tools for construction and maintenance in electricity

1SAB ELTEKNIK AB • PHONE +46 651-760 790 • [email protected] • WWW.SABP.SE

Tools for construction and maintenance in electricity, industry and telecommunications.

Hand tools

2018P R O D U C T C A T A L O G U E

2 SAB ELTEKNIK AB • PHONE +46 651-760 790 • [email protected] • WWW.SABP.SE

Screwdrivers and wrenches Ratcheting ring wrench 4Rubber handle 4Extension sleeves 4Reducing sleeves 4Torque wrench 5

Sealing Sealing pliers 5

Cutting tools Combination pliers MA-880 5Combination pliers Klein Universal 5Combination pliers J2000 5Cutter and wire stripper 5Cable cutter, NRA 6Combination pliers KCC-22 6Universal cutter S-50 6Blade S2 6Cable cutters model K 7Cable cutters model RCS 7Cable cutter Cactus 7Cable Spiking Gun CATU MP-213 7

Pipe tools Sub-duct cutter 8Sub-duct beveller 8Assembly tool BENTE 8Assembly tool for divided cableducts 8Divided cable-duct for joining subducts 9Hydraulic handheld cutters 9

Bolt cutters Battery BC1430X 10Charger CL1430HC 10

Battery-powered cutters Bolt cutter 11Battery-powered cutter, EK 11Electro-hydralic cable cutters EMK-95-120 11Battery powered cable cutter ASL 65 12Battery powered cable cutter ASL 85 12Stilo Cutter 12 Hydraulic pump CP-700 Hydraulic pump 13

Cutter heads PS-85 Cutter head 14PS-95 Cutter head 14PS-120 Cutter head 14Crimper head type III 14

Crimping tools and dies Crimping tool ESV130 15Crimping dies for MJPT sleeves 15Crimping tool P-HV130 15Crimping tool ESD60 16

Storage containers Storage case X2 16Die range case CP2S 16Tool and die case CP2MS 16

Crimping dies for EDP62 Crimping dies for EDP62 17Crimping dies Cu, DIN 17Crimping dies for aluminium, DIN 17Circular crimping dies 18Crimping dies for FeAl, DIN 18

Crimping dies for ELPRESS sleeves Crimping dies for Cu, Elpress 18Crimping dies for aluminium, Elpress 18Circular crimping dies 18Crimping dies for FeAl (BLL) joints with ELPRESS sleeves 19Crimping dies for C clamps 19

Crimping tool/hydraulic pliers Crimping tool ESD50 20Hydraulic crimping pliers HVD51 20

Crimping dies Crimping dies for ED52 21Crimping dies for Cu, DIN 21Crimping dies for aluminium, DIN 21Circular crimping dies 21Crimping dies for FeAl, DIN 22 Crimping dies for Cu, Elpress 22Crimping dies for aluminium, Elpress 22Circular crimping dies 22Crimping dies for C clamps 22Crimping dies for FeAl, Elpress 22

Strippers Stripper knife for outer casing 23Sheath and Plastic tube Cutter KMS 6 23INT Stripper tool for vulcanised semi-conductive layer 23Tool CWB/18-60-FEP for Semiconductor 23Stripper tool IMS2 24T handle for coring stripper sleeve PEXGuide sleeves for 10 kV cable 24Stripper tool for semi-conductors and PEX 35-90 mm diameter 24Stripper kit PEX for 10-20 kV 25Stripper kit IMS2 + INT + outer jacker 25Stripper kit FIX for 10-20 kV 25Stripper tool FK28 26Stripper tool BLL 26

Drills Drill bits 26

Contents


Smart tools to make your job easierElectricians and telecom engineers need

reliable tools that help streamline their pro-

cesses. SAB Elteknik provides a range of

hand tools with various features that make

every task a little easier.

The ratcheting ring wrench is an excellent

example: thanks to its open sleeves, it is able

to handle power-line pylons with long pin

bolts: The double-edged cable cutter that

quickly converts into a wire stripper is another

example of a smart tool.

We like to highlight our wire preparation

products in particular. Try the PEX tools, the

semiconductor lathe from Intercable and the

BEKU cutters. With the proper tools for the

job, working with medium and high-voltage

cables is child's play.

Are you missing something in our range?

Feel free to contact us. We are always on the

lookout for more smart tools for our product

portfolio.

Drill/screwdriver Dewalt Percussion drill/screwdriver, 18V DCD985M2 XRP XR 4,0Ah 27Drill/screwdriver, 18 VDCD780M2 XR 4,0Ah 27Impact wrench 18V DCF880M2 XR 4,0Ah 27Battery Dewalt DCB182 Slide 18V, 4,0Ah XR 28Charger Dewalt DCB105 10,8-18V, 4,0Ah XR 28Car charger Dewalt DCB119 10,8-18V, 4,0Ah XR 28

Heating tools Siever Matic LPG torches 29 Hot Air Tol E4500 29

Lighting Line flashlight HARDCASE PRO 29Headlamp PIXA 3 30Petzl Nao+ headlamp 30

Clearing tools Felling guide Stapeln 31Telescopic rod BMT-S 31K mount with UNC 3/4” thread 31

Pole saw, Metering equipment Pole Saw Samurai 32Tape measure 32Range finder Forestry 550 Pro 32

Other tools Terminal cabinet multi-key 33Line hammer Steel 33Hook key, round 33Hook key, straight 33Staple puller 33Bag for range poles 33

Cleaning Cleaning PF 34


Ratcheting ring wrenchReversing with open sleeve, letting the bolt through.Rubber handle included.

SAB no E no Socket width Measurements Weight, kg

Rubber handlesreplacement handles for gluing on ratcheting ring wrenches.

SAB no E no Fits wrench Weight, kg

Extension sleevesAutomatic locking when inserted into the wrench.

SAB no E no Socket width Length Weight, kg

13280900 E1622709 10-12 mm 225 x 34 mm 0.16 kg

13280910 E1622708 11-13 mm 225 x 34 mm 0.16 kg

13281000 E1622710 13-17 mm 265 x 45 mm 0.24 kg

13281020 E1622721 16-18 mm 315 x 50 mm 0.45 kg

13281100 E1622711 17-19 mm 310 x 50 mm 0.40 kg

13281200 17-21 mm 310 x 50 mm 0.40 kg

13281300 E1622712 19-24 mm 355 x 56 mm 0.68 kg

13281350 E1622734 24-30 mm 400 x 63 mm 1.10 kg

13281400 E1627714 27-30 mm 400 x 63 mm 1.10 kg

13281500 E1622715 22-27 mm 355 x 56 mm 0.68 kg

13281600 E1622716 32-36 mm 445 x 67 mm 1.40 kg

Personal safety equipment

13280700 13-17, 13-17L, 14-17L, 14-19L 0.03 kg

Screwdrivers and wrenches

13282000 E1622720 17 53 mm 0.08 kg

13282200 E1622722 19 53 mm 0.09 kg

13282300 E1622723 22 58 mm 0.09 kg

13282400 E1622724 24 58 mm 0.16 kg

13282600 E1622726 30 65 mm 0.26 kg

13282700 E1622727 32 68 mm 0.30 kg

13282800 E1622728 36 68 mm 0.30 kg

Reducing sleevesAutomatic locking when inserted into the wrench.

