training calendar for siemens sinumerik cnc … 1 training calendar for siemens sinumerik cnc...

s

1

Training Calendar for Siemens Sinumerik CNC Systems and DrivesOctober 2013 – March 2014, Bangalore

Sl. No

Sinumerik / Simodrive / Sinamics / Simatic

CourseDuration of

Days

ScheduleCourse Fee

INR*+Service Tax

Start End Per Participant

01 802DSL Commissioning & Maintenance 530.09.2013 05.10.2013

12,000.00Holiday - 2nd Oct. Gandhi Jayanthi

02 810D-840D Commissioning & Maintenance 5 07.10.2013 11.10.2013 16,000.00

03 828D Maintenance Course 415.10.2013 18.10.2013

12,000.00Holiday -14th Oct Vijayadasami

04 810D-840D Maintenance Course 4 21.10.2013 24.10.2013 15,000.00

05 S7200-S7300 Basic Intergration With Sinumerik 528.10.2013 02.11.2013

16,000.00Holiday - 1st Nov. Kannada Rajostava

06 840DSL Maintenance Course 4 11.11.2013 14.11.2013 15,000.00

07 828D Commissioning 5 18.11.2013 22.11.2013 12,000.00


09 840DSL Commissioning 5 02.12.2013 06.12.2013 16,000.00

10 808D Commissioning & Maintenance 4 09.12.2013 12.12.2013 10,000.00

11 802DSL Commissioning & Maintenance 5 16.12.2013 20.12.2013 12,000.00

12 810D-840D Maintenance Course 430.12.2013 03.01.2014

15,000.00Holiday - 1st Jan’14 New Year

13 828D Maintenance Course 4 06.01.2014 09.01.2014 12,000.00


15 828D Commissioning 5 27.01.2014 31.01.2014 12,000.00



18 802DSL Commissioning & Maintenance 5 17.02.2014 21.02.2014 12,000.00

19 840DSL Commissioning 5 24.02.2014 28.02.2014 16,000.00

20 808D Commissioning & Maintenance 4 03.03.2014 06.03.2014 10,000.00

21 S7200-S7300 Basic Intergration With Sinumerik 5 10.03.2014 14.03.2014 16,000.00


23 810D-840D Commissioning & Maintenance 5 24.03.2014 28.03.2014 16,000.00

s

2

October 2013 – March 2014, Pune

Sl. No

Product Topic DurationSchedule Course Fees*

Start EndPer Participant

INR+Service Tax

1 Sinumerik 810 / 840 D Commissioning & Maintenance 5 21.10.13 24.10.13 15,000.00

2 Sinumerik 828D Commissioning & Maintenance 5 11.11.13 15.11.13 12,000.00


4 Sinumerik 810 / 840 D Commissioning & Maintenance 5 20.01.14 24.01.14 15,000.00



*Note: Minimum Booking should be 6 to 8 participants per each course.

• Please note that the course fee is exclusive of service tax, presently it is 12.36%.

• Any change in Tax Rate will be accordingly applied.

• The course contents are attached below for your reference

s

3

General Information:

Retention Clause: Siemens Ltd., obligation to fulfil this agreement is subject to the proviso that the fulfilment is not prevented by any impediments arising out of national and international foreign trade and customs requirements or any embargos[or other sanctions]”

Destination Control Clause: Goods labeled with “AL” not equal to “N” are subject to European or German export authorization when being exported out of the EU. Goods labeled with “ECCN” not equal to “N” are subject to US re-export authorization. Even without a label or with label “AL:N”, or “ECCN:N”, authorization may be required due to the final end use and destination for which the goods are to be used.

Reservation Clause: This Quotation is made subject to all necessary export licenses and other permission being obtained by the recipient, from the relevant authorities, for the destination & intended use of the goods and / or services.

“Siemens shall not be obligated to fulfill this agreement if such fulfillment is prevented by any impediments arising out of national or international foreign trade or customs requirements or any embargoes or other sanctions”.

Courses at Bangalore will be conducted at Competence Development Centre address as mentioned below

SIEMENS Ltd.

Competence Development Centre

2nd Floor, Jyoti Mahal,

No. 49, St. Marks Road,

Bangalore - 560001

Contact Person: Miss. Swetha

Phone : 080- 33422665

Email : [email protected]

Web: www.siemens.co.in/sitrain

The training courses at Pune will be conducted at Siemens- Esskay Training centre. The address and contact details are as mentioned below.

