torsional testing machine · ä ³ Ø Ø d 3 Ø 5 ý % y Þ v ² , ñ À d à ø i a % y ñ b &...
TRANSCRIPT
소형볼트의 파괴토크력, 축력, 각도, 정·역 토크력을 시험, 측정할수 있으며 X-Y 테이블과 발란스 분동, 가압분동 등으로 구성되어 있습니다.
This system can test and measure the failure torque, axial force,angle, positive/reverse torque of small bolts. It is composed of an X-Ytable, balance weight, and pressurized weight.
Torsional Testing Machine비틀림 시험기
Torsional Testing Machine비틀림 시험기
DTF-T100 SERIES
CAPACITY
ACCURACY
RESOLUTION
SAMPLE FIX.
CENTERING
DEAD WEIGHT
DETECTOR
100 N.m
WITHIN ± 0.8 %
1/200,000 F.S.
X-Y TABLE
X-Y LASER
~ 10 kgf
TORQUE CELL
다양한 재료를 각도제한하여 반복시험에 의한 변형이나 파단 등을단순측정 할 목적으로 제작 되었습니다.
This system is to simply measure the deformation or rupture of variousmaterials by repetitive tests under a controlled angle.
DTE-840CAPACITY
ACCURACY
RESOLUTION
SAMPLE FIX.
DISPLAY
DETECTOR
100 N.m
WITHIN ± 2 %
1/20,000 F.S.
X-Y TABLE
DIGTAL INDICATOR
TORQUE CELL
Material Tester
59
복합구조 금속환재를 고속으로 회전하면서 원심력에 의한 변형이나회전력 제거시 회전력감쇄를 측정, 연구·개발 목적으로 제작 되었습니다.
This system is to rotate combined structure metal rods at a high speedand then measure their deformation by centrifugal force or theattenuation of a turning force when the turning force is removed, or forthe purpose of research and development.
DTE-808S
Torsional Testing Machine회전력 감쇄 시험기
RPM
SAMPLE WEIGHT
SAMPLE LENGTH
COOLING
SAFETY FENCE
~ 20,000 rpm
10 kg
500 mm
WATER COOLING
BULLET-PROOF PLATE
모터나 감속기 등을 비틀림 시험하여 변형이나 특성 등을 정확하게측정 분석할 목적으로 제작 되었습니다.
It's designed to measure properties and deformation of motor orreduction gear precisely after apply torsional force.
Torsional Testing Machine감속기 비틀림 시험기
DTE-301CAPACITY
ACCURACY
TABLE
CONTROL
SAMPLE
MODE
LOADING
DETECTOR
(5 ~ 50) kN.m
WITHIN ± 1 %
X-Y TABLE
P.C CONTROL
REDUCER
TORSION TEST
SERVO MOTOR
TORQUE CELL
60
다양한 선재를 비틀림 파괴할 수 있도록 제작되었으며 선재의 비틀림 특성을 측정, 분석할 목적으로 제작 되었습니다.
This system is to measure and analyze the torsion characteristics ofvarious cables.
Torsional Testing Machine
선재 비틀림 시험기
DTF-502PCAPACITYACCURACYTABLECONTROLSAMPLEMODELOADINGWEIGHTCHUCKINGDETECTOR
(5 ~ 20) kN.mWITHIN ± 1 %X AXIS SLIDING TABLEP.C CONTROLSTEEL WIRETORSION TESTSERVO MOTORORDER MADEMANUAL OR HYDRAULICTORQUE CELL
다양한 선재를 비틀림 파괴할 수 있도록 제작 되었으며 선재의 파괴시까지 회전수 토크력을 단순 측정 할 목적으로 제작 되었습니다.
This system is to simply measure the RPM and torque of various wirecables until they are broken.
