trade products and services catalogue...trade products and services catalogue effective as of 1st...

* Note: All prices are subject to 10% GST

SALES ENQUIRIES: [email protected]

GENERAL SALES/ESTIMATING:

(Site Weld Co-ordinator)

RYAN MINOGUE

[email protected]

PROJECTS ADMINISTRATOR:

(Tender Processing)

SHANE STEPHENSON

[email protected]

SPECIAL PROJECTS EXECUTIVE:

(Site measure and project management)

BRETT SMITH

[email protected]

LIGHT METALWORKS MANAGER:

(Balustrades, screens, mono stringers, etc)

ROB DEANS

[email protected]

LIGHT METALWORK ESTIMATOR / PROJECT MANAGER: GLENN HITCHCOCK

[email protected]

SENIOR STRUCTURAL ESTIMATOR: GARY DARCY

[email protected]

OPERATIONS MANAGER / INSTALLATION MANAGER: WAYNE BUCHANAN

[email protected]

ACCOUNTS RECEIVABLE:

(& Metalworks scheduling)

SHARON GOOD

[email protected]

ACCOUNTS PAYABLE & HR OFFICER: SONIA ELLMERS

[email protected]

PROCUREMENT OFFICER: ROD RAWDING

[email protected]

CONTRACTS ADMINISTRATOR: RACHEL ALCORN

[email protected]

PRODUCTION OFFICER / DESPATCH OFFICE: CLINT or LUKE

[email protected]

TRADE PRODUCTS AND SERVICES CATALOGUE

Effective as of 1st March, 2013

Supersedes 21st edition dated 01/01/11

mailto:[email protected]













Please note: All prices listed herein are subject to change without notice.

All prices are subject to 10% GST

1

22

nd

ed

itio

n

IND

ICA

TIV

E

THE COLUMN FABRICATION DESIGNS BELOW ARE INDICATIVE ONLY, ALL VARIATIONS

ARE AVAILABLE IN EITHER A DURAGAL OR HOT DIP GALVANISED FINISH.

PLEASE NOTE: : column fabrication rates are inclusive of plates both ends, where applicable.

: metre rates listed are inclusive of cutting charges and waste factors

: various other S.H.S. sizes are available - priced on application.

COLUMNS { Duragal } Duragal not available on sizes greater than 100mm sq

Price

Per Mtr

SHS

Duragal

when

available

Standard col.

fabrication

Corner

upstand

fabrication

Basic cast in

col.

fabrication

Basic one end

only col.

fabrication

Special col.

fabrication

P.O.A. P.O.A. P.O.A. P.O.A. P.O.A.

P.O.A. 40x40x2.0

P.O.A. 50x50x3.0

P.O.A. 50x50x4.0

P.O.A. 50x50x5.0

P.O.A. 65x65x3.0

P.O.A. 65x65x4.0

P.O.A. 65x65x5.0

P.O.A. 65x65x6.0

P.O.A. 75x75x2.5

P.O.A. 75x75x3.0

P.O.A. 75x75x4.0

P.O.A. 75x75x5.0

P.O.A. 75x75x6.0

P.O.A. 89x89x3.5

P.O.A. 89x89x5.0

P.O.A. 89x89x6.0

P.O.A. 100x100x4.0

P.O.A. 100x100x5.0

P.O.A. 100x100x6.0

P.O.A. 75x50x3.0

P.O.A. 100x50x4.0

P.O.A. 125x125x4.0

P.O.A. 150x150x5.0

P.O.A. 200x200x5.0



2

22

nd e

ditio

n

22

nd

editio

n

IND

ICA

TIV

E

THE COLUMN FABRICATION DESIGNS BELOW ARE INDICATIVE ONLY, ALL VARIATIONS

ARE AVAILABLE IN EITHER A DURAGAL OR HOT DIP GALVANISED FINISH.

PLEASE NOTE: : column fabrication rates are inclusive of plates both ends, where applicable.

: metre rates listed are inclusive of cutting charges and waste factors

: various other S.H.S. sizes are available - priced on application.

