toll-free: 1 (877) 934-2444 - wiedmann bros multi-fit accessories description part no. crossover...
TRANSCRIPT
In 1906, an immigrant from Germany, Jakob Wiedmann, had an idea to open up a store in his hometown of Venturia, North Dakota. This idea was realized as a local “Bazaar” called Wiedmann Brothers Hardware. Farmers and homesteaders could come to purchase any and all of the goods that they needed. From coffee and lantern oil, to hunting supplies and farming implements, at Wiedmann Brothers Hardware, anything a person could ever need was gathered under one roof.
Wiedmann Bros. was originally conceived to be a division of Firebird Fiberglass, the leading fiberglass tractor canopy manufacturer in North America, owned by my dad, Jim Wiedmann. In 2006, on the 100th Anniversary of the original hardware store, Wiedmann Bros. Distributing Co., LLC was formed independently.
Our goal is to support authorized John Deere dealers with the highest quality aftermarket accessories for tractors, utility vehicles, and mowers at fair prices with excellent customer service.
We sincerely hope that you will choose Wiedmann Bros. as your primary source for quality aftermarket accessories. As always, we are grateful for your friendship, and your business. We look forward to working with you.
Best regards, and good selling!Matt WiedmannFounder
Toll-Free: 1 (877) 934-2444Phone: 1 (623) 934-8973Fax: 1 (877) 828-4448
Address: 7411 Laurel Canyon Blvd., Unit 3 North Hollywood, CA 91605
Office Hours: 7:30am - 4:30pm PST
CROSSOVER UTILITY VEHICLE ACCESSORIESAccessories for the John Deere GatorXUV 550, 550 S4, 625i, 855d, 620i, 850d, and HPX
5MULTI-FIT ACCESSORIES
TRADITIONAL UTILITY VEHICLE ACCESSORIESAccessories for the John Deere Gator TS, TX, TH, TE, Original 4x2 and 6x4
TRACTOR ACCESSORIES
LAWN TRACTOR ACCESSORIES
28
38
PROGATOR UTILITY VEHICLE ACCESSORIES 44
46
MOWER ACCESSORIESAccessories for the John Deere Zero Turn and Golf & Turf Mowers
TABLE OF CONTENTS
54
61
TABLE OF CONTENTS
5
MULTI-FIT ACCESSORIES
DESCRIPTION PART NO.
Drink Cage AR-UODC
Drink Cage
» Fits any 1.75” or smaller bar» Holds 20 ounce bottle
DESCRIPTION PART NO.
Vertical Tool Holder AR-USNV
Vertical Tool Holder» Fits any 1.75” or smaller bar» Holds 1.25” dia. wood and
fiberglass tools
DESCRIPTION PART NO.
Striking Tool Holder AR-URRT
Striking Tool Holder» Fits any 1.75” or smaller bar» Rotates 360 degrees» Grommets hold secure
DESCRIPTION PART NO.
Flashlight Holder AR-URRF
Flashlight Holder» Fits any 1.75” or smaller bar» Rotates 360 degrees» Grommets hold secure
DESCRIPTION PART NO.
Double Rod Holder AR-UCR2
Double Rod Holder» Fits any 1.75” or smaller bar» Reel slides into channel and
locks
DESCRIPTION PART NO.
Comm Holder AR-UC1
Comm Holder» Fits any 1.75” or smaller bar» Carries GPS, phones, radios,
MP3 players
DESCRIPTION PART NO.
Uno Gun/Bow Holder AR-UNO
Uno Gun/Bow Holder» Fits any 1.75” or smaller bar» Compression rubber cushions
& holds tight
DESCRIPTION PART NO.
Bucket Binder AR-UBB1
Bucket Binder» Fits any 1.75” or smaller bar» Holds 4-5 gallon buckets or
water jugs
MULTI-FIT ATTACHMENTS
6
MULTI-FIT ACCESSORIES
DESCRIPTION PART NO.
Crossover Tool Box KP-2691
Crossover Tool Box
» Bed Dimensions: 43.75” min x 54” max» Lockable gull wing doors» Scissors-type locking strut hold lids
open for convenient access
DESCRIPTION PART NO.
Window Mount Suction Cup Grips KP-21520
Window Mount Suction Cup Grips» Off-set mounting to maximize rack space» Rubber securing straps
DESCRIPTION PART NO.
Rhino Grip XL UTV Mount KP-21535
» Mounts directly to UTV roll bar » 360 degree rotation for every need» 180 tilt feature (45 increments)» Sold as a pair
Rhino Grip XL UTV Mount
DESCRIPTION PART NO.
Ratcheting Rhino Grips KP-21540
Ratcheting Rhino Grips» Ratcheting design allows for securing items
from 1-4 inch diameter» Kwik clip design for on/off rotational in field
adjustments» Quick release button opens the grip quickly for
easy access to gear
DESCRIPTION PART NO.
Saddle Storage Box - single KP-4408
Saddle Storage Box
» Easy installation to the inside bed rails of your UTV» Available as a pair or single» Dimensions: 26.875” l x 4.875” w x 14.75” h (each)
DESCRIPTION PART NO.
UTV Grab/Sport Handles (black) VDP-50769315
UTV Grab/Sport Handles
» Easy in and out access to your UTV» Heavy-duty neoprene construction
7
MULTI-FIT ACCESSORIES
DESCRIPTION PART NO.
Saw Press - Steel Bed KP-20044
Saw Press - Poly Bed KP-20044JD
Saw Press
» Safely transports a chainsaw» Fits chainsaws with up to 24” bar» Tough rubber pads cushion powerhead» Adjusts up to 45 degrees
DESCRIPTION PART NO.
Saw Boot KP-20600
Saw Boot
» Secure and protect your chain saw to your UTV» Accommodates saw bars up to 20”» Requires Boottector Bracket» Works best with Metal Loop Bracket
DESCRIPTION PART NO.
4 Gallon Fuel Pack KP-89135
Pack Mount (single) KP-89435
4 Gallon Fuel Pack
» High-density polyethylene, legal in all 50 states
» Mount using 4 included 1” wide Velcro straps or mount using 2 optional pack mounts (SOLD SEPARATELY)
DESCRIPTION PART NO.
Fuel Pack Jr. w/ Bracket - Steel Bed KP-89735
Fuel Pack Jr. w/ Bracket - Poly Bed KP-89735JD
Fuel Pack Jr. with Bracket
» Puncture resistant, crush proof, high-density polyethylene
» 1.5 gallon capacity
DESCRIPTION PART NO.
Fuel Pack Jr. w/ Pack Mount KP-89195
Fuel Pack Jr. with Pack Mount
» Puncture resistant, crush proof, high-density polyethylene
» 1.5 gallon capacity
Gun Boot IV Loop Bracket
» All-metal constructed loop bracket» Fits Gun Boot® IV and Gun Boot® 6.0 cases only» Also works with Saw Boot
DESCRIPTION PART NO.
Gun Boot IV Loop Bracket KP-20032
8
MULTI-FIT ACCESSORIES
TO12V
TO
Amplified Sound Bar
» Powerful 200 watt, 6 speaker sound bar» 12’ Aux cable works with any iPod/MP3» 12’ power cord plugs into 12 volt source» Marine grade speakers: (2) 6” woofers (2) 2” mid-range, and (2) 1” tweeters» Easy to install!
DESCRIPTION PART NO.Amplified Sound Bar - Bracket Sold Separate
VDP-792501RCA
FREE Docking Station
(iPod/MP3 player not included)
AUDIO
Roof Mount Audio Console
» Marine waterproof retractable cover protects the DEH Pioneer CD Player
» MP3/WMA/MAV playback with volume and memory settings
» Connect your portable devices directly through the front AUX input
» Optional high intensity dome-light
» Includes a high quality AM/FM
DESCRIPTION PART NO.Roof Mount Audio Console - Standard (Black) TT-RMT
Roof Mount Audio Console - Dome Light (Black) TT-RMTTD
Roof Mount Audio Console - Dome Light (Camo) TT-RMTTC
XUV Bracket Kit TT-RMTGATOR
antenna.» Marine speakers are
water, UV, and corrosion resistant and have a one piece molded grill for speaker protection and durability.
Amplified Sound Wedge
» Powerful 100 watt built in amplifier» 12’ Aux cable works with any iPod/
MP3» 12’ power cord plugs into 12 volt plug» (2) marine grade 6.5” woofers/mid-
range speakers and (2) tweeters» Mounts to any roof, or 1.5” - 2” roll
bars» Separate docking station for iPod/
MP3
DESCRIPTION PART NO.Amplified Sound Wedge VDP-4035A
TO12V
TO
FREE Docking Station (iPod/MP3 player not
included)
Roll Bar Mount
Roof Mount
Fits: Any UTV or tractor with a hard roof
9
MULTI-FIT ACCESSORIES
Diamond Plate Aluminum Bed Cover
DESCRIPTION PART NO.Polished Aluminum - Steel Bed DB-JGX08C
Black Line-X Coating - Steel Bed DB-JGX08CX
» Total security for your Gator® cargo box» Locks BOTH the cover and the tailgate with one keyed lock» Designed so that the large door panel can be removed in seconds,
providing you full use of your bed for any hauling situation» Haul up to 250 lbs. ON TOP» .063” diamond plate aluminum» Stainless steel exterior hardware» Keep weather out with the 3/4” neoprene gasket» 5356 alloy TIG welds
Polished Aluminum
Black Line-X Coating
Hitch-Step» Fits 2” receiver» Constructed of aircraft aluminum» 300 lb. weight limit
DESCRIPTION PART NO.UTV Hitch-Step GD-UHS300
Your choice of Polished Aluminum or Line-X coating!
Black LINE-X finish provides superior anti-slip finish
for ultimate traction and control!
BEDACCESSORIES
Not available for poly bed
Diamond Plate Aluminum Drop-In Bed Box» Dimensions: 48” W x 42” L» Box lid can be quickly removed for open bed storage» .080” diamond plate aluminum with stainless steel hardware
DESCRIPTION PART NO.Polished Aluminum - Fits XUV Full-Size 2010 & Newer DB-JG10B
Black Line-X Coating - Fits XUV Full-Size 2010 & Newer DB-JG10BX
10
MULTI-FIT ACCESSORIES
UTV Quick Quench Foam Fire Unit
DESCRIPTION PART NO.
5.5 HP Honda Manual Rewind on Pump RK-196216A
9 HP Honda Electric Start with Recoil Backup Engine on Pump RK-196216C
FIRE&RESCUE» 2 different engine types available» Hannay manual hose reel with 70 feet of 3/4” Good year booster hose» 70 gallon water/5 gallon foam copoloy tank with lifetime warranty» Twister 1024 forestry nozzle and PAC nozzle holder» Stainless steel piping with lifetime warranty» Pump and piping to match your color code» Liquid filled discharge pressure gauge» Aircraft/marine alloy skid platform» Mounting Hardware for your vehicle» 1-1/2” tank to pump valve» 1-1/2” aux. suction valve» 1-1/2” rear discharge valve» 1” hose reel valve» 1” recirc valve» 940 lbs w/ fluids (196216A)» 966 lbs w/ fluids (196216C)
» 100 gallon copoly tank with 8 gallon foam cell with lifetime warranty» Hale HPX75-B11 pump with 11hp Briggs & Stratton intec 4-stroke engine,
electric start with recoil backup and voltage regulator, easy oil change valve, hourmeter and control panel built on engine
» RKO stainless steel piping with lifetime warranty» RKO quick quench foam system (free)» Hannay electric hose reel with (1) hose reel activation switch» 100 feet of 3/4” goodyear booster hose» TFT 1024 forestry nozzle with pac nozzle holder» Paint to your color code» 12 volt power supply» 2” tank to pump valve» 1 1/2” aux. suction valve» (2) rear discharges» 1” recirc fill valve & 1” hose reel valve» Mounting hardware» 1,210 lbs. with fluids
DESCRIPTION PART NO.
Top Mount Fire Unit RK-1962702
Top Mount Fire Unit
Each order is custom built for correct mounting & color matching to vehicle.
11
MULTI-FIT ACCESSORIES
Deluxe Aluminum UTV Firefighting Offroad Trailer» 95 gallon copoly tank with 5 gallon integral foam cell» Quick quench foam system» Darley/Davey high performance fire pump system with 9 HP Honda electric start engine with recoil backup» Heavy duty aircraft alloy aluminum trailer/lightweight construction with roll around jack stand/foot plate included» Independent torsional axle for smooth ride» Tool storage» Steel wheels with standard tires» Stainless steel piping with lifetime warranty» Hannay manual hose reel with 70 feet of 3/4” red booster hose and 1” forestry nozzle» discharge pressure gauge» 1-1/2” discharge; 1” discharge; 1” recirc-fill; 1” to hose reel» Capable of drafting to 18 feet
DESCRIPTION PART NO.