SIEMENS ESSKAY Training Centre

Plot no. BG / SEI, 11 / 1,

NEAR BHOSARI TELEPHONE EXCHANGE,

MIDC, BHOSARI, PUNE-411026

Contact: Mr. Mangesh

Phone: (020)32348536

E-mail: [email protected] / [email protected]

Note: For registration of seats for courses, kindly fill the registration form attached below (Page-5) and send to email: [email protected]

s

4

• Registration of seats for Training Courses can be made by fax or e-mail using the format, which is attached. Alternatively, your Order can be sent to our Training Centre by post / courier as above mentioned address :

• Kindly note that Rupee rates mentioned for our training programmes are applicable only for Indian nationals sponsored by Indian Companies. For foreign nationals or Indian nationals sponsored by foreign companies, rates will be quoted in EURO only. Kindly contact us for more details on the same.

• The course fee is to be paid in advance only on confirmation of seat. The course fee is to be paid by DD / Cheque in favour of Siemens Ltd. payable at Bangalore or you can also do RTGS / NEFT online transfer for details pls. contact us.

• The course fee includes course material, lunch, tea and excludes breakfast, accommodation, transport and also any other incidental charges

• Since there are limited seats in each programme. The seats are confirmed on First come first served basis.

• The normal Course timings are from 09:45 to 17:30Hrs with a one-hour lunch break between 13:00 and 14:00 Hrs. Any alteration in the venue or Course Timings will be intimated to the participants at least a week in advance.

• Every attempt will be made to conduct the courses as announced. However we reserve the right to postpone or cancel the courses due to inadequate booking or circumstances beyond our control. We shall do our best to send timely communication in such situations, if possible.

• For foreign nationals, rules laid down by Govt. of India are applicable. Please intimate us 4 weeks in advance.

• In the event of non-attendance, you will be invoiced for 80% of the applicable price per course, if a written cancellation is not received at least 7 calendar days prior to the start of the course.

s

5

Course Registration Form

To:

Siemens Ltd.

Jyoti Mahal, 2nd Floor,

49, St. Marks Road,

Bangalore – 560 001

Telephone No. : 080-33422665, 33422688

Mobile : +91 9611499399

Fax No. : 080 – 33422580

E-mail: [email protected]

Attn: Ms. Vidhya / Prakash / Sanjay

Course Selected at Bangalore ¨ Pune ¨

Please register seats as per the following details:

Company Name :

Address :

Tel.: Fax:

E-Mail:

Name(s) of Participants Course Name Course Fees Course Date

Total:

Payment: ¨ Cheque / DD No. dated

For amount enclosed / sent by courier on

¨ Any others (please specify)

Signatures:

Designation:

(Company seal) Date:

s

6

SINUMERIK 810D/840D Maintenance Course:

DAY 1

• Overview of Sinumerik controls • Doc on CD usage

• Drives-UE/IR explanation • System Overview 810D/840D and Drive components & Interfacing Terminal Description

• Terminals description & Interfacing • FDD/ MSD Explanation

DAY 2

• Protection Levels & Time and Date Settings in 810D and 840D • Language Settings & Data Transfer

• Software tools required for taking the Backups • Save Data Backup-Archives, Step7 backup, Restore Data Backup-Archives

• Saving the PLC Program with Step7 • External Data Backup And Restore

• Hard disk Backup (PCU50.3) • Exercise on taking the Ghost Backup

• Exercise on taking the backups

DAY 3

• Battery and Fan Exchange • LED Diagnosis-Drive-HMI-NC

• Software Versions, System Resources • Diagnosis of PLC Program & PLC Periphery

• Interpretation of Alarm Log • PLC Alarm Structure

• Drive Diagnostic Parameters • Editing Machine Parameters & Important machine data’s in Axis MD

• Install additional axis & Reference - Encoder Adjustment

DAY 4

• Review of Day 1 to Day3 information’s • Exercise on taking archive backups, Step7 backup, Ghost backup

• Fault finding exercise • Open session

s

7

SINUMERIK 810D/840D Commissioning & Maintenance Course:

DAY 1


• About CNC (Axis, Channel, Mode & Groups) • About all Siemens Systems old and new

• Motor compatible & brief description • HMI compatible & brief description

DAY 2

• Drives, UE/IR explanation • Terminals description & Interfacing

• FDD / MSD Explanation • System overview 810D/840D Drive components & Interfacing Terminal Description

• Overview – Operating Areas – Brief • Operating modes – Jog, MDI, Auto, Operating areas – Services