COLUMNS { Hot Dip Galvanized }

Price

Per Mtr

HDG

SHS

Standard col.

fabrication

Corner

upstand

fabrication

Basic cast in

col.

fabrication

Basic one end

only col.

fabrication

Special col.

fabrication

P.O.A. P.O.A. P.O.A. P.O.A. P.O.A.

P.O.A. 40x40x2.0

P.O.A. 50x50x3.0

P.O.A. 50x50x4.0

P.O.A. 50x50x5.0

P.O.A. 65x65x3.0

P.O.A. 65x65x4.0

P.O.A. 65x65x5.0

P.O.A. 65x65x6.0

P.O.A. 75x75x2.5

P.O.A. 75x75x3.0

P.O.A. 75x75x4.0

P.O.A. 75x75x5.0

P.O.A. 75x75x6.0

P.O.A. 89x89x3.5

P.O.A. 89x89x5.0

P.O.A. 89x89x6.0

P.O.A. 100x100x4.0

P.O.A. 100x100x5.0

P.O.A. 100x100x6.0

P.O.A. 75x50x3.0

P.O.A. 100x50x4.0

P.O.A. 125x125x4.0

P.O.A. 150x150x5.0

P.O.A. 200x200x5.0



3

22

nd

ed

itio

n

EXTRAS TO COLUMNS

Holes through SHS or RHS P.O.A

Std. Midspan Fixing Cleats P.O.A

Large Midspan Fixing Cleats P.O.A

Small Handrail Tags P.O.A

Extra over for mouse hole cut outs P.O.A

Adjustable Post Bracket

(Threaded rod style)

SHS material rates all as per pages 1 or 2

Column Fabrication – Complete Assembly Duragal H.D.Galv

Adjustable post bracket c/w standard top plate P.O.A P.O.A

Adjustable post bracket c/w corner upstand top P.O.A P.O.A

Price Per Item: to suit duragal posts (base assembly only) P.O.A

Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A

Adjustable Post Bracket

(SHS sleeve stub style)

SHS material rates all as per pages 1 or 2

Available for 50sq, 75sq & 100sq SHS only

Column Fabrication – Complete Assembly Duragal H.D.Galv

Adjustable post bracket c/w standard top plate P.O.A P.O.A Adjustable post bracket c/w corner upstand top P.O.A P.O.A

Price Per Item: to suit duragal posts (base assembly only) P.O.A

Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A

Adjustable Head Bracket

(SHS material sold separately – see rates on pages 1 + 2)

Available for 75sq, 89sq + 100 sq SHS

Column Fabrication – Complete Assembly Duragal H.D. Galv

Adjustable Head bracket c/w standard Base Plate P.O.A. P.O.A.

Head Bracket – Sold Loose for Site Welding P.O.A. P.O.A. Head Bracket – Shop welded to SHS Post P.O.A. P.O.A.



4

22

nd e

ditio

n

22

nd

editio

n

# ALL PRICES LISTED BELOW INCLUDE ELECTRIC

WIRE BRUSH AND ONE COAT OF R.O.Z.P. PRIMER.

(PLEASE NOTE: RATES LISTED HAVE TAKEN CUTTINGS AND OFFCUTS INTO ACCOUNT).