Deluxe Aluminum UTV Firefighting Offroad Trailer RK-1962306
UTV Rescue Skid with Provider Seat» Heavy-Duty Aircraft/Marine Alloy Aluminum Skid Platform» Junkin JSA 200 Stokes Basket» Stainless Steel Mounting Hardware» (4) Max Strap Stokes Securing» 172 lbs. without patient/person
DESCRIPTION PART NO.
UTV Rescue Skid with Provider Seat RK-196218
» Heavy duty aluminum construction» Low profile design» Patient transport system with JSA200 stokes basket» Adjustable attendant seat with seat belt» Storage drawer under Patient Transport System» Oxygen bottle holder» (2) IV bag clips» Available in tough and corrosion resistant copolymer plastic» 398 lbs. without patient/person
Deluxe Medical/Rescue Skid with Storage
DESCRIPTION PART NO.
UTV Skid Unit - Deluxe Medical/Rescue RK-196217
Shown with Optional Floats
12
MULTI-FIT ACCESSORIES
12 Volt Ceramic Heater 12 Volt Metal Fan
Off Road Hydronic Cab-Heater (UTV Installation Kit Sold Separately)
Installation Kit for Off Road Hydronic Cab-Heater (Heater Sold Separately)
» 300 Watts, 12 Volt» 15 Amp rating» 12 Gauge 15’ power cord» 3 speed adjustable fan» Direct hook up to your battery
DESCRIPTION PART NO.12 Volt Ceramic Heater RP-681
» 2 Speed Metal Fan» 7’ power cord» Mounts to any flat surface» Ball swivel base allows for adjustment
DESCRIPTION PART NO.12 Volt Metal Fan RP-1179
» Compact size - allows mounting in tight areas» As low as 1/2 of an AMP - Long hours of heat without draining your battery» Universal mounting system» Integrated switch - No wiring or mounting needed» Variable speed - Set the fan speed to your comfort level
DESCRIPTION PART NO.0.5 Amp Off Road Hydronic Cab Heater AH-EXE200100
2 Amp Off Road Hydronic Cab Heater AH-EXE200200
DESCRIPTION PART NO.UTV Installation Kit for Off Road Hydronic Cab Heater AH-PLE200150
HEAT&AIR
SELLERBEST
» Added protection while driving your Gator®» Protected from branches, stones, and other items that could find
their way through the floor of your Gator® over time.» Available in a black LINE-X finish, which acts as an anti-slip finish
that can help give you some extra traction and control» Cut specific to the Gator® to give you that tough, outdoor, off-road
look
DESCRIPTION PART NO.XUV, HPX, TX, and TH Diamond Plate Aluminum Floor Mats - (Polished Aluminum) DB-JG08FM
XUV, HPX, TX, and TH Diamond Plate Aluminum Floor Mats - (Black Line-X) DB-JG08FMX
XUV 550 Diamond Plate Aluminum Floor Mats - (Polished Aluminum) DB-JG512FM
XUV 550 Diamond Plate Aluminum Floor Mats - (Black Line-X) DB-JG512FMX
XUV 550 S4 Diamond Plate Aluminum Floor Mats - (Polished Aluminum) DB-JG512FMC
XUV 550 S4 Diamond Plate Aluminum Floor Mats - (Black Line-X) DB-JG512FMCX
Optional Black LINE-X finish provides superior anti-slip finish for ultimate traction and control!
FLOORMATSDiamond Plate Floor Mats
13
MULTI-FIT ACCESSORIES
DESCRIPTION PART NO.Cargo Box Gun Mount Kit - Includes (2) Gun Boot 6.0 Transport KP-26700
In-Bed Double Gun Boot 6.0 Mount for 47.5-55” Steel Bed KP-20005
Cargo Box Gun Mount Kit» Mounting location does not interfere with rear visibility» Compact design allows plenty of bed space» Fits vehicles with bed dimension: 47.5” min - 55” max» KP-20005 is MOUNT ONLY
DESCRIPTION PART NO.Ratcheting Rhino Grips KP-21540
Ratcheting Rhino Grips» Soft cross pattern rubber grips provide increased cushioning and gripping
power for items in a variety of shapes and sizes
DESCRIPTION PART NO.Gun Mount KP-20073
UTV Gun Mount Adapter Plate KP-20074
Gun Mount» Mounts to the floor of your UTV for easy access» Adjustable with molded v-blocks and rubber straps to support firearm and barrel» Adjustable height from 27 1/2” to 35 1/2”
DESCRIPTION PART NO.Boottector Bracket -Steel Bed KP-20035
Boottector Bracket» Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only!» Mounts to steel bed rail» Adjusts without the use of any tools» Offers precision gun angle adjustability
HUNTINGGEAR
Adapter Plate Sold Separately
14
MULTI-FIT ACCESSORIES
Mossy Oak Breakup
Realtree All-Purpose
Gun Boot IV
DESCRIPTION PART NO.Gun Boot IV (Black) KP-20051
Gun Boot IV (Mossy Oak Breakup) KP-20061
Gun Boot IV (Realtree Hardwoods) KP-20071
Gun Boot IV (Realtree All Purpose) KP-20091
Gun Boot 6.0» Features the largest interior room of all Kolpin Gun Boot® cases» Fits up to 51” firearm» Includes nylon liner (Impact Model)» Includes soft interior carrying case (Transport Model)» Provides ample room for 60mm scopes» Utilizes all existing Gun Boot® IV brackets (sold separately) in
order to mount to your Gator®
DESCRIPTION PART NO.Gun Boot 6.0 (Impact - Black) KP-20025
Gun Boot 6.0 (Transport - Black) KP-20020
Black
Transport™ model also includes a separate soft carrying gun case (shown above) that fits within the hard case instead of the standard Impact™ liner.
Impact™ model includes a removable, shock absorbing foam and nylon Impact™ liner (not shown) that provides superior interior protection
» Most popular and versatile Gun Boot case for over 10 years!» Ergonomically designed handle and molded attachment points for a sling» Designed to accomodate left and right hand bolt action rifles and shotguns
RealTree Hardwoods
Double Gun Boot IV Mount» Safely carries two Gun Boot® IV cases only» Heavy gauge steel with multiple attachment points» Mounts to rear mesh or center roll bar tubing
DESCRIPTION PART NO.
Double Gun Boot IV KP-20036
Gun Boot IV Metal Bracket» Metal, two-piece brackets mount your gun boot
horizontally on the bed rail» Fits the Kolpin Gun Boot IV case only
DESCRIPTION PART NO.Gun Boot IV Metal Bracket KP-20129
Gun Boot IV Loop Bracket» All-metal constructed loop bracket» Fits Gun Boot® IV and Gun Boot® 6.0 cases only» Also works with Saw Boot (see pg. 7)
DESCRIPTION PART NO.
Gun Boot IV Loop Bracket KP-20032
LIMITED STOCK
15
MULTI-FIT ACCESSORIES
Power-Ride Gun Rack
DESCRIPTION PART NO.
Power-Ride Gun Rack GD-UVPR900
» Fits UTV frames 49” - 62” wide» Aircraft aluminum construction» Powder coat finish» Soft cradles with velcro straps
Power-Ride Bow Rack
DESCRIPTION PART NO.
Power-Ride Bow Rack GD-UVPR901
» Fits UTV frames 49” - 62” wide» Aircraft aluminum construction» Cradle grips the limbs of any bow and prevents any
other part from touching anything
Power-Ride Crossbow Rack
DESCRIPTION PART NO.
Power-Ride Crossbow Rack GD-UVPR901CB
» Fits UTV frames 49” - 62” wide» Aircraft aluminum construction» Cradle grips the limbs of any bow and prevents any
other part from touching anything
Quick Draw Gun Rack» Universal mounting» Holds 2 guns (shotgun, rifle, or muzzleloader)» Unique velcro straps» Quick and easy installation
DESCRIPTION PART NO.
Quick Draw Gun Rack GD-QD800
Quick Draw Bow Rack» Provides Security and Quick Access» Holds 2 bows» Constructed of aircraft aluminum» Weighs only 8 lbs.
DESCRIPTION PART NO.
Quick Draw Bow Rack GD-801S
DESCRIPTION PART NO.Overhead Gun Rack GD-QD855OGR
Overhead Gun Rack» Super-soft rubber gun clips that provide easy
access and secure transport» Installs on Gators with regular tops (WILL NOT
WORK) on tops that prevent access to rear top frame
16
MULTI-FIT ACCESSORIES
UTV Powerloader» Load big game, firewood, tool-boxes, ice-chests, saks of feed or seed, bales of hay, building materials, fence posts you name it! Without physically lifting one
pound!» Turn 2 and 3-man jobs into routine, single-handed tasks. The PowerLoader will even enable you to do chores that you thought you were no longer capable of
handling» At the push of a button, the patented telescopic lifting arms of the PowerLoader retract and curl in seconds to eliminate leverage-moving loads of up to 350 lbs.» Installs onto your UTV in just minutes!» Loads up to 350 lbs from ground to “locked and loaded” - ready for transport» Constructed of super-tough aircraft aluminum» Weighs only 29 lbs» Powered by any factory or aftermarket winch (Minimum 2000 lb winch Recommended - SOLD SEPARATELY)
DESCRIPTION PART NO.Power Loader GD-PL250
Power Loader UTV Mounting Bracket (Required for HPX/XUV)
GD-PLUTG
Winch Sold Separately - See page 26
Gun Boot 4.3 with Bracket» Includes Gun Boot® case and bracket» Gun Boot® IV case convenience with Gun Boot® III case type mount!» Removable, shock absorbing foam and nylon Impact™ liner included
DESCRIPTION PART NO.
Gun Boot 4.3 with Bracket KP-20053
Road Dog Kennel» Constructed of aircraft aluminum» Accommodates dogs weighing up to 100 lbs.» Weighs only 22 lbs» 20.5” high, 24” wide, 32” deep DESCRIPTION PART NO.
Road Dog Kennel GD-RD100
17
MULTI-FIT ACCESSORIES
Implements - 43” Chisel Plow-Cultivator
Implements - 48” Cultipacker
Implements - 72” Cultipacker
DESCRIPTION PART NO.43” Chisel Plow KZ-003500
43” Drag Harrow (Optional) KZ-003800
Turning Shovel Kit (Optional) KZ-003801
» Electric lift with operator controls» 13.5” dia. cutting coulter» 5 rigid, 1 3/8” square shanks» Adjustable and quick remove shanks» 9” wide cultivator sweeps» Narrow chisel points included for hard ground» 43” cutting width
Create that trophy deer or wildlife food plot, new lawn or garden. In many cases the standard tow behind UTV disk harrow or UTV field cultivator with spring shanks can only create a shallow seedbed. Equipped with rigid shanks which are capable of easily creating deep seedbeds which in many cases translates to a stronger, faster growing crop. It can also be equipped with an optional drag harrow and a turning shovel kit for working in sod conditions.
DESCRIPTION PART NO.48” Cultipacker KZ-003503
Cat. 1, 3-point hitch kit KZ-003803
Wheel Kit - flip over design KZ-003802
» 32, 9.5” dia. cast iron packer wheels with crushing knobs (agricultural quality)» Optional wheel kit with 13/600 x 6, 2 ply» Pneumatic turf tires (optional)» 72” packing width» Quick remove tongue hitch pin» 384 lb. weight» Optional 3-point hitch kit» Solid steel shaft with agricultural quality greasable bearings
DESCRIPTION PART NO.72” Cultipacker KZ-003502
Cat. 1, 3-point hitch kit KZ-003803
Wheel Kit - flip over design KZ-003802
» Provides proper seed to soil contact, which translates to faster, more dependable seed germination.
» Made up of 21 individual agricultural quality cast iron packer wheels
» Flip over lift method» 21, 9.5” diameter, cast iron
packer wheels with crushing knobs (agricultural quality)
» 13/600 x 6, 2 ply pneumatic turf tire
» 48” packing width» Quick remove tongue hitch pin» 272 lbs without added weight» Weight rack included» Solid steel shaft with agricultural
quality gearable bearings
48” Pull Behind Drag Harrow» Attaches quickly to your UTV to help loosen compacted dirt» With the steel teeth forward and down, it cultivates, prepares seed beds and rakes up
dead forage» Design allows operation in different direction for ground penetration or as a drag mat» 4’ w x 5 1/2’ l = 22 sq ft
DESCRIPTION PART NO.48” Heavy Duty KP-86820
IMPLEMENTS
18
MULTI-FIT ACCESSORIES
AcrEase Pull Behind Finish Cut Mowers
VEHICLE TYPE PART NO.Class: Homeowner 40” 12.5 HP OHV Briggs & Stratton (Model # H40B) KZ-003729
Class: Homeowner 60” 19.5 Briggs & Stratton intek AVS (Model # H60B) KZ-003722
Class: Commercial 60” 18 HP OHV Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model # C60V)
KZ-003732
Class: Professional 60” 23 HP OHV Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model # Pro60V)
KZ-003730
These are great for providing an excellent manicured lawn at high mowing speeds. Built in heavy duty homeowner, commercial and professional grades. AcrEase mowers can either trail directly behind the tow vehicle or trail to the side. Tow an AcrEase with most any UTV, small riding mower, zero turn radius mower, or small tractor!
