tr-99-04 - skb.com · technical report tr-99-04 issn 1404-0344 cm gruppen ab, bromma, 1999...
TRANSCRIPT
-
Technical Report
TR-99-04
ISSN 1404-0344CM Gruppen AB, Bromma, 1999
Evaluation of modelling of the TRUE-1 radially converging and dipole tests with conservative tracers
The Äspö Task Force on Modelling of Groundwater Flow and Transport of Solutes
Tasks 4C and 4D
Mark Elert
Kemakta Konsult AB
May 1999
Evalu
ation
of m
od
elling
of th
e TRU
E-1 rad
ially con
vergin
g an
d d
ipo
le tests with
con
servative tracersTR
-99-04
Svensk Kärnbränslehantering ABSwedish Nuclear Fueland Waste Management CoBox 5864SE-102 40 Stockholm Sweden Tel 08-459 84 00 +46 8 459 84 00Fax 08-661 57 19 +46 8 661 57 19
-
Technical Report
TR-99-04
ISSN 1404-0344CM Gruppen AB, Bromma, 1999
Evaluation of modelling of the TRUE-1 radially converging and dipole tests with conservative tracers
The Äspö Task Force on Modelling of Groundwater Flow and Transport of Solutes
Tasks 4C and 4D
Mark Elert
Kemakta Konsult AB
May 1999
Evalu
ation
of m
od
elling
of th
e TRU
E-1 rad
ially con
vergin
g an
d d
ipo
le tests with
con
servative tracersTR
-99-04
Svensk Kärnbränslehantering ABSwedish Nuclear Fueland Waste Management CoBox 5864SE-102 40 Stockholm Sweden Tel 08-459 84 00 +46 8 459 84 00Fax 08-661 57 19 +46 8 661 57 19
AbstractExecutive SummaryContentsList of FiguresList of Tables1 Introduction2 Purpose and set up of experiments2.1 Description of settings2.2 Radially converging tracer tests (Task 4C)2.2.1 Obectives2.2.2 Definition and set up2.2.3 Data base
2.3 Dipole tracer tests (Task 4D)2.3.1 Objectives2.3.2 Definition and set up2.3.3 Data base
3 Modelling approaches3.1 General approaches for modelling of groundwater flow and transport in fractured rock3.2 Approaches applied by the modelling teams3.2.1 Introduction3.2.2 CRIEPI3.2.3 PNC/Golder3.2.4 SKB/KTH-ChE3.2.5 Posiva/VTT3.2.6 BMB/BGR3.2.7 SKB/KTH-TRUE3.2.8 ANDRA/CEA-DMT3.2.9 AEA Technology
4 Results4.1 Modelling results4.2 Experimental result4.2.1 Radially converging tracer test (RC-1)4.2.2 Dipole tracer tests (DP 1 - DP 4)
4.3 Comparison of results4.3.1 Performance measures4.3.2 Radially converging test4.3.3 Dipole tests
5 Discussin5.1 Model geometry and structural model5.2 Modelling of processes5.3 Material properties5.4 Boundary conditions5.5 Model calibration and conditioning5.6 Sensitivity analysis5.7 Lessons learned - Unresolved issues
6 Conclusions6.1 Tasks 4C and 4D as a testing exercise6.2 Modelling and data6.3 Perspective to future tasks
7 AcknowledgementsReferencesAppendix 1 Data distributedAppendix 2 Executive summaryAppendix 3 Questionnair