top of form mailedall contactsgroups top of form name adi
TRANSCRIPT
MailedAll ContactsGroups
Top of Form
Bottom of Form
70 of 70
Top of Form
Name Details Show in Quick Contacts?
adi smileman [email protected] Auto
ahalya kumari [email protected] Auto
ANIL KUMAR KOTHA
[email protected] Auto
anjana karthika [email protected] Auto
anjana karthika [email protected] Auto
Anjaneyulu Anji [email protected] Auto
anjaneyulu anke [email protected] Auto
anke anjaneyulu [email protected] Auto
Anusha The Star [email protected] Auto
chitti the king [email protected] Auto
Coworkers 0 contacts
Dheerudu.....Uma @BLORE
[email protected] Auto
Family 0 contacts
Friends 0 contacts
giri ...something new [email protected] Auto
gopi raghula [email protected] Auto
hareesh nagothi [email protected] Auto
HARI KRISHNA [email protected] Auto
Indrasena Reddy@9989900666
[email protected] Auto
Jampannagari srinivasulu
[email protected] Auto
kamurthi madhavi [email protected] Auto
kedar nath [email protected] Auto
Kondareddy R 991 661 80 90
[email protected] Auto
kumar naidu [email protected] Auto
lakshminareshp [email protected] Auto
madhu sudhan [email protected] Auto
mumaneeni nagendra [email protected] Auto
My Contacts 1 contacts - N.V.KRISHNA REDD NUSSAM
N.V.KRISHNA REDD NUSSAM
[email protected] My Contacts, My Contacts
Auto
nag raj [email protected] Auto
nagendra p [email protected] Auto
narasimha chowdary [email protected] Auto
Navya@@@@@ Always b happy
[email protected] Auto
Obulapathi Naidu Challa
[email protected] Auto
pampapathi " from Blore"
[email protected] Auto
parthuDmm [email protected] Auto
Phaneendra kumar [email protected] Auto
phanidhar (setty) [email protected] Block
phanidhara venkata [email protected] Auto
plakshminaresh [email protected] Auto
prasad saddala [email protected] Auto
praveen challa [email protected] Auto
prince mahesh chowdary
[email protected] Auto
pswamy242 [email protected] Auto
R@ME$H CHOWDARY
[email protected] Auto
rajasekarreddy yerragunta
[email protected] Auto
raju karna [email protected] Auto
rajukarna [email protected] Auto
ramana reddy [email protected] Auto
repati murali [email protected] Auto
repati murali [email protected] Auto
sampath rs [email protected] Auto
sandeep madamanchi [email protected] Auto
sarath chandra [email protected] Auto
Sateesh Kumar Bandaru (SKB)
[email protected] Auto
service [email protected] Auto
shaik_shamsuddin [email protected] Auto
shaik. shamsuddin [email protected] Auto
smiley.tkg [email protected] Auto
sumala [email protected] Auto
sumala.rgm52 [email protected] Auto
swetha chowdary [email protected] Auto
v.dhanunjaya [email protected] Auto
venkat mohan [email protected] Auto
venkata prasad [email protected] Auto
Venkatesh jalla [email protected] Auto
vpandari [email protected] Auto
vpandari [email protected] Auto
vpandarinath [email protected]
yenubari raghu [email protected]
Bottom of Form
I. Products
A. Manufactured Products
1. Urea (46% N) (White free flowing) – Prilled
Specifications as per the Fertilizer Control Order 1985
(i) Moisture per cent by weight, maximum 1.0 (ii) Total nitrogen, per cent by weight, (on dry basis) minimum 46.00 (iii) Biuret per cent by weight, maximum 1.5 (iv) Particle size--90 per cent of the material shall pass through 2.8 mm IS sieve and not less than 80 per cent by weight shall be retained on 1 mm IS sieve
Application:
Fertilizer
2. Anhydrous Ammonia
Specifications as per the Fertilizer Control Order 1985
(i) Ammonia per cent by weight, minimum 99.0 (ii) Water per cent by weight, maximum 1.0 (iii) Oil content by weight, maximum 20 ppm
Application:
Used for production of Urea, DAP, Ammonium Sulphate and Ammonium Nitrate (for fertilizer, explosives, herbicides and insecticides)
Used for water treatment, fermentation, tanning and food additives
B. Marketed Products
1. Diammonium Phosphate (18-46-0) - DAP
Specifications as per the Fertilizer Control Order 1985
(i) Moisture per cent by weight, maximum 1.5 (ii) Total nitrogen per cent by weight, minimum 18.0 (iii) Ammoniacal nitrogen form per cent by weight, minimum 15.5 (iv) Total nitrogen in the form of urea per cent by weight, maximum 2.5 (v) Neutral ammonium citrate soluble phosphates (as P 205) per cent by weight, minimum 46.0 (vi) Water soluble phosphates (as P 206) per cent by weight, minimum 41.0
(vii) Particle size -90 per cent of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve. Not more than 5 per cent shall be below than 1 mm size.
