transfer defence force licences to national civil wh&s licences

Defence Forces Licences to National WH&S Licences

Industry Leaders Health. Safety. Training.

Transfers from Defence Forces Licenesto WH&S LicencesInformation Package

Necessary Documentation

Transition Tables

Lodgement of Forms July 01 2008

Enrolment Form

Checklist

Intro

Part.1

Part.2

Part.3

Part.4

> 1300 647 200

Competency and Proficiency

�


Necessary Documentation

Intro

ll applications from persons applying for credit transfers must be accompanied by:

• 100 point identity check/proof documentation supporting the clients’ competencies for their Earthmoving and Particular Crane &/or Licence to Perform High Risk work. This evidence must consist of:

Defence Force qualifications:

a) Original or copies of the operator’s Licence issued by the Defence Force, certified by a Justice of the Peace, Commissioner for Declarations or a staff member from OHSA.

2. Assessment

To determine equivalence, reference should be made to the Translation Tables. Any qualification/s that fall outside the scope of the Translation Tables can be referred to OHSA for assessment/refusal.

For an example of how to use the Translation Tables for Defence Force Licences see examples provided.

3. Principal Inspector (Licensing) Endorsement

After all information has been received and a recommendation has been made by OHSA regarding the application for credit transfer, the application and supporting documentation will be scanned and emailed, attention to the Principal Inspector (Licensing) for final approval.

The Principal Inspector will make a determination as to the accuracy of the assessment process and advise OHSA via return email within 10 working days.

If you have questions or issues you would like to raise regarding the Translation Tables you should email your questions/concerns and any supporting documentation to [email protected] attention to the Training Manager for action.

4. Applicant Not Eligible

When an applicant is found to be ineligible for a credit transfer, OHSA will communicate this decision to the person applying for a credit transfer.

5. Credit Transfer for Earthmoving and Particular Crane (EPC) licence class

Where an applicant has been deemed eligible to hold a particular certificate for an EPC licence class/es, a ‘G’ form (form 36) and Earthmoving and Particular Crane form (EPC Assessment Summary) will be completed.

OHSA will complete sections A, B C & D of the Earthmoving and Particular Crane form (EPC Assessment Summary) and sections 1, 2, 3, 6 & 7 of the ‘G’ form (form 36).

The applicant will complete section E of the Earthmoving and Particular Crane form (EPC Assessment Summary) and sections 4 & 5 of the ‘G’ form (form 36).

Once completed, the forms and the prescribed fee will be forwarded to Workplace Health and Safety Queensland (WHSQ) by OHSA for processing.

6. Credit Transfer for High Risk Work Licence (HRWL) class

Where the applicant has demonstrated eligibility to hold a HRWL, OHSA will complete sections A, B, C & D of a HRWL assessment summary and issue a statement of attainment.

These documents will be given to the applicant. The applicant must complete section E of the HRWL assessment summary and take the documentation to an Australia Post outlet, with the prescribed fee & a passport size photo for submission.

> www.ohsa.com.au


�


Transition TablesTransition Tables

Part 1

LICENCE CODE

WHSQTRANSLATION DESCRIPTION OF EQUIPMENT

LZ LZ Operator of a Dozer

LE LE Operator of an Excavator having an engine capacity of more than 2 litres

LL LL Operator of an Front-end Loader having an engine capacity of more than 2 litres

LB LB Operator of an Front-end Loader/Backhoe having an engine capacity of more than 2 litres

LG LG Operator of a Grader

LR LR Operator of a Road Roller having an engine capacity of more than 2 litres

LS LS Operator of a Skid Steer Loader having an engine capacity of more than 2 litres

LP LP Operator of a Scraper

C9 NIL Operator of a Dump Truck & Dumpers (those classified as C vehicles)

C10 NIL Operator of a Truck Mounted Ditching & Trenching Machines

C11 NIL Operator of a Bitumen Distributor

C12 NIL Operator of Paving Machines

C13 NIL Operator of Stabilising Equipment

C14 NIL Operator of a Truck Mounted Earth Auger

C15 NIL Operator of Quarrying Equipment

C16 NIL Reserved

C17 NIL Operator of a Tractor Agricultural (multi-purpose) & nominated attachments

C18 NIL Operator of Towed Compaction Equipment.