• Data In/Out on PG/PC Binary Format, Punch tape / text format • Data Backup & Restore on MMC / HMI

• Exercise – Data transfer using RS232

DAY 3

• Overview Interface Signal & explanation of required IS • Overview of machine data

• Commissioning and Sin 8x0DnMD and MCP Configuration • Exercise

• Data backup and restore on MMC • Exercise configuring the NC machine data

DAY 4

• Brief description on PLC S7300 & commands • Familiarization of Simatic manager

• (Data backup & restore, archive, retrieve) Diagnosis using Simatic manager • Exercise - enabling of CNC & Drives (S7300)

• Fault Finding Exercise – Data backup (Restore on MMC) • Configuring User alarms in HMI

DAY 5

• Ghost Backup on PCU50 and PCU50.3 • Exercise


s

8

SINUMERIK 802Dsl Maintenance & Commissioning:

DAY 1


• About CNC (Axis, Channel, Mode & Groups) • System overview of 802DSL

• Installation of Commissioning tools • Line Modules, Protection Levels

• RCS Data Transfer tool

DAY 2

• LED Diagnosis HMI-Drive • Pushbutton test (MCP), Profibus configuration

• MCPA signal test • Save Data Backup, Restore Data Backup

• External data backup and restore • Exercise: Data Backup, Restore

DAY 3

• Diagnose PLC program, PLC Alarm • Creating alarm texts

• Alarm structure • Diagnosis of Cycle alarms

• Editing of NC Machine data • Drive Diagnostic parameters

• Service Displays • Creating the PLC program & Loading a PLC program

• PLC Subroutine library

DAY 4

• Commissioning of Options & ISO Dialect commissioning • Start-up of NC parameters

• Display options • Preparation of series machines

• Reference - encoder adjustment • Install additional axis

• Optimization with Starter & Optimization with IBN tool • Interface signals, Machine data lists

• Fault detection, practical training for commissioning on training racks

DAY 5

• Review of Day 1 to Day 3 information’s • Exercise on taking archive backups and reloading


s

9

SIMATIC S7 200 & 300 Integration with Sinumerik controls Course:

DAY 1

• Overview of Sinumerik Controls • Overview of Simatic S7 Components S7-200 & S7-300

• Hardware Configuration • Installation of S7 Micro Win & Programming Tool 802

• Installation of S7 Software [Simatic Manager]

DAY 2

• Upgrade from S5 to S7 • Brief Description of Programming Blocks [OB,FB,FC,DB]

• Brief on Instruction Set • Exercise of Program Writing and Testing

• Online Status Checking & Debugging

DAY 3

• Brief on Instruction Set • Micro Win & Programming Tool 802

• Using Functions Calls [FC], Function Blocks [FB], Data Blocks [DB] • Brief on Configuring Profibus

• Exercise of Program Writing and Testing • Online Status Function Checking and Debugging

DAY 4

• Concept of Analog Modules • Brief Info on Input /Output Periphery & Special Modules

• Exercise of Program Writing and Testing • Brief Description on Integration with Sinumerik Controls

• Online Status Function Checking and Debugging

DAY 5

• Brief Description on Interfacing signals of CNC (802D/802DSL/810D/840D) • Exercise on Program Writing and Testing

• Open Session

s

10

SINUMERIK -828D Maintenance Course:

DAY 1

• Sinumerik 828D Overview • Service & Commissioning

• Menu Structure • Access Levels/Time & Date Settings

• Machine Data-Setting • RCS Commander

• Licensing of Options • Network Configurations

• Electronic LOG Book

DAY 2

• Data Management (Backup of NC-PLC backups, PLC backup through Programming tool 828)

• PPU Connections & Diagnostic • Line and Motor Module

• Axis and Drive Diagnostic • Profinet connections and Diagnostic

• Referencing Encoder Adjustment of prameters

DAY 3

• Basics of commissioning sequence • Basics of Creating PLC & Interface signals used Upload & Download

• PLC Alarm and Messages • PLC onboard diagnostics

DAY 4

• Review of Day 1 to Day 3 information’s

• Exercise on taking Backup/Restore of NC-PLC backups, PLC backup through Programming tool 828


s

11

SINUMERIK-828D Series -Commissioning:

DAY 1

• System Overview (24X, 26X, 28X) • Line & Motor Modules (Combi & S120)