Application: Fertilizer
2. Muriate of Potash – MOP (Potassium Chloride)
Specifications as per the Fertilizer Control Order 1985
(i) Moisture per cent by weight, maximum 0.5.(ii) Water soluble potash content (as K20) per cent.by weight, minimum 60.0.(iii) Sodium as NaCl per cent by weight.(on dry basis) maximum 3.5.(iv) Particle size- 95 cent of the material shall pass through 1.7 mm IS sieve and be retained on 0.25 mm IS sieve.
Application: Fertilizer
The largest industrial use for potash is in the manufacture of potassium hydroxide (KOH). KOH is a feedstock for other potassium chemicals used in a wide variety of industrial processes such as glass making, pharmaceuticals, food processing, and the manufacture of textiles.
As Water softener: Potash is a dietary alternative to salt. The ability of potash to reduce water hardness is virtually the same as saltPotash is used in the preparation of hydraulic fracturing solutions for oil well drilling to control swelling in certain clay formations
Food processors and pharmaceutical manufacturers use potash in various products. Potash is also used as an animal feed supplement
3. Zinc Sulphate Heptahydrate (ZnSO4 7H2O)
Specifications as per the Fertilizer Control Order 1985
(i) Free flowing crystalline form (ii) Matter insoluble in water per cent by weight, maximum 1.0 (iii) Zinc (as Zn) per cent by weight, minimum 21.0 (iv) Lead (as Pb) per cent by weight, maximum 0.003 (v) Copper (as Cu) per cent by weight, maximum 0.1 (vi) Magnesium (as Mg) per cent by weight, maximum 0.5 (vii) pH not less than 4.0
Application: Fertilizer
4. Zinc Sulphate Mono-hydrate (ZnSO4 H2O)
Specifications as per the Fertilizer Control Order 1985
(i) Free flowing powder form (ii) Matter-insoluble in water, per cent by weight, maximum 1.0 (iii) Zinc (as Zn). per cent by weight. Minimum 33.0 (iv) Lead (as Pb), per cent by weight, maximum 0.003 (v) Copper (as Cu), per cent by weight, maximum 0.1 (vi) Magnesium (as Mg), per cent by weight, maximum 0.5 (vii) Iron (as Fe), per cent by weight, maximum 0.5 (viii) pH not less than 4.0
Application: Fertilizer
5. Chelated Zinc as Zn-EDTA
Specifications as per the Fertilizer Control Order 1985
(i) Free flowing crystalline / powder form (ii) Zinc content (Expressed as Zn), per cent by weight, minimum 12.0 in the form of Zn-EDTA (iii) Lead (as Pb), per cent by weight, maximum 0.003 (iv) pH 6.0 – 6.5
Application: Fertilizer
6. Formulation No. 4 (in Andhra Pradesh only)
Nutrient contents on percentage basis
(i) Iron (as Fe), per cent by weight, minimum 4.00 (ii) Manganese, per cent by weight, minimum 3.00 (iii) Zinc (as Zn). per cent by weight. minimum 6.00
(iv) Copper (as Cu), per cent by weight, minimum 1.00 (v) Molybdenum (as Mo), per cent by weight, minimum 0.05 (vi) Boron (as B), per cent by weight, minimum 2.00
