TEMPERATURE TRANSMITTER

1. Precision Digital PD312 Configurator

Model PD312 with Pt100 RTD SensorUniversal Input : RTD, TC, Ohm & mVOperating Temperature : -40 to 75C

Input : Universal RTD, TC, Resistance, or VoltageOutput : Two-wire 4-20 mA scalableAccuracy & Input Ranges : 0.08% of span typical, see table on page 10 for detailsTemperature Drift :RTD 0.004C/CTC 0.03C/CDisplay PV: 0.3" (8 mm) 5-digit LCD, Input & Units: 0.2" (5 mm)Bargraph :52 segments with 2% resolutionDecimal Point PV: 1 or none mA, %: Up to 3 decimalsBacklight :Loop-powered, always onProgramming Method :PDA8302 HART modem and PC software or field handheld HART communicatorUnder Range :3.8 mAOveer Range :20.5 mASensor Break :Selectable 3.6 mA Low Alarm or 22 mA High AlarmResponse Time :1 secondLong Term Stability :Better than 0.05% per yearStart Up Time :Less than 5 seconds

2. PT100 4-20mA Temperature Transmitter

REF: KI-KAL23PPT100 4-20 mA

Technical Data Input: PT100 BS EN 60751 100 ohms atCSensor Range: -200 to +850CMinimum Span: 20COutput: 3.8 to 22mA Max. Accuracy: +/- 0.1C +/-0.1% rdg over -100 to +500C+/- 0.2C +/-0.2% rdg over -200 to +850CIndication: Red LED indicates operation and sensor out of range.Supply: 8V TO 30V. Reverse connection protected.Ambient: 0 to 70C operating -40 to 70C storageLoop Resistance: 800r at 24V.Open Circuit: Upscale 22mA.

3. RTD In-Head Temperature Transmitter TX12

SPECIFICATIONS : InputSensor Type: Pt100 100 @ 0C 2 or 3 WireSensor Range:-200 to 850C (-328 to 1562F)Sensor Connection:Screw terminal Minimum Span:25C (77F)Linearisation:BS EN 60751(IEC 751) standard/JISC 1604Measurement Accuracy:0.1C 0.05% of readingThermal Drift:25 ppm/CExcitation Current: