, 50/60 Hz

253051.4

1564

2.47.0

Rated Power ConsumptionRated CurrentMaterialMax. Punching DiameterMax. Punching Thickness

E55-0619

55670

1962

2.414

115 V AC, 50/60 Hz

6.0

220-240 V AC, 50/60Hz

3.0

340.5 mm

357 mm

420 mm

368 mm

340.5 mm

357 mm

420 mm

368 mm

Mild Steel

PN Description Sales UnitTB00800 1 pieceStand Ass'y

Optional Accessory (E25-0615)

E Die and EL Die ModelPunching Thickness (mm)

Round Hole E Die A (for Thin Sheets)Round Hole E Die B (for Thick Sheets)Round Hole EL Die A (for Thin Sheets)Round Hole EL Die B (for Thick Sheets)Round Hole EL Die C (for Channel Iron)

Mild Steel2 to 3.24 to 6

2 to 3.24 to 67 to 8

Stainless SteelMax. 3Max. 4Max. 3Max. 4

-

E25-0615

E55-0619

Die Selection

A= 7

5 - 1

25

t =Plate thickness

B=40 - 65

t1 B - t12

Punching Dia.

75 x 40 t7100 x 50 t7.5125 x 65 t8

10 OD 11 OD 12 OD 13 OD 14 OD 15 OD 16 OD

Punching Capacity in Channel Iron (E55-0619)

Size

E25-0615

E55-0619

10

5

10

5

12

6

12

6

10

6.5

10

6.5

13

6.5

13

6.5 8.5

13

8.5

13

10

6.5

10

6.5

13

6.5

13

6.5 8.5

13

8.5

13

8.5

17

8.5

17

9

13.5

9

13.5

10

15

10

15

11

16.5

11

16.5

9

18

9

18

12

18

12

18

13

19.5

13

19.5

10

20

10

20

14

21

14

21

Oblong Hole Size

unit : mm

Model E25-0615• Double insulation• E punch and E die• Max. punching thickness : 6mm• Max. punching diameter : 15 mm • Max. throat depth : 25 mm

Non-CE Model E55-0619• EL punch and EL die• Max. punching thickness : 6mm• Max. punching diameter : 19 mm • Max. throat depth : 55 mm

Non-CE

20

P U N C H E S & D I E S

Punches & Dies for SELFER PuncherOptional Accessories

PN Description

TQ01279

TA99037

Hex. Set Screw 8 x 14for Securing Oblong Hole DiesLock Nut Ass'y for D Punch 25

Sales Unit : 1 Piece

FOR E55-0619

PN

Oblong hole EL Punch

Size

Oblong hole EL Die(Type A for thin sheets)

Oblong hole EL Die(Type B for thick sheets)

TK00242TK00243TK00244TK00245TK00246TK00247TK00248TK00249TK00250TK00251TK00252TK00253

EL Punch 10 x 6.5EL Punch 13 x 6.5EL Punch 13 x 8.5EL Punch 13.5 x 9EL Punch 15 x 10EL Punch 16.5 x 11EL Punch 17 x 8.5EL Punch 18 x 9EL Punch 18 x 12EL Punch 19.5 x 13EL Punch 20 x 10EL Punch 21 x 14

TK00254TK00255TK00256TK00257TK00258TK00259TK00260TK00261TK00262TK00263TK00264TK00265

EL Die 10 x 6.5AEL Die 13 x 6.5AEL Die 13 x 8.5AEL Die 13.5 x 9AEL Die 15 x 10AEL Die 16.5 x 11AEL Die 17 x 8.5AEL Die 18 x 9AEL Die 18 x 12AEL Die 19.5 x 13AEL Die 20 x 10AEL Die 21 x 14A

PN Size PN SizeTK00266TK00267TK00268TK00269TK00270TK00271TK00272TK00273TK00274TK00275TK00276TK00277

EL Die 10 x 6.5BEL Die 13 x 6.5BEL Die 13 x 8.5BEL Die 13.5 x 9BEL Die 15 x 10BEL Die 16.5 x 11BEL Die 17 x 8.5BEL Die 18 x 9BEL Die 18 x 12BEL Die 19.5 x 13BEL Die 20 x 10BEL Die 21 x 14B

22

30.5

EL Punches

40

Front view ofEL Dies Type A, B & C

32

22.5

Side face ofEL Dies Type A, B & C

PN

Round hole EL Punch

Size

Round hole EL Die(Type A for thin sheets)

Round hole EL Die(Type B for thick sheets)

TK00193TK00194TK00195TK00196TK00197TK00198TK00199TK00200TK00201TK00202TK00203TK00204TK00205TK00278TK00180

EL Punch 6EL Punch 6.5EL Punch 8EL Punch 8.5EL Punch 10EL Punch 11EL Punch 12EL Punch 13EL Punch 14EL Punch 15EL Punch 16EL Punch 17EL Punch 18EL Punch 18.5EL Punch 19

TK00208TK00209TK00210TK00211TK00212TK00213TK00214TK00215TK00216TK00217TK00218TK00219TK00220TK00279TK00181

EL Die 6AEL Die 6.5AEL Die 8AEL Die 8.5AEL Die 10AEL Die 11AEL Die 12AEL Die 13AEL Die 14AEL Die 15AEL Die 16AEL Die 17AEL Die 18AEL Die 18.5AEL Die 19A

PN Size PN SizeTK00222TK00223TK00224TK00225TK00226TK00227TK00228TK00229TK00230TK00231TK00232TK00233TK00234TK00280TK00182

EL Die 6BEL Die 6.5BEL Die 8BEL Die 8.5BEL Die 10BEL Die 11BEL Die 12BEL Die 13BEL Die 14BEL Die 15BEL Die 16BEL Die 17BEL Die 18BEL Die 18.5BEL Die 19B

Round hole EL Die(Type C for channel iron)

PN Size----

TK00235TK00236TK00237TK00238TK00239TK00240TK00241

----

----

EL Die 10CEL Die 11CEL Die 12CEL Die 13CEL Die 14CEL Die 15CEL Die 16C

----

FOR HS06-1322/HS07-1624/HS11-1624/HA06-1322/HA07-1624/HA11-1624

• TA99037 Lock Nut Ass'y is required for D Punch 25

30

60

D Punches

42

16.5

D Dies

PN

Round hole D Punch

Size

Round hole D Die

TJ10778TJ11088TJ06700TJ06698TJ06696TJ06694TJ06692TJ06611TJ06690TJ06688TJ06686TJ06609TJ06684TJ06682TJ06680TJ06607TJ06678TJ07979TJ06676TJ06674TJ06566TJ07748TJ10061

D Punch 8D Punch 9D Punch 10D Punch 11D Punch 12D Punch 13D Punch 14D Punch 14.5D Punch 15D Punch 16D Punch 17D Punch 17.5D Punch 18D Punch 19D Punch 20D Punch 20.5D Punch 21D Punch 21.5D Punch 22D Punch 23D Punch 23.5D Punch 24D Punch 25

TJ10779TJ11089TJ06701TJ06699TJ06697TJ06695TJ06693TJ06612TJ06691TJ06689TJ06687TJ06610TJ06685TJ06683TJ06681TJ06608TJ06679TJ07980TJ06677TJ06675TJ06569TJ07749TJ10062

D Die 8D Die 9D Die 10D Die 11D Die 12D Die 13D Die 14D Die 14.5D Die 15D Die 16D Die 17D Die 17.5D Die 18D Die 19D Die 20D Die 20.5D Die 21D Die 21.5D Die 22D Die 23D Die 23.5D Die 24D Die 25

PN Size

FOR HS06-1322/HS07-1624/HS11-1624/HA06-1322/HA07-1624/HA11-1624

PN

Oblong hole D Punch

Size

Oblong hole D Die Oblong hole Jig

*TA99037 Lock Nut Ass'y is required for Oblong hole D Punch 25 x 9 / 12 / 14 / 18

TJ13229TJ13230TJ13231TJ13232TJ13233TJ13234TJ13235TJ13236TJ13237

D Punch 16 x 8D Punch 18 x 9D Punch 20 x 10D Punch 22 x 11D Punch 24 x 12D Punch 25 x 9*D Punch 25 x 12*D Punch 25 x 14*D Punch 25 x 18*

TJ13238TJ13239TJ13240TJ13241TJ13242TJ13243TJ13244TJ13245TJ13246

D Die 16 x 8D Die 18 x 9D Die 20 x 10D Die 22 x 11D Die 24 x 12D Die 25 x 9D Die 25 x 12D Die 25 x 14D Die 25 x 18

PN Size PN SizeTK00455TK00456TK00457TK00458TK00459TK00460TK00461TK00462TK00463

Jig 16 x 8Jig 18 x 9Jig 20 x 10Jig 22 x 11Jig 24 x 12Jig 25 x 9Jig 25 x 12Jig 25 x 14Jig 25 x 18

Oblonghole Punch

Roll Pin

Jig

Oblong hole Die

FOR E25-0615

16

30.5

E Punches

35

Front view ofE Dies Type A

35

Front view ofE Dies Type B

24

Side face ofE Dies Type A

21 : over or equal 8 dia.(19 : under 8 dia.)

27

Side face ofE Dies Type B

21 : over or equal 8 dia.(19 : under 8 dia.)

PN

Round hole E Punch

Size

Round hole E Die(Type A for thin sheets)

Round hole E Die(Type B for thick sheets)

TK00100TK00102TK00143TK00105TK00146TK00111TK00149TK00117TK00120TK00123TK00097TK00167TK00428

E Punch 4E Punch 5E Punch 5.5E Punch 6E Punch 6.5E Punch 8E Punch 8.5E Punch 10E Punch 11E Punch 12E Punch 13E Punch 14E Punch 15

TK00101TK00103TK00144TK00106TK00147TK00112TK00150TK00118TK00121TK00124TK00098TK00168TK00288

E Die 4AE Die 5AE Die 5.5AE Die 6AE Die 6.5AE Die 8AE Die 8.5AE Die 10AE Die 11AE Die 12AE Die 13AE Die 14AE Die 15A

PN Size PN Size -TK00104TK00145TK00107TK00148TK00113TK00151TK00119TK00122TK00125TK00099TK00169TK00429

-E Die 5BE Die 5.5BE Die 6BE Die 6.5BE Die 8BE Die 8.5BE Die 10BE Die 11BE Die 12BE Die 13BE Die 14BE Die 15B

PN

Oblong hole E Punch

Size

Oblong hole E Die(Type A for thin sheets)

Oblong hole E Die(Type B for thick sheets)

TK00126TK00158TK00129TK00152TK00155

E Punch 10 x 5E Punch 10 x 6.5E Punch 12 x 6E Punch 13 x 6.5E Punch 13 x 8.5

TK00127TK00159TK00130TK00153TK00156

E Die 10 x 5AE Die 10 x 6.5AE Die 12 x 6AE Die 13 x 6.5AE Die 13 x 8.5A

PN Size PN SizeTK00128TK00160TK00131TK00154TK00157

E Die 10 x 5BE Die 10 x 6.5BE Die 12 x 6BE Die 13 x 6.5BE Die 13 x 8.5B

Sales Unit

1 piece

1 set

21 22

NITTO KOHKI Tools for Professional Use

Myton

P35 - 36

Belton

P37 - 40

Grinding & Sanding

Super Saw

P48

Cutting

Hand Beveler

P25

Mini Beveler

P25 - 27

Circuit Beveler

P26 - 28

Chamfering

Free Sander

P41

Line Sander

P42

Orbital Sander

P43

Palm Orbital Sander

P43

Flat Sanding

Air Sonic

P44 - 45

Precision Grinding

Micro Air Hand

P47

Filing

Burr Cutter

P47

Deburring

Air Drill

P48

DrillingScaling & Chipping

Machining & Molding

Sheet-metal Working

Welding

Painting

Steel Fabricating &Can Manufacturing

Molding & Die-casting

Bridges & Ship Building

Plant Construction & Piping

Wood Working & Art

Automotive & Painting

Construction

: Best Suited: Suited: Best Suited: Suited

Auto Chisel

P31

P30

Air Chipper

Jet Chisel

P33 - 34

Super Kelen

P32

Super Hand

P46

Super Hand Light

P45

C H A M F E R I N G

23 24

C H A M F E R I N G

1C

2C

3C

7C

15C

0.5C

3C

PneumaticPneumaticElectricElectric Applicable to stainless steel chamfering

Exclusive for 3 mmRadius Chamfering

For bridge and shipbuilding applications

Chamfering steel platesEMB-0307B

For curved edgesCBR-03

PneumaticPneumatic

PneumaticPneumaticElectricElectric

1.5C

For straight edgesModel HB-15BUp to 15 mm Chamfer(Max. chamfering capacity for one-cut is 7C)

For straight edgesModel EMB-0307BUp to 7 mm Chamfer or 2, 3, 4 mm Radius

For straight edgesModel EMB-0307BUp to 3 mm Chamfer or2, 3, 4 mm Radius

For straight edgesModel AMBL-0307/ AMB-0307Up to 7 mm Chamfer or 2, 3, 4 mm Radius

For straight edgesModel AMBL-0307/ AMB-0307Up to 3 mm Chamfer or2, 3, 4 mm Radius

For straight edgesModel MB-03AUp to 3 mm Chamfer or 2 and 3 mm Radius

For curved edgesModel ECB-0203Up to 3 mm Chamfer or 2 and 3 mm Radius

For curved edgesModel ECB-0203Up to 1.5 mm Chamfer or 2 mm Radius

For curved edgesModel CB-02Up to 2 mm Chamfer or 2 mm Radius

For curved edgesModel CB-01Up to 1 mm Chamfer

With locking throttle leverModel CBR-03

For curved edgesModel CB-01Up to 0.5 mm Chamfer

Max. ChamferingCapacity

for Mild Steel Max. ChamferingCapacity

for Stainless Steel

Guide for Selecting Portable Chamfering ToolsSelect the model according to the conditions of chamfering capacity, electrical or pneumatic tool required, and materials to be chamfered.

