today’s security calls for strength against arms this …€¦ · today’s security calls for...

BALLISTIC SERIES Model 30.06 Non-Ballistic Frame

Today’s Security Calls For Strength Against ArmsThis Door Is Loaded With Ballistic Features

Feature:

• Manganese Plate

• Lock Reinforcements

• Ballistic Plate

• Integrated Subframe

• Adjustable Hinges

Sweep Stud Adjustable Hinges

Benefit:

• Able to withstand destructive Tornado F-5 winds up to 250 MPH (Texas Tech University tested); great added security

• Protects lock from aggressive attacks

• An additional layer of security to resist armed intruders from penetrating the door or disrupting interior security features

• Reduces installation time and expense, precision fit

• Easy to adjust even after installation, Up-down and side-to-side

Certifications:

UL 3 and UL 4 - National Technical Systems (NTS)

Plano, Texas, USA

Panels:

• MDF (Fiber Resin), Pantograph Wood (shown), Aluminum and Laminate

• Colors: RAL Chart, Pantograph Wood (see catalogue)

© 2009 Master Security Doors, Inc.

Master Security Doors, Inc.702 South Military Trail Deerfield Beach, FL 33442

Toll Free 1.866.278.7182 Phone 954.571.7300

Fax 1.866.278.7183 954.571.6601

www.mastersecuritydoors.com

Applications:

Residential (front and back doors, pool door, safe room), apartments, hotels, office buildings, dormitories, industrial buildings, multi-level garages; and wherever high security protection is a concern

FACTORY SPECIFICATIONS Ballistic Series - Model 30.06 Non-Ballistic Frame

© 2009 Master Security Doors, Inc. Conversion: 25.4 millimeters (mm) = 1 inch (in) Specifications subject to change without notice.

Gauge of Frame 14 (2mm)

Gauge of Leaf 18 ( 1.2 mm )

Thickness of Leaf 1.81' ( 46 mm )

Type of metal for frames and Leaf Frame = Pre-filmed in PVC Steel coil Leaf = Galvanized Steel sheet

Rust treatment (Pre-Treated) Frame = Pre-filmed PVC Filmed Leaf = Galvanized Steel sheet

Available Leaf Sizes (Widths and Heights) Standard Sizes

(Sample Tested 37"x 81.10" (940x2060mm)) Width :31-1/2", 33-1/2", 35-1/2" Height : 82- 5/16" (2100 mm)

Available Jamb Widths 2-1/2" (63mm)

Available Jamb Depths 2-7/8" (73mm)

Standards meet or exceeded (ASTM, ANSI etc) ISO/IEC 17025:2005 ANSI/NCSL Z540-1

Certifications (rating, testing agency, test number, configuration) UL3 and UL 4 - National Technical Systems - TX, USA (NTS)

Type of panels (Styles/designs, materials, application guidance, colors) Aluminum, Laminated, Pantograph and MDF. MDF for interior only

Locks (Requirements for use of alternative locksets) CISA (Ingersoll Rand)

Latch Systems and latch adjustment mechanism (adjustment detail) Multilocking System - 2-1/2" (64mm) Backset

Mechanical or Laser cut Keys Mechanical

Available Prepped for Electrical Yes (According to Technical Feasibility)

Door Handing Right or Left

Hinges - Sizes, Number 3 Hinges Assembly: 1x3 Hinge Male (3.030"x2.170") and 1x3 Hinge Female (1.158"x2.520")

Pins (Pins inside the hinges) YES

Studs 5 (Hinges Side of Door)

Reinforcements (thickness, spacing, locations, etc.)Balistic panel (th=6 mm) placed in the external side of the door; Lock reinforcement plate; Manganese Panel (th=2 mm)

Predrilled YES

Pre-hung YES

Primed Frames and Leaf (for no panel options), type of paint, see Amweld steel doors and frames Spec Data sheet 08110 Table 4 - Amweld Paint Specifications))

N.A.

Painted (for no panel options), type of paint N.A.

Paint colors available (for no panel options), type of paint N.A.

Handles (requirements /options for alternate handle sets) Any

Peepholes N.A.

Sweeps (type -standard /optional) Yes

Sills (standard and optional - i.e. handicap) N.A.

Gasketing, seals, weatherstripping (standard and optional) Flexible gasket in "Elaprene"

Electric Locking options (pin pad, card reader, biometrics) CISA mechanical lock only

Frames Install Applications: Concrete, Subframe/Frame, Wood Stud, Steel Stud, Wrap-around

All

Design of Frames: Subframe/Frame, Wrap around, Single Rabbet, Double Rabbet, Cased

OpenALL with exception of Cased Open where 3006NBF door has NO rabbet.

Sub Frame assembly detail Detail With Shop Drawing

Finished Frame assembly detail Detail With Shop Drawing

Anchorage (see installation instructions - number of anchors, type, size, locations, any additional requirements per each model)

Detail With Shop Drawing

Core Materials Polypropolyne

Fire Rating (Standard and optional) N.A.