C19 NIL Reserved

C20 NIL Reserved

C VEHICLE LICENCE CODES

In Recognition of Qualifications and/or Experience Obtained in the Armed Services

Royal Australian Army, Navy or Air Force APRIL 2000

1. Codes. Listed above are the C vehicle licence certificates

2. Vehicle model endorsements - the model of the machine on which the operator has been trained is to be placed in brackets after the cog, EG LL (LX120); LB (CASE 580E, CAT 933); LZ (CAT 933. TD15C); LG (CAT 130G); C14 (Proline)

3.Class limitation endorsements – for special requirements when a licence is issued in respect to only one class of vehicle within a range of classes covered by a particular licence code, this

> 1300 647 200


�


Transition Tables

Part 1

LICENCE CODE


DG DG Dogger

RB RB Rigger Basic

RI RI Rigger Intermediate

RA RA Rigger Advanced

CT CT Operator of a Tower Crane

CD CD Operator of a Derrick Crane

PB PB Operator of a Portal Boom Crane

CB CB Operator of a Bridge or Gantry Crane (other than operation by a remote conrol having not more than 3 powered operations)

CV CV Operator of a Vehicle Loading Crane with a capacity of 10 tonnes or more

CN CN Operator of a Non-Slewing Mobile Crane with a capacity of more than 3 tonnes

C2 C2 Operator of a Slewing Crane with a capacity of 20 tonnes or less



CO CO Operator of a Slewing Crane with a capacity of 100 tonnes or more

HP HP Operator of a Materials Hoist with Cantilever Platform

HM HM Operator of a Materials or Personnel Hoist

WP WP Operator of a Boom-Type Elevating Work Platform with a boom length of 11 metres or more

PB PB Operator of a Mobile Truck Mounted Concrete Placing Boom with a knuckle boom capable of power operated slewing and luffing.

LBG LBG Operator of a Bridge or Gantry Crane - If a load more than 5 tonne is being lifted by remote control with no more than 3 powered operations

LF LF Operator of a Forklift Truck (other than a pedestrian operated Forklift Truck)

LO LO Operator of an Order Picking Forklift Truck.

D VEHICLE LICENCE CODES

1. Codes. Listed above are the D vehicle licence certificates

2. Vehicle model endorsements - the model of the machine on which the operator has been trained is to be placed in brackets after the cog, eg. LF (CASE W36). For Cranes, the type and load capacity of the crane is to be indicated, eg C2 (Tadanao AR200M 20 tonne). For elevated work platforms, the type and maximum height of the elevated work platform is to be indicated, eg WP (Davelco 11m).

> www.ohsa.com.au


�


Part 1

(AFD) National Defence Force Licence (Commenced on 1 July 1997)

CODE OR EQUIPMENT ENDORWHSQ

TRANSLATIONLICENCE

CODEDEFENCE

QUALIFIERDESCRIPTION OF EQUIPMENT

Fork Lift Operator O LF - - Fork Lift Operator

Forklift A/C Maint. O LF - - Forklift A/C Maint.

Forklift Explosives O LF - - Forklift Explosives

Forklift A/C Loading 80t A LF - - Forklift A/C Loading 80t

Forklift A/C Loading 2.5t A LF - - Forklift A/C Loading 2.5t

Forklift Rough Terrain O LF - - Forklift Rough Terrain

Forklift All Terrain O LF - - Forklift All Terrain

Tractor Loader Backhoe S LZ - - Tractor Loader Backhoe

Tractor Loader Backhoe + S LL, LB - - Tractor Loader Backhoe +

Dozer Tracked S LZ - - Dozer Tracked

Grader Wheeled S LP - - Grader Wheeled

Skid Steer Loader S LS - - Skid Steer Loader

Crane Rough Terrain 15t 4x4 K C2 - - Crane Rough Terrain 15t 4x4

Crane Half Slew 4.5t 4x2 K CN - - Crane Half Slew 4.5t 4x2

Crane Tractor Mounted 4.5t 4x2 K C2 - - Crane Tractor Mounted 4.5t 4x2

Crane Tractor Mounted 4.5t 4x4

K CN - - Crane Tractor Mounted 4.5t 4x4

TRANSITION TABLES FOR ARMED SERVICES QUALIFICATIONS

Verification of loadshifting equipment used in crane mode or mobile crane certificate


> 1300 647 200


�


Part 1

Transition Tables

TRANSITION TABLES FOR ARMED SERVICES QUALIFICATIONS

EQUIPMENT FROM ADF LICENCE (COMMENCED ON 01 JULY 1997)

ARMY

CODERAAF

CODENAVY CODE

ADF CODE

WHSQ TRANSLATION

DESCRIPTION OF EQUIPMENT

D1, D2, D3 (D)FLOP - O LF Fork Lift Operator

(L3)VEK - O LF Forklift A/C Maint.