AcrEase Pull Behind Rough Cut Mowers
VEHICLE TYPE PART NO.Class: 44” Rear Discharge 19.5 Briggs & Stratton Intek AVS (Model # MR44B) KZ-003725
Class: 44” Rear Discharge 18HP OHV Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model #MR44V)
KZ-003733
Class: 57” Rear Discharge 23 HP Briggs & Stratton Intek OHV (Twin Cylinder) (Model # MR55B)
KZ-003724
Class: 57” Rear Discharge 20 HP Kohler Command OHV (Twin Cylinder) (Model # MR55K)
KZ-003709
Electric Clutch Blade Engagement 20 HP Kohler Command OHV (Twin Cylinder) (Model # MR55KE)
KZ-003721
Electric Clutch Blade Engagement 23 HP Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model # MR55VE)
KZ-003734
These are great all around mowers that are capable of tackling heavy brush and tall grass, field or pasture mowing, food plots, or just as a trail cutter. These heavy duty brush mowers come in several different engine sizes and blade engagement clutch methods. AcrEase rough cut models offer the highest horsepower and heaviest built decks on the market for pull behind UTV mowers.
DESCRIPTION PART NO.
Wetlands Kit KZ-003905
Wetlands Kit» Doubles tire ground surface contact» Great for marshy areas» Easy to install
DESCRIPTION PART NO.
H40B, H60B, C60V Tongue KZ-900084
Pro60V Tongue KZ-900083
Finish Cut UTV Tongue» Allows offset position» Quick maneuverability & stability» Included w/ all Rough Cut Mowers
DESCRIPTION PART NO.
Floatation Kit Call for Part #
Floatation Kit» Great for mowing around ponds
or uneven ground where scalping can occur
DESCRIPTION PART NO.
Electric Lift Kit (57” Rough Cut Models)
KZ-003909
Electric Lift Kit(44” Rough Cut Models)
KZ-003912
Electric Lift Kit» 1500 lb linear actuator» Allows for quick cutting height changes» In-cabin switch
19
MULTI-FIT ACCESSORIES
DirtWorks UTV 3-Point Hitch System
How to order...
Choose hitch & suspension lockout(if applicable)
Add the accessory toolbar
Add the 3-Point hitch system
Choose your implements
STEP 1
STEP 3
STEP 2
STEP 4
Shown with Cultivator SetItem No.: KP-86100
Heavy Duty 3-Point Hitch
Chisel Plow/Scarifier
Accessory Toolbar
Landscape Rake
Rear Blade
Disk Plow
» 12v electric actuator lift system» 20 amp maximum current draw» 15” vertical lift at the drawbar» 300 lbs of downforce
DESCRIPTION PART NO.Heavy Duty 3-Point KP-WHS03HD
Trick your UTV into thinking it’s a tractor with the Dirtworks system! The innovative features incorporated into the DirtWorks 3-point hitch provide quick, easy installation and adjustments without the need for tools. But we didn’t stop there. We added a heavy duty actuator that does the heavy lifting for you while providing 300lbs of down force for serious ground engagement. Just a push of a button raises and lowers the implement to the precise location so you no longer have to adjust implements, cutting depth or work height by hand.
» Heavy duty steel construction» Black powder coat finish» Required for all attachments
DESCRIPTION PART NO.48” Accessory Toolbar KP-ATB48
60” Accessory Toolbar KP-ATB60
» Five position angling» Available in 48” & 60” width» 13” blade height» Optional box scraper attachment
DESCRIPTION PART NO.48” Rear Blade KP-FRB48
60” Rear Blade KP-FRB60
» (6) 1/2” hardened steel plow teeth» Loosen hard pack surfaces» Adjustable height for transport» Great for use with rear blade
DESCRIPTION PART NO.Chisel Plow/Scarifier KP-86100
» 60” width» (21) 1 5/16” rake tines» Great for horse corrals, trails, and
beaches
DESCRIPTION PART NO.Landscape Rake KP-LSR60
» 54” width» (2) 4 disc gangs» 14” notched disc blades
DESCRIPTION PART NO.Disk Plow KP-DP8
20
MULTI-FIT ACCESSORIES
LED Lights
LED Dually - Single LED Dually - Double (Pair)
Combo LED Light Bar
30” & 40” Combo Light Bar
DESCRIPTION PART NO.
6” Combo Light Bar KP-97915
6” Combo Light Bar» Dimensions: 7 3/8” L x
3.625”W x 3.375” H» Current Draw: 1.73 Amps,
Watts: 23.4, Output: 2160 Lummens
DESCRIPTION PART NO.
10” Combo Light Bar KP-97920
20” Combo Light Bar KP-97925
10” & 20” Combo Light Bar» 10” Dimensions: 11 3/8” L x 3.625” W x 3.375” H» 10” Current Draw: 2.89 Amps, watts: 39, Output: 3600
Lummens» 20” Dimensions: 21 3/8” L x 3.626” W x 3.375” H» 20” Current Draw: 5.78 Amps, Watts: 78, Output: 7200
Lummens
DESCRIPTION PART NO.
30” Combo Light Bar KP-97930
40” Combo Light Bar KP-97935
» 93% Optical Efficiency» Shockproof/Waterproof» 50,000+ Hour Life Span» Easy Two Wire Installation» Flood reflectors on the
outside of the light and spot reflectors on the inside half of the light
» Optimize both functional light spread and light distance for increased visibility
» 30” Dimensions: 31 3/8” L x 3.625” W x 3.375” H» 30” Current Draw: 8.67 Amps, Watts: 117, Output: 10800 Lum-
mens» 40” Dimensions: 41 3/8” L x 3.625” W x 3.375” H» 40” Current Draw: 11.56 Amps, Watts: 156, Output: 14400
Lummens
» Plug and play wiring harness with switch» No warm up, instant on/off» No hot spots» 10-50V DC input» No vibration or bouncing beams» 100% optically clear lens» Zero UV emissions» IP68 rating» Waterproof» Offroad use only
» 4 LED lights in a compact package» Small 3” - 3” dimension, this light can
fit anywhere» 1.1 Amps 15 watts 1300 Lumens
» 4 LED lights in a compact package» Small 3” - 3” dimension, this light can fit anywhere» 1.1 Amps 15 watts 1300 Lumens
DESCRIPTION PART NO.
LED Dually - Single (Flood Pattern)
KP-97905
LED Dually - Single (Spot Pattern)
KP-97906
DESCRIPTION PART NO.
LED Dually - Double (Flood Pattern)
KP-97910
LED Dually - Double (Spot Pattern)
KP-97911
LIGHTS
Clamp Kit» 3 piece adjustable clamp system» Mount your new lightbar to any
size tubing from 1” - 2”» Allows you to mount your light bar
at any angle» Easy installation
DESCRIPTION PART NO.
1.75” Clamp Kit KP-97971
Light Bar Cradle» Alternate option to mount your
light» Use on existing tabs, flat surfaces,
or anywhere traditional mount won’t work
» Powder coated black for durable finish
» Easy installation
DESCRIPTION PART NO.
6” Lights Cradle KP-97980
10” Lights Cradle KP-97981
20” Lights Cradle KP-92982
30” Lights Cradle KP-97983
40” Lights Cradle KP-97984
21
MULTI-FIT ACCESSORIES
» Aircraft aluminum construction» Weighs only 22 lbs, but has a 400 lb capacity» 22” x 50” x 7” carrying cradle» Many tie-down points to insure secure transport» Attaches to any 2” hitch receiver» “Z-Bar” attachment allows clearance over uneven terrain
» Weight: 25 lbs» Aircraft aluminum» 400 lb load capacity» Outside cradle dimensions: 22” x 50” x 6”» Inside cradle dimensions: 20” x 48” x 6”» Z-Bar gives a 7” rise
» Can be removed and serve as portable storage» Aircraft aluminum construction» 400 lbs. of carrying capacity» Water-proof, dust-proof polyethylene storage case
DESCRIPTION PART NO.Hitch & Ride Utility Rack for 2” Receiver (with Z bar) GD-HNR1000UTV
Hitch & Ride Magnum Cargo Carrier for 2” Receiver (with Z bar) GD-HNR2000UTV
Hitch & Ride DRY HAUL Cargo Carrier for 2” Receiver (with Z bar) GD-HNR3000UTV
Hitch & Ride Magnum Cargo Carrier Hitch & Ride Dry Haul Cargo Carrier
Hitch & Ride Utility RackPerfect for transporting anything from hunting equipment, work materials, coolers, to firewood or wild game! It’s perfect for working around the ranch, home, camp, or industrial site.
RACKS
For a UTV owner, there is nothing handier, more convenient or appreciated, than a place to quickly store and transport gear and tools. » Constructed of aircraft aluminum» Weighs only 22 lbs.» Rated for loads up to 100 lbs.» Assembled in just minutes using
regular hand tools!
Front Utility Rack
DESCRIPTION PART NO.Front Utility Rack GD-UVFR751
Roof RackDESCRIPTION PART NO.Roof Rack GD-UVRR750
» Weighs only 14 lbs.» 22” x 50” x 7” cradle with multiple tie
down points» Rated for loads up to 100 lbs.
22
MULTI-FIT ACCESSORIES
RAMPSThese Premium arched steel ramps are the perfect solution for loading UTV’s and lawn tractors onto pickup trucks! The arched design ensures that your mower deck will not hang-up on the tailgate and are perfect for loading low ground clearance vehicles. Ramps fold to 63-1/2” long for convenient storage.
These ramps feature solid body construction with a punched tread pattern for superior traction over rung-style ramps. Patented overlapping hinges provide added structural support, allowing for a high load capacity of 1,200 lbs., 1,500 lbs., or 2,000 lbs. of distributed weight per set.
DESCRIPTION PART NO. DIMENSIONS LOAD CAPACITY FOLDING/OPEN POSITION LENGTH CONSTRUCTION MATERIAL WEIGHT
800-lb Steel Loading Ramp OS-1084D 12.25 in. W x 88 in. D x 6.25 in. H; 84” x 10.5” x 2” (each)
800 lb. (400 lbs./ramp) 84 in. open; 63.5 in. fold 16 gauge steel 71 lbs
1200-lb Steel Loading Ramp OS-1084C 12.25 in. W x 88 in. D x 6.25 in. H; 84” x 10.5” x 2” (each)
1,200 lb. (600 lbs./ramp) 88 in. open; 63.5 in. fold 14 gauge steel with black powder coat finish
71 lbs
1500-lb Aluminum Loading Ramp OS-1084A 14.25 in. W x 88 in. D x 7 in. H; 84” x 10.5” x 2” (each)
1,500 lb. (750 lbs./ramp) n/a 12 gauge aluminum 49 lbs
2000-lb Steel Loading Ramp OS-1084 14.25 in. W x 88 in. D x 7 in. H 2,000 lb. (1000 lbs./ramp) 88 in. open; 63.5 in. fold 14 gauge steel with black powder coat finish
83 lbs
Premium Arched Steel Ramps
800-lb Steel Loading Ramp
1200-lb Steel Loading Ramp
1500-lb Aluminum Loading Ramp
2000-lb Steel Loading Ramp
Premium Arched Aluminum Ramp
» Solid construction perfect for small wheeled items» 2 cam buckle straps included for securing ramps to truck» Patented overlapping hinge and heavy-duty steel for heavy loads» Arch design for loading items with low ground clearance
SEATS
DESCRIPTION PART NO.XUV, HPX, TX, & TH High Back Seat Cover (Black) GM-JDGHBS11
XUV, HPX, TX, & TH High Back Seat Cover (Mossy Oak Camo) GM-JDGHBS155
4x2 Low Back Seat Cover (Black) GM-JDGLBS11
4x2 Low Back Seat Cover (Mossy Oak Camo) GM-JDGLBS155
» Offers great protection to factory seat bottom and backrest» Easy installation and no tools needed» Comes with all necessary mounting items and instructions» Made from 600 denier PVC backed Polyester» Under-seat straps used for a factory fit
available in 2 colors!
Polyester Seat Covers
23
MULTI-FIT ACCESSORIES
Side/Rear View Mirror Auto Style Rear View Mirror» Mounts anywhere; side or rear view» Convex surface provides large viewing area» Ball socket joint gives wide range» 4.5” x 8” viewing surface» Shatterproof tempered glass for safety
» Strong and durable cast alloy arm» High impact ABS plastic housing» Shatterproof tempered glass» High visibility» Increased maneuverability
DESCRIPTION PART NO.
Side/Rear View UTV Mirror - 1.75” clamp
SM-18029
MIRRORS
DESCRIPTION PART NO.