UNIVERSAL BEAMS

SIZES Kgs PER METRE $ PER MTR

INCLUDING NAIL

PLATE HOLES

$ PER MTR

EXCLUDING HOLES

150 UB 14 14.0 P.O.A. P.O.A.

150 UB 18 18.0 P.O.A. P.O.A.

180 UB 16 16.1 P.O.A. P.O.A.

180 UB 18 18.1 P.O.A. P.O.A.

180 UB 22 22.2 P.O.A. P.O.A.

200 UB 18 18.2 P.O.A. P.O.A.

200 UB 22 22.3 P.O.A. P.O.A.

200 UB 25 25.4 P.O.A. P.O.A.

200 UB 30 29.8 P.O.A. P.O.A.

250 UB 26 25.7 P.O.A. P.O.A.

250 UB 31 31.4 P.O.A. P.O.A.

250 UB 37 37.3 P.O.A. P.O.A.

310 UB 32 32.0 P.O.A. P.O.A.

310 UB 40 40.4 P.O.A. P.O.A.

310 UB 46 46.2 P.O.A. P.O.A.

360 UB 45 44.7 P.O.A. P.O.A.

360 UB 51 50.7 P.O.A. P.O.A.

360 UB 57 56.7 P.O.A. P.O.A.

410 UB 54 53.7 P.O.A. P.O.A.

410 UB 60 59.7 P.O.A. P.O.A.

460 UB 67 67.1 P.O.A. P.O.A.

460 UB 75 74.6 P.O.A. P.O.A.

460 UB 82 82.1 P.O.A. P.O.A.

530 UB 82 82.0 P.O.A. P.O.A.

530 UB 92 92.4 P.O.A. P.O.A.

610 UB 101 101.0 P.O.A. P.O.A.

610 UB 113 113.0 P.O.A. P.O.A.

610 UB 125 125.0 P.O.A. P.O.A.

# FOR EXTRAS TO ABOVE BEAMS, PLEASE REFER TO PAGE 6

#For mill finish only refer retail cost book



5

22

nd

ed

itio

n

# ALL PRICES LISTED BELOW INCLUDE ELECTRIC

WIRE BRUSH AND ONE COAT OF R.O.Z.P. PRIMER.

(PLEASE NOTE: RATES LISTED HAVE TAKEN CUTTINGS AND OFFCUTS INTO ACCOUNT).

UNIVERSAL COLUMNS


INCLUDING NAIL

PLATE HOLES

$ PER MTR

EXCLUDING

HOLES

100 UC 15 14.8 P.O.A. P.O.A.

150 UC 23 23.4 P.O.A. P.O.A.

150 UC 30 30.0 P.O.A. P.O.A.

150 UC 37 37.2 P.O.A. P.O.A.

200 UC 46 46.2 P.O.A. P.O.A.

200 UC 52 52.2 P.O.A. P.O.A.

200 UC 59 59.5 P.O.A. P.O.A.

250 UC 73 72.9 P.O.A. P.O.A.

250 UC 89 89.5 P.O.A. P.O.A.

310 UC 97 96.8 P.O.A. P.O.A.

310 UC 118 118 P.O.A. P.O.A.

310 UC 137 137 P.O.A. P.O.A.

310 UC 158 158 P.O.A. P.O.A.

PARALLEL FLANGE CHANNEL (PFC BEAMS)


INCLUDING NAIL

PLATE HOLES

$ PER MTR

EXCLUDING

HOLES

75 x 40 6.65 P.O.A. P.O.A.

100 x 50 9.34 P.O.A. P.O.A.

125 x 65 13.42 P.O.A. P.O.A.

150 x 75 17.70 P.O.A. P.O.A.

180 x 75 20.90 P.O.A. P.O.A.

200 x 75 22.90 P.O.A. P.O.A.

230 x 75 25.10 P.O.A. P.O.A.

250 x 90 35.50 P.O.A. P.O.A.

300 x 90 40.10 P.O.A. P.O.A.

380 x 100 55.20 P.O.A. P.O.A.

#For mill finish only refer retail cost book



6

22

nd e

ditio

n

22

nd

editio

n

LINTELS STITCH WELDED TO U-BEAMS & CHANNELS

Kgs PER METRE ($) Primed HDG

100 x 100 x 10 Angle Lintel 14.2 P.O.A. P.O.A.




200 x 10 Flat Lintel 16.1 P.O.A. P.O.A.

EXTRAS TO U-BEAMS & CHANNELS

ITEM ($), VALUE

PLATED SPLAY CUTS TO CHANNELS P.O.A.

PLATED SPLAY CUTS TO U-BEAMS P.O.A.

NOTCHED ENDS P.O.A.

TWO HOLE END PLATES TO CHANNELS P.O.A.

FOUR HOLE END PLATES TO U-BEAMS P.O.A.

STANDARD CONNECTION PLATES P.O.A.