(L1)VDK - O LF Forklift Explosives

(D)VEJ - A LF Forklift A/C Loading 80t

(D)VEK - A LF Forklift A/C Loading 2.5t

D9, D10, D11 (D)VEL - O LF Forklift Rough Terrain

D9, D10, D11 (D)VEM - O LF Forklift All Terrain

C1 (C)VLF - S LZ Tractor Loader Backhoe

C1 (C)VLF - S LL,LB Tractor Loader Backhoe +

C3 (C)VLO - S LZ Dozer Tracked

C4 (C)VLP - S LP Grader Wheeled

C16 (C)VLS - S LS Skid Steer Loader

C9, C10, C11 (D)VXB - K C2 Crane Rough Terrain 15t 4x4

(D)VXD - K CN Crane Half Slew 4.5t 4x2

(D)VEX - K C2 Crane Tractor Mounted 4.5t 4x2

(D)VXF - K CN Crane Tractor Mounted 4.5t 4x4

Verification of loadshifting equipment used in crane mode or mobile crane certificate

> www.ohsa.com.au


�



Part 1

There are no equivalent certificates for Army codes A, B, F, G, M, P, Q, R, T.Required: Original or verified copy of Army C and D code operators licence;Original or verified copy of course report; andCompleted application for RPL and prescribed fee.NB:It should be noted that most “course reports” have “not competent” to sling loads with excavator or backhoe” endorsed in the report column.

Applicant must produce evidence of being authorised by the Army to operate C1 or C3 or C7 or C7A to hoist loads with slings or be the holder of a crane operators certificate for these certificates to be issued.

LICENCE CODE


C1 LB, LL Tractors, Front end loader/ backhoe See Below

C2 LP Self propelled Scraper

C3 LZ Tracked Tractors, including backhoes

C3 LB Tracked Tractors, including backhoes See Below

C4 LG Self-propelled Grader

C5 C2 (Reserved) Self-propelled crane up to 10t

C5A C2 OR C6 Self-propelled crane over to 10t See Below

C5B CB, LBG Gantry cranes

C6 - Tractor fitted with crane attachments

C7 LE Hydraulic excavator + See Below

C7A LE Cable operated excavator + See Below

C8 LR Self -propelled compaction equipment

C16 LS Skid steer loader

Verification of loadshifting equipment used in crane mode or mobile crane certificate. Verification of crane 60 tonne or over required for C6 to be issued

D CODEWHSQ

TRANSLATION ARMY EQUIPMENT NOTES

D1 LF On-pavement Fork lift up to 5t

D2 LF On-pavement Fork lift over 5t


D5 LF (Reserved) Fork lift



D8 CB, LBG Gantry and pendant-controlled cranes

D9 LF Rough Terrain fork-lift up to 3t

D10 LF Rough Terrain fork-lift 3t to 5t

D11 LF Rough Terrain fork-lift over 5t

D12 C2 Self-propelled cranes

D13 LO Order picking truck

> 1300 647 200


�


Transition Tables

Part 1

'C' CODEWHSQ

TRANSLATION ARMY EQUIPMENT AND OTHER REQUIREMENTS NOTES

C1 LB, LL Tractors, Front end loader/ backhoe See Below

C2 LP Self propelled Scraper

C3 LZ Tracked Tractors, including backhoes

C4 LG Self-propelled Grader

C5 C2 (Reserved) Self-propelled crane up to 10t

C5A C6 Self-propelled crane over to 10t Usually 45t crane

C5B CB, LBG Gantry cranes

C6 - Tractor fitted with crane attachments

C7 LE Hydraulic excavator + See Below

C7A LE Cable operated excavator + See Below

C8 LR Self -propelled compaction equipment


Verification of loadshifting equipment used in crane mode or mobile crane certificate.

