to use the laser
TRANSCRIPT
Aubrey SmithAmanda Harwell
Sean Carroll
Create a drawing of your part
File Save as>>
Save as a ‘.PDF’
Go to the library
Open the file in Adobe’s Illustrator
Import the PDF to the program
Position your drawing(s)/part(s) where you want them to be cut from your material
make sure the line thickness is set correctly for the desired cut• 0.001 pt = cutting all the way through• A minimum of 1.0 pt = Etching, the line point can be changed to
create various depths for etching depending on you desires • Save your file in Illustrator
•Go to Bonderson
•Go to Mustang 60 Machine Shop
Turn on Air Valve!!!!Turn on vent!!!!
Have your drawing in autocadVector cuts are lined in redEtching the material, lines are in blackScribing the material, lines are in blue