X-LARGE CONNECTION PLATES P.O.A.

STIFFENER PLATES P.O.A.

PURLIN CLEATS P.O.A.

M12 x 45 BOLT, NUT & WASHER Z/P (GR8.8) P.O.A.



COMPUTER GENERATED CAD DESIGN FEE P.O.A.

HOT DIP GALVANIZING STANDARD SERVICE P.O.A.

HOT DIP GALVANISING OF LESS THAN 20 KG P.O.A.

HOT DIP GALVANIZING SILVER BULLET SERVICE P.O.A.

STITCH WELD ANGLE LINTEL TO PFC (HIT 50 MISS 200) P.O.A.

SHOP WELD PFC PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) P.O.A.

SHOP WELD PFC PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) P.O.A.

SHOP WELD U-B PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) P.O.A.

SHOP WELD U-B PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) P.O.A.



7

22

nd

ed

itio

n

STAIR STRINGERS (Std. Rise 170mmx250mm Going)

100x50 RHS Stringers c/w 250mm leg

Gross Weight

Pre-Gal H.D.Galv

1/Pair of 1 tread (3mm BMT) 0.010 P.O.A. P.O.A.

















EXTRAS TO STRINGERS Price per Pair

Fixing Plates to Base P.O.A.

Fixing Plates on return to landing P.O.A.

CAD Detailing to Special Requirements P.O.A.

Special Rise – Hand Built out of jig P.O.A.



8

22

nd e

ditio

n

22

nd

editio

n

INGAL TEE BEAMS (Suitable for Double Skin Brickwork)

Ingal Tee Beam Metre $ each per unit

200 x 8 + 200 x 6 “T” 2700 P.O.A.

200 x 8 + 200 x 6 “T” 3000 P.O.A.

200 x 8 + 200 x 6 “T” 3300 P.O.A.

200 x 8 + 200 x 6 “T” 3600 P.O.A.

200 x 8 + 200 x 6 “T” 3900 P.O.A.

Ingal Longspan Tee beam Metre $ each per unit

250 x 10 + 200 x 6 “T” 4200 P.O.A.

250 x 10 + 200 x 6 “T” 4500 P.O.A.

250 x 10 + 200 x 6 “T” 4800 P.O.A.

250 x 10 + 200 x 6 “T” 5100 P.O.A.

250 x 10 + 200 x 6 “T” 5200 P.O.A.

250 x 10 + 200 x 6 “T” 5400 P.O.A.

250 x 10 + 200 x 6 “T” 5700 P.O.A.

250 x 10 + 200 x 6 “T” 6000 P.O.A.

Note: A Tee beam cutting charge of P.O.A. would be applied if specific dimensions are required.



9

22

nd

ed

itio

n

FABRICATED BRICK LINTELS Primed

$ per metre

Hot Dip Galvanized

$ per metre

100 x 100 x 10 M.S. Angle P.O.A. P.O.A.




150 x 100 x 10 M.S. Angle

c/w 90 x 8 FMS Vertical Flange Extension

P.O.A. P.O.A.

Fixing Holes to Above P.O.A. P.O.A.

BRICK LINTELS { Arch Bars }

FLAT METRE ($), each per UNIT

85 x 7 .900 P.O.A.

85 x 7 1.000 P.O.A.

85 x 7 1.200 P.O.A.

ANGLE METRE ($), each per UNIT

100 x 100 .900 P.O.A.

100 x 100 1.200 P.O.A.

100 x 100 1.500 P.O.A.

100 x 100 1.800 P.O.A.

100 x 100 2.100 P.O.A.

100 x 100 2.400 P.O.A.

100 x 100 2.700 P.O.A.

150 x 100 2.100 P.O.A.

150 x 100 2.400 P.O.A.

150 x 100 2.700 P.O.A.

150 x 100 3.000 P.O.A.

150 x 100 3.300 P.O.A.

150 x 100 3.600 P.O.A.

150 x 100 4.000 P.O.A.

Note: A Galintel cutting charge of P.O.A. would be applied if specific dimensions are required.