• PPU Connections & Diagnostics • Tool Box Installation

• Time & Date Settings • Machine Control Panel

DAY 2

• Remote diagnosis (RCS) • License & Option Commissioning

• Machine and Setting Data • MCP & PP Module PN Configuration

• Data Management (Backup of NC-PLC backups, PLC backup through Programming tool 828)

DAY 3

• 828D Plc Instructions • PLC Interface

• Creating PLC Program • Commissioning sequence

• PI services and PLC Functions • PLC Alarm & Message structure

DAY 4

• Axis & Drive diagnostics • Referencing of Encoders

• Maintenance Planner • Easy Extend

• Easy Messenger • Servo Optimization

DAY 5

• Electronic Log book • Explanation of Euna & RSV procedure

• Electrical Cabinet Design • System Restore

• Tips & Tricks

s

12

SINUMERIK 840DSL Commissioning Course:

DAY 1

• System Overview • Line and Motor Modules

• Service & commissioning Tools • Menu Structure

• License & Option Management • PCU, TCU and OP Diagnostics and Interfaces

• NCU Diagnostics Displays and switches

DAY 2

• Machine and setting Data • DATA Management (Backup of NC-PLC backups, PLC backup through SIMATIC Step7)

• Machine control Panel Testing • Creating a PLC Program

• Basic PLC Function • Digital Inputs & Outputs

DAY 3

• Commissioning Sequence • Referencing Encoder Adjustment & Parameters

• Alarm Structure • PLC Alarms & Messages - Basic

• PLC Onboard Diagnostics

DAY 4

• Axis & Drive Diagnostics • Auto Optimization

• Starter Explanation • NX Module Configuration

• Adding / Removing Module from configuration

DAY 5

• Ghost Backup on and PCU50.3 • Exercise on Commissioning the NC and PLC


s

13

SINUMERIK 840DSL Maintenance Course:

DAY 1

• System Overview • Line and Motor Modules

• Service & commissioning Tools • Menu Structure

• License & Option Management • PCU, TCU and OP Diagnostics and Interfaces

• NCU Diagnostics Displays and switches

DAY 2

• DATA Management (Backup & restore of NC-PLC backups, PLC backup through SIMATIC Step7)

• Ghost Backup on PCU50.3 • Machine control Panel Testing

• Basic of Creating PLC Upload & Download • Digital Inputs & Outputs

DAY 3

• Basic’s Commissioning Sequence • Referencing Encoder Adjustment & Parameters

• Alarm Structure • PLC Alarms & Messages - Basic

• PLC Onboard Diagnostics • Axis & Drive Diagnostics

• Adding / Removing Module from configuration

DAY 4

• Review of Day 1 to Day 3 information’s • Exercise on taking Backup/Restore of NC-PLC backups, PLC backup through SIMATIC Step7)


s

14

SINUMERIK 808D Commissioning & Maintenance Course:

DAY 1

• System Overview of 808D • Overview of individual hardware connected in 808D

• Switching on and preparing for commissioning • Commissioning diagram

• Default PLC applications • Commissioning the prototype

• Other frequently used functions

DAY 2

• Overview SINAMICS V60 and V20 drive connected to 808 • Interface definition

• Signal sequence example • Commissioning of V60

• Main menu, Function menu • Setpoints from NC

• First commissioning • System commissioning

• Parameter list

DAY 3

• Operating in the “SYSTEM” area in 808D • Data backup

• 808D Service Guide • V60 and V20 LED Status Indicators

• Errors during the self test- other faults

DAY 4

• Review of Day 1 to Day3 information’s • Fault finding exercise

• Exercise on taking Backup/Restore of NC-PLC backups, • Open session

PLC backup through Programming tool 808

s

15

Guide for planning your stay in Bangalore

This is only for your easy refernce. Siemens does not take / own any liability for any data below this sheet. This info is given to help training participants for booking hotels in advance. Hotel charges will be settled directly by participants.

Hotels Near by Siemens training center.

Hotel St. Marks INN#35, St. Marks Road, Bangalore - 560001Tel: +91-80-41122783Email: [email protected]

9 MARKSINN #9, St Marks Road Bangalore - 560001 Tel: 91-80-2211-2888 / 2211-2889 / 2211-2889 Fax : +91-80-2211-2890 E-mail : [email protected] Website : www.9marksinn.com

Nahar Heritage Hotel 14, St. Mark’s Road Bangalore, Karnataka - 560001 Phone: 080 22278731Email: [email protected]

Hotel NandhiniNo.72, St. Marks Road, Bangalore - 560001Tel: 4126 6666, 4123 3333, Fax:412 1456Email:[email protected]

