9000 SERIES PROFESSIONAL RATCHETING CRIMP TOOLSTOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.358 Phone (815) 316-9080 • Fax (815) 316-9081

Tool

s

9000 Series Professional Ratcheting Crimp Tools and Die Sets

12-900012-900112-900212-900312-900412-900512-900612-900712-900812-900912-901012-901112-901212-901312-901412-901512-901612-901712-901812-901912-902012-902112-902212-902312-902412-902512-9026

Heavy Duty Crimping Tool, Frame Only10-22 AWG Insulated Terminals, Color Coded Nests10-22 AWG Non-insulated Terminals10-22 AWG Full Insulated Quick Disconnect Terminals with Thinner Wire BarrelsRG-58, 59/62 BNC/TNC Coaxial ConnectorsCambridge CP-88, CP-89, RG-58, 59/62 BNC/TNC8-22 AWG Non-insulated Terminals16-26 AWG Mini Insulated Rings, Spade and Butt SplicesFiber Optic SMA, SMB, SFR ConnectorsAMP Fiber Optic SMA or SFR Type ConnectorsRG-58/174 and Belden 8218, 50 and 75 Ohm CablesRG-59, RG-6, 8281 50 and 75 Ohm CablesN-series RG-8/11 ConnectorsRG-174, Mini 59 BNC/TNC ConnectorsRG-6, RG-174, 8281 CableTwinax (Hex)Plenum and Non-plenum, Thinwire also PTFEAMP Thinwire Dual Crimp BNC Coaxial ConnectorsAMP RG-58 Dual Crimp BNC/TNC Coaxial ConnectorsAMP RG-59/62 Dual Crimp BNC/TNC Coaxial ConnectorsMini UHF and BNC/TNC 5 CavityRG-59, RG-6, RG-6 Quad Shield F-type CATV ConnectorsModular Plug RJ-45 8 Position Keyed or Non-keyedModular Plug RJ-11 2, 4, and 6 PositionModular Plug DEC MMJ 6 Position with an Offset Release TabModular Plug AMP RJ-45 8 Position/Primary Strain Relief is Located Further Back on DieModular Plug RJ-22 2 and 4 Position

All Die Sets Below12-910112-910212-910312-910412-910512-910612-910712-910812-910912-911012-911112-911212-911312-911412-911512-911612-911712-911812-911912-912012-912112-912212-912312-912412-912512-9126

ReplacementDie SetDescription

BulkPart No.

RetailPart No.

Crimp pressure adjustment.

Ergonomic handle design forcomfortable extended use.

Crimp release for operator safety.

Ratcheting design insurespositive exacting crimps.

Wide selection of interchangeable dies. Dies are marked with application.Heavy duty steel construction.Compound leverage for ease of operation.

Tools1 6-13 22 06 12 1:04 PM Page 358

359For the latest information–www.gcelectronics.com

9000 SERIES PROFESSIONAL RATCHETING CRIMP TOOL (Cont.)TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

Replacement Die SetsRetailPart No.

12-9101

Die ExamplesCompleteTool Part

12-9001

12-9102 12-9002

12-9103 12-9003

12-9104 12-9004

12-9105 12-9005

12-9106 12-9006

12-9107 12-9007

12-9108 12-9008

12-9109 12-9009

12-9110 12-9010

12-9111 12-9011

12-9112 12-9012

12-9113 12-9013

Replacement Die Sets (Cont.)RetailPart No.

12-9114

Die ExamplesCompleteTool Part

12-9014

12-9115 12-9015

12-9116 12-9016

12-9117 12-9017

12-9118 12-9018

12-9119 12-9019

12-9120 12-9020

12-9121 12-9021

12-9122 12-9022

12-9123 12-9023

12-9124 12-9024

12-9125 12-9025

12-9126 12-9026

Tools1 6-13 22 06 12 1:04 PM Page 359

INSTALLER CRIMP TOOLSTOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.360 Phone (815) 316-9080 • Fax (815) 316-9081

Tool

s

Installer Crimping Tools

817512-00112-00412-00530-995512-00212-08812-247512-40012-45012-45412-45512-45612-459

5-in-1 Crimping ToolTelco® Crimping ToolsTelco® Crimping ToolsTelco® Crimping ToolsTelco® Crimping ToolsDura CrimpStandard Ratcheting Compression ToolDual Cut & Crimp ToolCrimping Tool & Terminal Asst.Coaxial Crimp ToolModular Crimp ToolCrimping ToolRatcheting Crimp ToolCoaxial Tool Kit

Strips Wire 10-22 GaugeTelco®/Telephone WireTelco®/Telephone WireTelco®/Telephone WireTelco®/Telephone Wire

Strips 10-22 GaugeRG-59, RG-6, RG-11Modular Line CordRG-58, RG-59, RG-62RG-58, RG-59, RG-62, RG-6RG-58, RG-59, RG-62, RG-6

CableSizeDescription

BulkPart No.

RetailPart No.

Solderless Terminals8 Contact Professional4 & 6 Contact ProfessionalModular Hand Set 4 Contact10 Contact Professional4 & 6 Contact Modular/4 Position Hand Set

8P8C/RJ-45, 6P4C/RJ-11 & 6P2CSolderless TerminalsCoaxialRJ-11, RJ-45, Modular 6 & 8 Way“F” Type & BNCCoaxialCoaxial

Crimps Connector

122223456789

1011

FigureNo.

Fig. 1 Fig. 2 Fig. 3

Fig. 4 Fig. 5 Fig. 6

Fig. 7 Fig. 8

Fig. 10 Fig. 11

Fig. 9

Tools1 6-13 22 06 12 1:04 PM Page 360

361For the latest information–www.gcelectronics.com

INSTALLER CRIMP TOOLS (Cont.)TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

Installer Crimping Tools

12-46012-46112-46312-46412-46612-55612-740312-740412-880030-9951 30-9951-BU

Crimping ToolCoaxial Center Conductor CutterIDC Crimp ToolD-Sub/Double-D Service Tool4-way Indent CrimperCompression Crimp ToolStatic Dissipative Grip ShearsSmall Blade Copper Wire ShearsProfessional Quality Compression ToolModular Crimp Tool

Flat (Ribbon)

RG-6Cuts Wire Up to .04”Cuts Between SMD LeadsRG-59 & RG-6Modular Line Cord

CableSizeDescription

BulkPart No.

RetailPart No.

10-22 AWG & D-subminiature ContactsDual Crimp CoaxialIDCD-sub & Double-D High Density20-26 AWG D-subminiature ContactsSD-446-BU

Male “F” Compression4 Conductor Modular & Handset

Crimps Connector

123456789

10

FigureNo.

Fig. 1 Fig. 2 Fig. 3

Fig. 4 Fig. 5 Fig. 6

Fig. 7 Fig. 8

Fig. 10Fig. 9

Tools1 6-13 22 06 12 1:04 PM Page 361