10

22

nd e

ditio

n

22

nd

editio

n

CROSS BRACING

DESCRIPTION SUPPLY ONLY WITH

CLEATS TO ENDS

FOR BOLTED

CONNECTION

SUPPLIED AND SITE WELDED

“FIRST BAY”

INCL. TRAVEL

ADDITIONAL

BAYS

25x25x2 pre-gal SHS

incl. waste factor

P.O.A. P.O.A. P.O.A.

16mm round M.S.

primed incl. waste factor


16mm round M.S.

primed c/w turnbuckles


16mm round M.S. galv.

c/w turnbuckles


16mm round M.S.

primed c/w tension ring


16mm round M.S. galv

c/w tension ring


DELIVERY CHARGES {From 1kg to 3 tonnes }

LOCATION

BRISBANE - Redland District P.O.A.

BRISBANE - Other Suburbs P.O.A.

SOUTH COAST - To Tweed Heads P.O.A.

KINGSCLIFFE/POTTSVILLE P.O.A.

BYRON / BALLINA P.O.A.

NORTH COAST - To Noosa P.O.A.

IPSWICH To Toowoomba P.O.A.

REGIONAL TOWNS – Gladstone, Chinchilla etc P.O.A.



11

22

nd

ed

itio

n

Indicative Pricing for:

INSTALLATION OF STRUCTURAL STEEL TO RESIDENTIAL HOUSING

Half Day Rate Maximum of 3 Beams and 5 Columns P.O.A.

(Includes 2 man team plus Franna Crane & driver) Extra Over for Slew Crane (up to 30 Ton) P.O.A. Extra Man for Half Day P.O.A. Full Day Rate

Maximum of 6 Beams and 9 Columns P.O.A. (Includes 2 man team plus Franna Crane & driver)

Extra Over for Slew Crane (up to 30 Ton) P.O.A. Extra Man for Full Day P.O.A. Network Steel installation services are offered on the understanding that the following basic requirements are provided.

Scaffolding and edge protection by head contractor.

No allowance for set out, positioning or grouting of cast in bolts.

Good clean access required in and around site for cranes, trucks, personnel and access equipment.

Head Contractor to provide grid lines and datum levels sufficient for a set out to proceed.

U.N.O removal or reinstatement of existing materials is excluded.

Unless stated all site work to be carried out during standard hours of 7:00am to 4:30pm Monday to Friday

Road closures and/or protection to power lines by head contractor.

ON-SITE CUTTING & WELDING

TRADESMAN P.O.A. TRADES ASSISTANT P.O.A. GENERATOR WELDER P.O.A. NOTE: MINIMUM CHARGE IN REDLANDS > 45 mins P.O.A. NOTE: MINIMUM CHARGE IN BRISBANE METRO > 45 mins P.O.A. NOTE: MINIMUM CHARGE, OUTER AREAS > 45 mins

(i.e. Caboolture/Pine Rivers/Ipswich/Beaudesert)

P.O.A.

NOTE: MINIMUM CHARGE GOLD COAST > 45 mins P.O.A. NOTE: MINIMUM CHARGE SUNSHINE COAST > 45 mins P.O.A. ONSITE CUT + CAP COLUMNS (incl. std vert. upstand bkt) P.O.A.

# FOR EXTENDED HOURS ON SITE, SPECIAL RATES CAN BE NEGOTIATED



12

22

nd e

ditio

n

22

nd

editio

n

FRAME HARDWARE

(see photo gallery pages 13 & 14)