Auto Style Rear View UTV Mirror - 1.75” clamp
SM-18030
VEHICLE TYPE PART NO.Standard Rumble Seat (Black) GD-UVRS100BL
Deluxe Rumble Seat (Black) GD-UVRS200BL
Rumble Seat - UTV Passenger SeatThe Rumble Seat is framed in lightweight aircraft aluminum and adds only 24 lbs. to the vehicle. These feature super soft, cushioned pads covered with 600 Denier PVC coated polyester. The Rumble seat also features safety belts and quick-detach brackets to allow instant installation in all popular Gator models!
Side View Mirrors (pair) with 1.75” Steel Clamp» Strong & durable steel clamp» Super tough housing resists damage» Shatterproof tempered glass» Increased maneuverability» Sold as a pair
DESCRIPTION PART NO.
Side View Mirrors with 1.75” Steel Clamp
SM-18041
Kolpin Side View Mirrors
DESCRIPTION PART NO.
Kolpin Side View Mirror - Left Side KP-98200LH
Kolpin Side View Mirror - Right Side KP-98200RH
SELLERBEST
24
MULTI-FIT ACCESSORIES
TIRES
» Height: 26”» Width: 10”, 12”» Ply: 6» Fits rim size: 14”
Trailfinder VPR P350 Journey Tread» Height: 25”, 26”, 27”» Width: 8”, 9”, 10”, 12”» Ply: 6» Fits rim size: 12”, 14”
P341 All Terrain Tread» Height: 25”» Width: 8”, 10”» Ply: 6» Fits rim size: 12”
W393 Hard Surface - Turf Tread» Height: 25”» Width: 8”, 10”» Ply: 6» Fits rim size: 12”
P375 Tractor Lug - Heavy Mud Tire» Height: 25”, 26”, 27”» Width: 8”, 9”, 10”, 12”» Ply: 6» Fits rim size: 12”
W354 Hard Surface - Turf Tread» Height: 25”» Width: 8”, 10”» Ply: 6» Fits rim size: 12”
NEW Lug Configurations
HPX 5 x 4.5
XUV 620i/850d 5 x 4.5
XUV 625i/825i/855d 5 x 4.5
XUV 500 4 x 137
XUV 550 S4 4 x 137
W396 Duo-Trax Tread» Height: 26”» Width: 9”, 11”» Ply: 6» Fits rim size: 12”» First asymmetrical tread design!
First Asymmetrical Tread Design!
25
MULTI-FIT ACCESSORIES
WHEELS
Outback 159 - Machined Outback 159 - Black» Width: 7”, 8”» Height: 14”
Outback 159 - Camo» Width: 7”, 8”» Height: 14”
» Width: 7”, 8”» Height: 12”, 14”
Bruiser 161 - Black» Width: 7”, 8”» Height: 12”, 14”» Not available for 620i, 625i, 850d, 855d
Bruiser 161 - Machined Warrior 375» Width: 7”, 8”» Diameter: 14”» Not available for 620i, 625i, 850d, 855d
» Width: 7”, 8”» Height: 12”, 14”» Not available for 620i, 625i, 850d, 855d
Buckshot 158 - Machined» Width: 7”, 8”» Height: 12”, 14”
» Width: 7”, 8”» Height: 12”, 14”
» Width: 7”, 8”» Height: 12”, 14”
Lockout 393 - Black Lockout 393 - Chrome/Black
26
MULTI-FIT ACCESSORIES
PRODUCT FEATURES:
WINCHES FOR UTV’s
PE45004,500 LB Capacity(2041 KG)PN: MM-7650115B
TOUGHSERIES
» Fast Line Speeds» Redesigned Braking Mechanism» All Metal Planetary Gearing» Includes both Handheld and
Handlebar Controls (PE4500 hand control only)» 300 Amp Rated Solenoid» Center Focused Drum» Free Spooling» Roller Fairlead
The new Tough Series lineup UTV winches have been totally redesigned and now boast top-of-the-line recovery speeds and a new braking system. These winches include both a handheld remote control, as well as a ATV handlebar mounted remote control with “power in” and “power out” func-tions. The Tough Series winches also include a new 300 amp rated solenoid, giving maximum duty cycle to these bantam size power houses.
DESCRIPTION PART NO.
2,000 lb. Tough Series UTV Winch MM-7650100
2,500 lb. Tough Series UTV Winch MM-7750105B
2,500 lb. Tough Series UTV Winch w/ Synthetic Rope MM-7753105B
3,500 lb. Tough Series UTV Winch MM-7750112B
3,500 lb. Tough Series UTV Winch w/ Synthetic Rope MM-7753112B
4,500 lb. Tough Series UTV Winch MM-7650115B
Winch Mount for XUV (2007-2010) & HPX (2004-2006) MM-511831
Winch Mount for 2011 XUV 625i, 825i, 855d, 4x4 MM-511832
PE2.5PE3.53,500 LB Capacity(1588 kg)PN: MM-7750112B
2,500 LB Capacity(1134 kg)PN: MM-7750105B
WINCH&RECOVERY
This kit includes everything that you need to push your UTV to the limits: Two powder-coated shackles, two 1” x 8’ recovery straps, a snatch block, and a pair of recovery gloves are all conveniently packaged in a durable carrying case that can be strapped and mountedvirtually anywhere on your rig.
Winch Accessory Kit
DESCRIPTION PART NO.
Winch Accessory Kit MM-1900105
Quick Disconnect Wiring Kit
DESCRIPTION PART NO.
Rear Quick Disconnect Wiring Kit
MM-9353105
Front Quick Disconnect Wiring Kit
MM-9353106
Move your winch from front to back or to another vehicle. The cradle mount fits a 2” receiver hitch. Compatible with Tough Series PE2.5, PE3.5, & PE4500 winches.
2” Receiver Cradle Mount
DESCRIPTION PART NO.
2” Receiver Cradle Mount MM-5106496
Move your winch from front to back or to another vehicle. The cradle mount fits a 2” receiver hitch. Compatible with 2500, 3000, 3500 lb winches.
2” Receiver Winch Mount
DESCRIPTION PART NO.
2” Receiver Winch Mount MM-5106595
Rear
Front
Disconnecting the wiring from your winch to your UTV is a snap with our Quick Disconnect Wiring Kit. Available for the front and the rear.
27
MULTI-FIT ACCESSORIES
The “Original Power Tool” of the off-road market is now available to meet the needs of the UTV market with this specialized UTV jack model. Sized perfectly for UTV operators.... off-roaders, farmers, ranchers, search and rescue personnel, and general outdoorsmen.
» Lightweight, weighing less than 30 lbs.» Special attachment: standard top clamp-clevis
replaced with winch/clamp/spreader tool» Available in 36” and 42” models
Hi-Lift UTV Jack
DESCRIPTION PART NO.36” Hi-Lift UTV Jack HL-UTV364
42” Hi-Lift UTV Jack HL-UTV424
WINCH&RECOVERY
Use this tube mount to mount your Hi-Lift™ jack to your UTV! Manufactured of 6061-T6 structural aluminum and rust resistant hardware. No drilling required.
Tube Mount for Hi-Lift™ Jack
DESCRIPTION PART NO.Adjustable Tube Mount 1” - 2” HL-TM700
Adjustable Tube Mount 2” - 3” HL-TM750
This neoprene jack cover offers a level of mud and dirt protection for the main lifting mechanism (running gear) of the jack while stored. It is very important to keep the lifting mechanism clean, free from dirt and mud, and well lubricated. The neoprene zip-on cover greatly reduces the amount of dirt and mud that can accumulate in the working mechanism of the jack while mounted on the exterior of vehicles.
Neoprene Jack Cover for Hi-Lift™ Jack
DESCRIPTION PART NO.Neoprene Jack Cover for Hi-Lift® Jack HL-NJC
This wide platform base eliminates jack sinkage on sand or soft ground. Rugged construction meets specifications for strength and durability.
Off Road Base for Hi-Lift™ Jack
DESCRIPTION PART NO.Off Road Base HL-ORB
29
XUV & HPX GATORS
CABS&ENCLOSURESComplete Cab Enclosure with Lexan Windshield» Constructed of professional grade marine textile» Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant» Lexan Polycarbonate is 3/16” thick and is shatter resistant, nearly bulletproof» Windshield is attached using completely stainless steel hardware that will not rust» Soft doors and rear window are constructed out of durable Aquaview Vinyl» Design allows for easy access to the storage compartment under the hood» Full length double pull YKK zippers» Self-adhesive Velcro & strong rare-earth magnets combine to provide you with a custom fit» Installation & care instructions included
DESCRIPTION PART NO.Cab Enclosure with Lexan Windshield
for 620i, 625i, 825i, 850d, 855d and HPX
MS-JDXUVFC03
Cab Enclosure with Lexan Windshield for 550 MS-JD550FC03
Cab Enclosure with Lexan Windshield for 550 S4 MS-JD550S4FC03
NEW 2012 XUV 550 Enclosures (Available for 2 and 4 Passenger Models)
30
XUV & HPX GATORS
Windbreak Cab with Hinged Doors
VEHICLE TYPE PART NO.Windbreak Cab with Hinged Doors OT-60309
» No holes to drill» Hinged doors for quick entry/exit» Installation is made quick and simple with illustrated instructions» 16 gauge steel tube frames covered with stop rip vinyl fabric» Front and rear window made of shatter resistant lexan
Complete Cab Enclosure with Vinyl Windshield» Constructed of professional grade marine textile» Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion
resistant» Windows are constructed out of durable Aquaview vinyl or 3/16” Lexan
Polycarbonate» Self-adhesive Velcro & strong rare-earth magnets combines to provide you
with a custom fit» Full Length double pull YKK zippers, complete with self adhesive Velcro for a
hassle free installation!» Doors roll back for complete ventilation and entry/exit!
DESCRIPTION PART NO.Complete Cab Enclosure with Vinyl Windshield for 620i, 625i, 825i, 850i, 855d and HPX
MS-JDXUVFC01
Cab Enclosure with Vinyl Windshield for 550 & 550 S4 **Call for Details**
31
XUV & HPX GATORS
Side Door & Rear Window Kit
DESCRIPTION PART NO.Side Door & Rear Window Kit for John Deere Gator 550 S4 MS-JD550S4DRW01
Side Door & Rear Window Kit for John Deere Gator 550 MS-JD550DRW01
Side Door & Rear Window Kit for John Deere Gator XUV & HPX MS-JDXUVDRW01
Soft Doors Only MS-JDXUVSDK01
» Works with John Deere Poly Top & Factory Windshield» Constructed of professional grade marine textile» Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant» Soft doors and rear window are constructed out of durable Aquaview vinyl» Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a
custom fit
POPULARMOST
Designed to work with factory canopy and windshieldNEW 2012 XUV 550 Enclosures (Available for 2 and 4 Passenger Models)
32
XUV & HPX GATORS
Full Cab with Lexan Windshield for Deluxe Cab
DESCRIPTION PART NO.Full Cab with Lexan Windshield for HPX/XUV Gators with Deluxe Cab GC-JDGDXLFCL
Side Doors & Rear Window Only GC-JDGDXLDRW
Lexan Windshield Only GC-JDGDLXCBWS
» Constructed of professional grade marine textile» Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant» Windows are constructed out of durable Aquaview vinyl» Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a
custom fit» Full Length double pull YKK zippers, complete with self adhesive Velcro for a hassle
free installation!» Doors roll back for complete ventilation and entry/exit!
“Summer Cab” Mini Cab Enclosure with Vinyl Windshield» Constructed of professional grade marine textile» Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion
resistant» Windows are constructed out of durable Aquaview vinyl» Self-adhesive Velcro & strong rare-earth magnets combines to provide you
with a custom fit» Full Length double pull YKK zippers, complete with self adhesive Velcro for
a hassle free installation!» Doors roll back for complete ventilation and entry/exit!
VEHICLE TYPE PART NO.“Summer Cab” Mini Cab Enclosure with Vinyl Windshield for 620i, 625i, 825i, 850d, 855d
MS-JDXUVMC0101
“Summer Cab” Mini Cab Enclosure with Vinyl Windshield for 550 and 550 S4
**Call for Details**
33
XUV & HPX GATORS
Heavy Duty Fabric Sunshade KitFits: XUV 620i, 625i, 825i, 850d, 855d, HPX
VEHICLE TYPE PART NO.