DTF-502MCAPACITYACCURACYTABLECONTROLSAMPLEMODELOADINGWEIGHTCHUCKINGDISPLAYDETECTOR
(60, 100, 200) N.mWITHIN ± 2 %X AXIS SLIDING TABLESEMI-AUTO, MANUALSTEEL WIRETORSION TESTMOTORORDER MADEMANUAL OR HYDRAULICDIGTAL INDICATORTORQUE CELL
Material Tester
61
다양한 선재, 환재를 4점벤딩시험 할 수 있도록제작 되었으며 주문형으로 환경장치를 부착 할수 있습니다.
This system is to perform a 4-point bending test forvarious cables and round bars. An environmentaldevice may be attached to it according to theuser’s request.
고장력볼트의 토크, 축력, 각도를 측정하는 시험기로서용량별 또는 주문형으로 제작이 가능합니다.
The system is to measure the torque, axial form, andangle of high tensile bolts. It may be manufacturedaccording to standard capacity or according to theuser’s request.
DTF-501A / DTF-501BMODELCAPACITYCONTROLSAMPLESPEEDLOADINGWEIGHTCHUCKINGDISPLAYLEVER
DTF-501A100 N.mSEMI-AUTO, MANUALΦ 10 mm(1,500 ~ 3,000) rpmMOTOR100 kgMANUALCOUNTER(N)200 mm
DTF-501B200 N.mSEMI-AUTO, MANUALΦ 12 mm(1,500 ~ 3,000) rpmMOTOR160 kgMANUALCOUNTER(N)250 mm
Bolt Torsional Testing Machine
볼트 축력 시험기
DT-HSBT25 / DT-HSBT50 / DT-HSBT100
MODELCAPACITY
ACCURACYBOLT SIZECONTROLSAMPLEOUTPUTLOADINGSPEEDCHUCKINGDETECTOR
DT-HSBT25TORQUE 1 kN.mTENSILE 200 kNWITHIN ± 1 %M(5 ~ 6)P.C CONTROLBOLTTORQUE, TENSILE, ANGLESERVO MOTOR(1 ~ 5) rpm, (1 ~ 100) rpmMANUALTORQUE & LOAD CELL
DT-HSBT50TORQUE 2 kN.mTENSILE 500 kNWITHIN ± 1 %M(12 ~ 24)P.C CONTROLBOLTTORQUE, TENSILE, ANGLESERVO MOTOR(1 ~ 5) rpm, (1 ~ 100) rpmMANUALTORQUE & LOAD CELL
DT-HSBT100TORQUE 5 kN.mTENSILE 1 MNWITHIN ± 1 %M(24 ~ 36)P.C CONTROLBOLTTORQUE, TENSILE, ANGLESERVO MOTOR(1 ~ 5) rpm, (1 ~ 100) rpmMANUALTORQUE & LOAD CELL
SPECIAL TYPE - 1 kg.m
Rotary Bending Tester회전 굴곡 시험기
62
다양한 환재, 선재를 고온으로 급속히 가열하며 고속회전을 하여 소재의 변형 및 특성을 연구·개발할 목적으로 제작 되었습니다.
This system is to rapidly heat various cables and round bars underhigh temperatures, rotate them high speeds, and then measure andresearch sample deformation characteristics.
Hot TorsionalTesting Machine
핫토션 시험기
DTF-502P
CAPACITYACCURACYTABLECONTROLSAMPLEMODELOADINGTEMP.COOLINGDETECTOR
200 kN.mWITHIN ± 1 %X AXIS SLIDING TABLEP.C CONTROLSTEEL WIRETORSION TESTSERVO MOTOR1200 ℃WATER COOLINGTORQUE CELL
Material Tester
63
M30~M64의 규격 볼트, 너트를 결합하여 TORQUE를 시험할 수있도록 설계 되었습니다.
This system is designed to combine M30~M64 standard bolts andnuts and then test torque.
BOLT TORQUE TESTER고용량 볼트 토오크 시험기
DT-HSBT3MNCAPACITYACCURACYCONTROL SAMPLE LOADING OUTPUT
30,000 N·m± 1 %P.C CONTROLBolt M30 ~ M64300 ton (3MN)Force, Torque, RPM