ITEM NO. DESCRIPTION QTY SELL PRICE EX GST Post Support Brackets

GUS90450 Post Support Bracket 90x450 U shape w/bar each P.O.A. GUS90600 Post Support Bracket 90x600 U shape w/bar each P.O.A. GUS100450 Post Support Bracket 100x450 U shape w/bar each P.O.A. GUS100600 Post Support Bracket 100x600 U shape w/bar each P.O.A. GUS125600LD Post Support Bracket 125x600 U shape w/bar each P.O.A. GUS150600LD Post Support Bracket 150x600 U shape w/bar each P.O.A. GRSTB90200 Post Support Bracket 90x200 T blade on rod each P.O.A. GRSTB90300 Post Support Bracket 90x300 T blade on rod each P.O.A. GB090 Post Support Bracket 90xTradesman U type each P.O.A. GB0100 Post Support Bracket 100xTradesman U type each P.O.A. GFT400506 Post Support Bracket 50x6x400 Fish Tail each P.O.A. NET200UB130W Post Support Bracket Ex U beam suit post > 150sq each P.O.A. NET200UB180W Post Support Bracket Ex U beam suit post > 200sq each P.O.A. NET250UB130W Post Support Bracket Ex U beam suit post > 150sq each P.O.A. NET250UB180W Post Support Bracket Ex U beam suit post > 200sq each P.O.A. NET310UB130W Post Support Bracket Ex U beam suit post > 150sq each P.O.A. NET310UB180W Post Support Bracket Ex U beam suit post > 200sq each P.O.A. NET130W33Ø300H Post Support Bracket 130 T blade on pipe each P.O.A. NET130W33Ø600H Post Support Bracket 130 T blade on pipe each P.O.A. NETPBS200 Post Blade Stirrup HDG x 200 long each P.O.A. NETPBS120 Post Blade Stirrup HDG x 120 Long each P.O.A. NETPBS50 Post Blade Stirrup HDG x 50 long each P.O.A. NETH/DUTY150W450H Post Support Bracket 150x450x10 T blade each P.O.A. NETH/DUTY150W750H Post Support Bracket 150x750x10 T blade each P.O.A. NET180CP (Column Stool) 10mm claw plate each P.O.A.

ASSORTED BRACKETS AND PLATES NET-SERV 40sq SHS servery bracket 400x600 each P.O.A. NET-DWF 65x8 FMS dwarf wall bracket 300x300 each P.O.A. NET-PERG 50x50 angle pergola bracket x 750 each P.O.A. NET-STEP 3mm pressed step tread bracket each P.O.A. NET-75 Col. Pl. 75x8 FMS column plate x 200 c/w 2-14 dia. each P.O.A. NET-100 Col. Pl. 100x8 FMS column plate x 225 c/w 2-14 dia. each P.O.A. NET-100EA 150 100X100X6 bracket x 150 long 4/14 dia each P.O.A. NET-100 EA 200 100x100x8 bracket x 200 long 4/14 dia. each P.O.A. NET-150EA 200 150x150x10 bracket x 200 long 4/14 dia. each P.O.A.



13

22

nd

ed

itio

n

FRAME HARDWARE

Post Support Brackets

‘U’ shaped with Centre Bar

GUS90450 (90sq Post)


GUS100450 (100sq Post


GUS125600LD(125sq Post

GUS150600LD(150sq Post)


‘T’ Blade on Rod

To suit Min 90sq Post

GRSTB90200

GRSTB90300


‘U’ Type Tradesman

GB090 (90sq Post)

GB0100 (100sq Post)

Post Support Bracket

50x6 Flat x 400 with Fish Tail

Cast into Core Filled Pier

GFT400506


Ex ‘U’ Beam to suit 150sq Posts

NET200UB130W

NET250UB130W

NET310UB130W


Ex ‘U’ Beam to suit 200sq Posts

NET200UB180W

NET250UB180W

NET310UB180W

Disclaimer: - Many of the designs depicted are not engineered, Network Steel Fabrications recommends that the

purchaser considers the application and consults their engineer where & when certification is warranted.