620i, 625i, 825i, 850d, 855d, HPX MS-JDXUVTC01
550 MS-JD550TC01
550 S4 MS-JD550S4TC01
» Constructed of professional grade marine textile polyester» Waterproof, puncture resistant, tear resistant, and abrasion resistant» Complete with self-adhesive velcro
Polished Tread-Brite Aluminum
Tread-Brite Aluminum with Line-X Coating
Smooth Plate Aluminum with Line-X Coating
CANOPIESDiamond Plate CanopyFits: XUV 620i, 625i, 825i, 850d, 855d, HPX
VEHICLE TYPE PART NO.Polished Tread-Brite Aluminum: 620i, 625i, 825i, 850d, 855d, HPX DB-JG508R
Polished Tread-Brite Aluminum: XUV 550 DB-JG512R
Polished Tread-Brite Aluminum: XUV 550 S4 DB-JG512RC
Tread-Brite Aluminum with Line-X Coating: 620i, 625i, 825i, 850d, 855d, HPX DB-JG508RX
Tread-Brite Aluminum with Line-X Coating: XUV 550 DB-JG512RX
Tread-Brite Aluminum with Line-X Coating: XUV 550 S4 DB-JG512RCX
Smooth Plate Aluminum with Line-X Coating: 620i, 625i, 825i, 850d, 855d, HPX DB-JG508RSX
Smooth Plate Aluminum with Line-X Coating: XUV 550 DB-JG512RSX
Smooth Plate Aluminum with Line-X Coating: XUV 550 S4 DB-JG512RCSX
» Durable metal UTV roof that won’t crack like plastic» Includes a rain gutter on the roof that adds significant weather protection by helping
to keep rain off your lap while riding» Ability to use it as a platform! Stand on it to get a better view, to hunt, or simply reach
those hard-to-reach work areas.» Stainless steel hardware» Doesn’t shake or rattle.» Not FOPS approved
Fabric Sunshade Kit with Rear Mesh PanelFits: XUV 620i, 625i, 825i, 850d, 855d, HPX
DESCRIPTION PART NO.
Fabric Sunshade Kit with Rear Mesh Panel - Yellow OT-30366Y
Fabric Sunshade Kit with Rear Mesh Panel - Black OT-30366B
» Constructed of 13 oz., stop-rip heavy duty vinyl» Instantly removable without tools for mowing under low objects» Vinyl cover slips off without disassembly for truck or trailer transport» Installation is made quick and simple with illustrated instructions» Will NOT fit Deluxe cab frame!
34
XUV & HPX GATORS
ENGINE&PERFORMANCEStandard Diesel Turbo KitFits: XUV 850D, XUV 855D, HPX (select models)
DESCRIPTION PART NO.
Diesel Turbo Kit - HPX (after serial number 40,000)
SF-JH71010
Diesel Turbo Kit - XUV 850D SF-JX71010
Diesel Turbo Kit - XUV 855D SF-JX71015
This turbo kit has everything you need to give your UTV the boost it can handle! Make full use of your UTV’s durable hydrostatic transmission by installing this proven turbo kit. Simple bolt on installation takes only a couple of hours and increases low-end horsepower by as much as 50%.
Whether your needs are for altitude compensation or just more power, this kit will make your UTV a workhorse without adverse affects on the power train.
“Max Shade” Fiberglass Canopy KitFits: XUV 620i, 625i, 825i, 850d, 855d, HPX
» Fiberglass construction with high gloss gel-coat finish» Factory matching green color» Front edge rain lip that directs water to the edges
DESCRIPTION PART NO.“Max Shade” Fiberglass Canopy Kit - Green FF-DC06HPXG
“Max Shade” Fiberglass Canopy Kit - Trail Olive FF-DC06HPXT
“Max Shade” Fiberglass Canopy Kit - Black FF-DC06HPXB
“Factory Style” Fiberglass Canopy KitFits: XUV 620i, 625i, 825i, 850d, 855d, HPX
» Fits HPX & XUV Gators with factory OPS rollbar» Compatible with John Deere factory windshield and light kit» Fiberglass construction with high gloss gel-coat finish» Factory matching green color» Front edge rain lip that directs water to the edges
DESCRIPTION PART NO.“Factory Style ” Fiberglass Canopy Kit - Green FF-DCXG
“Factory Style” Fiberglass Canopy Kit - Trail Olive FF-DCXT
“Factory Style” Fiberglass Canopy Kit - Black FF-DCXB
available in 3 colors!
available in 3 colors!
35
XUV & HPX GATORS
WINDSHIELDSAero-Vented Lexan WindshieldFits: XUV 625i, 825i, 855d, 550, 550 S4, HPX
» Sliding ventilation system allows users to adjust the amount of airflow for maximum comfort
» 1/4” think lexan polycarbonate is nearly bulletproof!» Fitted using stainless steel hardware that will not rust» Easy to install» Comes complete with installation and care instructions
VEHICLE TYPE PART NO.XUV 625i, 825i, 855d, & HPX Full Vent MS-JDXUVWD05
XUV 550 & 550 S4 Full Vent MS-JD550WD05
Adjustable Ventfor Controlled Airflow
Will Not Work With Deluxe Cab
36
XUV & HPX GATORS
Full Length 1/4” Lexan WindshieldFits: XUV 550 and 550 S4
DESCRIPTION PART NO.Full Length 1/4” Polycarbonate Lexan Windshield CM-JDLW1550
» 1/4” Lexan to provide maximum durability» Designed for easy installation and miles of care free use» All clamps and screws are made with no-rust, stainless steel hardware» Made in the U.S.A.
Full Length 1/4” Lexan Vented WindshieldFits: XUV 550 and 550 S4
DESCRIPTION PART NO.Full Length 1/4” Polycarbonate Lexan Windshield CM-JDLW1550
» 1/4” Lexan to provide maximum durability» Designed for easy installation and miles of care free use» All clamps and screws are made with no-rust, stainless steel hardware» Made in the U.S.A.
Driver and Passenger Vents Operate Independently!
37
XUV & HPX GATORS
Rear Lexan WindshieldFits: XUV 625i, 825i, 855d, HPX
» Provides an effective barrier to keep debris from entering the cab» 1/8” FMR GE Lexan rear shield» Extremely durable injection molded clamps» All stainless steel, black coat finish hardware» Easy installation
Half Tilt Folding WindshieldFits: XUV 625i, 825i, 855d, HPX
This unique half-fixed design windshield protects you from debris and mud while providing maximum ventilation. Constructed of clear polycarbonate to prevent scratching or shattering.
Fits models 2009 and newer
DESCRIPTION PART NO.Half Tilt Folding Windshield KP-2901
DESCRIPTION PART NO.Rear Windshield Back Panel Combo KP-2902
Full Length Tilting Lexan Windshield
DESCRIPTION PART NO.Full Tilt Lexan Poly Windshield KP-2900
» Versatile 3-position tilt mechanism permits airflow into the driver compartment» 1/4” abrasive-resistant GE Lexan MR10» Extremely durable injection molded clamps» All stainless steel, black coated finish hardware» Easy installation
Tilting Feature Allows Easy Access Under Hood
39
T-SERIES GATORS
DESCRIPTION PART NO.
Fiberglass Canopy Kit with Steel Frame (TS, TX, TH, TE) FF-DCGT
Fiberglass Canopy Kit with Steel Frame (for Original 4x2 and 6x4) FF-DC2PT
Deluxe Fiberglass Canopy Kit» Sturdy frame mount design» Heavy-duty, powder-coated steel mounts» Durable, fiberglass construction» Hi-gloss, gel-coat finish with UV inhibitors» Available in matching factory green» Compatible with FF-DCGTW Acrylic Windshield Kit
SELLERBEST
Side Door & Rear Window KitRequires Canopy (FF-DCGT) and Windshield (FF-DCGTW)
DESCRIPTION PART NO.
Side Door & Rear Window Kit for T-Series Gators GR-JDGENCBK100
» Professional grade marine textile that is tear resistant and abrasion resistant.» Roll away doors provide the option of taking your doors with you and conveniently stow-away when not in use.» Professional grade marine textile polyester, self-adhesive velcro provides you with a
custom fit.
DESCRIPTION PART NO.Acrylic Windshield for John Deere TS, TX, TH, & TE Gator (Requires FF-DCGT Canopy Kit)
FF-DCGTW
Acrylic Windshield for John Deere Non-Current 4x2 & 6x4 Gator(Requires FF-DC2PT Canopy Kit)
FF-DCFWD
Acrylic WindshieldRequires Canopy (see below)
» Full length, golf car style windshield» 1/4 inch tinted acrylic» Include contoured fiberglass shroud to seal bottom of windshield to hood cowl» Requires FF-DCGT or FF-DC2PT
40
T-SERIES GATORS
CANOPY & CAB COMPONENTS
DESCRIPTION PART NO.TS, TX, & TE Gators (2005 & newer) CM-TSTX05
TH Gators (2009 & older) CM-TH05
TH Gators (2010-2012) CM-TH10
4x2 Turf Gators (2004 & older) CM-G4X2
6x4 Gators (2004 & older) CM-6X404
STEEL CAB FRAMEA.NOTe: Not a Roll-Over protection System
DESCRIPTION PART NO.T-Series Gators (2005 & newer) CM-LW2
T-Series Gators (2004 & older) CM-LW1
VENTED 1/4” LEXAN WINDSHIELDB.
» Sliding ventilation system allows users to adjust the amount of airflow for maximum comfort
» 1/4” think lexan polycarbonate is nearly bulletproof!» Fitted using stainless steel hardware that will not rust» Easy to install» Comes complete with installation and care instructions
DESCRIPTION PART NO.ABS Plastic Roof for T-Series Gators (requires steel frame) CM-ABS1
ABS PLASTIC ROOFRequires: Steel Cab Frame
C.
» Made of durable, thermoformed ABS Plastic» Easily attaches to the cab frame (not included) using included
stainless steel hardware» Installation instructions included
Our most versatile canopy, windshield and enclosure kits for the John Deere traditional series utility vehicles. Starting with the cab frame, add the components that best fit your environment.
41
T-SERIES GATORS
Soft Door & Rear Panel EnclosureRequires: Cab Frame, Windshield, and ABS roof» Professional grade marine textile that is waterproof, puncture resistant, tear resistant, and abrasion resistant» Roll away doors provide the option of taking your doors with you and conveniently stow-away when not in use.» Professional grade marine textile polyester, self-adhesive velcro provides you with a custom fit unlike anything on the market.
VEHICLE TYPE PART NO.Current TS-TX-Turf MS-TT4DRD
Current TH MS-TTH4
Non-Current 4x2 & Turf MS-TT4DRD
Non-Current 6x4 MS-TTH4
Side Door, Rear Window, Roof EnclosureRequires: Cab Frame and Windshield» Handcrafted & measured to ensure a precise fit on your Gator’s steel frame (not included)» Incorporates a canopy, doors, and rear window!» Professional Grade Marine Textile that is waterproof, tear resistant, and abrasion resistant» Full length double pull YKK zippers» Complete with self-adhesive Velcro, installation & care instructions
VEHICLE TYPE PART NO.TS, TX, & Turf Gators CM-T4LEXAN
TH Gators CM-TH2
Non-Current 4x2 CM-T4LEXAN
Non-Current 6x4 CM-TH2
42
T-SERIES GATORS
Soft Top Canopy with Rear Mesh Panel
DESCRIPTION PART NO.
Soft Top Canopy for John Deere TX, TE, & TH with Poly Bed OT-30447Y
Soft Top Canopy for John Deere 4x2, 6x4, TS, TX, TE, & TH with Steel Bed OT-9565Y
» Durable 16 gauge tubular steel» Extremely tough, yet lightweight ripstop vinyl» Black mesh rear screen
DESCRIPTION PART NO.
“See Ya Later Alligator” Fiberglass Canopy FF-DCUL8R
“See Ya Later Alligator” Fiberglass CanopyIf you want to draw attention to your business & promote selling “Gators”, this is the way to do it. Hand-built to order, with excellent attention to detail. Great for state fairs, parades, on & off site promotions.
43
T-SERIES GATORS
DESCRIPTION PART NO.Cargo Cover Enclosure for John Deere Gator 4x2 with Steel Bed OT-60097
Cargo Cover Enclosure for John Deere Gator 6x4 with Steel Bed OT-60090
Polypropylene Storage Cover» Durable 100% Polypropylene» Easy on - easy off» Convenient drawstring» Ideal for indoor and outdoor storage» Repels water and resists damaging UV rays» Won’t stretch or shrink» Extremely breathable (allows air to circulate and keeps moisture out)» Mold and mildew resistant
DESCRIPTION PART NO.Polypropylene UTV Storage Cover OT-9985
» Made of durable stop-rip vinyl fabric» Fits 44” L x 49” W bed size» 27” from bed floor to top of cover» DOES NOT WORK WITH POLY BED
Cargo Bed Cover Enclosure
DESCRIPTION PART NO.Hardtop Cab Enclosure with Glass Windshield & Manual Wiper OT-40166
Hardtop Cab Enclosure with Glass Windshield & Manual WiperFits: 2003 & Older 4x2 & 6x4
» No holes to drill» Hinged doors for quick entry/exit» Installation is made quick and simple with illustrated instructions» 16 gauge steel tube frames covered with stop rip vinyl fabric
45
PROGATOR
Full Cab Enclosure with Vinyl WindshieldRequires FF-DCPRO canopy kit
» Constructed of professional grade marine textile» Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant» Soft doors and rear window are construct out of durable Aquaview Vinyl» Doors roll away to provide for easy storage when not in use» Design allows for easy access to the storage compartment under the hood» Full length double pull YKK zippers» Self-adhesive Velcro & strong rare-earth magnets combine to provide you with a custom fit» Installation & care instructions included
VEHICLE TYPE PART NO.Full Cab Enclosure with Vinyl Windshield - Black GR-JDGPROTENCBK
Full Cab Enclosure with Vinyl Windshield - Yellow GR-JDGPROTENCYL
Fiberglass Canopy Kit for ProGator
DESCRIPTION PART NO.
