training ver7.1 autofix autoalign - mltech.co.uk autofix autoalign description autoalign allows the...
TRANSCRIPT
![Page 1: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/1.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 1
AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points will be determined as a separate exercise. Briefly this means, survey an object and determine best-fit centrelines, etc. At the same time survey reference points (REF-???). Orientate this file to the required orientation, plane and global location. This can now be called the design file for the object. A similar design file has been created and loaded for the following example. (Load design (as-built monitoring) file). The example bellow also uses a control file. The reason for this is that data is only sent to the AutoAlign routine if “Orientated Co-ords” are available. Therefore a previously established co-ordinate system referenced by control points is also required. Note: Because the term Design File is used primarily for pipework surveys and has a format Design ????.des this can be confusing when a file with the format Survey ????.sur is called a design file, as in this case. A survey file containing REF points and orientated to a global location is commonly known as a design file. For simple monitoring of the before/after condition the procedure would be as follows. Create the control point network; use the Auto Orientate Routine if required to orientate the control. Create the design file as above. The continuous survey of REF points will display the change in position.
![Page 2: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/2.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 2
Mouse controls for zoom and rotate of AutoAlign routine.
![Page 3: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/3.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 3
![Page 4: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/4.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 4
![Page 5: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/5.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 5
![Page 6: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/6.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 6
![Page 7: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/7.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 7
![Page 8: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/8.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 8
![Page 9: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/9.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 9
![Page 10: Training Ver7.1 AutoFix AutoAlign - mltech.co.uk AutoFix AutoAlign Description AutoAlign allows the monitoring of REF points. The design file depicting the position of the REF points](https://reader036.vdocuments.net/reader036/viewer/2022081408/605aff99a5d9053ce06a87d9/html5/thumbnails/10.jpg)
Training: AutoFix AutoAlign
Copyright © Mike Lloyd Technical Services Ltd. 1998~2009 Updated 02/11/09 Page 10