14

22

nd e

ditio

n

22

nd

editio

n

FRAME HARDWARE


130 Flat ‘T’ Blade on Ø33 Pipe

To Suit min 130sq Post

NET130W33Ø300H

NET130W33Ø600H

Post Blade Stirrup

‘T’ Blade on Tube with Rod

To Suit min. 130sq Post

NETPBS50

NETPBS200

NETPBS120


Heavy Duty 150w x 10mm Blade

To Suit min. 150sq Post

NETH/DUTY150W450H

NETH/DUTY150W750H

Column Stools

Cast in type with Ø10 Claws

To Suit Site Welded

Steel Posts

CLP1806S

CLP18010S

Servery Bracket

40sq SHS Duragal 400x600 legs

NET-SERV

Dwarf Wall Bracket

65x8Flat 300x300 Legs (Primed)

NET-DWF

Pergola Bracket

50x50Angle 750lg with M12 Rod

NET-PERG

Connection Brackets

Assorted Sizes

NET-100EA 150

NET-100EA 200

NET-150EA 200

Disclaimer: - Many of the designs depicted are not engineered, Network Steel Fabrications recommends that the

purchaser considers the application and consults their engineer where & when certification is warranted.



15

22

nd

ed

itio

n

BOLTS TO SUIT FRAME HARDWARE (sold as complete assemblies with bolt, nut and washer)

ITEM NO.

DESCRIPTION

QTY

SELL PRICE EX GST

Tru Bolts

G/TRU-B 12/100 Tru Bolt HDG 12/100 (Std Qty per pack 20 off) each P.O.A.

M12 Hex Head Bolt, Nut and Washer Assembly

OBM12/100 Hex Head B, N&W 12x100mm HDG (Std Qty per pack 100 off) each P.O.A.





M12 Cup Head Bolt, Nut and Washer Assembly

OCBM12/65 Cup Head B, N&W 12x65mm HDG (Std Qty per pack 150 off) each P.O.A.










Post Caps K50MSGBW Square Galvabond Caps 50x50 each P.O.A. K65MSGBW Square Galvabond Caps 65x65 each P.O.A. K75MSGBW Square Galvabond Caps 75x75 each P.O.A. K100MSGBW Square Galvabond Caps 100x100 each P.O.A.



16

22

nd e

ditio

n

22

nd

editio

n

MISSION: To uphold our reputation and act with integrity in the pursuit of remaining at the forefront of

our industry; To build strong relationships with our clients and be recognised for our reliability and professional attitude; To value the contribution of our employees and to create an environment where our team can use their individual strengths and experiences to provide innovative ideas in the construction of quality structural steel and metalwork products and services

BENEFITS of dealing with Network Steel Fabrications:

Specialists in “Custom Made” structural steel and metalworks

You have access to our reliable, long-term team members for one- on-one consultations to get the right advice using steel to create building solutions

Experience and industry knowledge to assure you that we understand your requirements

One stop shop – all of your structural steel and metalwork needs can be met by our “Comprehensive” range of products and services including all of your frame hardware requirements

Service standards have been set to a high level, a culture stressed throughout our company as critical to our success

Capacity – with a staff of 50 plus, running two shifts, enables us the ability to provide lead times second to none

Hands on management by 3 working directors ensure that customers are valued as the highest priority with responsibility for customer satisfaction at the forefront

Extensive service area with regular freight services ranging from Northern NSW, through Brisbane, onto the Sunshine Coast and out to Toowoomba

We take away the headaches with our extended services – site measuring, CAD detailing, site welding and co-ordinating of rigging where required

Realistic lead times determined upon order placement – on time, right product

HISTORY: The management of Network Steel Fabrications takes a great deal of pride in exceeding our customer’s expectations over and above industry performance.

Since our establishment in 1992 Network Steel Fabrications has grown from 3 working directors (Peter McConnell, Wayne Buchanan and Glenn Hitchcock) to a staff of 50 plus, this significant growth is testimony to our commitment to offer exceptional value for money through outstanding service to our clients.

Network Steel Fabrications continues to uphold a strong sense of responsibility to the community and industry alike, an indication of this commitment is reflected in our substantial investment into apprentice training assuring the industry of a healthy future.

Growth in our business is founded on the strong sense of responsibility to uphold a reputation that is dependent upon customer satisfaction.

PRODUCTS: Structural beams, columns, lintels, LSB, brackets, stair stringers, bracing, T-Beams, post supports, frame hardware, mild steel and aluminium awnings, window hoods, sunscreens, balustrades, gates and more all made to order

trade products and services catalogue...trade products and services catalogue effective as of 1st...

Documents