SAB no E no Socket width Length Weight, kg

13282900 E1622718 17 to 16 53 mm 0.08 kg

13283000 E1622719 19 to 18 53 mm 0.09 kg


Torque wrench• The torque is set with the knob on the back of the handle.• A scale indicates the torque range.• A crackling sound indicates the achieved torque.

SAB no E no Torque Measure- Length Weight, kg ments

10110670 E1622170 8-54 Nm ½” 280 mm 0.80 kg

10111310 20-100 Nm ½” 340 mm 0.70 kg

10111320 40-200 Nm ½” 440 mm 1.00 kg

Torque wrench, pliers

Sealing pliersSealing pliers with wire cutter.

SAB no E no Type Length Weight, kg

09999 E1618571 Sealing pliers 160 mm 0.10 kg

09999005 Cushion PT8A

09999010 Engraving/letter

09999020 Screw for cushion

Combination pliers MA-880Combination pliers with extra high transmission and good cutting performance Equipped with burner and crimping dies.

SAB no E no Length Weight, kg

12262160 E1616803 225 mm 0.40 kg

Combination Pliers Klein Universal Combination pliers with extra cutting power for hard wires.


12262100 E1616802 235 mm 0.20 kg

Combination pliers J2000 Combination pliers with extra cutting power for hard wires New comfortable handle.


12262130 E1616090 241 mm 0.50 kg

Cutter and wire stripper Cutter with wave-shaped blades for both cutting and stripping wire. Can be transformed into a cable knife. High capacity.

SAB no E no Model Length Cut/strip Weight, kg

12262200 E1621360 CC-22 162 mm 50/35 0.2-35 mm² 0.13 kg

12262300 CC-38 212 mm 50/70 1.0-50 mm² 0.15 kg

12262400 CC-60 244 mm 95/70 11-70 mm² 0.19 kg


Cable cutter, NRACutter for wire and cable. Rounded blades.

SAB no E no Model Length Cuts Weight, kg

Pliers, cutting tools

12262700 E1620540 NRA22 162 mm 50/35 mm² 0.16 kg

12262750 NRA38 212 mm 70/50 mm² 0.28 kg

12262800 E1621330 NRA95 210 mm 70 mm² 0.47 kg

12263000 NRA120 244 mm 95/70 mm² 0.52 kg

Combination pliers KCC-22Combination pliers with the following properties:• Cutting• Dismantling• Stripping

SAB no E no Type Weight, kg

12261000 E1621310 160 mm 0.16 kg

Universal cutter S-50 for Al Cu for stay linesS-50 is a universal cutter with replaceable blades for different tasks. This means that it is a very flexible and versatile cutter with new possibilities. You can cut an-ything from regular Al/Cu wires to stay lines and 8 mm bolts with the same cutter. The various blades and their capacity are shown below. The universal blade S2 is included when you purchase an S-50 and the blade can handle:

SAB no E no Dimensions (LxWxH) Weight, kg

12206600 E1621379 230 x 100 x 46 mm 1.14 kg

12206601 Case 350 x 170 x 50 mm 0.20 kg

12206002 Plastic case 255 x 210 x 57 mm 0.14 kg

12206603 Spare blade S1 63 x 45 x 6 mm 0.05 kg

Al Cu, 50 mm diameter FeAl line, 20 mm diameter (234 mm²)Steel wire, 14 mm diameter Steel reinforced cable, 50 mm diameterStay line, 25 mm²

Blade S2, a lifter for cleaning cogs and a plastic storage container are included on delivery. Case available separately.

Blade S2Al Cu, 50 mm diameter Stay line, 25 mm²Steel reinforced cable, 50 mm diameter FeAl line, 24.5 mm diameter (234 mm²)Steel wire, 14 mm diameter Solid steel rod, 10 mm diameterStainless wire, 8 mm diameter 8.8 Bolt, 8 mm diameter

SAB no E no Dimensions (LxWxH) Weight, kg

12206604 63 x 45 x 6 mm 0.05 kg


Cable cutters model KGeared cutter for Al and Cu wire. Replaceable blades.

SAB no E no Model Length Capacity Weight, kg

12206300 E1621371 K3 250 mm Ø 35 mm 0.8 kg

12206200 E1621373 K4 320 mm Ø 52 mm 1.0 kg

12206400 E1621375 KS45 230 mm Ø 45 mm 0.9 kg

Cutting tools

Cable cutters model RCSGeared cutter for Al and Cu wire. Replaceable blades. Robust and reliable model, handles steel reinforced wires. Cog cleaner in handle. RCS handles tasks that previously required hydraulic cutters.

Cable cutter CactusGeared cutter for Al and Cu wire. Replaceable blades.

Cable cutter CactusGeared cutter for Al and Cu wire. Replaceable blades.


12206000 E1621365 RCS62 410 mm Ø 62 mm 2.0 kg

12206100 E1621358 RCS80 610 mm Ø 80 mm 3.0 kg

12206500 E1621377 RCS100 570 mm Ø 100 mm 4.0 kg


12205800 E1621337 CC325 270 mm Ø 32 mm 0.60 kg


12205900 E1621341 CC525 450 mm Ø 52 mm 1.50 kg

Cable Spiking Gun CATU MP-213MP-213 cable spiking gun, for maximum safety in case of insecurity when cutting a power cable. The MP-213 pushes a knife into the cable by means of a black pow-der charge. The trigger is activated by a drawstring and the installer can then be in a protected place before shooting the knife into the cable. The trigger can rotate 360 degrees. Because smaller cable slots are included, MP-213 can handle cables 20-110 mm in diameter.

The MP-213 is also equipped with an extra security in the form of a 70 mm² CU ground cable. Comes in a bag complete with knife, cartridges, slots for smaller cable, earth cable and instruction manual.

60MP213 E1661980 Cable Spiking Gun CATU MP-213 including cartridges.

Ø 20-110 mm cable

8 kg

60MP21310 E1661981 Red cartridge 50 pack 0.1 kg

SAB no E no Model Spec Weight, kg


Sub-duct cutterFor an even edge when cutting subducts.

Pipe tools

Sub-duct bevellerGives a smooth edge when bevelling sub-ducts.


12262649 2-12 mm internal bevel 0.05

12262651 3-25 mm int/ext bevel 0.07

12262652 25 mm external bevel 0.07




Assembly tool BENTEThe ”BENTE” assembly tool is designed to facilitate assembling and disassembling pipes when joining. The tool works like scissors with different jaws for different pipe dimensions. The legs are long enough to provide a comfortable operating height. The tool also doubles as lifting tongs to adjust piping installation.