SpecificationsModelPower Source (Single Phase)

Rated Power ConsumptionDuty Cycle No-load Speed

Chamfering Capacity

Chamfer Angle Mass (Weight)Optional Accessories

HB-15B220 - 240 V AC 50 Hz110 - 120 V AC 60 Hz

910

2750 (220 - 240 V)3340 (110 - 120 V)

Up to 15 mm Chamfer(Initial chamfer is 7 mm.)

-

14

220 - 240 V AC, 50/60 Hz

1100

Up to 7 mm Chamfer2, 3, 4 mm Radius


3.9

EMB-0307BELECTRIC

220 - 240 V AC 50/60 Hz100 - 110 V AC 50/60 Hz

430

-

MB-03A

220 - 240 V AC 50/60 Hz

450

10000

Up to 1.5 mm Chamfer 2 mm Radius

ECB-0203

Wmin

min-1(rpm)

kg

Mild Steel

Stainless Steel

11000

30

Up to 3 mm Chamfer2 and 3 mm Radius

45°2.5

Continuous

15° - 45°

• TA9A728 Pipe Plate Ass’y for Pipe Outer Edge Beveling (Pipe O.D. 125 to 800 mm)

• TA9A594 Inner Head Ass’y for Pipe Inner Edge Beveling (Minimum Inner Pipe Diameter : 100 mm)

• TB02539 Attachment for Pipe Outer Edge Beveling (Pipe O.D. 80 to 200 mm)*Pipe O.D. more than 200 mm can be chamfered with the standard accessory.

• TB03097 Plate Ass’y for Straight Edge Beveling

HAND BEVELERModel HB-15B• Mild steel:15C

MINI BEVELERModel MB-03A• Mild steel:3C, 3R

MINI BEVELERModel EMB-0307B• Mild steel:7C, 4R• Stainless steel:3C, 4R

CIRCUIT BEVELERModel ECB-0203• Mild steel:3C, 3R• Stainless steel:1.5C, 2R

For further information,see the following pages.

P25 for Model HB-15BP25 for Model EMB-0307BP26 for Model MB-03AP26 for Model ECB-0203

SpecificationsModelAir PressureAir Consumption (No Load)Free SpeedChamfering Capacity

Chamfer Angle Mass (Weight)Optional Accessories

AMBL-0307/AMB-0307

0.914000



15° - 45°2.9

CB-01PNEUMATIC

CB-02 CBR-03MPa (kgf/cm2)

m3/minmin-1(rpm)

kg

Mild Steel

Stainless Steel

0.6 (6)

45°

• TB02539 Attachment for Pipe Outer Edge Beveling (Pipe O.D. 80 to 200 mm)

• TB09143 Plate Ass’y for Straight Edge Beveling

• TB09140 Guide Plate 78 Ass’y for More Stable Operation

• TB02437 Thin Plate Attachment Ass’y

MINI BEVELERModel AMBL-0307 (Lever)Model AMB-0307 (Ring)• Mild steel:7C, 4R• Stainless steel:3C, 4R

CIRCUIT BEVELERModel CB-02• Mild steel:2C, 2R

CIRCUIT BEVELERModel CB-01• Mild steel:1C• Stainless steel:0.5C

CIRCUIT BEVELERModel CBR-03• Mild steel:3R

For further information,see the following pages.

P27 for Model AMBL/AMB-0307P27 for Model CB-01P28 for Model CB-02P28 for Model CBR-03

0.415000

Up to 2 mm Chamfer 2 mm Radius

1.8

0.1528000

Up to 1 mm Chamfer

Up to 0.5 mm Chamfer

0.5

0.6512000

3 mm Radius

-2

-

-

• TB02862 Dust Box Ass’y Used with TB03097 Plate Ass’y

• TB02857 Guide Sleeve 24 mm Dia. Ass’y

*For further information of optional Beveler accessories, see p.29.

C H A M F E R I N G

25

220 mm220 mm

330 mm (115V)326 mm (230V)330 mm (115V)326 mm (230V)

SpecificationsModelPower Source (Single Phase)Rated Power ConsumptionRated CurrentDuty CycleNo-load SpeedChamfering Capacity (Mild Steel)Chamfer AnglePower Cord Length Mass (Weight)

WA

minmin-1(rpm)

mkg

110 - 120 V AC, 50/60 Hz

10.5

3350

220 - 240 V AC, 50/60 Hz

4

2750

HB-15B

910

Continuous

Up to 15 mm Chamfer15° - 45°

515

Chamfering I-beamsChamfering steel plates Chamfering I-beamsChamfering steel plates

Chamfering up to 15C

Model HB-15B

Portable Chamfering Tools

HAND BEVELER

15CMild Steel

7C

Mild Steel4R

3C

Stainless Steel4R

• Ideal for plate, pipe, and tube chamfering for welding preparation• Chamfer width up to 15 mm at 45° angle using multiple passes • Indexable inserts have four working edges for good economy• Finishes a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• High speed cutting action minimizes material hardening

Model EMB-0307B

Handy Electric Chamfering Tool

MINI BEVELERDesigned to chamfer stainless and mild steel

Double insulation

• Ideal for edge chamfering pipe, tube, and plate• Adjustable to chamfer angles from 15° to 45°• Chamfer width up to 7 mm on mild steel.• Uses indexable carbide inserts• Swarf and chip collection box included

317 mm317 mm180 mm180 mm

188 mm188 mm

SpecificationsModelPower Source (Single Phase)Rated Power ConsumptionRated CurrentDuty Cycle No-load SpeedChamfering Capacity

Chamfer AnglePower Cord Length Mass (Weight)

WA

minmin-1(rpm)

mkg

EMB-0307B220 - 240 V AC, 50/60 Hz

11005

Continuous11000

Up to 7 mm Chamfer or 2, 3, 4 mm RadiusUp to 3 mm Chamfer or 2, 3, 4 mm Radius

15° - 45°2.53.9

Mild SteelStainless Steel

XChamfer

YStraight

45˚30˚15˚

X1594

Y15

15.515.4

Mild Steel(mm)Chamfer Angle

Chamfer Angle and Width

Round

Radius2, 3, 4 2, 3, 4Mild Steel(mm) Stainless Steel(mm)

RadiusXChamfer

Y

StraightZ

X7

3.81.5

Y7

6.65.6

Z9.97.65.8

Z4.24.43.9

X3

2.21

Y3

3.83.8

Mild Steel(mm) Stainless Steel(mm)Chamfer Angle, Width and Radius

45˚30˚15˚

Chamfer Angle

• 12 pieces of Indexable Insert 12.7 (Installed)• 12 pieces of Indexable Insert 12.7• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• 6 mm Hex. Socket Screw key• 24 x 27 mm Spanner

Accessories Included• Hook Spanner 25 - 28• 3 mm T Wrench• Roller Bracket Ass’y• Spacer A• Spacer B• Plate B

• Indexable Insert with Hole 12.7 (Installed)• Indexable Insert Set Screw 4 x 7 (Installed)• Indexable Insert with Hole 12.7• Indexable Insert Set Screw 4 x 7• Dust Box Ass'y• Carbon Brush Ass'y

Accessories Included• 2 pieces of Hex. Nut M8• 2 pieces of Hex. Socket Set Screw 8 x 25• 3 pieces of Pan Head Screw 5 x 10• 4 mm Hex. Socket Screw Key• Spanner T-15D

26

C H A M F E R I N GCompact and light for speed chamferingHandy Electric Chamfering Tool

MINI BEVELER

3C

Mild Steel3R

1.5C

Stainless Steel2R

3C

Mild Steel3R

Double insulation

Model ECB-0203

Electric Radial Chamfering Tool

CIRCUIT BEVELERSmoothly chamfering straight and curved edges

Double insulation

• Designed to chamfer stainless and mild steel• Minimum chamfering plate thickness is 2 mm (Max. 0.5 mm Chamfer)• Indexable inserts have four working edges for good economy• An optional straight plate allows chamfering a straight edge shoulder

278 mm

150 mm

108 mm

278 mm

150 mm

108 mm

• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mm

• An optional inner head ass'y allows chamfering a pipe of inner diameter larger than 100 mm (50R)

Chamfering curved edgesChamfering straight edges

Chamfering range of operationMin. Diameter Min. Radius Min. Depth Min. Thickness

15 m

m 7.5 mm 18 mm2 mm

SpecificationsModelPower Source (Single Phase)Rated Power ConsumptionRated CurrentDuty CycleNo-load SpeedChamfering Capacity (Mild Steel)Chamfer AnglePower Cord Length Mass (Weight)

WA

minmin-1(rpm)

mkg

110 V AC, 50/60 Hz

4.5

230 V AC, 50/60 Hz

2

MB-03A

430

3011000

Up to 3 mm Chamfer or 2 mm and 3 mm Radius45°2.52.5

• Indexable Insert 9.525 R2 (Installed)• Indexable Insert 9.525• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key

Accessories Included• Spanner T-9F• Hex. Nut• 2 pieces of Hex. Socket Set Screw 8 x 25

400 mm

138 mm138 mm

400 mm

• Indexable Insert with Hole 12.7 (Installed)• Indexable Insert Set Screw 4 x 7 (Installed)• Indexable Insert with Hole 12.7• Indexable Insert Set Screw 4 x 7• Sub Handle• Grip Guard

Accessories Included• Ball Bearing 687zz• 5 mm Hex. Socket Screw Key• 8 x 10 mm Spanner• Spanner T-150• Gauge C3

SpecificationsModelPower Source (Single Phase)Rated Power ConsumptionRated CurrentDuty Cycle No-load SpeedChamfering Capacity

Chamfer AnglePower Cord Length Mass (Weight)

WA

minmin-1(rpm)

mkg

ECB-0203220 - 240 V AC, 50/60 Hz

4502.130

11000Up to 3 mm Chamfer or 2* and 3 mm Radius

Up to 1.5 mm Chamfer or 2* mm Radius45°2.52.5


*In case of 3 mm Radius, an optional indexable Insert for 3R is necessary, and 2 mm Radius, an optional guide sleeve 24 mm dia. and indexable insert for 2R are necessary.