Fiberglass Canopy Kit for ProGator FF-DCPRO
» Heavy-duty, powder coated steel mounting system» Rubber isolator pads eliminate vibration noise» Fiberglass construction with high gloss gel-coat finish
Acrylic Windshield KitRequires FF-DCPRO canopy kit
» Heavy duty steel frame construction» 3/16” Acrylic windshield with slight tint to reduce glare
VEHICLE TYPE PART NO.Acrylic Windshield Kit FF-DCPROW
Actual tint is lighter than shown See FF-DCGTW on page 39 for reference
47
TRACTORS
Roof Mount Audio ConsoleFits: Tractors with a Canopy
Roll Bar Mount Audio ConsoleFits: Tractors with ROPS system
» Marine waterproof retractable cover protects the DEH Pioneer CD Player» MP3/WMA/MAV playback with volumen and memory settings» Connect your portable devices directly through the front AUX input» Optional high intensity domelight option» Includes a high quality AM/FM antenna. » WR85B marine speakers are water, UV, and corrosion resistant and have a one piece
molded grill for speaker protection and durability.
DESCRIPTION PART NO.Roof Mount Audio Console - Standard (Black) TT-RMT
Roof Mount Audio Console - Standard (Camo) TT-RMTC
Roof Mount Audio Console - Standard (Carbon Finish) TT-RMTCF
Roof Mount Audio Console - Dome Light (Black) TT-RMTD
Roof Mount Audio Console - Dome Light (Camo) TT-RMTDC
Roof Mount Audio Console - Dome Light (Carbon Finish) TT-RMTDCF
» Fits roll bars and R.O.P.S. size widths from 2 to 3 inches (round or square).
» Includes a high quality AM/FM antenna.» WR85B Marine speakers are water, UV, and corrosion resistant and
have a one piece molded grill for speaker protection and durability.» The DEH Pioneer is a 50 watts x (4) 200 total watts MOSFET CD player
with AM/FM tuner and 3 band equalizer.» MP3/WMA/WAV playback with volume and memory settings.» Connect your portable devices directly through the front AUX input.» Card Remote Control.» Detachable Face Security.» Overall dimensions: 24 L x 7.5 W x 8.75 H (in)
DESCRIPTION PART NO.Roll Bar Mount Audio Console - Standard TT-MAC2900
Roll Bar Mount Audio Console - with PTO Working Lights
TT-MACPTO
Roll Bar Mount Audio Console - with Rear Work-ing Lights
TT-MACCRW
Roll Bar Mount Audio Console - with PTO Work-light Kit and Rear Worklight Kit
TT-MACRWPTO
AUDIO
CANOPIESTread-Brite Heavy-Duty Diamond Plate Canopy 1900 Series» Adjustable frame with rails that slide in and out to adjust to different models» U2x3 brackets adjust to the different degree of angle» Overall size is 45” x 57”» Not FOPS approved2000 Series» Overall size is 57” x 66”» Not FOPS approved
DESCRIPTION PART NO.1900 Series TX-AU19002X3
2000 Series TX-AU20002X3
48
TRACTORS
Fiberglass Canopy Kit - “N” Series
» Hi-gloss gel-coat finish with UV inhibitors» Multi-directional ribs provide structural strength» Simple, adjustable mounting system» Includes heavy-duty powder coated mounting brackets» Brackets allow fore-aft, vertical and pitch adjustments» Item No: See below
TS N1 G 32Canopy No.
NX: 45” W x 47” LN1: 45” W x 58” LN2: 52” W x 66” L
ColorG: JD Green
Bracket & Hardware Kit22: 1 series, 2000 series, 997 mower32: 3000-5000, 70, 90 series67: 6000/7000 series
Top-off your tractor, with our best selling fiberglass sunshade. Available in 3 sizes to fit mowers, compact, utility & ag tractors, with a variety of mounting brackets. Durable construction for long lasting coverage...plus it looks great on your tractor!
Fiberglass Canopy Kit - “D” Series
» Includes adjustable, heavy-duty, powder coated steel mounting brackets» Hi-gloss gel-coat finish available in factory matching colors with UV inhibitors» One inch “drip rail” around edge of sunshade that diverts morning dew and rain to the rear corners» Wood reinforced “stringers” run the length of the sunshade for added structural strength» Rubber isolation pads eliminate vibration» Available in 3 sizes » ”D3” Canopy - 44” W x 55” L x 8” D » “D4” Canopy - 49” W x 57” L x 9” D » “D6” Canopy - 54” W x 63” L x 11” D
The D-Series sunshades are our top of the line canopies for tractors. The innovative “hump”, allows you to lower the sunshade closer to you by pushing the rollbar up inside the “hump”.
each item number can be broken down into three components:
DESCRIPTION PART NO.Fits 1 Series, 2000 Series and mowers with 2” x 2” ROPS FF-D3A22
Fits 3000 Series and mowers with 3” x 2” ROPS FF-D3A32
Fits 3000-5000 Series FF-D4
Fits 6000-7000 Series FF-D6
Fiberglass Canopy Kit - Traditional “TracTop” Style
» Durable fiberglass construction» Includes adjustable, heavy-duty, powder coated steel mounting brackets» Hi-gloss gel-coat finish available in factory matching colors with UV inhibitors» One inch “drip rail” around edge of sunshade that diverts morning dew and rain to the
rear corners» Wood reinforced “stringers” run the length of the sunshade for added structural
strength» Rubber isolation pads eliminate vibration» Available in 4 sizes » ”S” Canopy - 47” W x 54” L » “L” Canopy - 47” W x 63” L: Fits narrow-vineyard tractors with mid-mount ROPS » “M” Canopy - 54” W x 63” L » “W” ‘Wedge” Canopy - Specifically for older 10, 20, 30 series tractors.
The brand “TracTop” has been a leader in manufacturing canopies since 1983. This traditional design is still available and compliments older style tractors.
DESCRIPTION PART NO.Fiberglass Canopy Kit -Traditional Style “TracTop” Call for Part #
SELLERBEST
49
TRACTORS
Guardian Tractor Canopy with Universal Mounting Kit» Factory matching green powder coat finish» 1/4” overhead asphault sheeting insulation» 3/16” steel universal mounting system» Heavy duty 18 gauge steel construction» Available in 2 sizes to fit all tractors & mowers» NOTE: this canopy is NOT FOPS approved
DESCRIPTION PART NO.Guardian Tractor Canopy (45” x 48” Green Steel) PC-610348G
Guardian Tractor Canopy (45” x 58” Green Steel) PC-610356G
Guardian Tractor Canopy (45” x 48 Tread Bright Aluminum) PC-618048G
Guardian Tractor Canopy (45” x 58” Tread Bright Aluminum) PC-618056G
“RagTop” Fabric Sunshade Kit
» Heavy duty marine grade fabric» 7/8” bright anodized aluminum frame» Fits rollbars 24” - 38” wide» Allows for adjustments: 20 degree rear and 10 degree
forward pitch» Dimensions: 38” W x 48” L
DESCRIPTION PART NO.“RagTop” Fabric Sunshade Kit FF-RTFF100
Easy-on, easy-off fabric canopy without spending a lot of money. Perfect for seasonal use on tractors and mowers.
DESCRIPTION PART NO.Soft Top Sunshade Kit (Yellow) OT-30400Y
Soft Top Sunshade Kit
» Mounts to 2x2 or 2x3 ROPS systems with a max. width of 34”
» Heavy duty, 13 oz stop-rip vinyl top» On/Off in seconds after initial installation» Rough measurements - 35” W x 46” L
Stay cool while you work and protect yourself from harmful UV rays. Affordable soft top, vinyl sunshade that is perfect for seasonal use.
ABS Plastic Hardtop Canopy» Fits most machines with a vertical 2x2 or 2x3 ROPS
bar system» 3/16 ABS plastic top (available in green, black or
white)» Powder coated steel frame» Measures---40 5/8” L x 35 1/4” W x 4 1/8” D» Easy on & off after initial installation» Additional support brackets available for commercial
use
DESCRIPTION PART NO.Hardtop ABS Plastic Canopy (Black) OT-30382B
Hardtop ABS Plastic Canopy (White) OT-30382W
Hardtop ABS Plastic Canopy (Green) OT-30382G
50
TRACTORS
These vinyl tractor cabs are an excellent alternative to expensive hard cabs. Simply install over the top of a pre-existing canopy. The cleanable, durable materials will give you many years of protection from the elements.
» 138 bonded thread creates very strong seams» Optically clear vinyl (scratch resistant coating)» Water proof durable fabric» Sliding side doors easily open for side to side
ventilation» Front and rear windows include zippers to create
front to back ventilation» No drilling holes required for installation» Requires canopy, either aftermarket or OEM » Comes with FREE storage bag!
ENCLOSURES
How to Order Your Cab Enclosure
Determine the canopy you haveSTEP 1
N-Series Fiberglass Tel-Trax Fiberglass 1200, 1900, 2000
OEM LVP25334 Plastic D-Series Fiberglass
Define Year, Make, & Model
Fixed or Folding Rollbar?
Measure Top of Fender to Top of Rollbar
STEP 2
STEP 4
STEP 3
Choose your color:
STEP 5
NOTE: 5000 Series have (4) fender types. Please specify standard, black plastic flared, hi-crop, or wide metal when ordering
NOTE: If you do not have a canopy, we recommend the “N1” canopy. (see pg. 48)
51
TRACTORS
Hardtop Cab for John Deere TractorsWinter chores are hard enough without risking frostbite to do the job. Our hard top cabs keep you out of the wind, blow-ing snow, rain, and sleet that make winter tractor operation miserable!
These cabs are composed of 16 gauge steel tube frames, covered with an extremely strong, yet light weight ripstop vinyl fabric that resists abrasion, water, fire, mildew, and rot. Window material is non-puckering, shatter resistant lexan, that can sustain sub-zero temperatures without cracking. Top is made of molded ABS Plastic with UV inhibitor for durability and appearance
» No holes to drill!» Forward inclination of windshield minimizes
glare and contact with falling snow and rain» Installation is made quick and simple with
illustrated instructions.» Removal and re-assembly is simple from
season to season» Hinged, wire frame door
VEHICLE TYPE PART NO.4100 & 4110 (will not fit 4115) OT-11023
790 & 3005 OT-11137
1023e & 1026r OT-11845
2210 & 2305 compacts OT-11326
2320 Compact OT-11670
2520 & 2720 Compact OT-11746
4200, 4300, 4400 *includes glass windshield & electric wiper OT-40121
3120, 3320, 3520, 3720 *includes glass windshield & electric wiper OT-40291
Cab Options & Accessories
Glass Windshield Electric Wiper Kit Work Light Kit Rear Mirror Kit Caution Light
OT-10120 OT-10122 OT-11560 OT-11133 OT-9855
Shown on John Deere 2320
Hinged Doors!!
52
TRACTORS
12 Volt Ceramic Heater
» 300 Watts, 12 Volt» 15 Amp rating» 12 Gauge 15’ power cord» 3 speed adjustable fan» Direct hook up to your battery
DESCRIPTION PART NO.12 Volt Ceramic Heater RP-681
12 Volt Metal Fan
» 2 Speed Metal Fan» 7’ power cord» Mounts to any flat surface» Ball swivel base allows for adjustment
DESCRIPTION PART NO.12 Volt Metal Fan RP-1179
HEAT&AIRSELLERBEST
LIGHTINGSee page 20 fOR mORe LighTiNg!
Rollbar Mounted Light Bracket
DESCRIPTION PART NO.
Rollbar Mounted Light Bracket TS-RLB
» Heavy duty, steel construction» Rock-hard, black powder coated finish» Durable 1/2” u-bolt for steady mount» Includes hardware for 3” x 2” ROPS
LED Dually - Single
» 4 LED lights in a compact package» Small 3” - 3” dimension, this light can
fit anywhere» 1.1 Amps 15 watts 1300 Lumens
DESCRIPTION PART NO.
LED Dually - Single (Flood Pattern)
KP-97905
LED Dually - Single (Spot Pattern)
KP-97906
LED Dually - Double (Pair)
» 4 LED lights in a compact package» Small 3” - 3” dimension, this light can fit anywhere» 1.1 Amps 15 watts 1300 Lumens
DESCRIPTION PART NO.
LED Dually - Double (Flood Pattern)
KP-97910
LED Dually - Double (Spot Pattern)
KP-97911
53
TRACTORS
STEP 1
STEP 2
STEP 4
STEP 5
STEP 3
STORAGECOVERSProtect Your InvestmentYour tractor is an investment...finally you have a way to protect it! Save your paint, seat & operator compartment from the damaging effects of sun and rain. Our unique zippered design allows you to use the cover with or without the front loader bucket. The included bag attaches to the roll bar for easy access and storage. Heavy duty, 100% polyester, solution dyed fabric repels water without staining your tractor. Custom sewn to fit your tractor.
