touchscreen technology comparison - esterline technologies corporation

2
Technology Capacitive Systems SAW Infrared Resistive Resistive Projected Surface 4/5/8 wire Capacitive electric eld thru material(s) Capacitive electric eld on material surface Surface acoustic waves Light interrup- tion Analog Digital Input Method Finger, gloved finger, conductive stylus Finger, conductive stylus Finger, gloved finger, or soft tip stylus Finger, gloved finger, or stylus pen Finger, gloved finger, or stylus pen Finger, gloved finger or stylus pen Activation Sensitivity Programmable Non- customizable Non- customizable N/A Non- customizable Mechanically tuned Non- customizable Mechanically tuned Activation Pressure N/A N/A N/A N/A Mechanically tuned Mechanically tuned Use with Gloves Yes No Yes Yes Yes Yes Sensor Substrate Types Thick glass - some plastics possible with choices depending on use & interactions Typically soda lime glass Glass only Any substrate of no substrate picture frame Typical polyester film Glass Typical polyester film Glass Gestures (Single touch to drag & drop, pinch/zoom) Yes Limited Yes Yes Yes - dual touch uses special controller Yes requires constant pressure Multi-touch Yes No No Yes Limited Yes Stable Calibration Required at set up Yes required periodically Yes required periodically None required Yes required periodically Required at set up Touchscreen Technology Comparison Featuring Advanced Input, Memtron, and LRE Medical Products Best Good Neutral Poor Worst

Upload: others

Post on 03-Feb-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Touchscreen Technology Comparison - Esterline Technologies Corporation

Technology

Capacitive SystemsSAW Infrared

ResistiveResistive

Projected Surface 4/5/8 wireCapacitive

electric fi eld thru material(s)

Capacitive electric fi eld on material surface

Surface acoustic waves

Light interrup-tion

Analog Digital

Input Method Finger, gloved fi nger, conductive stylus

Finger, conductive stylus

Finger, gloved fi nger, or soft tip stylus

Finger, gloved fi nger, or stylus pen

Finger, gloved fi nger, or stylus pen

Finger, gloved fi nger or stylus pen

ActivationSensitivity

Programmable Non-customizable

Non-customizable

N/A Non-customizableMechanicallytuned

Non-customizableMechanicallytuned

Activation Pressure

N/A N/A N/A N/A Mechanicallytuned

Mechanically tuned

Use with Gloves Yes No Yes Yes Yes Yes

Sensor Substrate Types

Thick glass - some plastics possible with choices depending on use & interactions

Typically soda lime glass

Glass only Any substrate of no substrate picture frame

Typical polyester fi lm

Glass

Typical polyester fi lm

Glass

Gestures(Single touch to drag & drop, pinch/zoom)

Yes Limited Yes Yes Yes - dual touch uses special controller

Yes requires constant pressure

Multi-touch Yes No No Yes Limited Yes

StableCalibration

Required at set up

Yes required periodically

Yes required periodically

None required

Yes required periodically

Required at set up

TouchscreenTechnology Comparison

Feat

urin

g A

dva

nced

Inp

ut,

Mem

tro

n, a

nd L

RE

Med

ical

Pro

duc

ts

Best Good Neutral Poor Worst

Page 2: Touchscreen Technology Comparison - Esterline Technologies Corporation

Americas Headquarters600 W. Wilbur AvenueCouer d’Alene, ID 83815208-765-8000

530 N. Franklin StreetFrankenmuth, MI 48734989-652-2656

Europe

Hofer Straße 5D-86720 Nördlingen, Germany+49 (0) 9081-800-1

Asia Caoheijing High Tech Park6th Floor, Block 87No. 1199 Quin Zhou Bei RoadShanghai, China

[email protected]/interfacetechnologies

Technology

Capacitive SystemsSAW Infrared

ResistiveResistive

Projected Surface 4/5/8 wireCapacitive

electric fi eld thru material(s)

Capacitive electric fi eld on material surface

Surface acoustic waves

Light interruption Analog Digital

Surface Hardness

High, more than 9H

Medium, varies on any protective coating

High, more than 9H

High, more than 9HCan be picture frame

Typical Low, only 3H

Glass

Typical Low to medium

Glass

Durability/ Longevity

High, solid-state technology protected thru thin or thick rigid substrates; highly shock/impact resistant

Medium, solid-state design through thin rigid substrates; medium level of shock and impact resistance

Low, highly susceptible to stress or wear in mechanical construction over time

High Low, easily damaged by foreign objects and / or harsh cleaners. Highly subject to wear under heavy use

Low, easily damaged by foreign objects and / or harsh cleaners. Highly subject to wear under heavy use

Surface or Environmental Contaminants

Best units immune to water, moisture and other contaminants or chemical cleaners; wide temperature range

Does not work when wet or moist

Adversely affected by moisture, surface contaminants and changes in temperature

Potential for false actuation or dead zones from surface contaminants

Typical construction easily scratched and degrades with UV exposure; varying performance at different temperatures

Glass

Typical construction easily scratched and degrades with UV exposure; varying performance at different temperatures Glass

Transmissivity Optics

Very good >92%

Very good >92%

Very good >92%

No distortion 100%

Distortion due to coatings <82%

Distortion due to coatings <82%

Ease of Integration

Complex Simple - front surface sensitive to metal

Complex Simple -requires bezel integration

Simple Simple

Compliance(EMC, ESD, etc).

Needs a good compliance strategy

Needs a good compliance strategy

SizeRecommendation

2” to12” with ITO up to 100+” with micro fi ne wires

6.4” to 32” Good for all sizes if this high-end technology required

8” to 150” Good for 6.4”, 8.4”, and 10.4”. Very good for 12.1” and higher

Good for 6.4”, 8.4”, and 10.4”. Very good for 12.1” and higher

Cost:Touch Panel

High Moderate Moderate Moderate Low Low

Cost:Touch Controller

High High Moderate Moderate Low Low

Feat

urin

g A

dva

nced

Inp

ut,

Mem

tro

n, a

nd L

RE

Med

ical

Pro

duc

ts

© Copyright 2011 Esterline Corporation. All rights reserved. Trademarks and trade names are property of their representative owners. Right reserved to make changes to products and services described herein without prior notice. Revision B.01 2011-10