Application: Fertilizer
7. Di-Sodium Octa Borate Tetra Hydrate (Na2 B8O13.4H2O)
Specifications as per the Fertilizer Control Order 1985
(i) Boron (as B), per cent by weight, minimum 20.0 (ii) Matter insoluble in water, per cent by weight, maximum 1.0 (iii) Lead (as Pb), per cent by weight, maximum 0.003
Application: Fertilizer
8. Speciality Fertilizers
PRODUCT Available Nutrients % As
NO3 NH4 NH2 P2O5 K2O EC @ 1% pH @ 1%
MULTI -K (13-00-46) 13.2 - - 46 1.2 9.0-11.0
Poly feed: 19-19-19+MEN 5 4 10 19 19 0.88 5.3
MAP (12-61-00) - 12.5 - 61 - 0.69 4.0-5.0
MKP (00-52-34) - - - 52 34.5 NA 4.0-5.0
MULTI – K Potassium Nitrate 13-00-46
MAPMono Ammonium Phosphate
12-61-00
MKPMono Potassium Phosphate
00-52-34
Polyfeed NPK Blend 19-19-19 + MEN*
Polyfeed NPK Blend 13-40-13+ 2MgO + MEN*
Polyfeed(Non-nominated FCO Grade)
NPK Blend 15-15-30+ME
SOP Sulphate of Potash 00-00-50
Calcium Nitrate Calcium Nitrate 15.5-00-00-19
* MEN: Micro Elements Normal
Fertigation Products
Foliar Application
Foliar application recommendations of speciality fertilizers on different
crops
CropSpecialty Fertilizer
Concentration (%)
Number ofsprays
Stage to be sprayed
Rice Polyfeed 1% 1Maximum tillering
(45 DAP)
Multi-K 1% 1
Grain filling(75 DAP)
Maize Polyfeed 1% 1Knee high(45 DAS)
Multi-K 1% 1
Grain filling(75 DAS)
Soybean Polyfeed 1% 1Maximum vegetative(45 DAS)
Multi-K 1% 1
Grain filling(60 DAS)
Sunflower Polyfeed 0.50% 1Grain floret(60 DAS)
Multi-K 0.50% 1
Grain filling(75 DAS)
Cotton Polyfeed 1% 1Square formation
(60-75 DAS)
Multi-K 2% 2
2 and 4th week after first flowering
Chilli Polyfeed 1% 1Flower initiation
(60 DAP)
Multi-K 2% 2
Fruiting(75 and 90 DAP)
Tomato Polyfeed 1% 1Flower initiation
(45 DAP)
Multi-K 1% 1
Fruiting(60 DAP)
Bhendi Polyfeed 1.00% 2
Fortnightly interval from fruit
formation(60 and 90 DAS)
Cabbage Polyfeed 1% 1Curd initiation
(45 DAP)
Multi-K 1% 1
Curd development(60 DAP)
Cauliflower Polyfeed 1% 1Flower initiation
(45 DAP)
Multi-K 1.00% 1
Flower development
(60 DAP)
Turmeric* Polyfeed 1.00% 2 90 and 120 DAP
Multi-K 1.00% 1 150 DAP
Baby corn Polyfeed 1% 1Knee high(30 DAP)
Multi-K 1% 1
Cob initiation (45 DAS)
Gherkins Multi-K 1% 2
Fortnightly interval from fruit
formation(25 and 40 DAS)
Urd bean Polyfeed 1.00% 1Flowering (35 DAS)
Multi-K 1% 1
pod development(55 DAS)
Mung bean Polyfeed 1% 1Flowering (35 DAS)
Multi-K 1% 1
Pod development(55 DAS)
DAS : Days After Sowing; DAP : Days After Planting. Spray has to be done at the critical physiological stage indicated. Spray dates mentioned are tentative. * In intercropped turmeric, speciality fertilizers spray can be initiated after the harvest of intercrop, wherever intercropping is