SAB no E no Description Weight, kg

57100210 E1653509 110 mm corrugated pipe 3.5 kg

57100207 Reducing 110 to 75 mm corr. pipe 0.4 kg

57100212 160 mm corrugated pipe 3.5 kg

57100208 Reducing 160 to 125 mm corr. pipe 0.4 kg

Assembly tool for divided cable ductsAssembly tool for pressing divided cable ducts together.


57052030 E1660995 Assembly tool for divided cable duct 32 mm

0.41 kg


0.44 kg


0.47 kg


2.80 kg


12262620 TC25 225 mm Ø 25 mm 0.50 kg

12262600 TC42 225 mm Ø 42 mm 0.50 kg

12262640 TC50 430 mm Ø 63 mm 1.10 kg


Hydraulic handheld cuttersCutters for Al, Cu, wire, steel and line. Reliable hydraulics and easy to handle. Head that can be opened and quick-locked, rotates 180°. Replaceable blades. Delivered in a padded bag.

* = cutting capacity – see table below.


12208300 E1621808 HVA 20 390 mm Ø 20 mm* 2.8 kg

12208314 E1621810 Variable blade for HVA20 0.1 kg

12208800 E1621830 HVA 24 426 mm Ø 24 mm* 4.0 kg


12208700 HVA 32 450 mm Ø 32 mm* 5.3 kg

12208715 Variable blade for HVA32 0.1 kg

12209000 HVA 55 500 mm Ø 55 mm* 6.0 kg

12209017 Variable blade for HVA55 0.1 kg

12208400 E1621835 HVA 85 650 mm Ø 85 mm* 6.8 kg


Hydraulic cutters

Divided cable-duct for joining sub-ductsTwo divided PVC cable ducts with lengthwise lock for joining sub ducts with cable.Standard length is one metre, sections up to two metres in length can be supplied.

Coupling for divided cable-ductsDivided clamping sleeve for securing the ducts for pressure.

57052032 E0665754 KHR32 divided cable duct for joining 32 mm sub duct 1 m 0.36 kg




57052038 E0665751 KHM32 Coupling for divided cable duct 32 mm



Cu wire 20 24 16 32 41 50 28

Al wire 20 24 16 32 41 55 46

FeAl line 20 24 16 32 38 50

Stay line 7tr 15 20 16 32 15 15

Stay line 19tr 16 20 16 32 20 20

Telecom cable 85

Underground cable Al

18 24 30 32 41 50 85

Solid Cu alloy 20 16 16 32 22 35 50

Solid Al alloy 16 16 16 32 20 28

Solid Fe wire 16 20 10 25 20 22

Solid Fe rod 16 20 10 25 16 19

Steel wire 20 24 16 32 25 30

HVA HVA HVA HVA HVA HVA HVA 20 24 30 32 40 55 85

SAB no E no Type Measurements Weight, kg


Chargers

Battery BC1430X• Li-Ion battery• 14.4V – 3.0 Ah• -20 to +50°C 138 x 99 x 75 mm• For charger CL1430HC

Charger CL1430HC• 220 Volt charger• Charges BB1430 and BA1420 in 60 minutes• 150 x 95 x 80 mm

SAB no E no Model Capacity Weight, kg

83221610 E1661127 Battery BC1430X 14.4V 3Ah Li-Ion 0.7 kg


83221760 E1661128 CL1430HC 220V BB1430 / BC1430X: 3.0 Ah – 60 min

0.8 kg

83221770 E1661130 Adapter 12/24V for CL1430HC

0.5 kg


Battery-powered cutter, EKLight, quick and versatile cutter for cutting Al and Cu. Perfect for restricted spaces.Powered by a 14.4 V Li-Ion battery. Dual controls with one hand for maximum safety. Cuts backwards and forwards.• Capacity: 30 cuts on 56 mm AL cable (4 x 240 mm²)• Max Cu cable 40mm• Battery BC1430X 14.4 volt, 3Ah Li-Ion

SAB no E no Model Max. diameter Weight, kg

Battery-powered cutters

83220300 E1621842 EK55KC Al 56 mm/CU 40 mm 5.0 kg

83220200 EK55 Al 56 mm/CU 40 mm 2.0 kg

83220290 CM-EK Metal storage container 3.0 kg

Bolt cutterTempered bolt cutter for cutting hard material. Adjustable and replaceable blades.


10001000 BK350 360 mm Ø 7 mm 0.90 kg

10001100 E1623920 BK450H 460 mm Ø 8 mm 1.50 kg

10001200 E1623922 BK600H 600 mm Ø 10 mm 2.60 kg

10001300 E1623924 BK750H 750 mm Ø 12 mm 3.90 kg

10001400 BK900H 900 mm Ø 15 mm 5.90 kg

Electro-hydraulic cable cutters EMK-95-120Large diameter scissors type cutter with fast advance operation. Powerful cable cutter that generate more than 120kN in the blades. The scissors type cut provides ease of use and improved accessibility.The dual side front handle allows easy handling of the cable cutter and can also be used as a stand. Cutting capacity Cu/AL: 70 mm.

SAB no E no Model Weight, kg

83220700 E1662009 EMK-95-120 9.4 kg


Stilo Cutter 40 mm• 18V Li-on Battery• Capacity 40 mm AL/CU cable• Pivotable cutting head• Supplied with Battery, Charger and Case


83220000 E1661208 Stilo Cutter 40 mm Complete 2 kg

Battery powered cable cutter ASL 85Electro-hydraulic cable cutter for Al- or Cu cable up to 85 mm diam. Head that can be opened and quick-locked. The compact design is easy to perform service on and comes with variable speed for easy positioning of blades on object.

• Cuts with 70kN compression• 18V/3,0Ah Li-Ion Battery• 360 degrees rotating head• Integrated LED illumination• 3 years warranty or 20 000 cycles• 2-component handle with optimal weight distribution• Ergonomic design for both left and right handed• Complete set including cable cutter, carry case, charger and one battery


83220080 E1661998 Battery powered cable cutter ASL 65, complete

65 mm Al/CU 8 kg

83271050 E1662007 Battery to CP700, ASL, Stilo 18V 3.0Ah 0.4 kg

83271200 E1662008 Battery charger 230 Volt 0.7 kg

Battery powered cable cutter ASL 65Electro-hydraulic scissor type cable cutter for Al- or Cu cable up to 65 mm diam. The scissors type cut provides ease of use and improved accessibility.The compact design is easy to perform service on and comes with variable speed for easy positioning of blades on object.