Round

Radius2, 3Mild Steel(mm)

RadiusXChamfer

YStraight

45˚X3

Y3

Mild Steel(mm)Chamfer Angle, Width and Radius

Round

RadiusXChamfer

YStraight

45˚ 2, 3 2

Mild Steel(mm)

Stainless Steel(mm)

RadiusX3

Y3

X1.5

Y1.5

Mild Steel(mm) Stainless Steel(mm)Chamfer Angle, Width and Radius

Model MB-03A Non-CE

C H A M F E R I N G

27

• 2 pieces of Indexable Insert 8.4 (Installed)• 2 pieces of Indexable Insert Set Screw (Installed)• 2 pieces of Indexable Insert Set Screw• 2 mm Hex. Socket Screw Key for Chamfering Adjustments• Spanner T-6F for Replacement of Indexable Insert • Bushing R 1/4 x NPT 1/4

Accessories Included

Ideal for chamfering plate, pipe, tubeand other profiles

Pneumatic Chamfering Tool

MINI BEVELER

1CMild Steel

7C

Mild Steel4R

3C

Stainless Steel4R

• Lightweight design for portable edge chamfering applications• Designed to chamfer stainless and carbon steels• Adjustable to chamfer angles from 15° to 45°• 300 mm minimum radius bend• Chamfer width up to 7 mm at 45°• Uses indexable carbide inserts

Model CB-01

Pneumatic Radial Chamfering Tool

CIRCUIT BEVELERIdeally suited for chamfering machine andmold component parts• Only requires a 6.8 mm diameter hole for chamfering• Two 3-sided indexable inserts provide a cost effective way to get a smooth, chatter free finish

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedChamfering Capacity

Chamfer AngleInlet SizeMass (Weight)

MPa (kgf/cm2)m3/min

min-1(rpm)

kg

AMBL-0307 / AMB-03070.6 (6)

0.914000

Up to 7 mm Chamfer or 2, 3, 4 mm RadiusUp to 3 mm Chamfer or 2, 3, 4 mm Radius

15° - 45°Rc 3/8

2.9


SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedChamfering Capacity

Chamfer AngleMinimum Workpiece ThicknessInlet SizeMass (Weight)

MPa (kgf/cm2)m3/min

min-1(rpm)

mm

kg

CB-010.6 (6)0.15

28000Up to 1 mm Chamfer

Up to 0.5 mm Chamfer45°

1.5 (0.5 mm Chamfer)Rc 1/4

0.5


• Indexable Insert with Hole 12.7 (Installed)• Indexable Insert Set Screw 4 x 7 (Installed)• Indexable Insert with Hole 12.7• Indexable Insert Set Screw 4 x 7• Knob• 2 pieces of Hex. Socket Set Screw 8 x 25

Accessories Included• 2 pieces of Hex. Nut M8• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• Spanner T-15F• Bushing R 3/8 x NPT 3/8

Model AMBL-0307• Lever type

202 mm

126 mm

180 mm

177 mm

126 mm

180 mm

202 mm

126 mm

180 mm

177 mm

126 mm

180 mm

64 mm

106 mm

64 mm

106 mm

XChamfer

YStraight

45˚X1

Y1

Mild Steel(mm)Chamfer Angle and WidthChamfering range of operation

Min. Diameter Min. Radius Min. Depth Min. Thickness

6.8 m

m 3 mm6 mm6 mm

7 mm1.5 mm

Round

Radius2, 3, 4 2, 3, 4Mild Steel(mm) Stainless Steel(mm)

RadiusXChamfer

Y

StraightZ

X74

2.2

Y778

Z9.98.18.3

Z4.24.43.9

X3

2.21

Y3

3.83.8

Mild Steel(mm) Stainless Steel(mm)

45˚30˚15˚

Chamfer Angle

Chamfer Angle, Width and Radius

Model AMB-0307• Ring type

Non-CE

28

C H A M F E R I N GUniquely designed to chamfer circular, elliptical andstraight line profiles

Model CB-02


CIRCUIT BEVELER

2C

Mild Steel2R

• 2 pieces of Indexable Insert 12.7 R3 (Installed)• 2 pieces of Indexable Insert Set Screw (Installed)• Indexable Insert Set Screw

Accessories Included• Spanner T-15D• Handle

Model CBR-03


CIRCUIT BEVELERFor bridge and shipbuilding applications

• Radius chamfering on the scallop parts or holes of bridge members

Shipbuilding

Bridge

• Meets or exceeds PSPC* requirements on surface preparation of steel materials prior to coating

• Radius chamfering on steel materials used in seawater ballast tanks and double-side skin bulk carrier production

• Dual cutting head with 4 radius surfaces per tip and a quick-change base*PSPC stands for Performance Standard for Protective Coatings regulated by International Marine Organization.

81 mm

117 mm

81 mm

117 mm

• Chamfers exterior and/or interior edges• Depth gauge provided to accurately set chamfer widths• Optional attachment PN TB02437 available for chamfering thin materials

116 mm

136 mm

116 mm

136 mm

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedChamfering Capacity Chamfer AngleInlet SizeMass (Weight)

MPa (kgf/cm2)m3/min

min-1(rpm)

kg

CB-020.6 (6)

0.415000

Up to 2 mm Chamfer or 2 mm Radius45°

Rc 1/41.8

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedChamfering Capacity Minimum Workpiece ThicknessInlet SizeMass (Weight)

MPa (kgf/cm2)m3/min

min-1(rpm)

mm

kg

CBR-030.6 (6)0.65

120003 mm Radius

6Rc 1/4

2

• Indexable Insert 9.525 (Installed)• Indexable Insert 9.525• Adjustment Gauge• Spanner T-9F

Accessories Included• Protective Cap• Hook Spanner 58-65• Bushing R 1/4 x NPT 1/4

Chamfering range of operationMin. Diameter Min. Radius Min. Depth

12 m

m 6 mm 20 mm

Chamfering range of operationMin. Diameter Min. Radius Min. Depth

22 m

m 11 mm 9 mm Round

Radius3Mild Steel(mm)

Radius

Chamfer Angle and Width

Round

Radius2Mild Steel(mm)

RadiusXChamfer

YStraight

45˚X2

Y2

Mild Steel(mm)Chamfer Angle, Width and Radius

Steel3R

C H A M F E R I N G

29

Optional Beveler Accessories

DescriptionPNRef.No. Sales Unit HB-15B

•

•

••••

•

•

•••

•

•

•••

•••

•

••

••

••

••

•

EMB-0307BAMBL-0307AMB-0307

MB-03A ECB-0203 CB-01 CB-02 CBR-03

TB09097TB09338TA9A093TB01159TB01791TB01651TB01790TB09018TA9A386TA9A592TA9A638TB09140TB09143TA9A728TB02539TA9A594TB02857TB03097TB02862TB02437TB03424TQ01683

Indexable Insert 8.4 for Mild SteelIndexable Insert 8.4 for Stainless SteelIndexable Insert 12.7Indexable Insert 12.7 with HoleIndexable Insert 12.7 R2Indexable Insert 12.7 R3Indexable Insert 12.7 R4Indexable Insert 12.7 R3Indexable Insert 9.525Indexable Insert 9.525 R2Indexable Insert 9.525 R3Guide Plate 78 Ass’y for More Stable OperationPlate Ass’y for Straight Edge UsePipe and tube Beveling AttachmentAttachment for Small Dia. PipeInner Head Ass’yGuide sleeve 24 mm dia. Ass’yPlate Ass’y for Straight Line UseDust Box Ass’yThin Plate Attachment Ass’ySpanner T-9DSpanner T-15D

10 pcs./set10 pcs./set12 pcs./set10 pcs./set10 pcs./set10 pcs./set10 pcs./set10 pcs./set10 pcs./set10 pcs./set10 pcs./set

1 set1 set1 set1 set1 set1 set1 set1 set1 set

1 piece1 piece

Ref. No.2 : Requires use of TB09140 Guide Plate 78 Ass’yRef. No.3 : Capacity 125 to 800 mm O.D.Ref. No.4 : Capacity 80 to 200 mm O.D.Ref. No.5 : Capacity Minimum 100 mm I.D.Ref. No.6 : For chamfering R2Ref. No.7 : Used with Plate Ass’y for Straight Line UseRef. No.8 : Used with Plate Ass’y for Straight Line Use

-----------123456789--

Indexable Insert

Spanner

1 2 3 4 5

6 7 8 9

CB-01CB-01

TB09140 Guide Plate 78 Ass’y for More Stable Operation TB09143 Plate Ass’y for Straight Edge Use

30

S C A L I N GRemoves weld splatter quickly and easilyPneumatic Chipping Hammer

AIR CHIPPER

Model ACH-16 Model CH-24

• Ideal tool for quickly and efficiently removing weld splatter, rust and other debris from most surfaces• Compact, heavy-duty construction for tough industrial applications• Easy one-touch chisel installation and removal – NO tools required• Idle protection system, helps prevent accidental start-up “ACH-16” only

147 mm 184 mm147 mm 184 mm

Optional Chisels for Air Chipper ACH-16PNRef. No. Description Sales Unit

TQ03431TQ03452TQ03453TQ03549

1234

1 piece

Flat Chisel 20 x 120Flat Chisel 20 x 180Curved Flat Chisel 20 x 120Flat Chisel 11 x 120

Optional Chisels for Air Chipper CH-24PNRef. No. Description Sales Unit

TP15233TP15234TP15166

567

1 pieceFlat Chisel 25 x 155Straight Flat Chisel 12.7 x 165Curved Flat Chisel 25 x 155

1 2 3 4 5 6 7

unit : mm

25

155155

25

155155

12.7

165165

11

120120

20

120120

20

180180

20

120120

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedShank SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

mm

kg

ACH-16

0.156000

10.5 Round

0.9

CH-24

0.24000

12.7 Square

1.7

0.6 (6)

Rc 3/8

• TQ03431 Flat Chisel (Installed)• Bushing R 3/8 x NPT 3/8• Hose Nipple R 3/8 x 3/8

• TP15166 Curved Flat Chisel (Installed)• Bushing R 3/8 x NPT 3/8• Hose Nipple R 3/8 x 3/8

S C A L I N G

31

A special spool valve inside gripassures excellent durability

Air Hammer

AUTO CHISEL



MPa (kgf/cm2)m3/min

min-1

mm

kg

A-3000.6 (6)

0.3260010

Rc 1/41.7

*Chisels are not included as standard.

Model A-300• Designed for speeding up the repair and sheet metal work of automobiles, etc.• Enables hammering work in narrow spaces• Durable and powerful action• Fast and easy chisel change to reduce downtime• A wide variety of chisels available

PN : TP00572Blank ChiselNo. 1001

PN : TP00573Flat ChiselNo. 1002

PN : TP04606Sheet Metal Chisel ANo. 1003

PN : TP00575Sheet Metal Chisel BNo. 1004

PN : TP00576Silencer Cutting ChiselNo. 1005

PN : TP00577Rubber Bushing RemoverNo. 1006

PN : TP00578Spot Weld BoosterNo. 1007

PN : TP00579Bushing ToolNo. 1008

PN : TP00580PunchNo. 1009

PN : TP00581Bushing Removing ToolNo. 1010

PN : TP00582Sheet Metal PunchNo. 1011

PN : TP0058320 mm Bending ChiselNo. 1012

PN : TP00584Fork Chisel 24No. 1013

PN : TA90051Panel CrimperNo. 1014



PN : TP0058938 mm ScraperNo. 1018

PN : TP0059060 mm ScraperNo. 1019

PN : TP0059160 mm Concave ScraperNo. 1020

PN : TP04995Sheet Metal Chisel CNo. 1023

PN : TP05244Moilpoint ChiselNo. 1024

PN : TP05775Rivet Removing PunchNo. 1025

PN : TP05801Rivet Caulking ChiselNo. 1026

185 mm

160 mm

185 mm

160 mm

For a variety of sheet metal work, bending,and rivet closing jobs

Puts increased efficiency into scraping,peeling spot welds, and cutting off boltsand pins

Cuts shapes in sheet metal fast Just the chisel for cutting off sheetmetal body panel

A quick cut-off chisel for muffler piping Helps you remove idle arm sleevesand bushings in record time

Ideal for peeling off spot welded pointsand cutting off pins

Puts speed and ease into the job of bushinginsertion

For driving out pins and rivets, and fittingand removing bearings and races

A faster servicing aid in removing bushings Opens holes for bolts and rivets Helps you in peening and removing slagaround welds

Disconnecting tie rod ends and ball joints Bending sheet metal: external body plates,doors, fenders, etc.

Disconnecting tie rod end ball joints Disconnecting tie rod end ball joints

Peeling paint & removing rust from iron plate Peeling paint & removing rust from iron plate Removing incrustation from pipe Cuts shapes in sheet metal fast

Breaking-up concrete, removing sandfrom castings

Removing rivets from brake lining ofheavy duty cars

Caulking brake lining of heavy duty cars

*An order is available from one piece.

• Bushing R 1/4 x NPT 1/4• Hose Nipple R 1/4 x 1/4

Optional Chisels

32

S C A L I N GIndustrial and shipboard pneumatic scalersPneumatic Scaler

SUPER KELEN



MPa (kgf/cm2)m3/min

min-1

mm

kg

S-5000.6 (6)0.27250012.7

Rc 1/44.7

S-250

4.1

S-1000

6.1• No.2005 38 mm Bend Scraper (Installed)• Hose Lock Nut M16• Hose Nipple 3/8

• Quickly and efficiently removes rust, scale, paint, tar and concrete from most surfaces• Ideal for industrial, maritime and shipboard cleaning and descaling operations• Idle protection system, tool will not activate unless contacting work surface• S-1000 – over 1.3 m in length for extended reach applications and operator convenience• Tool-less chisel installation and removal

537 mm

797 mm

537 mm

797 mm

1377 mm1377 mm

Model S-250 Non-CE Model S-500 Non-CE Model S-1000 Non-CE

PNRef. No. Description Sales UnitTP03645TP03646TP03647TP04010TP04552TP04553TP04554

1234567

1 piece

No.2001 60 mm ScraperNo.2002 38 mm ScraperNo.2003 Blank ChiselNo.2004 60 mm Concave ScraperNo.2005 38 mm Bend ScraperNo.2006 60 mm Concave Bend ScraperNo.2007 60 mm Bend Scraper

1

60

180180

7

60

180180

6

60

180180

4

60

177177

5

38

180180

2

38

180180

3

16 dia.