D CODEWHSQ

TRANSLATION ARMY EQUIPMENT NOTES

D1 LF On-pavement Fork lift up to 5t

D2 LF On Pavement Fork lift over 5t up to 10t


D5 LF Off Pavement Fork lift up to 2.5t

D6 LF Off Pavement Fork lift over 2.5t to 5t

D7 LF Off Pavement Fork lift over 5t

D9 LF Rough Terrain fork-lift up to 2.5t

D10 LF Rough Terrain fork-lift 2.5t to 5t

D11 LF Rough Terrain fork-lift over 5t

There are no equivalent certificates for Army codes A, B, F, G, M, P, Q, R, T.

NB: It should be noted that most “course reports” have “not competent” to sling loads with excavator or backhoe” endorsed in the report column.

TRANSLATION OF ARMY C & D LICENCES (PRE 1993) TO WH&S CERTIFICATE

> www.ohsa.com.au


�


Part 1

'RAAF CODEWHSQ

TRANSLATION RAAF EQUIPMENT AND OTHER REQUIREMENTS NOTES

LOADSHIFTING EQUIPMENT

(D)VEJ LF Forklift (A/C Loading)

(D)VEK LF Forklift (A/C Loading)

(D)VEL LF Forklift (Rough Terrain)

(D)VEM LF Forklift (All Terrain)

(C)VLF LZ Tractor, dozer, backhoe/loader

(C)VLF LB, LL Tractor, dozer, backhoe/loader + See Below

(C)VLM LE Excavator (Tracked) + See Below

(C)VLO LZ Dozer (Tracked)

(C)VLP LG Grader (Wheeled)

(C)VLS LS Skid Steer Loader (Heavy)

(C)VLT LS Skid Steer Loader (Light)


Verification of loadshifting equipment used in crane mode or mobile crane certificate.

CRANES NOTES(D)UXD CN Crane 4.5t (Crane half slew)

(D)VXF CN Crane 4.5t (Tractor mounted 4x4)

(D)VXB C2 On-pavement Fork lift over 10t


> 1300 647 200


�


Part 5Part 1

Transition Tables

TRANSLATION TABLE FOR OTHER LICENCES PREVIOUSLY ISSUED BY RAAF

LOADSHIFTING EQUIPMENT

PREVIOUS RAAF CODES RAAFCOURSE

WHSQ

TRANSLATIONRAAF EQUIPMENT & OTHER

REQUIREMENTSNOTES

WL1, (D)VWA, (D)MHE FLOP LF Forklift 1.8t (W/House)

WL1, (D)VDC, (D)MHE FLOP LF Forklift 2t (W/House)

WL1, (D)VDC FLOP LF Forklift 2.7t (W/House)

AL2, WL1, (G)VEL, (D)VEL FLOP LF Forklift 5t (Rough Terrain)

AL2, (D)VEJ, (D) VEK FLOP LF Forklift 8t (A/C Load)

AL2, (G)VEJ FLOP LF Forklift 8t (Short Mast)

AL2, (D)VEM FLOP LF Forklift 4t or 8t (All Terrain)

560, (L9) LF Forklift (Rough Terrain)

734. (L13) LO Forklift (Electric stock picker)

736, (L15) LO Forklift 300kg (Stacker Retrieve)

742, (L15) LO Forklift (Electric stock picker)

748, (L1) LF Forklift (Missile handling)

749, (L1) LF Forklift 8.0t (Ams 4.5t)

751, (L1) LF Forklift 2.7t (Explosives)

752, (L1) LF Forklift 1.8t

753, (L1) LF Forklift 2.7t

730, (L10) LF Forklift 1.5 (Electric)

731, (L11) LF Forklift 1.5t (Side loading)

740, (L12) LO Forklift (Electric stock picker)

756, (L7) LF Forklift 2.9t (Side loading)

757 (L3) LF Forklift 4.1t (Short mast)

758, (L3) LF Forklift (Aircraft maintenance)