Storage BagThe included storage bag comes with a conveniently attached strap and Velcro system which can mount on the upper portion of the ROPS bar or on each side of the ROPS bar directly behind the seat. The straps clip to a plastic buckle on the strap and can be tightened by pulling the strap that comes through the male portion of the buckle. The zipper in the top portion of the bag is covered with a flap that helps to seal out any rain or snow to keep the cover as dry as possible when not in use. Make sure you only store a dry cover so not to induce any moisture that may mildew in a closed storage bag.
Simplified AttachmentThe full tractor cover is held in place by elastic in the bottom hem of the cover. The elastic hooks together under the three point hitch or any rear implement that is on the tractor. Fits on tractors with or without a loader. The loader and roll over protection bars extend out of the cover through openings which zip and/or Velcro together around those openings.
Water RepellencyThe fabrics we use are the right mix between water repellency and breathability. Tested for over 20 years in the cover market, our fabrics withstand the elements and offer enough breathing to minimize mold and mildew. In addition, the perimeter of the cover allows air circulation for added breathability.
Specify Year, Make, & Model
Provide the following answers:Do you have a front end loader? (Y or N)Do you have a grille guard? (Y or N)Do you have front weights? (Y or N)Do you have an exhaust stack? (if yes, is it on the left or right)
Measure maximum width at rear tires
Measure maximum length minus the loader
Choose color
How to Order
Silver Grey Charcoal Grey
55
LAWN TRACTORS
Hardtop Cab
» No holes to drill» Forward inclination of windshield minimizes glare and contact with falling snow and rain» Installation is made quick and simple with illustrated instructions» Removal and re-assembly is simple from season to season
Winter chores are hard enough without risking frostbite to do the job. These hard top cabs keep you out of the wind, blowing snow, rain, and sleet that make winter tractor operation miserable! Composed of 16 gauge steel tube frames, covered with an extremely strong, yet light weight ripstop vinyl fabric that resists abrasion, water, fire, mildew, and rot. Window material is non-puckering, shatter resistant lexan, that can sustain sub-zero temperatures without cracking. Top is made of molded ABS plastic with UV inhibitor for durability and appearance.
Cab Options & Accessories
Glass Windshield Electric Wiper Kit Work Light Kit Rear Mirror Kit Caution Light
OT-10120 OT-10122 OT-11560 OT-11133 OT-9855
CAB ENCLOSURES & CANOPIES
» Receivers attach to tractor using existing bolts to avoid drilling» Instantly removable without tools for mowing under low objects» Vinyl cover slips off without disassembly for truck or trailer transport» Installation is made quick and simple with illustrated instructions
Constructed of ripstop heavy duty vinyl, this sunshade is not only affordable, it’s also durable. Tool-free installation and removal after initial installation, keeps you mowing even under low branches. All standard sunshades come with a FREE rear screen panel. Stay cool while you work and protect yourself from UV rays.
Soft Top Sunshade
DESCRIPTION PART NO.316 (Onan) & 318 OT-9401Y
425, 445, 455 OT-9433Y
240, 245, 260, 265, 285 OT-9440Y
325, 335, 345, 355D, GX300 OT-9440Y
LT133, LT150, LT155, LT160, LT166, LT170, LT180, LT190 OT-30077Y
LX280, LX289, GT225, GT235, GT245, GX255 *will NOT fit GT242, GT262, or GT275 OT-30104Y
400, 500, 700 “X” Series (BM 20482) X465, X475, X485, X495, X575, X585, X595, X700, X720, X728 OT-30160Y
LX255, 266, 277 AWS, 279 AWS, 288 OT-30160Y
100 Series: 102, 115, 125, 135, 145, 155C, 190C OT-30212Y
L100, L108, L111, L118, L120, L130, LA100, LA110, LA120, LA130, LA140, LA150 OT-30212Y
VEHICLE TYPE PART NO.425, 445, 455 OT-11041
325, 335, 345,355D, GX300 OT-11082
LX280, LX289, GT225, GT235, GT245, GX255 *will NOT fit GT242, GT262, or GT275 OT-11105
316 (Onan) & 318 OT-11299
X-300 Series: X300, X304, X320, X324, X340, X360 OT-11577
X-500 Series: X500, X520, X530, X534, X540 OT-11606
2320 Compact OT-11670
SELLERBEST
56
LAWN TRACTORS
MAINTENANCE LIFTS
50” Pro Spiral Sweep 42” Pro Straight Sweep» 50” sweeping path» 26 cu. ft. capacity» 11” polypropylene brushes» Steel ball bearings on brush axle
DESCRIPTION PART NO.50” Pro Spiral Sweep OS-50SWP26
DESCRIPTION PART NO.42” Pro Straight Sweep OS-42LS
LAWN SWEEPERSOur lawn sweepers are the highest quality, most feature rich lawn sweepers in their class. Featuring extra large capacity hopper bags of 18-26 cubic feet capacity for less time spent emptying. The extra wide chute area is 33% larger than the competition and virtually eliminates clogging. High density brushes are extremely effective at collecting leaves, grass, pine needles, most types of nuts and other lawn debris. Our “no-slip” height adjustment has easy to remember positive-lock height settings that will not vibrate out of position. Heavy duty polyester hopper has reinforced edges and collapses for convenient storage.
» 42” sweeping path» 18 cu. ft. capacity» 11” polypropylene brushes» Steel ball bearings on brush axle
Lawn & Garden Tractor Lift
DESCRIPTION PART NO.Lawn & Garden Tractor Lift OS-TL4000
» Access and clean underside of mower decks» Change and service belts and blades» Change and service tires» 10” 2-Ply pneumatic tires
Lifts lawn and garden tractors, residential and commercial zero turn mowers for easy cleaning and maintenance.
Commercial Zero-Turn Mower Lift
DESCRIPTION PART NO.Commercial Zero Turn Mower Lift
OS-TL4500
57
LAWN TRACTORS
LOADING RAMPSOur industry leading loading ramps feature solid body construction with a punched tread pattern for superior traction over rung style ramps. Our ramps are perfect for loading lawn and garden tractors, UTVS, and even small wheeled items such as power washer and generators. Patented overlapping hinges provide added structural support, allowing for high load capacities of up to 2000 lbs. distributed weight per set. Arched ramps allow loading of low ground clearance items such as lawn tractors, and fold for convenient storage. Telescoping ramps are perfect for UTVs and motorcycles and store easily underneath. All models include Cam Buckle Tie-down straps to easily secure ramps to truck tailgate.
1500 Lb. Aluminum Ramps
DESCRIPTION PART NO.1500 Lb. Aluminum Ramps OS-1084A
1200 Lb. Steel Ramps
DESCRIPTION PART NO.1200 Lb. Steel Ramps OS-1084C
800 Lb. Steel Ramps
DESCRIPTION PART NO.800 Lb. Steel Ramps OS-1084D
» 84” x 10.5” x 2” (each)» 84” in open position, 63.5” in folded» 16 gauge steel» 800 lb capacity (400 lb per ramp)» Cam buckle tie down included» Weighs 71 lbs.
625 Lb. Telescoping Ramp
DESCRIPTION PART NO.625 Lb. Telescoping Ramp OS-1084TR
» Telescopes to 4 different lengths with the push of a button: 55”, 65”, 75”, 85”
» Storage length: 48”» 11 gauge aluminum» Nylon carry strap» Cam buckle tie down included» Weighs 23 lbs.
2000 Lb. Steel Ramps
DESCRIPTION PART NO.2000 Lb. Steel Ramps OS-1084
» 84” x 10.5” x 2” (each)» 84” in open position, 63.5” in folded» 16 gauge steel» 1200 lb capacity (600 lb per ramp)» Cam buckle tie down included» Weighs 71 lbs.
» 84” x 10.5” x 2” (each)» 84” in open position, 63.5” in folded» 12 gauge aluminum» 1500 lb capacity (750 lb per ramp)» Cam buckle tie down included» Weighs 49 lbs.
» 84” x 14.5” x 2” (each)» 84” in open position, 63.5” in folded» 14 gauge steel» 2000 lb capacity (1000 lb per ramp)» Cam buckle tie down included» Weighs 83 lbs.
Simple Folding Design
Superior Solid Body Design
58
LAWN TRACTORS
STEEL CARTSOur poly dump carts are available in different models and load capacities to handle a wide range of applications. All of our poly dump carts feature sloped backs and a single lever dump latch for easy loading and unloading. Our poly dump carts can be pulled with any lawn and garden tractor, zero turn mower or ATV-UTV with a rear hitch.
10 Cu. Ft. Welded Steel Cart
DESCRIPTION PART NO.10 Cu. Ft. Welded Steel Cart OS-3048HATV
Knock-Down Steel Cart» 30” W x 48” L x 12” H» 18 gauge steel» Removable tailgate» 1000 lb. capacity, 12 cu. ft» 16 x 6.5-8 tires
DESCRIPTION PART NO.Knock-Down Steel Cart OS-3048HKDATV
Flatbed Cart
DESCRIPTION PART NO.Flatbed Cart OS-FBATV
17 Cu. Ft. Welded Steel Cart» 34” W x 60” L x 15” H» Weight capacity 1500 lbs.» 16 gauge welded cart body» 18 x 0.5 x 6 UTV wheels» Pin hitch included» Weighs 225 lbs.
DESCRIPTION PART NO.17 Cu. Ft. Welded Steel Cart OS-3460HATV
» 34” W x 48” L x 2” H» 14 gauge steel frame» Expanded metal bed» 1000 lb. capacity» 18 x 9.5 x 8 UTV tires
» 30” W x 48” L x 12” H» 18 gauge steel» Removable tailgate» 1000 lb capacity, 12 cu ft.» 18 x 9.5 x 8 UTV tires
3-Way Hitch Adapter» Use with ball or pint hitch» Welded tow ring» Raise or lower hitch height 2”» 3/4” ball not included
DESCRIPTION PART NO.3-Way Hitch Adapter OS-3WHITCH
Ball Hitch Conversion Kit» Converts pin hitch to ball hitch» Galvanized steel coupler» Fits 1 7/8” trailer ball (not incl.)»
DESCRIPTION PART NO.Ball Hitch Conversion Kit OS-HK178
59
LAWN TRACTORS
POLY CARTSOur poly dump carts are available in different models and load capacities to handle a wide range of applications. All of our poly dump carts feature sloped backs and a single lever dump latch for easy loading and unloading. Our poly dump carts can be pulled with any lawn and garden tractor, zero turn mower or ATV-UTV with a rear hitch.
650 Lb Capacity Poly Cart» 30” W x 49” L x 11” H» 10 cubic feet» 3/4” solid steel axle» Weighs 63 lbs.
DESCRIPTION PART NO.650 Lb Cap. Poly Cart OS-3040P
750 Lb. Capacity Poly Cart» 48.25” W x 39” L x 13.75” H» Weight capacity 750 lbs.» 3/4” solid steel axle» 15” pneumatic turf tires» Weighs 84.5 lbs.
DESCRIPTION PART NO.750 Lb Cap. Poly Cart OS-4048P
500 Lb. Capacity Poly Cart» 30.5” W x 41” L x 30.5” H» 10 cubic feet» 5/8” dia. axle» 16” pneumatic turf tires
DESCRIPTION PART NO.500 Lb Cap. Poly Cart KP-86350
12.5 Cu. Ft. Swivel Dump Poly Cart» Hybrid cart for lawn & garden tractors and UTVs» 48.25” W x 39” L x 13.75” H» Weight capacity 1250 lbs.» Pass through axle w/ swivel dump capacity» Multi hitch function for pin, 1 7/8” and 2” ball» Weighs 110 lbs.
DESCRIPTION PART NO.12.5 Cu. Ft. Swivel Dump Poly Cart OS-4048 PHYB
Build-It Yourself Accessories
» Stake pockets» Divider slots» Ledge for 2nd level
Customize your cart with these unique features:
60
LAWN TRACTORS
LAWN ROLLERS
400 Lb Steel Roller
During winter and early spring, lawns can become severely damaged by the freezing and thawing of soil. Moles and ants can cause additional damage. Our lawn rollers will help your lawn regain the smooth, professionally groomed appearance that makes your lawn the envy of the neighborhood. Our lawn rollers feature rounded ends that are gentler on turf and easier to turn. All other models on the market have extended edges that can damage turf when turning. Featuring attractive and durable power coat finish that resists scratches and weather damage as well as a heavy-duty drawbar for years of worry free use.