180180

unit : mm

Optional Chisels

S C A L I N G

33

Powerful scaling with multi-needlesNeedle Scaler

JET CHISEL

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

kg

JC-16

0.154000

1.4

JEX-24

0.274000

2.7

JEX-28

0.354500

3.5

JEX-2800A

0.433700

3.3

0.6 (6)

Rc 3/8

• 29 pieces of 2 mm x 150 mm Needles (Installed)• 29 pieces of 2 mm x 150 mm Needles• Bushing R 3/8 x NPT 3/8• Hose Nipple R 3/8 x 3/8

• 23 pieces of 3 mm x 180 mm Needles (Installed)• 6 mm Hex. Socket ScrewKey• Bushing R 3/8 x NPT 3/8• Hose Nipple R 3/8 x 3/8

• 28 pieces of 3 mm x 180 mm Needles (Installed)• 14 pieces of 4 mm x 180 mm Needles• Needle supporter 4 mm• 6 mm Hex. Socket Screw Key• Bushing R 3/8 x NPT 3/8• Hose Nipple R 3/8 x 3/8

• 28 pieces of 3 mm x 180 mm Needles (Installed)• 14 pieces of 4 mm x 180 mm Needles• Needle supporter 4 mm• Bushing R 3/8 x NPT 3/8• Hose Nipple R 3/8 x 3/8

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

kg

AJC-16

0.076000

0.98

JEX-20

0.24000

2.75

JT-200.6 (6)

0.24000

Rc 3/82.4




• Quickly and efficiently removes weld slag, rust, paint and scale from most surfaces• Ideal for cleaning and descaling steel, bridgework, castings, brick, stone and many other materials• Heavy-duty construction for industrial and maritime applications• Proven superior design features with no internal spring components ensure trouble-free performance

(JEX-2800A and JEX-20 have balancing springs)

Model JC-16• Lightweight model

Model JEX-24• Universal model

Model JEX-28• Heavy-duty model

Model AJC-16• Slim model

Model JT-20• Medium duty model

Model JEX-20• Reduced vibration model

Model JEX-2800A• Reduced vibration model

158 mm 237 mm264 mm 247 mm

154 mm 167 mm180 mm 178 mm

158 mm 237 mm264 mm 247 mm

154 mm 167 mm180 mm 178 mm

208 mm 263 mm 261 mm208 mm 263 mm 261 mm

S C A L I N G

34

Electric Needle Scaler

JET CHISEL

SpecificationsModelPower Source (Single Phase)Rated Power ConsumptionRated CurrentDuty CycleStroke SpeedPower Cord LengthMass (Weight)

EJC-32A

300

303000

54.5

110 - 120 V AC, 50/60 Hz

2.8

220 - 240 V AC, 50/60 Hz

1.4

Model EJC-32A516 mm

229 mm

516 mm

229 mm

Powerful 300 watt double insulated motor

WA

minmin-1

mkg

Reinforcement of a welded part with the shot peening effect increases strength by imparting residual stress to the surface of the workpiece through the high speed impact of the needles. Highly suitable for effective reinforcement of deteriorated welded parts.

Shot Peening Effect

Full Automatic System - Excludes EJC-32AThe only unit of it’s kind on the market without springs. This means no springs to break...no irregular power... and the advantage of low air consumption.

Self-Adjusting NeedlesJet Chisel needles automatically adjust to any surface contour. They get deep into corners, reach into uneven surfaces, and conform to all types of shapes, making it a tool no shop should be without.

JC-16 JEX-24 JEX-28 JEX-2800AModel

Combination of Needle and Needle SupporterAJC-16 JT-20 JEX-20 EJC-32A

Number of Needles RequiredNeedle Supporter PNNumber of Needles RequiredNeedle Supporter PNNumber of Needles RequiredNeedle Supporter PN

Length JC-16 JEX-24

••••

••••••••

••••••••

••••••••

••••••••

•••••••••••

•••••••••••

JEX-28 JEX-2800AModelNeedle

AJC-16 JT-20 JEX-20

••••••••

EJC-32A150 mm180 mm300 mm500 mm180 mm300 mm500 mm800 mm180 mm300 mm500 mm

Diameter

2 mm

3 mm

4 mm

PN

TA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221

Sales Unit

100 pcs./set100 pcs./set50 pcs./set50 pcs./set100 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set

2 mm

3 mm

4 mm

29 pcs.TP00290

----

53 pcs.TP0224423 pcs.

TP02245--

7 pcs.TQ05210

3 pcs.TQ04554

--

29 pcs.TP0033812 pcs.

TP00337--

29 pcs.TP0033812 pcs.

TP00337--

32 pcs.TP1647515 pcs.

TP16301--

66 pcs.TP0149928 pcs.

TP0146114 pcs.

TP01462

66 pcs.TP0149928 pcs.

TP0146114 pcs.

TP01462

Optional NeedlesPremium Nitto Kohki needles out-perform competitors’ needles ensuring optimal performance and trouble-free operation.

• Extended length, slim barrel design• Adjustable front handle for operator comfort and convenience

110 - 120 V220 - 240 V

Non-CE

G R I N D I N G & S A N D I N G G R I N D I N G & S A N D I N G

35 36

Heavy-duty grinders for tough applicationsPneumatic Grinder

MYTON

SpecificationsModelAir PressureAir ConsumptionFree Speed Depressed Center Grinding WheelInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mm

kg

MLG-25

0.42 (No-load)19000

58Rc 1/4

0.6

MLG-40

0.45 (No-load) 0.91 (Load)

MAGW-40 Lever Type

0.68 (No-load) 0.82 (Load)

MAGW-40 Ring Type0.6 (6)

• Green DiscGS #80• 5 mm Hex. Socket Screw Key• 19 mm Single Ended Spanner• Bushing R 1/4 x NPT 1/4

• 6 mm Hex. Socket Screw Key• Bushing R 3/8 x NPT 3/8

• 6 mm Hex. Socket Screw Key• 17 mm Single Ended Spanner• Bushing R 3/8 x NPT 3/8

Model MLG-25• Depressed center wheel 58 mm


Model MAGW-40• Lever type• Depressed center wheel 100 mm

Model MAG-50• Depressed center wheel 125 mm


Model MLG-70• Lever type• Depressed center wheel 180 mm

133 mm133 mm225 mm

87 mm

211 mm

96 mm

225 mm

87 mm

211 mm221 mm

96 mm

221 mm

96 mm 96 mm

13000100

Rc 3/81.5

SpecificationsModelAir PressureAir ConsumptionFree Speed Depressed Center Grinding WheelInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mm

kg

MAG-50

0.77 (No-load) 0.83 (Load)12000125

2.2

MLG-50

0.7 (No-load) 0.81 (Load)11000125

2.5

MLG-70 Lever Type

0.75 (No-load) 1.1 (Load)7600180

MLG-70 Ring Type0.6 (6)

Rc 3/8

• Air Hose Sub Ass'y• Exhaust Hose Ass'y• Side Handle• 4 mm Hex Socket Screw Key• Pin Face Wrench• Bushing R 3/8 x NPT 3/8

• Handle• Wheel Guard Ass'y• 4 mm Hex. Socket Screw Key• 6 mm Hex. Socket Screw Key• Pin Face Wrench• Bushing R 3/8 x NPT 3/8

• 6 mm Hex. Socket Screw Key• 10 mm Hex. Socket Screw Key• Bushing R 3/8 x NPT 3/8• Handle• Wheel Guard Ass'y

2.5 2.3

103 mm

239 mm

103 mm

271 mm

102 mm

271 mm223 mm

98 mm

103 mm

239 mm

103 mm

271 mm

102 mm

271 mm223 mm

98 mm

Model MLG-70• Ring type• Depressed center wheel 180 mm

Non-CE

Model MAGW-40• Ring type• Depressed center wheel 100 mm

Non-CE

• Side exhaust with noise reduction system• Great power/weight ratio

Ideal for sanding and/or polishing metal, aluminum, wood, plasticand many other materials

Pneumatic Sander

MYTON

SpecificationsModelAir PressureAir Consumption (No-load)Free Speed Abrasive DiscChuck SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)

mm

kg

MLS-20

0.4219000

1", 1 - 1/2" and 2"6

0.55

MAS-400.6 (6)0.45

13000100 mm

0.9

MAS-70

0.987500

180 mm

Rc 3/81.9

Rc 1/4N/A

• 1" Disc Sanding Pad• 1 - 1/2" Disc Sanding Pad• 2" Disc Sanding Pad• 2 pieces of 14 mm Single Ended Spanner• Bushing R 1/4 x NPT 1/4• Assortment of Sample Abrasive Disks Contains: 2 each of #60, #80, #100, and #120 2" abrasive disc 2 each of #60, #80, #100, and #120 1-1/2" abrasive disc 2 each of #60, #80, #100, and #120 1" abrasive disc

• 6 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4• 17 mm Single Ended Spanner

• 6 mm Hex. Socket Screw Key• 17 mm Single Ended Spanner• Bushing R 3/8 x NPT 3/8

Model MLS-20• Abrasive disc 1", 1 - 1/2" & 2"

Grinding Discs for Myton MLG-25Sales Unit DiscPN Description

GS#46 x 58 mmGS#60 x 58 mmGS#80 x 58 mmGS#100 x 58 mmGS#120 x 58 mmMyton Disc Z Z#40 x 58Myton Disc Z Z#60 x 58Myton Disc Z Z#80 x 58Myton Disc Z Z#100 x 58Myton Disc Z Z#120 x 58Myton Disc SA A#40 x 58Myton Disc SA A#60 x 58Myton Disc SA A#80 x 58Myton Disc SA A#100 x 58Myton Disc SA A#120 x 58 Designed for

curve sanding.

TB08872TB08873TB08874TB08875TB08876TB09074TB09075TB09076TB09077TB09078TB09079TB09080TB09081TB09082TB09083

5 pcs./set

10 pcs./set

5 pcs./set

5 pcs./set

5 pcs./set

Sanding Discs and Disc Pads for Myton MLS-20Sales Unit Sales UnitSanding Disc Disc PadPN Description

Sanding Disc 1" x #40Sanding Disc 1" x #60Sanding Disc 1" x #80Sanding Disc 1" x #100Sanding Disc 1" x #120Sanding Disc 1" x #180Sanding Disc 1" x #240Sanding Disc 1" x #320Sanding Disc 1 - 1/2" x #40Sanding Disc 1 - 1/2" x #60Sanding Disc 1 - 1/2" x #80Sanding Disc 1 - 1/2" x #100Sanding Disc 1 - 1/2" x #120Sanding Disc 1 - 1/2" x #180Sanding Disc 1 - 1/2" x #240Sanding Disc 1 - 1/2" x #320Sanding Disc 2" x #40Sanding Disc 2" x #60Sanding Disc 2" x #80Sanding Disc 2" x #100Sanding Disc 2" x #120Sanding Disc 2" x #180Sanding Disc 2" x #240Sanding Disc 2" x #320

TB09736TB09737TB09738TB09739TB09740TB09741TB09742TB09743TB09744TB09745TB09746TB09747TB09748TB09749TB09750TB09751TB09752TB09753TB09754TB09755TB09756TB09757TB09758TB09759

25 pcs./set

25 pcs./set

25 pcs./set

1 piece

1 piece

1 piece

TQ143841" Disc

Sanding Pad

TQ143831 - 1/2" DiscSanding Pad

TQ143822" Disc

Sanding Pad

132 mm

72 mm

82 mm99 mm

202 mm132 mm

72 mm

162 mm162 mm

82 mm99 mm

202 mm

Model MAS-40• Abrasive disc 100 mm

Non-CE Model MAS-70• Abrasive disc 180 mm• Japanese model

Non-CE

• Compact and lightweight design for working in confined spaces• Side exhaust with noise reduction system

MLS-20

67 mm67 mm

S A N D I N G S A N D I N G

37 38

Ideal for sanding and grinding in narrow spaces,recessed areas and on curved surfaces

Pneumatic Belt Sander

BELTON

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedBelt SpeedBelt SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)m/min

mm

kg

B-10N

0.4

112010 x 330

0.7

B-20N B-20NB

0.68140002160

30 x 540

2.4

B-30N0.6 (6)0.52

262020 x 520Rc 1/4

1.2• 2 pieces of Abrasive Belt Z#60 x 10 mm (1 piece installed)• Abrasive Belt Z#80 x 10 mm• Abrasive Belt Z#100 x 10 mm• Abrasive Belt Z#120 x 10 mm• 2 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4

• 2 pieces of Abrasive Belt Z#60 x 20 mm (1 piece installed)• Abrasive Belt Z#80 x 20 mm• Abrasive Belt Z#100 x 20 mm• Abrasive Belt Z#120 x 20 mm• 2.5 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4• Convex Shoe• Finger Pad Sub Ass'y• Pan Head Screw 5 x 10• Pan Head Screw 6 x 10

• 2 pieces of Abrasive Belt Z#60 x 20 mm (1 piece installed)• Abrasive Belt Z#80 x 20 mm• Abrasive Belt Z#100 x 20 mm• Abrasive Belt Z#120 x 20 mm• 4 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4• Convex Shoe• Finger Pad Sub Ass'y• Pan Head Screw 5 x 10• Pan Head Screw 6 x 10

• 2 pieces of Abrasive Belt Z#60 x 30 mm (1 piece installed)• Abrasive Belt Z#80 x 30 mm• Abrasive Belt Z#100 x 30 mm• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• Handle• Bushing R 1/4 x NPT 1/4

• Quick belt change• Rear exhaust system

Model B-10N• Belt size 10 mm (W)


Model B-20NB• Belt size 20 mm (W)


17000

The Idle Pulleyfor B-20N issupported onboth sides.

