to insert your company logo from the insert menu carderock stone select “picture ... ·...
TRANSCRIPT
Carderock® Stone Tri-State Stone® &
Building Supply, Inc. quarriers of Carderock® Stone
www.carderock.com
8200 Seven Locks Road
Bethesda, MD 20817
301-365-2100
301-365-5524 (fax)
Add
Corporate
Logo
Here
To insert your company logo
on this slide
• From the Insert Menu
• Select “Picture”
• Locate your logo file
• Click OK
To resize the logo
• Click anywhere inside the
logo. The boxes that appear
outside the logo are known
as “resize handles.”
• Use these to resize the
object.
• If you hold down the shift key
before using the resize
handles, you will maintain
the proportions of the object
you wish to resize.
Carderock ® Drywall
Stone
• Ideal for dry and
semi-dry stack
retaining walls
• Approximately
3000 lbs. per pallet
• Gives rustic
appearance
Carderock ® Gardenwall
Stone
• Easy to stack, even
for the do-it- yourself
customer
• Quick and easy for
contractors
• Approximately
3000 lbs. per pallet
Carderock® Veneer
Stone • 4” - 6” veneer
• Ideal for houses,
fireplaces, or any
application that requires
a stone veneer
• Vertical, horizontal, &
transverse seams for
workability
• Beautiful color range
• Adaptable to numerous
installation styles and
looks
Carderock® Premium
Snapped Veneer Stone • 4” - 6” snapped
veneer
• Ideal for roughly
squared or ashlar
application
• Minimal trimming or
shaping required
• Beautiful color range
• 40 -45 square feet
per ton
Carderock® Sawn Ashlar
Veneer Stone • 4” - 6” bed depth,
sawn top & bottom
• Split and seam faces
• Sawn ends
• Stock 3.5”, 7.5”,
11.5” rises. Custom
rises available
• 40 -45 square feet
per ton
Carderock® Sawn Ashlar Veneer Installation
Carderock® Thin Veneer Stone
• Thin veneer - 1-1/2 - 2” thick ~ no footing required!
• Real stone - not artificial
• Ideal for any application that requires a thin veneer stone.
Carderock® Thin Veneer Installation
Carderocks TM
• Tumbled Carderock®
Stone - same unique color
range
• Applications include dry
stream beds, water
features, groundcover
Carderock® Chips
Landscape groundcover
Carderock® Flagging
Carderock® Select Boulders
Broad, flat boulders ideal for steppers, water features or specimens
Carderock® Boulders
Available in a full range of sizes and shapes for all your design
specifications
Carderock® Veneer application
Howard Hughes Medical Center - the stone was hand tooled on site
Carderock® Veneer application
Typical housefront - random style
Carderock® Veneer application
Typical housefront – random ashlar
Carderock® Veneer application
Landscape walls/entrance feature
Country club community
Carderock® Veneer application
Carderock® Veneer application
Country Club Addition / Restoration
Carderock® Gardenwall
application
Carderock® Veneer application
Sawed ashlar installation
Patio/sitting wall
application
Pennsylvania flagstone patio with Carderock® sitting wall
The Carderock®
Advantage
• Beautiful color range
• Durable yet easy to work
• No freeze / thaw problems
• Over 85 years experience - family owned and
operated
• Year round production - no seasonal shutdowns
• Unsurpassed quality control
• Nationwide dealer network
• Design assistance always available
Typical Design Drawings
Installing Carderock® Thin Veneer
• Carderock Thin Veneer may be applied over any masonry surface, concrete block, brick, cement, etc. Painted surfaces must be sandblasted, or otherwise stripped of paint. If it is difficult to remove paint or if surface is of frame construction, nail metal lath to wall securely, 6" on center. (For exterior, vapor barrier first, then metal lath) Apply scratch coat (2 parts sand to 1 part cement) to lath. Make certain lath is covered completely with a thin coat (1/2"-3/4" thick). Use a metal scraper or small scrap of lath to lightly rake horizontal grooves in the scratch coat. Allow scratch coat to set up or cure. This is now a masonry surface to which the Thin Veneer may be applied using the following steps:
• Mix rich mortar (2 parts sand to I part cement) to a creamy consistency similar to whipped potatoes.
• Determine if stones will be laid out on ground to the desired fit prior to installation, or if trimming is required to complete finished application.
• Make certain surface is free of dirt, sand, or loose particles. If surface is dry, dampen first with a masonry brush but do not saturate. This prevents the wall from pulling the moisture from the mortar, allowing it to set up both naturally and with a better bond. For cleaner installation, begin applying stone at the top of the wall and work toward the bottom.
• Trowel rich mortar onto wall approximately 1/2" thick.
• Take clean stone and slightly dampen the back side. This frees any dust and again prevents moisture loss from mortar.
• Apply thin coat of rich mortar onto back side of stone. This fills in pits and rises in stone and creates a stronger bond with the wall.
• Press stone into mortar, rotating slightly, forcing some of the mortar to squeeze out freely. Any mortar forced out beyond the finished joint or on the stone surface itself must be removed with trowel, joint tool, or brush before the mortar is allowed to set up. Narrow joints will provide a nicer appearance.
• Use a grout bag to fill all joints (or use trowels). As the mortar stiffens, tool to the desired depth and be sure to brush off all excess.
Tri State Stone and Building Supply, Inc. is a full service stone
dealer. In addition to Carderock® Stone, we sell over 50 other
types of natural stone, including stacking wallstone, flagstone
(both pattern and irregular), veneer, decorative aggregates, and
boulders of all sizes and shapes. Our commitment to quality
products and unmatched service insures the variety of choice you
demand and ready supply for the timely completion of your
project. We do not merely broker these other materials, we stock
them in our yard for immediate delivery. If you have the need for
a natural stone product that we do not have, always ask…. we can
usually find it for you.
Other Natural Stone Products
• ideal for drystack walls
• gray to lilac range
• some moss and lichen
• beautifully weathered
• full range of thickness
available in wallstone
grade
• steppers and boulders
also available
Pennsylvania Fieldstone
Pennsylvania Fieldstone Application
Edinburgh Waterfall Lake
Chesapeake, Virginia
Pennsylvania Fieldstone Application
This project utilized over 700 tons of Pennsylvania fieldstone in various grades –
wallstone, steppers & boulders !
Pennsylvania Fieldstone Application
This spectacular water feature is the centerpiece of an upscale community in the
Tidewater area of Virginia
Pennsylvania Fieldstone Application
The opposite side of the cascade … a 25’ waterfall built with variegated Pennsylvania
veneer
Pennsylvania Fieldstone Boulders
Pennsylvania field stone boulder application
National Gallery of Art - East Building
Washington, DC
Shenandoah Stone
•Buff to gray color
range with dark
highlights
•Wallstone in three
sizes
•Building stone
•Steppers
•Boulders
Pennsylvania flagstone
•Pattern sizes as well as
irregular shapes
•Full color
•Select blue
•Lilac
•Tread stock, sawed 6
sides and thermal treated
Arizona flagstone
A fine grained sandstone
available in a range of
beautiful pastel colors