J7, (D)VLF LZ Tractor, dozer, backhoe/loader

J7, (D)VLF LB Tractor, dozer, backhoe/loader + See

VERIFICATION OF LOADSHIFTING EQUIPMENT USED IN CRANE MODE OR MOBILE CRANE CERTIFICATE.CRANES

708(K1), (D)VXD HYDCRNOP CN Crane 4.5t (Tractor light 4x2)

380(K2), (D)VXF HYDCRNOP CN Crane (Light, Half slew)

306(K3), (D)VXB HYDCRNOP C2 Crane 10t (Full slew 6x6)

307(K5), (D)VXB HYDCRNOP C2 Crane (Rough terrain)

384(K5), (D)VXB HYDCRNOP C2 Crane 15t (Cross country 4x4)

718(K6), (D)VXF HYDCRNOP CN Crane (Strip clearance)NB.• G, D, J7, K5, L1 referees to the applicable licence code at that time;• 560, 742 Etc referees to the applicable vehicle code at that time;• FLOP is a one week forklift operators certificate course for operators of 1.8t. 2.7t 5.0t and 8.0t forklifts;• HYDCRNOP is a two weeks course for 15 t cranes and all classes below this capacity.

> www.ohsa.com.au


�0


TRANSLATION OF NAVY LICENCE TO WH&S CERTIFICATE

NAVY CODE NAVY ENDORSEMENT WHSQ TRANSLATION NOTESCranes – Pre 1993

C5 Self-propelled Cranes except Gantry Cranes up to 10t

With CNWith C2

See BelowSee Below

C5A Self-propelled Cranes except Gantry Cranes over to 10t

C2 or(With C6 to CO) See Below

Documentary evidence of the operation of a non-slewing crane with a capacity of more than 3 t. Documentary evidence of the type and size of crane operated :

(C2 for crane up to and including 20t or C6 for cranes above 20t to and including 60t or C1for cranes above 60t and including 100t or CO for cranes over 100t.)

CRANES AFTER 1993 WHSQ TRANSLATION NOTES

D12 Self-propelled Cranes except Gantry Cranes With CN or With C2 to CO

See BelowSee Below

E7 Cranes to 6 tonne With CN or With C2 to CO

See BelowSee BelowE8 Cranes to 10 tonne

E9 Cranes to 25 tonne With C6 See Below

E10 Cranes to 50 tonne

Documentary evidence of the operation of a non-slewing crane with a capacity of more than 3 t. Documentary evidence of the type and size of crane operated :

(C2 for crane up to and including 20t or C6 for cranes above 20t to and including 60t

LOADSHIFTING EQUIPMENTWHSQ

TRANSLATION NOTES

E4 Forklifts up to 2.5 tonnes LF

E5 Forklifts up to 5 tonnes LF

E6 Forklifts up to 10 tonnes LF

E2 Bulldozer LZ


Part 1

> 1300 647 200


��


Transition Tables

TRANSLATION OF NAVY LICENCE TO WH&S CERTIFICATEPressure Equipment

LICENCE CODE QUALIFICATION / EXPERIENCE ISSUES NOTES

EDP No 10030 Marine Technical Prop NIL Apprentice entry course

EDP No 13000 Auxiliary Machine Operation Certificate (AMOC) TO, ES Awarded to Marine Technical Personnel

- Certificate in Marine Propulsion Operation (Steam) TO, ES Includes EDP No 13000

EDP No 13010 Boiler Room Watch keeping Certificate BI

EDP No 13020 Engine Room Watch keeping Certificate TO, ES

- The Machinery Watch keepers Certificate (Steam) BI, TO, ES

EDP No 13030Machinery Charge Certificate (Steam)

BI, TO, ES Operation and maintenance of machinery and equipment in steam powered ships

EDP No 13040 Throttle Watch keeping Certificate TO, ES Awarded to Marine Technical Personnel

EDP No 13540 Experience (Details of boilers and equipment listed on Qualification) BI, TO, ES Awarded to Marine Technical Personnel




EDP No 13780 Skill Grade 2 - Marine Technical Propulsion Branch NIL

Awarded to Marine Technical PersonnelIssued on completion of Phase 2 Training

- Craftsman’s Certificate of Proficiency(Apprenticeship as Fitter & Turner)

Above as per Training Record

Record of Training lists Qualification i.e. EDP No 13000 Etc.