The Idle Pulleyfor B-20NB issupported onone side only.

Belt change is quick and easy Guard position is adjustable

Belt change can be made easily by pushing the idle pulley against the housing to lock the tension bar. Guard angle can be changed freely in accordance with the working position and shape of the workpiece.

For B-10N & B-20N

Push the idle pulley into self-locking positionto loosen the belt.

Just push the push button to pull back the tension bar.

Push

Idle Pulley Tension Bar

For B-30N

Push the idle pulley into self-locking positionto loosen the belt.

Just push the flat shoe to pull back the tension bar.

Self-locking position

Push

Shoe

299 mm

257 mm

250 mm

243 mm

250 mm

243 mm152 mm

223 mm 299 mm

257 mm

250 mm

243 mm

250 mm

243 mm152 mm

223 mm

Belt Speed Adjustment Optional Offset Bracket Ass’y for B-10N, B-20N, and B-30N

Belt speed can be easily adjusted by turning the adjust lever oradjust valve without a tool.

An optional offset bracket ass’y is available for individual model.

For B-10N & B-20N

High

Low

Adjust Lever

For B-30N

*Curved surface sanding is possible by using the offset bracket.

Offset Bracket

HighLow

Adjust Valve

•

••

•• •

Optional Parts

PNRef. No. Description Sales UnitApplicable Model

B-10N B-20NB-20NB

B-30N

TB05539TB07109TB08150TQ11686TB07283TQ10942

123456

1 set1 set1 set

1 piece1 set

1 piece

Offset Bracket 10 Ass’yOffset Bracket 20 Ass’yOffset Bracket 30 Ass’yConvex ShoeBracket 6 Ass’y*Shoe 6*

1 5 62 3 4

Sales Unit

#40#60#80#100#120#180#240#400

Abrasive Belt for B-10N

Zirconia (Z)PN

Belt Size : 6 mm x 330 mm (W x L)

Grit Alumina (AA)-

TB00241TB00242TB00243TB00244TB00245TB00246

-

-------

TA9A23750 pcs./set

When using the belt, optional bracket 6 ass’y and TQ10942 shoe 6 are required.

Sales Unit

20 pcs./set

#40#60#80#100#120#180#240#280#320#400

Abrasive Belt for B-20N and B-20NB

Zirconia (Z)PN


Grit Alumina (AA) Ceramic (CE)TA99605TA99606TA99607TA99608TA99609TB00250TB00251

---

TB08373TB08374TB08375TB08376TB08377

-----

20 pcs./set

-------

TA9A252TA9A253TA9A254

Sales Unit

50 pcs./set

#40#60#80#100#120#180#240#400


Zirconia (Z)PN


Grit Alumina (AA) Ceramic (CE)-

TA9A064TB00076TB00077TB00247TB00248TB00249

-

TB08368TB08369TB08370TB08371TB08372

---

50 pcs./set

-------

TA9A244

Sales Unit

#40#60#80#100#120#180#240#280#320#400


Zirconia (Z)PN


Grit Alumina (AA) Ceramic (CE)TB00252TB00253TB00254TB00255TB00256TB00257TB00258

---

TB08378TB08379TB08380TB08381TB08382

-----

20 pcs./set

-------

TA9A262TA9A263TA9A264

20 pcs./set

*TB07283 and TQ10942 are used together.

S A N D I N G S A N D I N G

39 40

Ideal for deburring, chamfering, bead grinding,and polishing applications

Pneumatic Belt Sander

BABY BELTON

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedBelt SpeedBelt SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)m/min

mm

kg

BB-10A Lever Type

0.6

BB-10A Ring Type0.6 (6)

16000

Rc 1/40.5

• Abrasive Belt Z#100 x 10 mm (Installed)• Abrasive Belt Z#120 x 10 mm• Abrasive Belt Z#180 x 10 mm• Abrasive Belt Z#240 x 10 mm• 1.5 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4

• Abrasive Belt Z#100 x 10 mm (Installed)• Abrasive Belt Z#120 x 10 mm• Abrasive Belt Z#180 x 10 mm• Abrasive Belt Z#240 x 10 mm• 1.5 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4

• Abrasive Belt Z#60 x 20 mm (Installed)• Abrasive Belt Z#120 x 20 mm• Abrasive Belt Z#240 x 20 mm• 2.5 mm Hex. Socket Screw Key• 3 mm Hex. Socket Screw Key• Shoe• Dust Cover• Bushing R 1/4 x NPT 1/4

• Compact and lightweight, yet powerful• Alternative rotation direction• Ergonomically designed for left or right hand operator convenience

Model BB-10A• Lever type• Belt size 10 mm (W)

Model BB-20• Belt size 20 mm (W)

0.25

100010 x 330

BB-20

0.43

110020 x 330

0.8

246 mm

79 mm

249 mm

103 mm

246 mm

79 mm

249 mm

103 mm

Quick and easy belt installation and removal "NO Tools Required"

The throttle lever can be turned by 180 degrees.

Ergonomically designed for right or left hand operator convenience

Push idle pulley bracket into self-locking position.

Remove side cover.1

Push locking lever to tighten the belt.

3

Replace grinding belt.

2

Left handgrip

Right hand grip

Belt rotation direction can be changed.

Belt rotation direction can be changed to control the direction of chip splash.

Forward Reverse

Sanding for curved surfaces

Curved surface sanding is possible by using the offset bracket.

The offset bracket can be positioned up or down.

Push-in offset bracket pulley allows the following use.

Offset Bracket

245.3 mm

79 mm

245.3 mm

79 mm

Model BB-10A• Ring type• Belt size 10 mm (W)

Non-CE

Belt Speed Adjustment (BB-10)

Speed can be adjusted by turning the adjust valve with a screwdriver.

Optional PartsPNRef. No. Description Sales Unit Model

TB05539TB07109TB07224TQ10701TB07227

12345

1 set1 set1 set

1 piece1 set

BB-10A

BB-20

Offset Bracket 10 Ass’yOffset Bracket 20 Ass’yTension Bar 520 Ass’y*Shoe 520*Finger Pad Ass’y 520

High speed

Low speed

Adjust Valve

Guard position is adjustable (BB-20)

Guard angle can be changed freely in accordance with the working positionand shape of the workpieces.

Guard

Belt Speed Adjustment (BB-20)

Belt speed can be easily adjusted by turning the adjust valve without a tool.

Adjust Valve

High

Low

Ideal for deburring, chamfering, bead grinding, and polishing applications

Deburring & chamfering of uneven edge and plate surfaces Detail finishing Deburring of thin materialsCurved and unique profiles

1 2 3 4 5

Sales Unit

50 pcs./set

#40#60#80#100#120#180#240#400

Abrasive Belt for BB-10A

Zirconia (Z)PN


Grit Alumina (AA) Ceramic (CE)-

TA9A064TB00076TB00077TB00247TB00248TB00249

-

TB08368TB08369TB08370TB08371TB08372

---

50 pcs./set

-------

TA9A244

Sales Unit

#40#60#80#100#120#180#240#320#400

Abrasive Belt for BB-20

Zirconia (Z)PN


Grit Alumina (AA) Ceramic (CE) Non-woven-

TB07114TB07115TB07116TB07117TB07118TB07119

--

-TB07125TB07126TB07127TB07128

----

20 pcs./set

-----

TB07122 A-M Equivalent to #180-

TB07121 A-VF Equivalent to #320TB07123 S-SF Equivalent to #400

5 pcs./set

--------

TB0712020 pcs./set

*TB07224 and TQ10701 are used together.

S A N D I N G

41

Super lightweight, low-vibration designHandy Pneumatic Sander

FREE SANDER

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedOrbit DiameterPad SizePaper SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mmmmmm

kg

FS-50A

0.1415000

1.275 x 8270 x 114

FS-100C

0.220000

1.5110 x 100114 x 140

0.6 (6)

Rc 1/80.5

• Air Hose H Ass’y• 5 pieces of Abrasive Paper #180• 5 pieces of Abrasive Paper #240• Bushing R 1/4 x NPT 1/4

• Air Hose H Ass’y• 5 pieces of Abrasive Paper #180• 5 pieces of Abrasive Paper #240• Bushing R 1/4 x NPT 1/4

Model FS-50A Model FS-100C

• Ideal for sanding and surface finishing wood, metal, plastic and other materials• Lightweight design with minimal vibration• High output and low air consumption motors produce high speed orbits for swirl-free finishes• Oil free design• Suitable for industrial and production applications

Round-Pad for FS-100C

The pad is made of sponge rubber and conforms easily to the shapebeing worked.Double-stick tape is used with round pad.

PN Description Sales Unit ModelTA99828TB02240TA9A367TA91474TB02235TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271

Ref. No.123456

1 piece

1 piece

200 pcs./set

FS-50A

FS-100C

Rubber PadDust CollectorRubber PadRound PadDust CollectorAbrasive Paper #100Abrasive Paper #120Abrasive Paper #150Abrasive Paper #180Abrasive Paper #240Abrasive Paper #280Abrasive Paper #320


82 mm75 mm100 mm

110 mm

82 mm75 mm100 mm

110 mm

Dust Collector

Rubber Pad Round Pad

Abrasive Paper

1 & 3

62 & 5

4

S A N D I N G

42

Ideal for inline and grain sanding applicationsPneumatic Reciprocating Sander

LINE SANDER

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedStroke LengthPad SizePaper SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

mmmmmm

kg

LS-100.6 (6)0.114000

455 x 10357 x 140Rc 1/80.75

• Air Hose E Ass’y• Block Rubber Pad• Base Plate A Ass’y• 5 pieces of Abrasive Paper #240• 5 pieces of Abrasive Paper #320• Bushing R 1/4 x NPT 1/4

Model LS-10

• Ideal for most inline and profile sanding applications• Compact and lightweight 0.75 kg design• Low vibration and minimal noise output• Suitable for sanding steel, aluminum, wood, plastic and other materials

Special Sanding Pad

The Block Rubber Pad Assembly can be easily trimmed to conform to theshape being worked and is available as an accessory.

103 mm

55 mm

103 mm

55 mm

Dust Collector Rubber Pad Block Rubber Pad

1 2 3

PNRef. No. Description Sales UnitTB02244TA96665TA96739

123

1 pieceDust CollectorRubber PadBlock Rubber Pad


Abrasive Paper

Cut standard size paper (9" x 11") into 8 pieces, as shown below. For dry sanding, use an open coat abrasive paper with silicon carbide or aluminum oxide abrasive grains to prevent clogging, improve grinding efficiency, and prolong the life of the paper.

1/8

11”

9”

11”

9”

S A N D I N G

43

Heavy-duty and powerful withadjustable speed regulator

Pneumatic Compact Sander

ORBITAL SANDER• Powerful dual action for tough applications• Standard with dust extraction system• Rugged construction for years of reliable performance

Model APS-125/150

Pneumatic Compact Sander

PALM ORBITAL SANDERErgonomic lightweight design• Extremely light. APS-125 weighs just 690 g• Ergonomically designed for operator convenience and comfort• Powerful high speed 10000 RPM motor• Ultra small orbital action for high quality swirl-free finishes• Available with 125 mm or 150 mm pads• Variable speed control

Model OSV-60A

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedOrbit DiameterPaper (Self Stick Paper) SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mmmm

kg

OSV-60A0.6 (6)0.68850010150

Rc 1/42

• Dust Collection Ass’y with Dust Bag• Single Ended Spanner 17• Bushing R 1/4 x NPT 1/4• Brush

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedOrbit DiameterPaper (Self Stick Paper) SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mmmm

kg

APS-125

125

0.69

APS-150

150

0.72

0.6 (6)0.45

100005

Rc 1/4

• 17 mm Single Ended Spanner• Bushing R 1/4 x NPT 1/4

*VELCRO Pad is available as option.

Non Vacuum

For Self Vacuum & Central Vacuum

The non-vacuum model is available from stock and can easily be modifiedto self-vacuum or central vacuum.Self Vacuum Central Vacuum

Applications• Feather edging, metal preparation, and finishing work on body filler• Curved surface sanding and corner rounding in wood work

Random orbital action creates a professional finish

By offsetting the sanding pad shaft, fast aggressive sanding is achieved while dramatically reducing swirl patterns. Speed adjustments allow for the best speed for the best job.

Random orbital action creates a professional finish

By offsetting the sanding pad shaft, fast aggressive sanding is achieved while dramatically reducing swirl patterns. Speed adjustments allow for the best speed for the best job.