• Cuts with 45kN compression• 18V/3,0Ah Li-Ion Battery• 360 degrees rotating head• Integrated LED illumination• 3 years warranty or 20 000 cycles• 2-component handle with optimal weight distribution• Ergonomic design for both left and right handed• Complete set including cable cutter, carry case, charger and one battery


83220100 E1662006 Battery powered cable cutter ASL 85, complete

85 mm Al/CU 9 kg

83271050 E1662007 Battery to CP700, ASL, Stilo 18V 3.0Ah 0.4 kg

83271200 E1662008 Battery charger 230 Volt 0.7 kg

Battery-powered cutters


CP-700 Hydraulic pump• 700 bar pump with I-drive technology• Opposed-piston technology for faster feed and switching to high-pressure• Automatic cycle to correct compression pressure• No-spill fast couplings• Aerated temperature control• LED display with warnings and indicators• Error message regarding pressure, temperature, compression sequence, battery• Easy-to-use control dial for functions• Stores all crimping and cutting cycles in the internal memory• USB port for transferring stored data to PC


83271000 E1661131 CP700 Hydraulic pump 18V, 3.0 Ah Li 630 Bar 4.6 kg

83271001 E1661132 CP700 Hydraulic pump 18V, 3.0 Ah Li 700 Bar 4.6 kg

83271050 E1662007 Battery for CP700 18V – 3.0 Ah Li 0.5 kg

83271100 Adapter 230V for CP700

0.8 kg

Flow: 1.1 lit/min switches at 100 bar to 0.1 lit/min Pressure: 700 barBattery: Li-lon 18 V, 3.0 AhWeight: Only 4.6 kg with battery

Hydraulic pump


Cutting and crimping heads

PS-95 Cutter headLight and compact cutter head for Al and Cu cable, designed for use with our 700 bar hydraulic pumps.

Capacity: max 95 mm diameterPressure: 100 kNPressure: 700 bar


83272400 PS-95 Cutter head 9.4 kg

PS-120 Cutter headLight and compact cutter head for Al and Cu cable (with steel reinforcement), designed for use with our 700 bar hydraulic pumps. • Lockable cover with blade guide• Hydraulic fast coupling with guard




Crimper head type IIICrimping head for DIN crimping with type III dies, designed for our 700 bar hydraulic pumps.



83272600 Type III DIN 4.8 kg

PS-85 Cutter headLightweight and compact cutter head for Al and Cu cable, designed for use with our 700 bar hydraulic pumps.• Lockable cover with blade guide• Hydraulic fast coupling with guard





Crimp tool ESV130• Ergonomic design for good balance and easy handling• Piston pressure 130 kN• Power 200 W• Stroke, piston: 13 mm• Pivoting crimper head, 180°• Good accessibility between cables and in restricted spaces• One hand operation• Powered by a 18 Volt Li-Ion battery• Weight without battery 4.1 kg• Fits the Elpress crim ping dies in system 1300


Crimping tool and dies

Crimping dies for MJPT sleevesCrimping dies for Elpress die holder in system 1300 for crimping insulated sleeves for ALUS, type MJPT.


83252004 E0890140 E173 for ALUS 25-50 mm2 0.10 kg

83252008 E0890142 E215 for ALUS 95 mm2 0.10 kg

Crimping tool P-HV130Hand operated hydraulic crimping tool 1300

• Crimping capacit: 400 mm2 Copper• Crimping capacity: 240 mm2 Aluminium• Output Force 125 kN• Supplied with Case

Used together with System 1300 crimping dies


83250700 E1661898 P-HV130 5.1 kg

83251010 E1630625 Crimp tool ESV130 complete kit (ESV130+2xbattery+charger+case)

13.7 kg

Model KC contains ESV130 + 2 x BL1840 + CLM1890-HC + case.

83250810 Crimp tool ESV130 4.5 kg

83221620 Battery BL1840 18V 4Ah Li-Ion 0.6 kg

83221780 Charger CLM1890-HC 220V 1 kg

83251015 Storage box ESV130 7 kg

SAB nr Benämning Vikt, kgAccessories

Capacity• max 400 mm2 Cu• max. 240 mm2 Al, not pre-shaped• max. 120/120 C sleeves• max. FeAl + AlMgSi 99 mm²• max. ALUS insulating sleeves 95 mm²• Less than 7 seconds per crimping cycle


Crimping tool and Storage containers

Storage case X2Storage case for ED52, EDP62 and EV130.Standard briefcase, type NEFAB, with moulded styrofoam.Room for tool and one battery, charger, extra battery and a small number of crimping dies. Measurements: 570x380x170 mm (LxBxH)


8323VÄSKAEDPX2 X2 5.20 kg

Die range case CP2SNEFAB case with carrying handle. Water cut slots for a complete die range, 37 dies of type 9323S.Measurements: 450x300x100 mm (LxBxH).


8323VÄSKA CP2S-EDP 2.70 kg

Tool and die case CP2MSNEFAB case for complete storage of EDP62, battery, charge, extra battery and 37 pairs of dies.Measurements: 820x420x130 mm (LxBxH).


8323VÄSKA HEL CP2MS-EDP 7.30 kg

Crimp tool ESD60• Ergonomic design for good balance and easy handling• Piston pressure 65 kN (6,500 kg)• Power 200 W• Stroke, piston: 13 mm• Pivoting crimper head, 180°• Good accessibility between cables and in restricted spaces.• One hand operation• Powered by a 18 Volt Li-Ion battery• Weight without battery 3.5 kg• Pfister's dies G06-300 can be used directly in the EDP62 head, model G06 dies with adapter• For crimping Elpress and DIN sleeves, you select from our range of crimping dies, 8323S

Model KC contains ESD60 + 2 x BL1840 + CLM1890-HC + case.


83231010 E0890031 Crimp tool ESDP60 (ESDP60+2xbattery+charger+case)

13.2 kg

83231060 Crimp tool ESDP60 4 kg



83251015 Storage box ESD60 7 kg

Capacity• max 185 mm² Cu• max 150 mm² Cu tensile• max. 240 mm² Al, not pre-shaped• max. 300 mm² Al, pre-shaped• max. 240 mm² Al, not pre-shaped• max. 185 mm² Al 59 cable and BLX• max. 120/20 mm² FeAl cable• Less than 7 seconds per crimping cycle

SAB no Model Weight, kgAccessories


Crimping dies

Crimping dies for EDP62Crimping dies for crimping both DIN and Elpress sleeves.Manufactured from high-grade hardened steel.The dies are paired together with a steel spring.Markings as per below are stamped on the dies.