- Certificate in Marine Propulsion Maintenance NIL

- Advance Certificate in Marine Propulsion Maintenance NIL

- The Automatic Boiler Control Operation Course NIL Machinery Watchkeepers Trained to

Operate Automatic Boiler Systems

- The Marine Technical Phase One Course NIL

Part 1

> www.ohsa.com.au


��


Information to Applicants on the lodgement of formsfrom July 01 2008

Transition TablesAustralian Maritime Safety Authority Seagoing Qualifications from 11 July 1994. (Marine Orders Seagoing Qualifications Issue 4 Order No 7 of 1994)

AMSA QUALIFICATION & REQUIREMENT ISSUE NOTESEngineer Class 1 Certificate BI, TO ES

Engineer Class 2 Certificate BI, TO ES

Engineer Watch keeper Certificate (Steam) With TO With ES

See BelowSee Below

Engineer Class 3 Certificate With BB OR With BI OR With TO OR

With ES

See BelowSee BelowSee BelowSee Below

Marine Engine Driver Grade 1



Documentary evidence of the operation of a boiler with single fixed combustible air supply; or Documentary evidence of the operation of a boiler with super heaters or economisers or

modulating combustion air supply or modulating heat source Documentary evidence of having operated a turbine with a power output of 500KW or more Documentary evidence of having operated reciprocating steam engine with piston greater

than 250 millimetre

Australian Transport Advisory Council Uniform Shipping Law Code From 1/1/1991 (Uniform Shipping Laws Code Section 2)

AUSTRALIAN TRANSPORT ADVISORY COUNCIL QUALIFICATION ISSUE NOTES



With TO With ES

See BelowSee Below

Engineer Class 3 Certificate With BB OR With BI OR With TO OR

With ES

See BelowSee BelowSee BelowSee Below




Documentary evidence of the operation of a boiler with single fixed combustible air supply; or Documentary evidence of the operation of a boiler with super heaters or economisers or modulating combustion air supply or modulating heat sourceDocumentary evidence of having operated a turbine with a power output of 500KW or moreDocumentary evidence of having operated reciprocating steam engine with piston greater than 250 millimetres

Part 1

> 1300 647 200


��



NEW HIGH RISK WORK LICENCES

From 01 July 2008 a new licensing regime commences for High Risk Work Licences.

The following classes become classes for High Risk Work

LICENCE CODE CLASSBB Basic boiler operator

BI Intermediate boiler operator

BA Adavanced boiler operator

C2 Slewing mobile crane 20 tonnes or less



CO Slewing mobile crane over 100 tonnes

CB Bridge / Gantry crane

CD Derrick crane

CN Non-Slewing mobile crane greater than 3 tonnes

CP Portal boom crane

CT Tower crane

CV Vehicle loading crane - 10 m tonnes or more

DG Dogger

ES Reciprocating steam engine - piston diameter more than 250 mm

HM Materials hoist with cantilever platform

HP Materials or personnel hoist

LF Forklift truck - not pedestrian operated

LO Order picking truck

RB Basic rigger

RI Intermediate rigger

RA Advanced rigger

SB Basic scaffolder

SI Intermediate scaffolder

SA Advanced scaffolder

WP Work platform (boom 11m or more)

CS Self erecting tower crane

PB Truck concrete placing boom

TO Turbine with power output of 500 KW or more

Part 2

> www.ohsa.com.au


��



Part 2

LICENCE CODE CLASSLB Front-end loader backhoe (QLD > 2L engine capacity)

LBG Bridge / Gantry, 3 power remote control load over 5 t

LE Excavator (QLD > 2L engine capacity)

LL Front-end loader (QLD > 2L engine capacity)

LP Scraper

LR Road roller (QLD > 2L engine capacity)

LG Grader

LS Skid steer loader (QLD > 2L engine capacity)

LZ Dozer

High Risk Work Licence applications need to be lodged by the applicant at an Australian Post Outlet.

The High Risk Work Assessment Summary needs to be completed for these classes.

In addition these applicants will require a Statement of Attainment.

Applicants then attend an Australian Post outlet and complete a Form F1 Application.

Applicants also require a passport quality photograph and 100 points of identification.

The applicant will be provided with two Statements of Attainment as an original copy will be lodged with the Post Office.