245 mm245 mm

145 mm145 mm

G R I N D I N G

44

Ideal for most deburring, finishing and grinding applicationsPneumatic Die Grinder

AIR SONIC

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedChuck SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mm

kg

L-25B

0.427000

0.6 (without hose)

L-35C

0.3537500

1.5

0.45 (without hose)

0.6 (6)

6Rc 1/4

• 14 mm Single Ended Spanner• Mounted Wheel No.2• Mounted Wheel No.3• Chuck Pin• Bushing R 1/4 x NPT 1/4

• 2 pieces of 14 mm Single Ended Spanner• Mounted Wheel 13 x 13 x 6 x 38• Bushing R 1/4 x NPT 1/4

• Precision machined with heavy-duty spindle and support bearings• Rear exhaust with noise reduction system• Suitable for industrial and production applications• Locking throttle lever helps prevent accidental start-up• Accepts most stone-type and rotary carbide burrs with 6 mm shanks

136 mm

171 mm

136 mm

171 mm

Rotary Burr for AIR SONIC L-35C (Sales Unit : 1 piece)No.1 : CB1C-106

No.5 : CB5C-104

No.2 : CB2C-105

No.6 : CB6C-102

No.3 : CB3C-103

No.7 : CB7C-103

No.4 : CB4C-103

No.8 : CB8C-105

PN : TP10594

PN : TP10598

PN : TP10595

PN : TP10599

PN : TP10596

PN : TP10600

PN : TP10597

PN : TP10601

Mounted Wheel for AIR SONIC L-25B (Sales Unit : 5 pcs./set)Optional Accessories

No.1 : 16 x 32

No.5 : 19 x 28

No.2 : 16 x 32

No.6 : 25 x 13

No.3 : 19 x 20

No.7 : 32 x 10

No.4 : 25 x 25

No.8 : 16 ball

PN : TA9A277

PN : TA9A281

PN : TA9A278

PN : TA9A282

PN : TA9A279

PN : TA9A283

PN : TA9A280

PN : TA9A284

Model L-25B• For all grinding, deburring and finishing jobs

Model L-35C• Special design for rotary burrs

PN Description Sales UnitTP02806 1 piece

A mounted wheel or rotary burr with 3 mm shaftcan be installed on L-25B and L-35C by using thechuck sleeve 6 x 3.

Chuck Sleeve 6 x 3 mm

Optional Accessory

G R I N D I N G / F I L I N G

45

High speed rotation 56500 rpmPneumatic Die Grinder

AIR SONIC

Model SHL-40

Portable Precision Finishing File

SUPER HAND LIGHTBest suited for deburring of die-castaluminum products and machined parts

Model AL-55

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedChuck SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mm

kg

AL-550.6 (6)0.17

565003

G 1/40.25

• 2 pieces of 7 x 9 mm Spanner• Mounted Wheel 5 x 13 x 3• Bushing R 1/4 x NPT 1/4

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedStroke LengthFile shank SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

mmmm

kg

SHL-400.6 (6)0.079000

43

Rc 1/40.4

• Flat File LF-13• 2 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4

• Smooth high speed rotation and low vibration enables precision grinding• Stepless speed change from 0 to 56500 rpm meets a wide range of grinding applications• Compact and light weight for comfortable operation over long periods of time.• Triangular grip fits operator’s hand. Special plastic grip prevents cold hands and absorbs vibration.• Rear exhaust system

22 mm OD22 mm OD

PN Description Sales UnitTB00137 10 pcs./setMounted wheel 5 x 13 x 3

Optional Accessory

Sales Unit : 3 pcs./setOptional Accessories

Rat Tail File LF-10

Half Round File LF-12

Triangular Taper File LF-11

Flat File LF-13

PN : TB09652

PN : TB09653

PN : TB09654

PN : TB09651

80

3 OD

80

3 OD

80

4.5

80

3 OD

129 mm129 mm

179 mm179 mm

• Small size, light-weight, and low-vibration model• Reduced operator fatigue for greater productivity

Reciprocating motion4 mm stroke

F I L I N G

46

Fast, efficient filing, sanding and deburring toolsPortable Precision Finishing File

SUPER HAND

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedStroke LengthFile shank SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

mmmm

kg

SH-100A

0.243700

6.3

1.1

ASH-900

0.136300

5.0

0.5

0.6 (6)

9

Rc 1/4

• Rat Tail File SF-10• Triangular Taper File SF-11• Half Round File SF-12• Flat File SF-13• 3 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4• Air Hose E Ass’y

• Rat Tail File SF-10• Triangular Taper File SF-11• Half Round File SF-12• Flat File SF-13• 2.5 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4

Model SH-100A• Rugged construction for reliable performance

Model ASH-900• Weight reduced by half for comfortable operation over long period of time

• Eliminates time consuming manual hand-filing operations• Ideal for industrial production filing applications on steel, aluminum, brass, wood and other materials• Unique and compact design delivers reduced vibration performance while reducing operator fatigue.• Interchangeable files• Rear exhaust system• Weight reduced by half for comfortable operation over long period of time (ASH-900)

177 mm177 mm

PN Description Sales UnitTA9A222TA9A223TA9A224TA9A225TA91752TA94625TB04319

Ref. No.1234567

5 pcs./set

1 set

Rat Tail File SF-10Triangular Taper File SF-11 Half Round File SF-12Flat File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100A (use with TA91752)Sanding Pad Ass'y for ASH-900


182 mm182 mm

1

2

3

4

5

6

7



F I L I N G / D E B U R R I N G

47

Light weight, ultra-low vibration filer for polishingand lapping operations

Portable Fine Finishing File

MICRO AIR HAND

Model MAH-05 Model MAH-16

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedDeburring Hole diameterCountersink Shank SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)mmmm

kg

BC-0050.6 (6)0.22420

3 to 346, 8, 10, 12*

Rc 1/80.75

• Chuck 6 mm• Chuck 8 mm• Chuck 10 mm (Installed)• Suspension Bail• 2.5 mm Hex. Socket Screw Key• Bushing R 1/8 x NPT 1/4

• Fine reciprocating motion best for precision parts filing

176 mm176 mm 176 mm176 mm

Mounting Examples

*This holder can be used for polishing and lapping applications by mounting ceramic stones, etc.(Max size: Thickness 3.2 mm x Width 20 mm)

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedStroke LengthFile Shank SizeInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

mmmm

kg

0.6 (6)0.07

3Rc 1/40.37

MAH-05

220000.5

MAH-16

110002.2

• Flat End Diamond File• Round End Diamond File• 2 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4


3 OD

1 OD

65

3 OD

4.5

65

2 3 OD

65

3 OD

65

PN Description Sales Unit

TB07502

TB07503

TB07504

TB07505

TB07506

5 pcs./set

5 pcs./set

5 pcs./set

5 pcs./set

1 set

Flat End Diamond File

Round End Diamond File

Triangular End Diamond File

Half-round End Diamond File

Vice Holder*


209 mm209 mm*Chuck 12 mm is optional. Countersinks are not provided with the tool. Please purchase them locally.

*indicates outer appearances of the chucks around the hex. socket head set screw.


Chuck Appearance* Countersink ShankDiameter (mm)

Chuck 6

Chuck 8

Chuck 10

Chuck 12

6

8

10

12

Overall Length of Chuck (mm)

49.5

49.5

49.5

60

Compatibility table between chuck and countersink shank diameter

Model BC-005

Pneumatic Deburring Tool

BURR CUTTERFor deburring machined holes• While gripping the lever, push the countersink into the machined holes to remove burrs• Optimum speed can be obtained by the adjust valve, resulting in clear deburred surfaces• Push-to-engage type prevents the countersink from coming off the hole and damaging the workpiece• Replacement of the countersink is easy and quick with a set of three quick change chucks provided

Reciprocating motion0.5 mm stroke

Reciprocating motion2.2 mm stroke

C U T T I N G / D R I L L I N GSpecial double-piston system provides low vibrationwhile improving cutting speed!

Pneumatic Hacksaw

SUPER SAWModel SSW-110

Model ADR-65 Model ADR-100

SpecificationsModelAir PressureAir Consumption (No-load)Stroke SpeedStroke LengthCapacity (Max. plate thickness)Inlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1

mmmm

kg

0.6 (6)0.297000113

Rc 1/40.62

SSW-110

• 2 pieces of 32 mm Saw Blade• 3 mm Hex. Socket Screw Key• Bushing R 1/4 x NPT 1/4

SpecificationsModelAir PressureAir Consumption (No-load)Free SpeedMax. drilling CapacityInlet SizeMass (Weight)


MPa (kgf/cm2)m3/min

min-1(rpm)

kg

0.6 (6)

Rc 1/4

ADR-65

0.5529006.5

0.8

ADR-100

0.67200010.0

1.1• Drill chuck (Installed)• Chuck Handle• Bushing R 1/4 x NPT 1/4• Cupla 30SH

48

• Ideal for sawing and trimming operations on sheet metal, aluminum, plastic and other materials• Suitable for automotive, fabrication, HVAC, electrical and woodworking applications• Ultra lightweight construction with low vibration performance• Optimized blade stroke for maximum cutting performance• Powerful dual piston construction• Locking throttle lever helps prevent accidental start-up

205 mm205 mm

PNRef. No. Description Sales UnitTB00759TB00760TB00192TB00193TA9A011TA9A005

123456

10 pcs./set

9 TPI Saw Blade for Gypsum-board12 TPI Saw Blade for Plywood Panel14 TPI Saw Blade for Plastic18 TPI Saw Blade for Plastic24 TPI Saw Blade for Mild Steel32 TPI Saw Blade for Mild Steel

Pneumatic Hand Drill

AIR DRILLThe power and performance you need to drill deeper and faster• Ultra high power to weight ratio• Ergonomically designed to reduce operator fatigue• Variable speed control• Reversible• Designed for industrial and production applications

166 mm

130 mm

184 mm166 mm

130 mm 137 mm137 mm

184 mm

Reversible

Change rotation direction by turning the valve as indicated.

Variable speed adjustmentTurn the speed control nutto change the R.P.M.

ReverseForward

PN Description Sales UnitTQ10969 1 pieceHanger

Optional Accessory


1 2 3 4 5 6

S P R I N G B A L A N C E R

49

TIGON spring balancer improveswork safety and efficiencySPRING BALANCER series

HOSE REEL BALANCER series

SpecificationsModelCapacityStrokeWeight

kgmkg

SpecificationsModelCapacityStrokeWeightHose Diameter

kgmkg

mmmm

I.D.O.D.

ModelCapacityStrokeWeight

kgmkg

ModelCapacityStrokeWeight

kgmkg

RETRACTOR series Handy knob for easy tension adjustment

The “TIGON” range of spring balancers offer a simple cost effective solution to take the strain out of handling tools thus improving work safety and efficiency. The balancer range covers 0.5 to 70 kg tool capacity with a maximum cable length of 2 meters.

TW-00.5 - 1.5

1.00.5

TW-31.0 - 3.0

1.31.4

TW-52.5 - 5.0

1.31.5

TW-000.5 - 1.5

0.50.2

TW-159.0 - 15.0

1.33.8

TW-2215.0 - 22.0

1.57.2

TW-3022.0 - 30.0

1.57.6

TW-94.5 - 9.0

1.33.4

TW-5040.0 - 50.0

1.510.4

TW-6050.0 - 60.0

1.511.6

TW-7060.0 - 70.0

1.511.8

TW-4030.0 - 40.0

1.59.8

HW-00.5 - 1.5

1.31.66.510

HW-31.5 - 3.0

1.31.76.510

HW-53.5 - 5.0

1.31.86.510

SpecificationsModelCapacityStrokeWeight

kgmkg

RW-31.0 - 3.0

2.00.7

RW-52.5 - 5.0

2.00.9

TW-06R0.2 - 0.6

1.50.3

TW-1R0.5 - 1.5

1.50.3

RW-00.5 - 1.5

2.00.5

Functions both as balancer and hose reel

Vibration Level, Sound Pressure Level, and Sound Power Level

50

4.16.34.06.22.54.12.53.42.54.6

10.04.95.96.67.07.04.8

15.59.08.3

11.510.5

2815.017.511.514.516.015.0

3066

1005029

17.05881

2.52.56.36.34.66.53.64.13.86.23.57.02.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.72.56.04.67.25.57.47.23.12.59.36.84.82.52.52.54.2

Beveler (Pneumatic)

Series Model MeasurementPoint

VibrationStandard

Sound PressureLevel dB(A)

Sound PowerLevel dB(A)

Vibration Levelm/s2

GripKnobGripKnobGripGripGripHandleGripHandleGripKnobGripKnobGripKnobGripGripGripGripNeedle GuideGripNeedle GuideGripNeedle GuideGripNeedle GuideGripHandle -GripGripGripGripSupporting SectionGripSupporting SectionGripGripGripGripGripHandleGripHandleGripHandleGripHandleGripGripGripHandleGripGripGripGripHandleGrip LGrip RGrip LGrip RGrip LGrip RGripGripGripGripSupporting SectionGripGripGripGripGripGripGripGripGripGripGripGrip

