Available NATIONWIDE Hire Desk: 0870 240 2381 TPA Product Profile

This system has been designed to enable road rail vehicles and equipment to mount or cross the rail quickly and safely.

An example installation video overview can be viewed at;

www.tpa-rrap.co.uk

Network Rail Approved, Universal Track Access System, ideal for renewals sites.TPA is firmly established in the rail sector as “the” principle provider of safe, effective, value for money temporary roadways, walkways & access systems.

The Universal Track Access System (UTAS) is the latest addition to TPA’s range of portable access equipment. With its custom-ary rapid installation time, this new RRV rail track access system shall provide a superb all round solution to the on and off track-ing of road rail vehicles.

The BenefitsThe Universal Track Access System or UTAS is designed to enable rubber tyred & tracked road rail machines to get on and off track safely and provides the following benefits;

1. Avoid damage to equipment including the rail head2. 50 tonne load bearing3. Total rail head protection4. Network Rail Approved - Certificate No. PA05/03902

The ProcessThis system has been designed to enable road rail vehicles and equipment to mount or cross the rail quickly and safely.

There is now no excuse for accidents caused by sliding off old wooden sleepers or for damaging the troughing.Ra

pid

Ra

il A

cce

ss

© 2014 TPA Portable Roadways LimitedAll Rights reserved

Specifications are subject to change without noticeTrademarks are the property of TPA Portable Roadways Limited or their respective owners.

RISQS / Link-up Achilles RegisteredSupplier Number 058540

Document Issue date 28/05/15Document Version 1.6

W: www.tpa-rrap.co.uk T: 0870 240 2381 E: rrap@tpa-ltd.co.uk

RRAP TPA Rapid Rail Access System

InnovativeGrouser traction lugs on all sections.

Recessed lifting hook chain points at centres of gravity.

ProtectiveProvides total rail head protection.

Can be utilised to on/off and cross track most types of rail road plant.

QuickNo tools are required for installation or removal, both done in minutes.

UTAS Specifications HighlightsDimensions• Standard ramp sections are 4 metres in length• Flat manoevering deck area is approximately 4m x 2.3m• Total track access system area when deployed is approximately 5m x 3m

Weight• Ramp sections are no heavier than approximately 1.0 tonne per item

Stillage Weight• Stillage with UTAS: 2,450kg• Stillage empty: 350kg

System Parts• The full ramp kit consists of 2 outer ramp sections and 1 inner deck sec tion with 2 centre end ramps

Load Bearing Capacity• 50 tonne load• Tracked machines up to 50 tonnes• Rail axle loads up to 20 tonnes• Road vehicle axle weights up to 20 tonnes with a minimum chassis ground clearance of 300mm

Installation Time• Full ramp kit, inclusive of the 3 sections can be fully installed and ready for use in less than 20 minutes.• Deployed in just 3 lifts by an excavator/crane with lifting chains.

Note• The UTAS RRAP is not approved to be used on the Bull Head Track style of rail line, due to the clearance and “chairs” in which the rail sits.