SAB no Marking Cu no- Cu tensile Steel sleeve die strain strength for FeAl

8323SU04E SU04E

8323SU06 SU06 10 31

8323SU07 SU07 49

8323SU08 SU08 16 10-16 62

8323SU09 SU09 99

8323SU10 SU10 25 25

8323SU12 SU12 35 35

8323SU14 SU14 50 50

8323SU16 SU16 70 70

8323SU18 SU18 95

8323SU19 SU19 95

8323SU20 SU20 120

8323SU22 SU22 150 120

8323SU25 SU25 185 150

8323SU28 SU28 240

8323SA12 SA12 16-25 16-25

8323SA12E E0890117 SA12E (513)

8323SA14 E0890118 SA14 (515) 35 35 31 31

8323SA16 E0890119 SA16 (517) 50 35 50 49 62

8323SA17 E0890120 SA17 (518E)

8323SA18 E0890121 SA18 (519) 70 50 70 62

8323SA20 E0890122 SA20 (520) 99

8323SA22 E0890123 SA22 (516) 95-120 70-95 95 99

8323SA25 E0890124 SA25 (514) 150 120 120

8323SA27 E0890125 SA27 150

8323SA28 E0890126 SA28 185

8323SA32 E0890127 SA32 240 185

8323SA34 E0890128 SA34 300 240

SAB no E no Marking Max. area Sleeve type

8323E140 E0890100 E140 25 mm² MJPT 10-25 / 10-25

8323E173 E0890101 E173 50 mm² MJPT 10-50 / 10-50

8323E215 E0890102 E215 95 mm² MJPT 10-95 / 10-95

Crimping dies for ALUS MJPT sleeves

Crimping dies Cu, DIN

SAB no E no Marking rm/sm sm not tensile AlMgSi Al sleeve on die pre-shaped pre-shaped strength tensile on FeAl no-strain strength tensile strength

Crimping dies for aluminium, DIN


Crimping dies

Circular crimping dies SAB no E no Marking For area mm² aluminium

8323SR095 E0890134 SR095 95 mm²

8323SR150 E0890135 SR150 150 mm²

8323SR240 E0890136 SR240 240 mm²

Crimping dies for Vu, Elpress

SAB no E no Marking die Cu sleeves mm²

8323SU04E E0890103 SU04E CUT10

8323SU06E E0890104 SU06E 10

8323SU07E E0890105 SU07E EXEL 10kV

8323SU08E E0890106 SU08E 16

8323SU10E E0890108 SU10E 25

8323SU12E E0890109 SU12E 35

8323SU14E E0890110 SU14E 50

8323SU16E E0890111 SU16E 70

8323SU18E E0890112 SU18E 95

8323SU20E E0890114 SU20E 120

8323SU22E E0890115 SU22E 150

8323SU25E E0890116 SU25E 185

8323SU28E SU28E 240

Crimping dies for FeAl, DIN

SAB no E no Marking For area, mm²

8323SU08 SU08 (Kp08) 62 mm² steel sleeve

8323SA16 E0890119 SA16 (Kp16) 62 mm² aluminium sleeve

8323SU09 SU09 (Kp09) 99 mm² steel sleeve

8323SA22 E0890123 SA22 (Kp22) 99 mm² aluminium sleeve

Crimping dies for aluminium, Elpress

8323SA12E E0890117 SA12E (513) 25

8323SA17 E0890120 SA17 (518E) 50-70

8323SA25 E0890124 SA25 (514) 95-120-150

8323SA32 E0890127 SA32 185-240

Circular crimping dies SAB no E no Marking For area mm² aluminium

8323SR095 E0890134 R095 95 mm²

8323SR150 E0890135 SR150 150 mm²

8323SR240 E0890136 SR240 240 mm²

SAB no E no Marking Sleeves Elpress for mm² on die rm/sm pre-shaped no-strain


Crimping dies for FeAl, Elpress

Crimping dies for FeAl (BLL) joints with ELPRESS sleeves

SAB no E no Marking For area mm²

8323B16NP B16NP 62 mm² aluminium sleeve

8323B6FE B6FE 62 mm² steel sleeve

8323B20NP B20NP 99 mm² aluminium sleeve

8323B8FE B8FE 99 mm² steel sleeve

SAB no E no Marking For area mm² Elpress, type C clamp

8323SC04 E0890129 SC4 (509) 10 / 6-10 C4

8323SC05 E0890130 SC5 (511) 10-16 / 10-16 C5

8323SC06 E0890131 SC6 (512) 16-25 / 16-25 C6

8323SC09 E0890132 SC9 (510) 25-35 / 16-2525-35 / 25-3535-50 / 16-2535-50 / 25-3535-50 / 25-50

C8-6C8C9-6C9-8C9

8323SC11 E0890133 SC11 50-70 / 25-70 C11-8C11-9C11

8323SC13 SC13 70-95 C13

Crimping dies for C clamps


Crimping tool/hydraulic pliers

Crimping tool ESD50Versatile crimping tool that crimps all makes of sleeves up to 150 mm².Ergonomically designed with one-hand operation.Powered by Li-Ion 18 volt battery• Piston pressure 55 kN (5,500 kg)• Power 200 W• Stroke 13 mm• Swivelling crimping head, 180 grader.• Weight without battery 3.5 kg

Capacity• max 95 mm² insulated ALUS sleeves, type MJPT• max 120 mm² Cu• max. 150 mm² Al, not pre-shaped• max. 150 mm² Al, pre-shaped• max. 150 mm² pre-shaped• max 99 mm² Al 59 cable and BLX• max 99/16 mm² FeAl line

Model – KC, complete kit contains: ED52, charger CL1430HC, 2 batteries BC1430X and storage case.


Hydraulic crimping pliers HVD51Hand-pumped crimping pliers, using the same head as ED52.• Crimps up to 150 mm²• 55 kN in pressure• 13 mm stroke lengthDelivered in a carrying case.Can be used with crimping dies from the Elpress system, V500 and T2600 series.


83211000 E0890028 HVD 51 2.10 kg

Model KC contains ESD50 + 2 x BL1840 + CLM1890-HC + case.

83221001 E0890030 Crimping tool ESDP50 (ESDP50+2xbattery+charger+case)

13.2 kg

83221110 Crimping tool ESDP50 4 kg



83251015 Storage box ESD50 7 kg

SAB no Description Weight, kgAccessories


Crimping dies

Crimping dies ED52Manufactured from high-grade hardened steel, electrogalvanized.The dies are reversible, providing two areas per die pair.Markings as per below are stamped on each die.