EN ISO 20643

EN 60745-1

EN 60745-2-6

EN ISO 28927-9

EN 20643

EN 20643

EN 20643

ISO 28927-3

EN 28927-3

EN 28927-1

EN 28927-9

28927-12

EN 20643

EN 28927-8

EN 28927-3

Auto Chisel (Pneumatic)

Jet Chisel (Electric)

Jet Chisel (Pneumatic)

Air chipper (Pneumatic)

Super Kelen (Pneumatic)

Myton Grinder (Pneumatic)

Myton Sander (Pneumatic)

Belton (Pneumatic)

Free Sander (Pneumatic)

Line Sander (Pneumatic)

Orbital Sander (Pneumatic)

Palm Orbital Sander (Pneumatic)

Air Sonic (Pneumatic)

Super Saw (Pneumatic)

Super Hand (Pneumatic)

Micro Air Hand (Pneumatic)

Burr Cutter (Pneumatic)

Beveler (Electric)

AMBL-0307

AMB-0307

CB-01CB-02

AJC-16JT-20JEX-20

A-300ACH-16CH-24S-250

S-500

S-1000

MAG-50

MLG-50

MLG-70 Lever

MLG-70 Ring

MLG-25MLG-40MAGW-40 LeverMAGW-40 Ring

MLS-20MAS-40

MAS-70

B-10NB-20NB-20NB

B-30N

BB-10A Lever Type

BB-10A Ring Type

BB-20

FS-50AFS-100CLS-10

OSV-60A

APS-125APS-150L-25BL-35CAL-55SSW-110SH-100AASH-900SHL-40MAH-05MAH-16BC-005

CBR-03

HB-15B

EMB-0307B

MB-03A

ECB-0203

JC-16

JEX-24

JEX-28

JEX-2800A

EJC-32A

98

98

9985

95102103

1089798112

111

110

95

100

100

100

95999795

9690

96

899496

93

89

89

96

889689

100

8992878782828773817575

100

92

75

95

91

84

92

104

107

105

96

87

87

8874

849192

978687101

100

99

84

89

89

89

84888684

8579

85

788385

82

78

78

85

778578

89

788176767171766271646489

81

64

84

80

83

81

93

96

94

85

QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS

51 52

CUPLA

Nitto Kohki supplies various types of air Cuplas to meet all needs of air piping from main supply, relays in factories, pipe end connections to pneumatic tools, and those of air piping within equipment. The following sketch gives you some examples of air piping using Hi Cupla Series and may serve as a good reference in selecting appropriate Cuplas. For more information, please visit http://www.nitto-kohki.co.jp/e/prd/d_cat/ and see our eCatalog here.

Duster CuplaDCS-65PNG

Hi Cupla BL65SN-BL

Nut Cupla65PNG

Nut Cupla65PN

Hi Cupla20PM

Hi Cupla20PM

Purge PlugPV-40PH

Hi Cupla 200200-40SH

Line Cupla 200200T Type

Plastic Plug65PN-PLA

Purge Line CuplaRE-PV-30

NK Cupla HoseNKU-605B

Rotary Nut Cupla65SNRG

Anti-vibration Plug HoseSHA-3-2R

NK Cupla Coil HoseNKC-503B

Purge Hi CuplaPV-40SM

Twist PlugTS-20PM

Twist PlugTS-20PM

Rotary PlugRL-20PM

Hi Cupla AceHA-65SN

Air Screwdriver

Air Grinders

Air Drill

Air Drill

Impact Wrenches

Blow Guns

HI CUPLA• One-way shut-off cupla with an automatic shut-off valve in the socket• Important parts are hardened for excellent wear resistance and durability

• Simple and secure push-to-connect type• New valve design for low pressure loss to achieve flow rate increase

SocketPlugFor hose connection

17PH20PH30PH40PH400PH600PH800PH

For 1/4" hoseFor 1/4" hoseFor 3/8" hoseFor 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose

For female thread connection10PM20PM30PM40PM400PM600PM800PM

For Rc 1/8For Rc 1/4For Rc 3/8For Rc 1/2For Rc 1/2For Rc 3/4For Rc 1

For male thread connection20PF30PF40PF400PF600PF800PF

For R 1/4For R 3/8For R 1/2For R 1/2For R 3/4For R 1

For male thread connection20PFF For G 1/4"

For hose connection17SH20SH30SH40SH400SH600SH800SH

For 1/4" hoseFor 1/4" hoseFor 3/8" hoseFor 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose

For female thread connection10SM20SM30SM40SM400SM600SM800SM

For Rc 1/8For Rc 1/4For Rc 3/8For Rc 1/2For Rc 1/2For Rc 3/4For Rc 1

For male thread connection20SF30SF40SF400SF600SF800SF

For R 1/4For R 3/8For R 1/2For R 1/2For R 3/4For R 1

SocketFor hose connection

200-17SH200-20SH200-30SH200-40SH

For 1/4" hoseFor 1/4" hoseFor 3/8" hoseFor 1/2" hose

For female thread connection200-20SM200-30SM200-40SM

For Rc 1/4For Rc 3/8For Rc 1/2

For male thread connection200-20SF200-30SF200-40SF

For R 1/4For R 3/8For R 1/2

HI CUPLA 200

Brass1/8" to 1"

1/4" to 1" hose1.010

Standard material

Steel(Chrome-plated)

1.515

Stainless steel

1.515

ThreadHose barb

Nitrile rubberNBR (SG)

-20˚C to +80˚C

SpecificationsBody materialSize

Working pressure

Seal materialMarkWorking temperature rangeRemarks

MPakgf/cm2

Fluoro rubberFKM (X-100)

-20˚C to +180˚C

Steel (Chrome-plated)1/4", 3/8", 1/2"

1.515

Nitrile rubberNBR (SG)

-20˚C to +60˚CStandard material

SpecificationsBody materialSize(Thread and hose barb)Working pressure

Seal materialMarkWorking temperature rangeRemarks

MPakgf/cm2

QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS

53 54

Steel (Chrome-plated), Stainless steel1.5 MPa (15 kgf/cm2)

Nitrile rubber

SpecificationsBody materialWorking pressureSeal material

Steel (Nickel-plated), Stainless steel1.5 MPa (15 kgf/cm2)

Nitrile rubber


• Lightweight plastic coupling with automatic safety lock• Pressure ratings comparable to steel Cuplas• Just push plug into socket for simple connection

NUT CUPLA

HI CUPLA ACE

Engineering plastics (PBT, POM)1.5 MPa (15 kgf/cm2)

1.0 MPa (10 kgf/cm2) for Model HA-TNitrile rubber

SpecificationsBody materialWorking pressure

Seal material

• Newly developed rotary function allows 360° swivelling• Rotary neck plug for hose connection to pneumatic tools and pneumatic devices• Fits at 45° angle to the tool eliminating annoying offset load caused by connected hose

ROTARY PLUG

• No hose clamp required• Nut types are available in Hi Cupla Series and Hi Cupla 200 Series• To mount on hose, simply slide it over the nipple and tighten the nut

*For more information, please visit http://www.nitto-kohki.co.jp/e/ and see our eCatalog here.

• Enables several air lines to be taken simultaneuosly from one supply line• Just push in the plug into socket for simple and secure connection• Choose from the 2-outlet type (Model 200T), the 5-outlet straight type (Model 200L)

and the 5-outlet star type (Model 200S) to suit your application

LINE CUPLA

AluminumSteel (Chrome-plated)1.5 MPa (15 kgf/cm2)

Nitrile rubber

SpecificationsBody materialCuplaWorking pressureSeal material

Aluminum alloy1.5 MPa (15 kgf/cm2)

Nitrile rubber


• Unique full-open gate type valve mechanism realizes low pressure loss and high flow rate, which reduces required source air volume

• The flow rate is increased by up to 40% more than that of conventional Cuplas• During connection and disconnection, the valve is closed, enabling connection/disconnection

under zero line pressure

FULL-BLOW CUPLA

Steel (Chrome-plated), Stainless steel1.5 MPa (15 kgf/cm2)

Nitrile rubber


Steel (Chrome-plated)1.0 MPa (10 kgf/cm2)

Nitrile rubber


R 1/4", R 3/8"Hi Cupla (30PH)

320 mm

SpecificationsSize (Thread)Inlet (Plug)Overall length

HI CUPLA BL

PURGE PLUG

• Protects the Cupla from shocks generated by vibrating tools and impact tools

• Prevents hard-to-notice flow reduction caused by "Cupla" wear under continuous vibration

• Flexible rubber hose allows free and wide range of tool motion.

ANTI-VIBRATION PLUG HOSE

• Sleeve-lock mechanism prevents accidental disconnection• Critical structural parts made of steel are heat-treated for increased strength

giving greater durability and resistance to wear• SN-BL type for connection to urethane hose requires no hose clamp

• Eliminates an unleasant popping noise and accidental hose whip on disconnection• Unique design of air purge system enables the residual pressure release quickly and quietly.• The function is assured even under a high supply pressure or with a long hose

• Multiple outlets are available from single air supply source.• Sideway air outlets are rotatable to any angle. Possible hose twists can be

eliminated by the component Cupla's swivel mechanism• Choose either RT type (2 outlets) or RE type (3 outlets) to suit you application

ROTARY LINE CUPLA

Brass (Chrome-plated)1.0 MPa (10 kgf/cm2)

Nitrile rubber


Body: Brass (Chrome-plated), Cupla: Steel (Chrome-plated)1.5 MPa (15 kgf/cm2)

Nitrile rubber


• Just push in the plug for connection regardless of internal pressure in socket• Eliminates an unleasant popping noise and accidental hose whip on disconnection• Even after connection, lever operation gives perfect control over valve opening/closing

PURGE HI CUPLA

N i t t o K o h k i ’ s L a b o r S a v i n g P r o d u c t s N i t t o K o h k i ’ s L a b o r S a v i n g P r o d u c t s

55 56

Nitto Kohki’s “delvo” electric screwdrivers are high-quality tools for professional use, with special emphasis on precise torque control and long-term reliability. “delvo” give you the ability to get it right, every time.

Nitto Kohki offers a lineup of various types of compressors and pumps. These include linear-driven, electro-magnetic diaphragm, DC, and “bimorph” piezoelectric products. Our compressors and pumps are renowned for being compact and lightweight as well as for their low noise level, clean operation and durability for longer life. In further applying these technologies, we are also expanding applications to various fields that include medical, well-being, health devices and environment related equipment.

Professional Tools for Assembling High-Technology Goods Nitto Kohki’s Compressors and Vacuum Pumpswill enhance your system flexibility

DLV5700 series

DLV7104/8104/8204 series

DLV02/12/16 series

DLV30/45/70 series

*For more information, please visit http://www.nitto-kohki.co.jp/e/ and see our eCatalog here.

DLC0350 DLC0950DLV5720/5720H/5740 DLV5740H/5750

DLV8104/8204series

DLV8154DLV7104 series

DLV02/12/16SL-CKE DLV02/12/16SL-BKE DLC16S

DLV45SL DLV70LPDLV30SL DLV30SP

Nitto Kohki is capturing the needs of users by introducing to the world not only “machine tools and power, tools”, but also next-generation laborsaving devices, including high precision “delvo” electric screw drivers,“Cuplas” quick connect couplings, and linear-motor-driven piston “compressors/vacuum pumps”.

• Torque range : 0.02 - 0.4 Nm• Speed : 450 - 1800 min-1

• Machine screw size : 1.0 - 3.0 mm• Low-shock for tightening• Electro-static discharge (ESD) control


• Machine screw size : 2.6 - 6.0 mm• The clear plastic cover is mounted over the torque

adjustment ring to prevent unintentional changes of the preset torque amount

• Heavy-duty cam installed for maximum cycle life


• Machine screw size : 1.0 - 4.2 mm• Brushless motors are incorporated for maximum tool life• Grounded bit system standard• Universal input voltage from 100 to 240 V AC for easy

installation (DCL16S)


• Machine screw size : 2.6 - 8.0 mm• Brushless motor and newly designed clutch provide a

more consistent torque output over the life of the tool• More accurate torque control and considerably quieter

operation when compared to pneumatic screwdrivers

AC Linear Free Piston CompressorAC Linear Free Piston Vacuum PumpDC Linear Free Piston CompressorDC Linear Free Piston Vacuum PumpAC Linear Diaphragm PumpDC Diaphragm PumpDC Piston Pump• Compact, lightweight, low vibration, low noise level, clean operation and longer durability

Piezoelectric Pump• Compact, lightweight, durable and quiet• Low power consumption and electromagnetic noise• Simple flow rate adjustment

AC Linear Free Piston Blower• Linear blowers for aeration• Low noise and easy maintenance

• Built-in pulse absorption chamber• Many build material options for different liquids• Self-priming type with air suction acceptable

DC Diaphragm Liquid Pump

S a f e t y G u i d e I n d e x

57 58

Safety Precautions

Warning for ALL Machines and Tools

Notice for Electric Tools Notice for Air Tools• Air pressure at the inlet of the tool must not exceed 0.6 MPa (6 kgf/cm2).