Temperature Rise Rating N.A.

STC Rating - Tested in accordance with ASTM E90 & E413 N.A.

U-Factor 0.285

R-Factor 3.5

Type of metal seams (i.e. seamless, welded, folded, etc.) Welded , Folded

120 hr continous salt spray test per ASTM B117 N.A.

240 hr continous humidity test per ASTM D4585 N.A.

Physical Endurance (Cycle Testing) (Handles exceed standards) 182,500 for Residential and 255,500 for Non-Residential

Protective film on panel - (packaging /shipping info) Yes

Individually packaged in cardboard (packaging /shipping info) or other packaging method Yes

Fully plastic wrapped (packaging /shipping info) Yes

Door and Frame Construction Certification Labels Available upon request

SDI Level 4

Leaf Ballistic Rating Level (standard and optional) - (i.e Level 1 through Level 8) 1/4" (6mm) Thick.Ballistic - Rating Level 1 through 4

Frame Ballistic Rating Level (i.e. Level 1 through Level 8) N.A.

Ballistic Ratings (ammunition type & associated muzzle /minimum velocities, shell grains)30.06 caliber - 2702 Ft/Sec - 180 grain lead core soft point 44 magnum 240 grain 1377 Ft/sec

Ballistic lockset /handles (standard and optional suppliers) N.A.

Separate Warranty sheet Check with Supplier

Warranty (only if different from the Warranty sheet) Check with Supplier

Component supplier - Manufacturer’s installation instructions and adjustment procedures Check with Supplier

Optional hardware and supported manufacturers (panic release bars, single turn locking capability)

N.A.

Glass (standard and optional) thickness,security and thermal ratings, certification levels N.A.

Storage Requirements Covered and protected area

Any truly special features or functions or options N.A.

Weight of Door (lbs) 500 lbs Approx ( 250 Kg approx )

DRAWINGS Ballistic Series - Model 30.06 Non-Ballistic Frame

©2009 Master Security Doors, Inc. Specifications subject to change without notice.

ORDER OF DRAWINGS

Number Description

30.06 NBF - 01 Ballistic Panel

30.06 NBF - 02 CAL 30.06 Horizontal Section

30.06 NBF - 03 CAL 30.06 Vertical Section

30.06 NBF - 04 Cylinder Lock

30.06 NBF - 05 Frame

30.06 NBF - 06 Horizontal Section

30.06 NBF - 07 Lower Perimetical Profile

30.06 NBF - 08 Lower Perimetical Profile

30.06 NBF - 09 Manganese Panel

30.06 NBF - 10 Metal Leaf

30.06 NBF - 11 Perimetrical Profile

30.06 NBF - 12 Section Door

30.06 NBF - 13 Section Door 1

30.06 NBF - 14 Subframe

30.06 NBF - 15 Vertical Section

30.06 NBF - 16 Material List


Item

Description

No.

Material

1

Frame

1

Hot zinc plated pre-filmed th= 17/10mm

2

Reinforcement

1

Sheet-steel Th=12/10mm

3

Central reinforcement

1


4

Upper bolt

1


5

Bracket

8

Decaped sheet-steel th=50/10mm

6

Spongy insulator

1

Sponge Th=40/10mm

7

Vertical connecting rode

2

Steel

8

Seeger

4

Plastic material

9

Lock reinforcement plate

1


10

Cylinder lock

1

Cylinder lock Cisa 56515-48-0-00ST

11

Lock fixing screw

2

TC M6x35 ZNT

12

Interior panel

1

Medium tanganyka

13

Lower bolt

1


14

Fixing screw

2

M5x30 ZNA3B

15

Bracket for frame assembly

2

Sheet zinc steel Th=25/10mm

16

Metal leaf

1


17

Balistic panel

1

ARMOX 500T Th=60/10mm

18

Polystirene sheet-internal side

1

Polystirene

19

Exterior panel

1

Medium tanganyka

20

Hinges plate

3


21

Stud

5

Steel

22

Fixed Knob

1

Bronze

23

Conic protection

2

Steel

24

Subframe

1

Pre-painted sheet Th=19/10mm

25

Basket

3

Type 65/1

26

Perimetrical profile

3

Hot zinc plated pre-filmed Th= 17/10mm

27

Handle

1

Bronze

28

Conic protection

2

Steel

29

Weather strip

1

----

Item

Description

No.

Material

30

Lower perimetrical profile ext. side

1


31

Lower perimetrical profile int. side

1


32

Polystirene panel-

metal leaf side

1

Polystirene

33

Hinges

3

Steel

34 Manganese Panel 1 Manganese Th=20/10mm

today’s security calls for strength against arms this …€¦ · today’s security calls for...

Documents