SAB no E no Marking Max. area Sleeve type

83221800 E0890040 E173 25 mm² - 50 mm² MJPT 10-50 / 10-50

83222000 E0890042 E215 95 mm² MJPT 10-95 / 10-95

Crimping dies for ALUS MJPT

83222200 501502

10120

20-31

83222400 503504

1695

10-16 62

83222600 505506

2570

83222800 507508

3550

Crimping dies for Cu, DIN

SAB no E no Marking rm/sm sm not tensile AlMgSi Al sleeve no-strain pre-shaped strength tensile on FeAl strength tensile strength83223600 513

51416-25150 120 120

20

83224200 E0890058 515516

3595-120 70-95

3595

31 3199

83223400 E0890060 517518E

50 35 50 49 49+62

83223500 E0890066 519520

70 50 70 6299

Crimping dies for aluminium, DIN

SAB no E no Marking For area mm² aluminium

83224600 E0890062 D5 MR95 95 mm²

8322470083224800

D5 MR120D5 MR150

120 mm²150 mm²

Circular crimping dies

SAB no Marking Cu no-strain Cu tensile strength Steel sleeve on FeAl


Crimping dies

83225500 E0890070 521Fe62

62 mm² Aluminium sleeve62 mm² Steel sleeve

83225600 E0890072 522Fe99

99 mm² Aluminium sleeve99 mm² Steel sleeve

Crimping dies FeAl, DIN

83222100 E0890043 499E500E

EXCEL 10CUT 10

83222200E E0890044 501E502E

10120

83222400E E0890046 503E504E

1695

83222600E E0890048 505E506E

2570

83222800E E0890050 507E508E

3550

Crimping dies for Cu, Elpress

83223600E E0890056 513E514E

2595-120-150

83223400 E0890060 517518E

50-70

Crimping dies for aluminium, ELPRESS

83224600 E0890062 D5 MR95 95 mm²

83224800 E0890064 D5 MR150 150 mm²

Circular crimping dies

509 10 / 6-10 C4

83223000 E0890052 510

25-35 / 16-2525-35 / 25-3535-50 / 16-2535-50 / 25-3535-50 / 25-50

C8-6C8C9-6C9-8C9

83223200 E0890054 511 10-16 / 10-16 C5

512 16-25 / 16-25 C6

Crimping dies for C clamps

83225500E B16NPB6FE

62 mm² Aluminium sleeve, LFEAL6262 mm² Steel sleeve, LFEAL62

83225600E B20NPB8FE

99 mm² Aluminium sleeve, LEFAL9999 mm² Steel sleeve, LFEAL99

Crimping dies for FeAl, Elpress

SAB no E no Marking For Fe Al cable mm² and sleeve

For Cu sleeves, mm²SAB no E no Marking For area mm²

SAB no E no Marking For Fe Al cable mm² and sleeve

SAB no E no Marking For area mm² Elpress, type C clamp

SAB no E no Marking For area mm² rm/sm pre-shaped no-strain

SAB no E no Marking For area mm² aluminium


Strippers

Stripper knife for outer casing• For PE-jacketed cable > 20 mm diameter• Depth of cut 0.5-5 mm• Both lengthwise and lateral stripping• Jointed between pump handle and blade

INT Stripper tool for vulcanised semi-conductive layer• Strips the vulcanized semi-conductive layer up to a thickness of 1.2 mm.• Handles diameters of 10-50 mm, 12 kV=800 mm², 24 kV=630 mm², 36 kV=500 mm².• The blade can be adjusted between 0.1 and 1.2 mm in 0.1 mm increments.• The stripper tool is automatically fed forward along the cable when it rotates. The tool can also rotated in place for a straight finished edge.• The tool can be opened and attached to the cable from the side.• Replaceable blades

12212000 E1620352 INT BZ, kit with stripper, silicone paste and case 0.80 kg

12212002 E1620354 Spare blade 0.20 kg

12212004 E1620355 Silicone paste, tube 0.10 kg


12210100 E1620350 12002 0.30 kg

12210110 E1620351 Spare blade

12210112 Blade holder


Sheath and Plastic tube Cutter KMS 6For slitting of cable sheath and plastic tubes.Max thickness 6 mm.Complete in case.


12210500 Sheath and Plastic tube Cutter KMS 6 0.35 kg

12210510 Spareblade for KMS6 0.01 kg

Tool CWB/18-60-FEP for SemiconductorThe CWB/18-60-FEP enables the user to easily remove the bonded semi-conductor with a chamfer on the transition, leaving a very smooth finish over the insulationThe CWB 18-60 works without siliconeTool capacity:Diameter 18-60 mmThicknees max 1.8 mm


12212250 Tool CWB/18-60-FEP for Semiconductor 0.35 kg

12212260 Spareblade for Alroc CWB/18-60-FEP 0.01 kg


Stripper tool IMS2IMS2 is a variable adjustment tool for stripping PEX insulation from 10-45 kV cables.The tool cuts through the PEX insulation completely through in a spiral. One blade runs along the conductor in order not to damage it and to lift the PEX layer.The blade can be set to five different angles depending on how steep an ascent you need on the sprial. TO achieve a straight edge, the blade is set in its start position and rotated for the last cut.• Diameter 15-52 mm • Depth of cut 0-15 mm SAB no E no Model Weight, kg

Strippers

12212100 E1620501 IMS 1.0 kg

12212110 Spare blade 0.02 kg

T handle for coring stripper sleeve PEX• Twist grip for use with PEX coring stripper sleeves • Adjustable in length• Length 175 mm

Coring stripper sleeve for PEX• Replaceable blades • Bayonet mount for T handle • Standard for 20 kV cable• With guide sleeve for 10 kV cable

SAB no E no Area mm² Cable Weight, kg

12212600 E1620502 25 20 kV 0.05 kg

12212602 35 20 kV 0.05 kg

12212604 E1620357 50 20 kV 0.05 kg

12212606 70 20 kV 0.05 kg

12212608 E1620358 95 20 kV 0.05 kg

12212610 120 20 kV 0.05 kg

12212612 E1620359 150 20 kV 0.05 kg

12212614 185 20 kV 0.05 kg

12212616 E1620360 240 20 kV 0.05 kg

12212620 E1620361 Spare blades, all sizes

Stripper tool for semi-conductors and PEX 35-90 mm diameterIT-1000-013 lathes semi-conductors and PEX with an outer diameter of 35-90 mm.The tool is variable with interchangeable blades.

12212200 IT-1000-013 0.40 kg

12212210 Spare blade semi-conductor 0.02 kg

12212220 Spare blade PEX 0.02 kg

12212601 25 10 kV 0.02 kg

12212603 Grey coring stripper sleeve 10 kV 35 10 kV 0.02 kg

12212605 50 10 kV 0.02 kg

12212607 70 10 kV 0.02 kg

12212609 95 10 kV 0.02 kg


12212613 150 10 kV 0.02 kg


12212617 240 10 kV 0.02 kg

Guide sleeves for 10 kV cable


12212500 E1620356 125200 0.30 kg

SAB no Area mm² Cable Weight, kg



Stripper kit

Stripper kit IMS2 + INT + outer jacketKit with stripper tool IMS52 for stripping PEX insulation from 10-45 kV cables.INT for stripping semi-conductive layer 10-50 mm and stripping tool for outer jacketPE-jacketed cable > 20 mm diameter.

12212770 IMS2 + INT + Outer jacket 0.62 kg

Stripper kit FIX for 10-20 kVStripper kit with T handle and four coring stripper sleeves for PEX insulation, deliv-ered in a plastic case with moulded slots for each tool. The T handle is adjustable in length. The kit also includes strippers for vulcanized semi-conductive layers and a tool for stripping the outer jacket.