Earthmoving and Particular Crane Certificates

From 1 July 08 the licence classes regulated in Queensland that do not fall within the National Standard are to be called Earthmoving and Particular Crane Certificates (EPCs).

The classes of work that will become EPCs are as follows:

OHSA will complete a 'G' form, an 'EPC' assessment summary and a Statement of Attainment and these documents are sent directly to DEIR

Enrolment Form

> 1300 647 200


��


Part 3

Black Coal enrolment Formpage 1 of 1

ALL TRAININGPhone: 1300 6472 00Fax: 1300 8529 70Email: [email protected] Registration No:31092

CREDIT TRANSFER FORM DEFENCE FORCES TO NATIONAL / WHSQ LICENCES(Please complete all relevant parts of this form)

PO Box 336Elanora Q 4221ABN- 73 833 631 941

LIST COAL COMPETENCIES (That you wish to Transfer to WH&S Tickets)

1.2.3.4.

DATE

/ /200

100 POINT ID PROVIDED (List which ID supplied & Point value)

1. Point Value

2. Point Value

3. Point Value

Family Name: Given Names:

Date of Birth: / / Gender: MALE: FEMALE:

Residential Address:

Post Code:

Telephone No: Mobile Phone:

Email Address: Emergency Contact No:

Place of Birth: AUSTRALIA OTHER COUNTRY (please specify)

Please indicate, tick (√), if any of the following conditions may hinder you from gaining this qualification.

This information will assist our training staff to determine required support.

Hearing Loss Reading Difficulties

Impaired Vision Learning Difficulties

Physical Disability OTHER (please specify below)

Trainee's signature:

Employment Status (please circle) EMPLOYER / SELF EMPLOYED / EMPLOYEE / UNEMPLOYEDCurrent Occupation: (trade etc)

Place of Work: (region) PROJECT

Employer's Trading Name: Phone No:

Address: Post Code:

PAYMENT DETAILS (Completed at Registration)

CASH CHEQUE EFTPOS COMPANY INVOICE EMPLOYMENT SERVICE

How did you find out about this course? NEWSPAPER BUSINESS CARD YELLOW PAGES

RADIO FRIEND OTHER

ACCOUNTS - Company invoice / receipts sent to ... (if different from above PLEASE PRINT)

Postal Address: Post Code:

Contact Name: Telephone No:

OFFICE USE ONLY

Trainee Enrolment No:

Receipt No: Invoice No:

5.6.7.8.

Enrolment Form


YOU WILL NEED TO MEET THE 100 POINT PROOF OF ID CRITERIA POINTS SUPPLIED YES / NOA) Birth or Citizen Certificate (Only present one of) 70 Points YES NO

B) Passport 70 Points YES NO

C) Drivers Licence 40 Points YES NO

D) ID Card issued to public employee 40 Points YES NO

E) ID card issued by the Department of Social Security 40 Points YES NO

F) Confirmation from employer 35 Points YES NO

G) Debit / Credit Card (one per financial institution) 35 Points YES NO

H) Store or Medicare Card 35 Points YES NO

I) Club Membership Card 35 Points YES NO

DEFENCE FORCES LICENCES TO NATIONAL CIVIL WH&S LICENCES (TICKETS) CHECKLIST

A) 100 point identification YES NO

B) Defence Forces certification YES NO

C) Defence Forces certification endorsed YES NO

D) Signed letter from authorising officer (optional) YES NO

DEFENCE FORCES CHECKLIST

The following points from each checklist must be completed before any Licences can be Transfered over to WH&S Licences

Coal Competencies to National WH&S LicencesCompetency and Proficiency

Part 4

Defence ForcesLicences to National Civil WH&SLicences & 100 Point ID Process Checklist

> www.ohsa.com.au


��


OHSA Occupational Health Services AustraliaPh: 1300 647 200

Fax: 1300 852 970

Email: [email protected]

Web: www.ohsa.com.au

Suite 32 8th Avenue Plaza1176 Gold Coast HighwayPALM BEACH QLD 4221

PO Box 336ELANORA QLD 4221AUSTRALIA

transfer defence force licences to national civil wh&s licences

Documents

g form form

hrwl assessment summary

credit transfers

translation tables

epc licence classes

defence force licences

particular certificate

assessment process