Rental • Sales • Service • Parts 800.232.4100 www.allcrane.com | www.allaerials.com | www.altsales.com | www.craneparts.com

Tower Cranes from 4 - 35 UStALL’s TOWER CRANE DIVISION is headquartered in Richfield, Ohio (just a few miles south of Cleveland) and supports the entire ALL Family of Companies.

The fleet of roughly 100 towers includes small mobile self-erecting towers, traditional hammerhead towers, flat top towers, and luffing jib towers. The equipment ranges from 98 feet to 262 feet of jib, with capacities from 4 tons to 35 tons from major manufacturers Peiner and Potain.

ALL Tower has a registered professional engineer on staff, greatly enhancing our capabilities to the customer, including lift planning.

ALL’s operation also includes shipping the crane to the site on our own trailers, erection of the towers, and when the job is complete, disassembly and removal. Experienced tower operators are also part of our complete service model.

FREESTANDING HAMMERHEAD TOWERSManufacturer Model Tonnage Tower Jib

Manitowoc/Potain MD610 25 274' 262'

Terex/Peiner SK 575 35 232' 262'

Manitowoc/Potain MD 485B 22 247' 262'

Terex/Peiner SK 415-20 22 214' 246'

Manitowoc/Potain MDT 412-20 22 223' 246'

Manitowoc/Potain MDT 368 17 245' 246'

Terex/Peiner SK 315 17 253' 229'

Manitowoc/Potain MDT 178 8 220' 196'

FREESTANDING LUFFING TOWERSManufacturer Model Tonnage Tower Jib

Manitowoc/Potain MR 608 35 205' 197'

Manitowoc/Potain MR 418 26 220' 197'

SELF-ERECT PORTABLE TOWER CRANESManufacturer Model Tonnage Tower Jib

Manitowoc/Potain T85A 6 125' 148'Manitowoc/Potain IGO 50 4 76' 131'Terex/Comedil CBR 40H-4 4 74' 131'Terex/Comedil CBR 36H-4 4 66' 118'

Potain MR 415 (26 TON)

2017

0314

Hammerheads

• Large availability of machines and accessories

• High freestanding hook heights

• Moves load level because of its horizontal jib

• Relatively easy to erect, climb, and dismantle

• Works best in unencumbered swing areas

Topless

• Works well with multiple tower cranes on the same site

• Minimizes overall height

• Fewer parts, erects faster

Luffers• Can work in tight sites surrounded by existing

buildings• Can work well with multiple tower cranes on the

same site• Can work in sites that have “air rights” issues• Works best in congested conditions

Self Erecting• Works well on short-term projects• Sets up and works well in congested areas• Erects fast and can be relocated on site• Transports easily with minimal number of trucks

Terex / Peiner SK 575 (35 TON)

ADVANTAGES OF TOWERS BY TYPE