Contents:• Jacket stripper• Stripper tool, INT-BZ, for vulcanised semi-conductive layer• Silicone paste• T handle• Coring stripper sleeve, PEX 20 kV 50 mm²• Coring stripper sleeve, PEX 20 kV 95 mm²• Coring stripper sleeve, PEX 20 kV 150 mm²• Coring stripper sleeve, PEX 20 kV 240 mm²• Guide sleeves for 10 kV cable of the above sizes• Storage case

Stripper kit PEX for 10-20 kVStripper kit with T handle and four coring stripper sleeves for PEX insulation, delivered in a plastic case with moulded slots for each tool. The T handle is adjustable in length.

SAB no E no Weight, kg

12212730 E1620366 2.00 kg

Contents:• T handle• Coring stripper sleeve, PEX 20 kV 50 mm²• Coring stripper sleeve, PEX 20 kV 95 mm²• Coring stripper sleeve, PEX 20 kV 150 mm²• Coring stripper sleeve, PEX 20 kV 240 mm²• Guide sleeves for 10 kV cable of the above sizes• Storage case

SAB no E no Contents Weight, kg

SAB no E no Weight, kg

12212720 E1620365 2.00 kg


Stripper tool FK28Easy-to-manoeuvre stripper tool that cuts both lengthwise and around the cable, thanks to the rotating knife.• Adjustable depth of cut• For power cable, telecom cable and optical cable

SAB no E no Model Measurements Weight, kg

Stripper tools, drilling tools

12211200 E1620128 FK28 Ø 6-28 mm 0.05 kg

12211210 E1620129 Spare blade

Stripper tool BLLRecommended for BLL cable, type AMO Kraft. The tool strips the insulation in a spiral and is self-feeding. The blade is adjustable and lifts the insulation without damaging the conductor.

Drill bitsSelf-feeding twist drill in high-quality steel.

SAB no E no Diameter Length, mm Weight, kg

13137200 E1651620 16 290 0.12 kg

13137400 E1651622 19 330 0.15 kg

13138700 E1651624 21 330 0.15 kg

13137600 E1651626 22 330 0.18 kg

13137800 E1651628 25 330 0.22 kg

13138400 E1651632 19 500 0.30 kg

SAB no E no Model Measurements Weight, kg

12210000 E1620558 NP400 Ø 6-30 mm 0.15 kg

12210013 Spare blade


Drill/screwdriver

Percussion drill/Screwdriver 18V DCD985M2 XRP XR 4.0Ah• The latest generation XRP with new 4.0 Ah XR battery technology• Three-speed gearbox in metal for longer run time and life.• 22 torque settings for perfect control• 13 mm speed-chuck with automatic spindle lock for quick bit changes.• Intelligent switch provides total control• White LED with delay for better visibility and torch function• Improved grip design provides greater control and maximum comfort• Steel belt clip and strong magnetic bit holder• Multi-charger for use with 18, 14.4 and 10.8 V XR Li-Ion slidepack batteries• Part of the intelligent XR lithium ion series, designed for efficiency and speed

Standard equipment:• Pivotable side handle • multi-charger • 2 slidepack batteries • Storage case

SAB no E no Model Description

13130060 Percussion drill/screwdriver, 18V

Drill/Screwdriver 18V DCD780M2 XRP XR 4.0Ah• The latest generation 18V XR drill/screwdriver with new 4.0 Ah XR- battery technology• Compact light-weight design for use in restricted spaces• Two-speed transmission in metal for long run time and life• 14 torque settings for perfect screw driving precision• Intelligent switch provides total control• 13 mm one-ring speed chuck with spindle lock for quick and easy one-handed bit changes• White LED with delay for better visibility and torch function• Improved ergonomic design and rubber grip for greater comfort• Li-Ion slidepack battery for easy assembly and disassembly• Multi-charger for use with 18, 14.4 and 10.8 V XR Li-Ion slidepack batteries• Steel belt clip and strong magnetic bit holder• Part of the intelligent XR lithium ion series, designed for efficiency and speed

Standard equipment:Multi-charger • 2 slidepack batteries • Storage case


13130070 Drill/screwdriver

Impact wrench 18V DCF880M2 XR 4,0Ah• The latest generation impact wrench with new 4.0 Ah XR battery technology• Compact light-weight design for use in restricted spaces• Improved ergonomic design and rubber grip for greater comfort and control• Metal gearbox for efficient power transmission and long life• Front casing in aluminium provides better thermal dissipation and increases the life of the motor• Intelligent switch provides total control• 1/2” (12.7 mm) square mount• White LED with delay• Steel belt clip and strong magnetic bit holder• Multi-charger for use with 18, 14.4 and 10.8 V XR Li-Ion slidepack batteries• Part of the intelligent XR lithium ion series, designed for efficiency and speed

Standard equipment:• Multi-charger • 2 slidepack batteries • Storage case


13130080 Impact wrench


Batteries, chargers

Battery Dewalt DCB182 Slide 18V, 4,0Ah XR• DEWALT XR 4.0 Ah Li-Ion battery technology for longer run time and optimum strength for finishing applications quickly• LED charging indicator• Light-weight design gives the user 4.0 Ah at the same weight and size as an 18 V 3.0 Ah battery• No memory effect and almost no self-discharging, for maximum productivity and shorter charging time• Compatible with all DEWALT XR Li-Ion 18 V tools• Excellent electrical characteristics• No memory effect

SAB no E no Model 13130090

Charger Dewalt DCB105 10,8-18V, 4,0Ah XR• Charges 10.8/14.4/18 V XR Li-Ion slidepack batteries• Charges one 1.5 Ah battery in 30 minutes• DEWALT's Two-stage charging system• Diagnostics with LED indicator shows battery charging level: charged, charging, current problems and battery too hot or too cold.• Intelligent charger that adapts the charging to the battery type to improve battery life


Car charger Dewalt DCB119 10,8-18V, 4,0Ah XR• Charges XR Li-Ion slidepack batteries with voltages 10.8, 14.4 and 18 V• Charges a 3.0 Ah battery in 90 minutes• DEWALT's two-stage charging system• LED indicator shows charging status: charged, charging, current problem and battery too hot or too cold.• Intelligent charger varies the charging depending on battery type



Heating tools, lighting

Siever Matic LPG torchesComplete kit packaged in a wooden case Fits P bottles, connecting to C bottles requires a regulating valve and adapter.The kit comprises: Handle with pietzo ignition, large soft flame burner and hot air burner with bayonet coupling, 4 metre hose, regulating valve.

91001000 Siever Matic complete heating kit 3.80 kg

91001010 Handle with Piezo ignition

91001015 Hot air burner 3334P, 38 mm

91001020 Soft flame burner 3341P, 38 mm

91001025 Soft flame burner 3348P, 50 mm

91001030 Spare hose 4m


Hot Air Tool E4500Convenient hot air tool for shrink-on tubing and end caps.