• Always keep the work area free from clutter and potentially dangerous conditions such as hanging power cords, working debris, air hoses, and garbage to prevent accidents from occurring.

• Consider proper working environments for each tool carefully. Do not expose tools to extreme amounts of moisture or direct contact with water or rain. Keep area well lit at all times to prevent hidden dangers and never operate the equipment near flammable liquids or in gaseous or explosive atmospheres.

• Keep all tools and tool accessories away from children and all unauthorized personnel. Serious injury or possible death may result from machines being handled by children.

• Properly store machines and accessories while not in use. They should be kept in a dry, locked-up location out of reach of children or unauthorized personnel.

• Improper or negligent use of tools will cause increased maintenance costs, and the amount of time in which to complete the job. Always let the tool do the work at the rate of which it was designed. Best performance is always achieved by reading and understanding the proper operation of each machine or tool.

• Always wear safety glasses and protective hand and foot wear during or around operating tools. Wear a protective hair covering to contain long hair. Do not wear loose clothing and/or accessories as they may be caught in moving parts and inflict serious injury or possible death.

• Wear respiratory protection when working in an environment where dust particles are generated during operation.

• Do not over-reach or allow yourself to become unstable during tool operation and always maintain a correct posture.

• Use clamps or a vise to secure the work piece tightly and eliminate vibration. Never hold the work piece with your hands, keep both hands on the tool for increased productivity.

• Use the right tool or machine that can complete the job within its specifications. Do not attempt to adapt smaller machines or tools to complete a job designed for heavy-duty equipment. Do not use the tools for other than what they were designed for. There is a right tool for each job, be aware of tool limitations and never overload.

• Make sure to inspect all external screws, nuts, bolts and attached accessories are fastened tightly and secure prior to each use. All moving parts should be free from obstruction and allowed to operate smoothly. Any damaged or missing parts should be repaired or replaced by the sales agent or distributor from which the tool was originally purchased. Do not use machines or tools which cannot be activated or stopped with a power switch or lever.

• Do not use any machine with a damaged, frayed, cut, or deteriorated power cords or air hoses. Always replace at the first sign of damage.

• Always remove all tools required to adjust, add, or remove parts from tools prior to use to prevent tool damage or user injury.

• Always avoid an unexpected start by having all power buttons or levers in the off position prior to attaching to a power or air supply. Never carry tools with your finger on the on/off switch or lever when the power or air supply is attached.

• Do not use the power or air supply lines to move, carry or support the tool during usage or transportation. Do not place the power or air line near a heat source, oil, water, or items with sharp edges.

• Never leave a machine or tool running unattended. Keep a firm grip on the designated areas of the machine or tool until it comes to a complete stop. Always turn the power switch or lever to the off position and disconnect from the power source when not in use.

• Do not disassemble or modify a tool to complete a job other than what it was designed for. This will void any warranty on the equipment and may cause serious personal injury or possible death.

• Maintenance is necessary for all machines and tools. Always maintain blades and cutters properly and replace when edges become damaged or are not sharp enough for safe operation. Follow the instruction manual for lubrication needs and adjustment points if applicable. Check the power and air supply lines periodically and change accordingly to safety regulations. If an extension line is adopted, always make sure that it meets or exceeds tool requirements for amperage or air supply before using and is rated for outdoor usage. Change supply lines whenever they are found to be defective or damaged. Keep the grip and handles dry and clean of grease or oil so that it will not disturb proper operation.

• Switch off and disconnect from power source before servicing equipment or changing accessories.

• Be alert and pay close attention to the work being performed at all times. Do not operate machines or tools when heavily fatigued. Users should be aware of all circumstances surrounding their application.

• Use only recommended parts and accessories as per individual machine or tool operator manuals. Use of improper accessories or attachments may result in serious injury or possible death.

• All repairs and services must be performed by authorized Nitto Kohki dealers or technicians.

• Do not deface or remove any label, warning indicator, or nameplate associated with each machine or tool.

• The power source must be limited to the individual tools specifications as stated on the nameplate or instruction manual.

• Make sure that all machine and power tools are properly grounded at all times (excludes double-insulated tools). Always use a GFCI (Ground-Fault-Circuit- Interrupt) to protect the user and surrounding persons from electric shock.

• Be aware of low voltage situations. Improperly gauged extension cords or power cords used or shared with other electrical devices will cause all tools on the line to not run at optimal performance. This condition may result in damage to the machine and/or operator.

Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate each Nitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or tools for reference of safe operation and precautions.

Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could result in serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines should be followed at all times.

A

B

C

E

F

H

J

Prod. No.

013200403090600001091800001160700020160700030061100001184300001135400001135600001016400401074903001074900001075000001111400001101810001101820001101840001101830001101601012101601010101700012136505101TB00390TB00392TB00352TB00354136503001135200001136502000091500001016811401155500401155300101155300501135800300065200101065200301136010201080900001080600001155700001155800001155900001131000201131000102152500401152500601152100001152200001152300001169000171169000181169000191060100001060900001060300001

Description

Atra AceAuto ChiselAir ChipperAir DrillAir DrillJet ChiselAir SonicMini BevelerMini BevelerAtra AcePalm Orbital SanderPalm Orbital SanderPalm Orbital SanderSuper HandBeltonBeltonBeltonBeltonBaby BeltonBaby BeltonBaby BeltonBurr CutterBroach HolderBroach HolderBroach HolderBroach HolderCircuit BevelerCircuit BevelerCircuit BevelerAir ChipperAtra AceHandy SelferHandy SelferHandy SelferCircuit BevelerJet ChiselJet ChiselMini BevelerFree SanderFree SanderSelferSelferSelferHand BevelerHand BevelerPumpPumpSelferSelferSelferHose Reel BalancerHose Reel BalancerHose Reel BalancerJet ChiselJet ChiselJet Chisel

Page

143130484833452727114343434637373737393939471616161627282830519191926343425414118181825251717171717494949333333

Model

A-100A-300ACH-16ADR-100ADR-65AJC-16AL-55AMB-0307AMBL-0307AO-5575APS-125APS-125APS-150ASH-900B-10NB-20NB-20NBB-30NBB-10ABB-10ABB-20BC-005BHM-02035BHM-03050BHM-13075BHM-14075CB-01CB-02CBR-03CH-24CLA-2720E25-0615E55-0619E55-0619ECB-0203EJC-32AEJC-32AEMB-0307BFS-100CFS-50AHA06-1322HA07-1624HA11-1624HB-15BHB-15BHPD-05HPD-05HS06-1322HS07-1624HS11-1624HW-0HW-3HW-5JC-16JEX-20JEX-24

220 - 240 V

220 - 240 VNVL5HNVV5HNVV6H

LeverRing

220 - 240 V220 - 240 V110 - 120 V220 - 240 V220 - 240 V110 - 120 V220 - 240 V220 - 240 V

220 - 240 V110 - 120 V220 - 240 V110 - 120 V

J

L

M

O

Q

R

S

T

W

Prod. No.

060500001060500100061000001180800001184100001018000401170300001074700001078700003078700005111000001111100001072900001072600000130500100130500201075605001075604001075606008075602002075602001075607001074400001015700101015700401015800401169000141169000151169000161090300000090100000090200000151000601151000401110500001111500001110800101169000021169000011169002101169000131169000031169000041169000051169000061169000071169000081169000091169000101169000111169000121017400111017400301018100102018100301016600300

Description

Jet ChiselJet ChiselJet ChiselAir SonicAir SonicAtra AceLine SanderMytonMytonMytonMicro Air HandMicro Air HandMytonMytonMini BevelerMini BevelerMytonMytonMytonMytonMytonMytonOrbital SanderAtra AceAtra AceAtra AceRetractorRetractorRetractorSuper KelenSuper KelenSuper KelenPumpPumpSuper HandSuper Hand LightSuper SawSpring BalancerSpring BalancerRectractorRectractorSpring BalancerSpring BalancerSpring BalancerSpring BalancerSpring BalancerSpring BalancerSpring BalancerSpring BalancerSpring BalancerSpring BalancerAtra AceAtra AceAtra AceAtra AceAtra Ace

Page

33333344447

423535354747363626263535353535364313131349494932323218184645484949494949494949494949494949999911

Model

JEX-28JEX-2800AJT-20L-25BL-35CLO-3550LS-10MAG-50MAGW-40MAGW-40MAH-05MAH-16MAS-40MAS-70MB-03AMB-03AMLG-25MLG-40MLG-50MLG-70MLG-70MLS-20OSV-60AQA-4000QA-4000QA-6500RW-0RW-3RW-5S-1000S-250S-500SC-05SC-05SH-100ASHL-40SSW-110TW-0TW-00TW-06RTW-1RTW-3TW-5TW-9TW-15TW-22TW-30TW-40TW-50TW-60TW-70WA-3500WA-3500WA-5000WA-5000WOJ-3200

220 - 240 V

LeverRing

Japanese110 V230 V

LeverRing

110 - 120 V220 - 240 V220 - 240 V

110 - 120 V220 - 240 V

110 - 120 V220 - 240 V110 - 120 V220 - 240 V220 - 240 V

This catalog is printed using environmentally friendly paper and vegetable oil inks.

Printed in Japan 16DV06- 1Specifications and designs are subject to change at any time without notice.


ISO 9001ISO 14001

ISO 9001JQA-2042Machine Tools Division

ISO 14001JQA-EM4057NITTO KOHKI CO., LTD.

DISTRIBUTED BY

Overseas Affiliates / Offices

NITTO KOHKI CO., LTD.Head Office9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555, JapanTel : +81-3-3755-1111 Fax : +81-3-3753-8791 E-mail : [email protected]

www.nitto-kohki.co.jp/eWeb

NITTO KOHKI U.S.A., INC.46 Chancellor Drive, Roselle, Illinois 60172, U.S.A.For Machine ToolsTel : +1-630-924-9393 Fax : +1-630-924-0303For CuplasTel : +1-630-924-5959 Fax : +1-630-924-1174www.nittokohki.com

NITTO KOHKI EUROPE CO., LTD.Unit A5, Langham Park Industrial Estate, Maple Road,Castle Donington, Derbyshire DE74 2UT, United KingdomTel : +44-1332-653800 Fax : +44-1332-987273www.nitto-kohki.eu/en

NITTO KOHKI DEUTSCHLAND GMBHGottlieb-Daimler-Str. 10, 71144 Steinenbronn, GermanyTel : +49-7157-989555-0 Fax : +49-7157-989555-40www.nitto-kohki.eu/de

NITTO KOHKI AUSTRALIA PTY LTD77 Brandl Street, Eight Mile Plains, Queensland 4113, AustraliaTel : +61-7-3340-4600 Fax : +61-73340-4640www.nitto-australia.com.au

NITTO KOHKI (SHANGHAI) CO., LTD.Room1506, Suite C, Orient International Plaza,No.85 Loushanguan Road, Shanghai 200336, ChinaTel : +86-21-6415-3935 Fax : +86-21-6472-6957www.nitto-kohki.cn

NITTO KOHKI (SHANGHAI) CO., LTD. Shenzhen Branch2005C Shenzhen ICC Tower, Fuhuasanlu 168,Futian District, Shenzhen, Guangdong 518048, ChinaTel : +86-755-8375-2185 Fax : +86-755-8375-2187www.nitto-kohki.cn

NITTO KOHKI CO., LTD. Singapore Branch10 Ubi Crescent #01-62, Ubi Techpark Lobby D, Singapore 408564Tel : +65-6227-5360 Fax : +65-6227-0192www.nitto-kohki.co.jp/e/nksb/index.html

NITTO KOHKI CO., LTD. Bangkok Representative OfficeM&A Business Center, Q-House Convent Bldg.,38 Convent Rd., Silom, Bangrak, Bangkok 10500, ThailandTel : +66-2632-0307 Fax : +66-2632-0308www.nittobkk.com

NITTO KOHKI CO., LTD. India Liaison Office3rd Floor, Building No.9-A DLF Cyber City, Phase-III,Gurgaon, Haryana 122002, IndiaTel : +91-124-454-5031 Fax : +65-6227-0192

NITTO KOHKI CO., LTD. Mexico Representative OfficeOF1109 Torre Corporativo 1 Piso 11 Central Park Armando Birlain Shaffler#2001 Col Centro Sur, Queretaro, Qro, C.P. 76090, MexicoTel : +52-442-290-1234

PUNCHING

CHAMFERING

DEBURRING

GRINDING

SCALING

FILING

PUNCHING

CHAMFERING

BORINGBORING

DEBURRING

GRINDING

SCALING

FILING


Tk126

Pneumatic, Electric & Hydraulic

GENERAL CATALOG

tk126 machine tools power tools & machine tools · 2017-08-26 · power tools & machine...

Documents