Hotel T.A.P Silver Square#185, Deenas,3rd floor, Brigade Road, Next to 5th Avenue, Opp. McDonald’s Bangalore - 560001Tel: 080-25595656 / 57 Email:[email protected]

Hotel Ajantha22A, MG Road, Bangalore - 560001Tel: 080-5584321

Craig Park - Green Homesno - 21 / 6, ground & first floor, Craig Park layout, M.G. Road, behind Nalli silks, Bangalore - 560001Tel: +91 (080) 2532 5524

The Compact Guest Houses, for reservations contact Ph: 080-41150505 Fax: 080-41150231 E-mail: [email protected]

s

16

St. Mark's Hotel St. Mark's Road Tel: 4001 9000 Fax: 2227 5700

The Monarch Brigade Road Tel: 2532 7191 Fax: 2532 7199

Museum Inn Museum Road Tel: 4111 3335 Fax: 5111 3300

The Richmond Hotel Richmond Road Tel: 2223 3666 Fax: 2223 377

Ashraya International Infantry Road. Tel: 2226 1921 Fax: 2226 3982

Hotel Maurya Race Course Road Tel: 2225 4111-119 Fax: 2225 6685

Compact Guest House Domlur Layout Tel: 2535 3881 / 41150505

Highgates Hotel Church Street Tel: 4022299 Fax: 2559 7799

Hotel Algate Residency Road Tel: 2559 4786 / 87 / 88 / 89, 2559 6965 / 66

Hotel Rama Lavelle Road Tel: 2227 3311-14, 2227 3381-84

Hotel Shangrila Brigade Road Tel: 2558 8994 / 41121621 Fax: 2558 2984

Hotel Vellara Brigade Road Tel: 2536 9116, 2536 9205, 2536 9775, 2536 5684

Ivory Tower MG Road Tel: 2558 9333 / 2558 5164 / 4178 3333 Fax: 2558 8697

Vintage Residency Mission Road Tel: 2227 4509 / 10 / 98450-14862

Safina Hotel Infantry Road Tel: 2558 1982-89 Fax: 2558 1990

The Basil Sampige Road Tel: 233 15123, 40402323 Fax: 2334 3904

Sukh Sagar Hotel Gandhinagar Tel: 222 02255 / 222 02256 Fax: 222 5673

Service Apartments

Arahna Homes: #148, 2nd Cross, Domlur II Stage, Indira Nagar, Bangalore 560071.

D’Habitat Serviced Apartments: No.485, 6th ‘D’ Cross, 6th Block, Koramangala, Bangalore - 560 095. Tel.: +91 80 4150 1950

Coporate Suites: Prestige St John’s Wood Apartments, Tavarekere Main Road, Koramangala, Bangalore- 560 095. Mobile: +91-98452 83949

Guesthouse Bangalore & Bungalow Bangalore

HomeStead: Lavella Road. Phone: 2212-0966 / 67 / 68

Lavelle Inn: Lavelle Mansion, Lavelle Road. Phone: 5112-0187, 5112-0203, 2221-1033

Melange: 21, Vittal Mallya Road. Phone: 2212 9700-3

The Abode: No. 14, Cornwell Cross Road, Langford Gardens, Bangalore - 560 025. Mob: +91-9844028126 Fax : +91 80 5124 0891

The Executive Inn: #510, 15th Cross, 15th “C” Main HSR Layout IV Sector, Bangalore 560 034. Phone: +91-80-57723175

s

17

Route Map from Majestic Railway Station to St’ Marks Road

From Majestic bus stand (Platform No.17) to Richmond Circle stop. Bus No.317, 316, 315, 304, 305, 308 etc

s

18

Roadmap from Richmond circle to Siemens Office

RoadMapfromChanceryBusstoptoSiemensOffice@JyothiMahal

s

19

Route Map from Bangalore Airport to St’ Marks Road

Volvo Bus Service from Airport (Bus frequency every half an hour) is the bus no BIAS-7

BIAS-7 Start from Airport – Get Down at Richmond Circle Stop opposite to Chancery Pavilion Hotel. From here it is Just walk able distance.

Private Cab Services from Airport

Private Cab service Help / Booking Counters are available at Airport.

Private Cabs:

Meru Cabs : 080-4422 4422

Easy Cabs : 080-4343 4343

Prepaid Cab from Karnataka Tourism : 080-4346 4346

training calendar for siemens sinumerik cnc … 1 training calendar for siemens sinumerik cnc...

Documents