600 Lb Steel Roller 915 Lb Steel Roller 1150 Lb Steel Roller» 18 dia. x 36” L» 14 gauge steel» 40 gallon capacity» Weight with water 400 lbs
» 24 dia. x 36” L» 14 gauge steel» 71 gallon capacity» Weight with water 600 lbs
» 24 dia. x 48” L» 13 gauge steel» 94 gallon capacity» Weight with water 915 lbs
» 24 dia. x 60” L» 11 gauge steel» 117 gallon capacity» Weight with water 1150 lbs
DESCRIPTION PART NO.400 Lb Steel Roller OS-9W
DESCRIPTION PART NO.600 Lb Steel Roller OS-10T
DESCRIPTION PART NO.915 Lb Steel Roller OS-48T
DESCRIPTION PART NO.1150 Lb Steel Roller OS-60T
48” Pro Core Plug 42” Core Plug 36” Spiker Hand Spiker» 48” Coring Path» 40 Core Pts., 2.5” depth» Tray holds 200 add’l lbs» 10 x 3.5 pneumatic turf tires» Foot lever engage-disengage
DESCRIPTION PART NO.48” Pro Core Plug OS-48CP
DESCRIPTION PART NO.42” Core Plug OS-42CP
DESCRIPTION PART NO.36” Spiker OS-36HW
DESCRIPTION PART NO.Hand Spiker OS-8
LAWN AERATORSOur state of the art core aerator pulls out 8 plugs per square foot as recommended by university turf care programs. Gentler and more effective than standard tow-behind aerators, the springs allow the tines to reciprocate creating more defined holes in the turf that emulates the action of powered aerators.
Our spike aerators provide an easy and effective way to aerate throughout the season. These aerators feaure innovative spring dividers between the heavy duty spike discs to minimize possible damage from rocks and roots.
» 32” Coring Path» 32 Core Pts., 2.5” depth» 4.10 x 3.50-4 pneumatic turf tires
» 18 spike discs» 14 gauge steel» 36” spiking width» 6” dia. transport wheels
» 8 spike discs» 9.5” dia. spike discs» 14 gauge steel» 14” spiking width
62
ZERO-TURN MOWERS
“RagTop” Fabric Sunshade Kit
» Heavy duty marine grade fabric» 7/8” bright anodized aluminum frame» Fits rollbars 24” - 38” wide» Allows for adjustments: 20 degree rear and
10 degree forward pitch
DESCRIPTION PART NO.“RagTop” Fabric Sunshade Kit TS-RTFF100
Easy-on, easy-off fabric canopy without spending a lot of money. Perfect for seasonal use on tractors and mowers.
CANOPIES» High gloss gel-coat finish with UV inhibitors» Factory matching color» Front & rear reflectors standard» Heavy duty, powder coated steel mounting brackets» Rubber isolator pads float the canopy in rubber to eliminate vibration noise
N1 Fiberglass Canopy Kit (45” x 58”)
VEHICLE TYPE PART NO.Mowers with 2” x 2” Forward Leaning ROPS TS-N1GZ22
Mowers with 3” x 2” Forward Leaning ROPS TS-N1GZ32
7000/7500 Precision Cut and 7500/8500 E-Cut Hybrid TS-N1GF23
8000E Hybrid Fairway & 1600T WAM TS-N1GZ32
Mowers with Vertical 2” x 2” Rollbar (i.e. 997) TS-N1G22
NX Fiberglass Canopy Kit (45” x 47”)
includes Brackets & hardware
VEHICLE TYPE PART NO.Mowers with 2” x 2” Forward Leaning ROPS TS-NXGZ22
Mowers with 3” x 2” Forward Leaning ROPS TS-NXGZ32
Mowers with 2” x 2” Vertical ROPS (i.e. 997) TS-NXG22
» High gloss gel-coat finish with UV inhibitors» Rubber isolator pads float the canopy in rubber to eliminate vibration noise» Heavy duty, powder coated steel mounting brackets» Front & rear reflectors standard» Factory matching color
63
ZERO-TURN MOWERS
» Receivers attach to tractor using existing bolts to avoid drilling» Instantly removable without tools for mowing under low objects» Vinyl cover slips off without disassembly for truck or trailer transport» Installation is made quick and simple with illustrated instructions
Constructed of ripstop heavy duty vinyl, this sunshade is not only affordable, it’s also durable. Tool-free installation and removal after initial installation, keeps you mowing even under low branches. All standard sunshades come with a FREE rear screen panel. Stay cool while you work and protect yourself from UV rays.
Soft Top SunshadeFits: Z225, Z245, Z425, Z445, Z465 (2007-2010)
VEHICLE TYPE PART NO.EZtrak 2010 and earlier OT-30340
EZtrak 2011 and newer OT-30468
Z-Trac with folding ROPS: 2” x 2” Max. width = 32” OT-30269
» Available in White, Green, or Black» Installation is made quick and simple with illustrated instructions» Removal and re-assembly is simple from season to season» ABS top dimensions: 35 1/4” W x 40 5/8” L
Hardtop ABS Plastic CanopyFits: Z-Trac with folding ROPS
VEHICLE TYPE PART NO.Hardtop ABS Plastic Canopy for Zero-Turn Mowers with a 2” x 2” or 2” x 3” ROPS - Green
OT-30382G
eaSy-ON eaSy-Off
64
LAWN TRACTORS
LIGHTINGSee page 20 for more Lighting!
Rollbar Mounted Light Bracket
DESCRIPTION PART NO.
Rollbar Mounted Light Bracket TS-RLB
» Heavy duty, steel construction» Rock-hard, black powder coated finish» Durable 1/2” u-bolt for steady mount» Includes hardware for 3” x 2” ROPS
LED Dually - Single
» 4 LED lights in a compact package» Small 3” - 3” dimension, this light can
fit anywhere» 1.1 Amps 15 watts 1300 Lumens
DESCRIPTION PART NO.
LED Dually - Single (Flood Pattern)
KP-97905
LED Dually - Single (Spot Pattern)
KP-97906
LED Dually - Double (Pair)
» 4 LED lights in a compact package» Small 3” - 3” dimension, this light can fit anywhere» 1.1 Amps 15 watts 1300 Lumens
DESCRIPTION PART NO.
LED Dually - Double (Flood Pattern)
KP-97910
LED Dually - Double (Spot Pattern)
KP-97911
Roof Mount Audio ConsoleFits: Tractors with a Canopy
» Marine waterproof retractable cover protects the DEH Pioneer CD Player
» MP3/WMA/WAV playback with volumen and memory settings» Connect your portable devices directly through the front AUX input» High intensity domelight option» Includes a high quality AM/FM antenna. » WR85B marine speakers are water, UV, and corrosion resistant and have
a one piece molded grill for speaker protection and durability.
DESCRIPTION PART NO.Roof Mount Audio Console - Standard (Black) TT-RMT
Roof Mount Audio Console - Standard (Camo) TT-RMTC
Roof Mount Audio Console - Standard (Carbon Finish) TT-RMTCF
Roof Mount Audio Console - Dome Light (Black) TT-RMTD
Roof Mount Audio Console - Dome Light (Camo) TT-RMTDC
Roof Mount Audio Console - Dome Light (Carbon Finish) TT-RMTDCF
AUDIO
Amplified Sound Wedge» Powerful 100 watt built in amplifier» 12’ Aux cable works with any iPod/MP3» 12’ power cord plugs into 12 volt plug» (2) marine grade 6.5” woofers/mid-range speakers and (2) tweeters» Mounts to any roof, or 1.5” - 2” roll bars» Separate docking station for iPod/MP3
DESCRIPTION PART NO.Amplified Sound Wedge VDP-4035A
TO12V
TO
FREEDocking Station
(iPod/MP3 player not included)
Roof Mount
Roll Bar Mount
65
NOTES_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
NOTES
66
This catalog is intended for authorized John Deere dealers only. All products offered are strictly aftermarket items, from a variety of manufacturers. No products have been tested by, approved by, or recommended by Deere & Company (John Deere) nor by Wiedmann Bros. Distributing Co.. Please review our terms and conditions or give us a call if you have any questions.
This catalog, and the website WiedmannBros.com, is fully operated independently by Wiedmann Bros. Distributing Co., LLC. . The John Deere logo and images are registered trademarks of Deere & Co., Moline, IL.
Disclaimer:
Wiedmann Bros. Distributing Co., LLC assumes no liability for errors in part numbers, pricing, listings, model applications or specifications. We reserve the right to change product quality, descriptions, specifications, prices and applications
at any time without notice and with no further obligation.
The RepRODUCTiON Of aNy maTeRiaL fROm ThiS CaTaLOg iS fORBiDDeN WiThOUT The WRiTTeN CONSeNT Of WieDmaNN BROS. DiSTRiBUTiNg CO., LLC
Acceptance & General Policy:• WiedmannBros only accepts orders from authorized or franchised dealers.• We do not engage in retail sales and reserve the right to qualify any account
seeking to purchase from our print or online catalogs.• All orders are subject to acceptance at Wiedmann Bros. Distributing Co., LLC.• Most products are in stock and ready to ship, however some products are hand
made to order, and require extended lead times. Upon ordering, we will do our best to advise you of any related lead time.
Terms:• Dealers desiring an open account should request an application form and allow
7-10 days for processing. • Net 30: Open accounts are due 30 days from shipment. • Interest will be charged on past due balances at a rate not to exceed the
applicable state legal maximum.• ALL SALES ARE FINAL ON DISCONTINUED AND CLOSEOUT ITEMS.
Accounting:• Questions regarding invoices or statements should be directed to our
Accounting Department at: [email protected]
Service:• Prompt service is of primary consideration. • Every effort will be made to ship your order in the fastest & most economical
methods
Prices:• All prices are subject to change without notice• Prices do not include any special handling charges• Materials and specifications for all products are subject to change
without notice• All prices quoted are USD ($)
Minimum Order:• A minimum order of $50 net is required• All net orders less than $50.00 may be assessed a $5.00 processing fee
Cancellation Policy:• Orders for in-stock items can be cancelled for any reason prior to shipping• Shipped items are subject to a 15% restocking fee, and applicable shipping
charges
Manufacturer’s Direct Warranty:• All items are warrantied directly by the manufacturer. • All warranty items must be returned directly to the manufacturer (not
Wiedmann Bros.) after having obtained a RMA number from that manufacturer.
Returns:• A Wiedmann Bros Return Merchandise Authorization (RMA#) number must
accompany all returns. Do not return merchandise without a Return Mer-chandise Authorization.
• Products returned without a RMA# will be held or refused and directed back to the dealer
• Returns must be shipped according to the instructions of a Wiedmann Bros. customer service representative
• The Wiedmann Bros invoice number and the date the product was purchased must accompany all returns
• Shortage claims against any purchase order will be considered only if re-ported within seventy-two (72) hours of receipt of merchandise
• All defective merchandise must be returned prepaid. If found to be a manu-facturing defect, credit for freight will be issued
• Any non-custom product approved for return as a “customer convenience return” is subject to a 15% restocking charge and must be accompanied by an order of equal or greater value. The returned merchandise must also be re-sellable
• Damaged or used products not subject to warranty will be returned to the dealer freight collect
• Closeout and discontinued products will not be accepted for return or credit unless they were mis-shipped or covered by warranty
• Packages received without meeting the above guidelines will be refused and returned unopened
• Used fuel containers cannot be returned due to hazardous waste restrictions• Custom soft goods are not returnable• Items returned in new condition with marked or damaged packaging that is
not saleable will be subject to a repackaging fee of up to 35%
Disclaimer:• Wiedmann Bros. will not deviate from this printed program• Anything agreed upon that is not documented on this program will not be
honored by Wiedmann Bros.• Any additions or changes will require a revised program sheet.
General Provisions:• These terms govern all our sales and may not be changed except with our
written consent. Failure to return goods within 30 days of invoice date shall constitute acceptance by you of these terms, notwithstanding contrary terms in any purchase order submitted to Wiedmann Bros.
• Wiedmann Bros. makes no warranty as to the products distributed by us, express or implied, including without limitation any warranties or merchant-ability and fitness for a particular purpose. Wiedmann Bros. will however, pass on all warranties made by the manufacturer, who has sole responsibility for performing such warranties. If a dealer returns an item to Wiedmann Bros. for warranty issues and the item is warranted directly by the manufacturer, the item will be returned to the dealer.
• The manufacturer shall be solely responsible for any damage to person or property arising from the design, manufacture and testing of its products, and Wiedmann Bros. accepts no liability for such damages.
• Wiedmann Bros. shall not be liable for indirect or consequential damages.• If legal action is used to collect a past due account, the prevailing party shall
be entitled to its attorney’s fees and costs in addition to any other relief it may receive.
TERMS & CONDITIONS
6767
Visit our website to explore all the ways you can customize a new John Deere Gator utility vehicle, tractor, or mower.
» Access Dealer Pricing & Promotions» Place Purchase Orders» View Order Status & History» Track Shipments» Get Up-To-Date Product Information
Login Information:
User Email: _________________________________
Password: _________________________________
ORDER ONLINE
To Sign Up for Dealer Access Call
1-877-934-2444