91000300 Hot air tool E4500 400-700° Celcius 1.2 kg

91000310 Gas cartridge for E4500

Line flashlight HARDCASE PROSuper-strong white LED flashlight, providing full inspection lighting up to 160 metres with shatter-proof lens.Hardcase Pro is durable and tolerates falls of up to five metres.50,000 hour life using LED and five hours of operation per charge, using the rechargeable NiHM battery. Capacity 500 lumen.

Hardcase Pro is delivered with:• 12 Volt car charger• 220 Volt charger• Shoulder strap


727512025 E9451355 Hardcase Pro Spotlight 0.80 kg


Lighting

Headlamp PIXA 3The PIXA series is designed for professionals that regularly work in darkness. The lamp is robust, durable and easy-to-use, for comfortable work at close range.Easy to use even if you are wearing safety gloves.PIXA is ATEX certified and waterproof to one metre. PIXA uses digitally regulated light, the LEDs shine with full effect throughout their entire burning time.

Range is 55 metres and burning time is three hours.

The headlamp automatically switches to energy-saving mode when the batteries need charging, which means 15 metre range for up to 10 hours. The lamp can be angled at 180 degrees to protect the lens.

SAB no E no Model Weight, g

72E78 E9451477 Headlamp PIXA 3 160 g

Petzl NAO+ headlampRechargeable headlamp with self-adjusting light, so-called REACTIVE LIGHTING technology. The luminous flux and the power from the two super diodes automatically adapts to the user's light requirements as the brightness adapts to the amount of light that hits the built-in sensor.

• Tailored and comfortable light that does not dazzle• Maximum “hands-free” time• Increased life through optimised use of the energy source• Tailored performance with OS by Petzl

SAB no E no Model Weight, g

72E36AHR Petzl headlamp NAO+ 185 g

SpecificationsLuminous flux: 7-750 LumenLight source: 2 LEDsReach: 10m-140 m:Burning time: 12 h 30 min-6 h 30 minIP rating: IP X4


Clearing tools, Telescopic rod

Felling guide Stapeln 29Mechanical directional felling guide with safety lock. Disc-clutch with friction ele-ment stops it from reversing. 25 to1 transmission ratio. Collapsible.


38340500 1850 mm 14.5 kg

K mount with UNC 3/4” threadSuitable for Telescopic rod BMT-S.


12517417 K mount with UNC 3/4” thread 0.2

Telescopic rod BMT-STelescopic rod made from reinforced fibreglass pipes. The upper part is filled with foam in accordance with IEC 60855. The length of each section can be adjusted as required by means of lock rings. Adapter for K mount (type for voltage tester) included when purchasing rod with a 3/4” UNC mount. It is intended as a pole saw and can also be used to control the voltage in the selected area. When in use, the upper section should always be fully extended.The rod is manufactured in accordance with standard EN62193.Care instructions: Be careful with the upper section, which is insulated.

SAB no Description Tool Length Quantity Weight, mount sections kg

12517550 Telescopic rod BMTS / Pole saw

Thread mount UNC 3/4”

8.75 m 5 5.2 kg


Universal K mount

8.75 m 5 5.2 kg



12 m 6 7.25 kg


Universal K mount

12 m 6 7.25 kg



6 m 4 3.4 kg


Universal K mount

6 m 4 3.4 kg


Pole saw, Metering equipment

Tape measure Tape measure made from fibreglass and marked on both sides. Handle and casing in hard plastic.


21538200 E1635172 30 m 0.5 kg

21538400 E1635174 50 m 0.8 kg

Range finder Nikon Forestry 550 ProForestry Pro is an updated model of the range finder Forestry 550. This award-win-ning and popular range finder for the forestry industry, now comes equipped with triangulation, eagerly awaited by the market. This new features enables you to measure the height of a tree, even if its top or base is hidden from view by branch-es or bushes, making it impossible to use traditional separation metering since it requires the laser to reach those points.Three-point metering: The height of the tree is calculated based on the horizontal distance and the angle to the tree top and the base. The ease of use makes it easy to measure actual distance, horizontal distance and height.The system for target priority switching has two metering modes:

• The priority mode for distant objects show the distance to the object in question among several results from one single measurement.• Priority mode for the first object shows the distance to the nearest object among several results from one single measurement.

The results are shown on both internal and external LCD screens. The external screen shows all results simultaneously. A high quality monocular viewfinder with 6x magnification and multi-layered coating for a bright image. The high viewing position makes the image clear for people wearing glasses. Is able to measure the distance to different objects in quick succession for up to 20 seconds when the button is pressed. Waterproof (up to one metre for ten minutes), but not intended for underwater use. The battery compartment is water repellent.

SAB no E no Designation Weight, kg

61601200 Metering range 10 - 500 m /33 - 999 feet. 0.21 kg

Pole saw SamuraiThe Samurai saw's teeth are designed to retract in order to facilitate lopping. Cutting knife and holster included in the kit. Product number 12517100.


12517100 E1652858 Saw blade with mount 0.20 kg

12517200 E1652857 Saw blade Samurai 0.10 kg

12517300 Chopping knife


Other tools


10003000 E1646567 KSN KOMBI 4 0.10 kg

Line hammer SteelRock hammer with steel shaft.

Hook key, round

Hook key, straight

13129500 430 mm 0.80 kg

Staple puller Steel crowbar.

Bag for range polesPVC quiver with foam-reinforced bottom and padded shoulder strap. Holds around 30 range poles. Pocket for markings and hammer.


13128100 E1624152 320 mm 0.80 kg


13129000 E1622649 490 mm 0.90 kg


13128200 390 mm 1.00 kg


71-2101 E1635876 1,000 mm 0.50 kg


Terminal cabinet multi-keyKey with four functions: Fibreoptic and cable TV, EBR lock, triangular lock, bayonet lock.

Cleaning

Cleaning PFAn eco-friendly, alkaline and hygienic detergent for cable and tools in connection with preparing and joining. PF is delivered in soaked rags, bottles and flat packs.

SAB no E no Type Volume Weight, kg

54509110 E1693058 PFWWB250 Bucket with 250 cloths 6.0 kg

54509115 E1693059 PF1 one-litre bottle

54509112 PF flat pack Bucket with 24 cloths


SAB Elteknik offers a complete

range of products for electricians.

Whether you work with fibreoptics

or power cables – we provide

materials. tools, instruments,

machines, implements and safety

equipment that help you in your

work.

Would you like advice or cannot

find what you are looking for?

Contact us, our job is to guide

you to the right equipment.

SAB Elteknik AB, ÖverlidaMjöbäcksvägen 2 512 60 Överlida, SwedenPhone +46 651-760 790 Fax +46 651-156 79

SAB Elteknik AB, Ljusdal Plåtslagargatan 27 827 35 Ljusdal, SwedenPhone +46 651-760 790 Fax +46 651-156 79

[email protected] www.sabp.se

tools for construction and maintenance in electricity

Documents