traitement des copeaux et environnement arp machine environnement
DESCRIPTION
ARP-Chip Pumping Stations 1TRANSCRIPT
2
Chip Pumping Station SP 250
Drives and Performance
Throughput Up to 250 litres / min
Pump Screw-type centrifugal pump 1,5 kW
Fitting for pump 2“
Raker Drive Spur wheel back-geared motor 0,15 kW; 57 rpm
Dimensions and Weights
Overall external dimensions L x W x H 1096 x 1096 x 302 mm
Inner tank Ø x H 1020 x 270 mm
Maximum capacity of inner tank 200 l
Feed height without cutting unit- Feed opening length x width
At least 300 mmVariable up to a maximum of 500 x 500 mm
Feed height with ZW 400 At least 702 mm + hopper (variable)
Feed height with EZ 4 recessed At least 312 mm + Trichter (variable)
Feed fl ange DN 100
No. of rakers 4
Net weight Approx. 300 Kg
Other Information
Cutting units on carriage ZW 300, ZW 400, EZ 4
Integrable cutting units ZW 300
Level measurement „Pump On-Off“ With ultrasonic sensor
Level measurement „WHG-Overfull“ With fl uid level limit switch
3
Chip Pumping Station SP 500
Drives and Performance
Throughput Up to 500 litres / min
Pump Screw-type centrifugal pump 4,0 kW
Fitting for pump 2“
Raker Drive Spur wheel back-geared motor 0,15 kW; 57 rpm
Dimensions and Weights
Overall external dimensions L x W x H 1436 x 1531 x 301 mm
Inner tank Ø x H 1020 x 270 mm
Maximum capacity of inner tank 350 l
Feed height without cutting unit- Feed opening length x width
At least 300 mmVariable up to a maximum of 500 x 500 mm
Feed height with ZW 400 At least 702 mm + hopper (variable)
Feed height with EZ 4 recessed At least 312 mm + Trichter (variable)
Feed fl ange DN 100
No. of rakers 4
Net weight Approx. 450 Kg
Other Information
Cutting units on carriage ZW 300, ZW 400, EZ 4
Integrable cutting units ZW 300, ZW 400, EZ 4
Level measurement „Pump On-Off“ With ultrasonic sensor
Level measurement „WHG-Overfull“ With fl uid level limit switch
4
Chip Pumping Station SP 1000
Drives and Performance
Throughput Up to 1000 litres / min
Pump Screw-type centrifugal pump 5,5 kW
Fitting for pump 3“
Raker Drive Spur wheel back-geared motor 0,15 kW; 57 rpm
Dimensions and Weights
Overall external dimensions L x W x H 1440 x 1440 x 625 mm
Inner tank Ø x H 1346 x 545 mm
Maximum capacity of inner tank 750 l
Feed height without cutting unit- Feed opening length x width
At least 650 mmVariable up to a maximum of 500 x 500 mm
Feed height with ZW 400 At least 1000 mm + hopper (variable)
Feed height with EZ 4 recessed At least 650 mm + Trichter (variable)
Feed fl ange 300 x 300 mm
No. of rakers 4
Net weight Approx. 600 Kg
Other Information
Cutting units on carriage ZW 300, ZW 400, EZ 4
Integrable cutting units ZW 300, ZW 400, EZ 4
Level measurement „Pump On-Off“ With ultrasonic sensor
Level measurement „WHG-Overfull“ With fl uid level limit switch
5
Chip Pumping Station SPF 500
Drives and Performance
Throughput Up to 500 litres / min
Pump Screw-type centrifugal pump 1,5 kW
Screw conveyor Screw gear motor 0,25 kW; 4,2 rpm
Dimensions and Weights
Overall external dimensions L x W x H 1850 x 840 x 900 mm
External dimensions of tank LxWxH 1360 x 800 x 560 mm
Maximum capacity with cutting unit 350 l
Feed height with ZW 400-Feed opening ZW 400 w. cutter cov. L x W
At least 650 mmMax. 330 x 400 mm
Feed fl ange DN 125
Diameter of screw conveyor 185 mm
Weight without cutting unit Approx. 250 Kg
Other Information
Integrable cutting units EZ 4 , ZW 300, ZW 400
Level measurement „Pump On-Off“ With ultrasonic sensor
Level measurement „WHG-Overfull“ With fl uid level limit switch
6
Chip Pumping Station SPF 1000
Drives and Performance
Throughput Up to 1000 litres / min
Pump Screw-type centrifugal pump 5,5 kW
Screw conveyor Screw gear motor 0,25 kW; 4,2 rpm
Dimensions and Weights
Overall external dimensions L x W x H 2200 x 1050 x 1175 mm
External dimensions of tank LxWxH 1600 x 1000 x 800 mm
Maximum capacity with cutting unit 700 l
Feed height with EZ 4-Feed opening EZ 4, L x W
At least 800 mmMax. 330 x 320 mm
Diameter of screw conveyor 185 mm
Weight without cutting unit Approx. 450 Kg
Other Information
Integrable cutting units EZ 4 , ZW 300, ZW 400
Level measurement „Pump On-Off“ With ultrasonic sensor
Level measurement „WHG-Overfull“ With fl uid level limit switch
7
Chip Pumping Station SPFEZ
Drives and Performance
Throughput Up to 250 litres / min
Pump Screw-type centrifugal pump 1,5 kW
Screw conveyor Screw gear motor 0,12 kW; 9,6 rpm
Scraper conveyor Screw gear motor 0,18 kW; 4,3 rpm
Cutting unit EZ 4 Bevel gear motor 2,2 kW; 18 rpm
* Dependent on the tank size, pipe length, pump head feed, etc.
Dimensions and Weights
Overall external dimensions L x W x H Variable x 1510 x 1185 mm
External dimensions of tank LxWxH Variable x max. 600 x min. 250 mm
Feed height Min. 250 mm
Feed opening length - width L: Variable W: up to a maximum of 500 mm
Diameter of screw conveyor 90 mm
Weight Dependent on the length and width
Other Information
Integrable cutting units EZ 4
Level measurement „Pump On-Off“ With ultrasonic sensor
Level measurement „WHG-Overfull“ With fl uid level limit switch
8
ARP GmbH & Co. KGD - 72275 Alpirsbach-PeterzellDistribution en France :MACHINE ENVIRONNEMENTTél : 04 70 96 01 33 Fax : 04 70 96 16 98
www.machine-environnement.com
Extract from our reference list:
AAG Austria Alu-Guß Ges. m.b.H
Adam Opel AG
Airbus Deutschland GmbH
Alutec Metallwaren GmbH & Co.
Audi AG
BBS Kraftfahrzeugtechnik AG
BMW AG
Borbet
Bosch Rexroth - Brüninghaus
Car Image Co. Ltd
Daimler Chrysler AG
Gero GmbH
General Motors
Handtmann GmbH & Co.KG
IBT GmbH
IMS Gear Automotive
Konzelmann GmbH
Kronprinz Aluguß GmbH
Lupold Hydrotechnik GmbH
MTU Friedrichshafen GmbH
Rhode & Schwarz
Ronal
Sihn
SRF
VW AG
Weiss
Weisser St. Georgen
ZF AG