8/2/2019 TOSHIBA TLP-S10

1/23

The most trusted, dependable name

in projector lamp sales.

http://www.myprojectorlamps.com

http://www.myprojectorlamps.ca

http://www.myprojectorlamps.eu

The following projector manual has not been modified or altered in any way.

http://www.myprojectorlamps.com/http://www.myprojectorlamps.com/http://www.myprojectorlamps.ca/http://www.myprojectorlamps.ca/http://www.myprojectorlamps.eu/http://www.myprojectorlamps.eu/http://www.myprojectorlamps.eu/http://www.myprojectorlamps.ca/http://www.myprojectorlamps.com/

8/2/2019 TOSHIBA TLP-S10

2/23

Others

Mainten

ance

Operat

ions

Preparations

BeforeUsing

OWNERS MANUAL

3LCD DATA PROJECTOR

TLP-S10 (SVGA)

8/2/2019 TOSHIBA TLP-S10

3/23

8/2/2019 TOSHIBA TLP-S10

4/23

8/2/2019 TOSHIBA TLP-S10

5/23

6

IMPORTANT SAFETY INSTRUCTIONS (Continued)

16. Damage Requiring ServiceUnplug this product from the walloutlet and refer servicing toqualified service personnel underthe following conditions:

a) When the power-supply cord orplug is damaged.

b) If liquid has been spilled, or

objects have fallen into theproduct.c) If the product has been exposed to

rain or water.d) If the product does not operate

normally by following the operatinginstructions. Adjust only thosecontrols that are covered by theoperating instructions as animproper adjustment of othercontrols may result in damage andwill often require extensive work bya qualified technician to restorethe product to its normal

operation.e) If the product has been dropped or

damaged in any way.f) When the product exhibits a

distinct change in performance -this indicates a need for service.

17. If glass components,including lens and lamp,should break, contact yourdealer for repair service.This product incorporates glass

components, including a lens anda lamp. If such parts shouldbreak, please handle with care toavoid injury and contact yourdealer for repair service. Thebroken pieces of glass may causeto injury. In the unlikely event ofthe lamp rupturing, thoroughlyclean the area around theprojector and discard any edibleitems placed in that area.

18. ServicingDo not attempt to service thisproduct yourself as opening orremoving covers may expose youto dangerous voltage or otherhazards. Refer all servicing toqualified service personnel.

19. Replacement PartsWhen replacement parts arerequired, be sure the servicetechnician has used replacementparts specified by themanufacturer or have the samecharacteristics as the original part.

Unauthorized substitutions mayresult in fire, electric shock, orother hazards.(Replacement of the lamp onlyshould be made by users.)

20. Safety CheckUpon completion of any service orrepairs to this product, ask theservice technician to performsafety checks to determine thatthe product is in proper operatingcondition.

21. Do not leave thermal-paper documents or edeformed items on topthe unit or near the airexhaust for long perioof time.The heat from the unit could

the information on the thermpaper, or cause deformation warping.

8/2/2019 TOSHIBA TLP-S10

6/23

8

LABEL LOCATIONS

MANUFACTURED;

SERIALNO.

WARNING LabelCAUTION Label

MODEL NO. /RATING Label

SERIAL NO. Label

WARNING Label

CAUTION Label

If your line voltage is 220 to 240V, u

Plugconfiguration Plug type Line

EURO

UK

220

220

Use a 5A fuse which is approved by or BSI to BSI362.Always replace the fuse cover afterchanging the fuse.

IMPORTANT PRE

Save Original Packing MaterialsThe original shipping carton and pa

ship your LCD projector. For maximpacked at the factory.

Moisture CondensatioNever operate this unit immediatelyWhen the unit is exposed to such a the crucial internal parts. To preventat least 2 hours when there is an ex

Place and Manner of In Do not place in hot locations, such

malfunction, and shorten the life of Avoid locations with oil or cigarette

optical parts, shortening their lives, Do not place slantwise in angle of 2lamp.

Using this instrument near a TV or sound. If this happens, move it awa

Moving the projector from a low-temcause condensation on the lens or it in that situation, the malfunction mnaturally disappears.

In a high altitude location where airuse it with the ambient temperature

POWER SUPPLY

8/2/2019 TOSHIBA TLP-S10

7/23

8/2/2019 TOSHIBA TLP-S10

8/23

8/2/2019 TOSHIBA TLP-S10

9/23

8/2/2019 TOSHIBA TLP-S10

10/23

8/2/2019 TOSHIBA TLP-S10

11/23

8/2/2019 TOSHIBA TLP-S10

12/23

8/2/2019 TOSHIBA TLP-S10

13/23

8/2/2019 TOSHIBA TLP-S10

14/23

8/2/2019 TOSHIBA TLP-S10

15/23

8/2/2019 TOSHIBA TLP-S10

16/23

8/2/2019 TOSHIBA TLP-S10

17/23

8/2/2019 TOSHIBA TLP-S10

18/23

8/2/2019 TOSHIBA TLP-S10

19/23

8/2/2019 TOSHIBA TLP-S10

20/23

8/2/2019 TOSHIBA TLP-S10

21/23

8/2/2019 TOSHIBA TLP-S10

22/23

40

I CONTROL terminal

G Pin assignment

768

5

4

3

2 1

Signal Name

RXD

CTS

DSR

GND

RTSN.C

TXD

N.C

Pin No.

1

2

3

4

56

7

8

Description

Receiving data

Consent to send

Data set ready

Signal ground

Request to sendNo connection

Sending data

No connectionMini DIN 8 pin connector

G Interface format1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;

Stop Bit Length: 1 bit

2 Communication format STX (02h) Command (3Byte) ETX (03h)

Only 1 command valid per communication.

3 Data format For input commands, only ASCII-compliant all-uppercasealphanumeric characters supported.

4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended

ACK (06h) ESC (1Bh) ... Aborted

No acknowledge NAK (15h)

If commands are to be sent consecutively, wait for the response from the projectorbefore sending the next command.

G Main Commands

Note

Contact your dealer for control cable and other commands.

I Separately Sold ProductReplacement Lamp Model TLPLV3

Note

Design, specifications, etc. subject to change without notice for improvements, etc.

Item Command

Power on PON

Power off POFIcon display on MO0

Icon display off MO1

Auto setting (RGB input) PAT

Status display on DONStatus display off DOF

Specifications (Continued)

Item Command

Computer input select IN1

Y/PB/PR input select IN2Video input select IN3

S-video input select IN4

8/2/2019 TOSHIBA TLP-S10

23/23